kernel/git/stable/linux.git/fs/udf/inode.c, branch linux-3.13.y

truncate: drop 'oldsize' truncate_pagecache() parameter

2013-09-12T22:38:02+00:00

truncate_pagecache() doesn't care about old size since commit cedabed49b39 ("vfs: Fix vmtruncate() regression"). Let's drop it. Signed-off-by: Kirill A. Shutemov Cc: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

aio: don't include aio.h in sched.h

2013-05-08T03:16:25+00:00

Faster kernel compiles by way of fewer unnecessary includes. [akpm@linux-foundation.org: fix fallout] [akpm@linux-foundation.org: fix build] Signed-off-by: Kent Overstreet Cc: Zach Brown Cc: Felipe Balbi Cc: Greg Kroah-Hartman Cc: Mark Fasheh Cc: Joel Becker Cc: Rusty Russell Cc: Jens Axboe Cc: Asai Thambi S P Cc: Selvan Mani Cc: Sam Bradshaw Cc: Jeff Moyer Cc: Al Viro Cc: Benjamin LaHaise Reviewed-by: "Theodore Ts'o" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

udf: add extent cache support in case of file reading

2013-01-22T09:48:31+00:00

This patch implements extent caching in case of file reading. While reading a file, currently, UDF reads metadata serially which takes a lot of time depending on the number of extents present in the file. Caching last accessd extent improves metadata read time. Instead of reading file metadata from start, now we read from the cached extent. This patch considerably improves the time spent by CPU in kernel mode. For example, while reading a 10.9 GB file using dd: Time before applying patch: 11677022208 bytes (10.9GB) copied, 1529.748921 seconds, 7.3MB/s real 25m 29.85s user 0m 12.41s sys 15m 34.75s Time after applying patch: 11677022208 bytes (10.9GB) copied, 1469.338231 seconds, 7.6MB/s real 24m 29.44s user 0m 15.73s sys 3m 27.61s [JK: Fix bh refcounting issues, simplify initialization] Signed-off-by: Namjae Jeon Signed-off-by: Ashish Sangwan Signed-off-by: Bonggil Bak Signed-off-by: Jan Kara

udf: remove un-needed variable from inode_getblk

2012-12-13T15:33:23+00:00

The variable last_block is not needed. Signed-off-by: Namjae Jeon Signed-off-by: Ashish Sangwan Signed-off-by: Jan Kara

udf: don't increment lenExtents while writing to a hole

2012-12-13T15:33:23+00:00

Incrementing lenExtents even while writing to a hole is bad for performance as calls to udf_discard_prealloc and udf_truncate_tail_extent would not return from start if isize != lenExtents Signed-off-by: Namjae Jeon Signed-off-by: Ashish Sangwan Signed-off-by: Jan Kara

udf: fix memory leak while allocating blocks during write

2012-12-13T15:33:23+00:00

Need to brelse the buffer_head stored in cur_epos and next_epos. Signed-off-by: Namjae Jeon Signed-off-by: Ashish Sangwan Signed-off-by: Jan Kara

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

2012-10-04T16:14:01+00:00

Pull ext3 & udf fixes from Jan Kara: "Shortlog pretty much says it all. The interesting bits are UDF support for direct IO and ext3 fix for a long standing oops in data=journal mode." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: jbd: Fix assertion failure in commit code due to lacking transaction credits UDF: Add support for O_DIRECT ext3: Replace 0 with NULL for pointer in super.c file udf: add writepages support for udf ext3: don't clear orphan list on ro mount with errors reiserfs: Make reiserfs_xattr_handlers static

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2012-10-02T18:11:09+00:00

Pull user namespace changes from Eric Biederman: "This is a mostly modest set of changes to enable basic user namespace support. This allows the code to code to compile with user namespaces enabled and removes the assumption there is only the initial user namespace. Everything is converted except for the most complex of the filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs, nfs, ocfs2 and xfs as those patches need a bit more review. The strategy is to push kuid_t and kgid_t values are far down into subsystems and filesystems as reasonable. Leaving the make_kuid and from_kuid operations to happen at the edge of userspace, as the values come off the disk, and as the values come in from the network. Letting compile type incompatible compile errors (present when user namespaces are enabled) guide me to find the issues. The most tricky areas have been the places where we had an implicit union of uid and gid values and were storing them in an unsigned int. Those places were converted into explicit unions. I made certain to handle those places with simple trivial patches. Out of that work I discovered we have generic interfaces for storing quota by projid. I had never heard of the project identifiers before. Adding full user namespace support for project identifiers accounts for most of the code size growth in my git tree. Ultimately there will be work to relax privlige checks from "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing root in a user names to do those things that today we only forbid to non-root users because it will confuse suid root applications. While I was pushing kuid_t and kgid_t changes deep into the audit code I made a few other cleanups. I capitalized on the fact we process netlink messages in the context of the message sender. I removed usage of NETLINK_CRED, and started directly using current->tty. Some of these patches have also made it into maintainer trees, with no problems from identical code from different trees showing up in linux-next. After reading through all of this code I feel like I might be able to win a game of kernel trivial pursuit." Fix up some fairly trivial conflicts in netfilter uid/git logging code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits) userns: Convert the ufs filesystem to use kuid/kgid where appropriate userns: Convert the udf filesystem to use kuid/kgid where appropriate userns: Convert ubifs to use kuid/kgid userns: Convert squashfs to use kuid/kgid where appropriate userns: Convert reiserfs to use kuid and kgid where appropriate userns: Convert jfs to use kuid/kgid where appropriate userns: Convert jffs2 to use kuid and kgid where appropriate userns: Convert hpfs to use kuid and kgid where appropriate userns: Convert btrfs to use kuid/kgid where appropriate userns: Convert bfs to use kuid/kgid where appropriate userns: Convert affs to use kuid/kgid wherwe appropriate userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids userns: On ia64 deal with current_uid and current_gid being kuid and kgid userns: On ppc convert current_uid from a kuid before printing. userns: Convert s390 getting uid and gid system calls to use kuid and kgid userns: Convert s390 hypfs to use kuid and kgid where appropriate userns: Convert binder ipc to use kuids userns: Teach security_path_chown to take kuids and kgids userns: Add user namespace support to IMA userns: Convert EVM to deal with kuids and kgids in it's hmac computation ...

userns: Convert the udf filesystem to use kuid/kgid where appropriate

2012-09-21T11:18:54+00:00

Cc: Jan Kara Signed-off-by: Eric W. Biederman

UDF: Add support for O_DIRECT

2012-09-06T14:20:39+00:00

Add support for the O_DIRECT flag. There are two cases to deal with: 1. Small files stored in the ICB (inode control block?): just return 0 from the new udf_adinicb_direct_IO() handler to fall back to buffered I/O. 2. Larger files, not stored in the ICB: nothing special here. Just call blockdev_direct_IO() from our new udf_direct_IO() handler and tidy up any blocks instantiated outside i_size on error. This is pretty standard. Factor error handling code out of udf_write_begin() into new function udf_write_failed() so it can also be called by udf_direct_IO(). Also change the whitespace in udf_aops to make it a bit neater. Signed-off-by: Ian Abbott Signed-off-by: Jan Kara