kernel/git/stable/linux.git/include/asm-arm/arch-at91/hardware.h, branch master

[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

2008-08-07T08:55:48+00:00

This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King

[ARM] 5130/4: Support for the at91sam9g20

2008-07-10T11:13:47+00:00

Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Sedji Gaouaou Signed-off-by: Justin Waters Acked-by: Andrew Victor Signed-off-by: Russell King

[ARM] 4764/1: [AT91] AT91CAP9 core support

2008-01-26T15:01:13+00:00

Add support for Atmel's AT91CAP9 Customizable Microcontroller family. Signed-off-by: Stelian Pop Signed-off-by: Andrew Victor Signed-off-by: Russell King

[ARM] 4428/1: modify at91 includes to handle non-MMU at91x40 family

2007-07-12T10:11:25+00:00

Modify the common at91 hardware support to deal with the non-MMU at91x40 family. The base RAM (which is most likely not DRAM) is set to the configured value. Virtual IO device mapping is set to be 1 to 1 with the physical addresses. Signed-off-by: Greg Ungerer Acked-by: Andrew Victor Signed-off-by: Russell King

Merge branch 'fixes' into devel

2007-05-12T15:12:12+00:00

[ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors.

2007-05-11T20:07:54+00:00

Add support for Atmel's new AT91SAM9RL range of processors. Includes similar peripherals as other AT91SAM9 processors, but with a High-speed USB controller and various sizes of internal SRAM. Signed-off-by: Nicolas Ferre Signed-off-by: Andrew Victor Signed-off-by: Russell King

[ARM] 4369/1: AT91: Fix circular dependency in header files

2007-05-11T16:20:31+00:00

Resolve the circular dependency in the AT91 header files (io.h and hardware.h) by moving the at91_sys_read() and at91_sys_write() functions to io.h Signed-off-by: Andrew Victor Signed-off-by: Russell King

[ARM] 4231/1: AT91: Merge and typo fixes.

2007-02-22T14:53:30+00:00

The duplicate file "include/asm-arm/arch-at91rm9200/entry-macro.S" can be removed - it was already moved to include/asm-arm/arch-at91/. Fix 3 small typo's - two in comments, and the incorrect clock was specified for the LCD device. Signed-off-by: Andrew Victor Signed-off-by: Russell King

[ARM] 4145/2: AT91: Add support for AT91SAM9263 processor

2007-02-08T14:55:24+00:00

Add support for the Atmel AT91SAM9263 processor. It is similar to the AT91SAM9260 but with more integrated peripherals, 5 GPIO banks, etc. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor Signed-off-by: Russell King

[ARM] 4143/1: AT91: Prepare for AT91SAM9263 support

2007-02-08T14:55:22+00:00

The Atmel AT91SAM9263 processor includes many more integrated peripherals than Atmel's previous ARM9-based AT91 processors, so this has necessitated a few changes to the core AT91 support. These changes are: * The system peripheral I/O region we remap has increased from 0xFFFA0000..0xFFFFFFFF to 0xFFF78000..0xFFFFFFFF. * The increased I/O region forces changes to entry-macro.S and debug-macro.S due to ARM's limited immediate offset addressing modes. * Maximum number of GPIO banks increases to 5. * 2 MMC controllers so the board-setup code needs to specify which controller it wishes to use when calling at91_add_device_mmc(). Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor Signed-off-by: Russell King