kernel/git/stable/linux.git/include/asm-arm/arch-iop32x, branch master

[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

2008-08-07T08:55:48+00:00

This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King

[ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead

2008-08-07T08:40:08+00:00

Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King

[ARM] 5160/1: IOP3XX: gpio/gpiolib support

2008-07-09T22:31:42+00:00

This patch brings support for gpio/gpiolib framework to Intel IOP3xx platforms. Signed-off-by: Arnaud Patard Acked-by: Dan Williams Signed-off-by: Russell King

[ARM] 4476/1: EM7210/SS4000E support

2007-07-20T08:35:35+00:00

This patch adds the basic support for the em7210 board. It is similar to the iq31244 board and can be found on Intel "Baxter Creek" ss4000e nas. Signed-off-by: Arnaud Patard Signed-off-by: Russell King

iop3xx: surface the iop3xx DMA and AAU units to the iop-adma driver

2007-07-13T15:06:19+00:00

Adds the platform device definitions and the architecture specific support routines (i.e. register initialization and descriptor formats) for the iop-adma driver. Changelog: * add support for > 1k zero sum buffer sizes * added dma/aau platform devices to iq80321 and iq80332 setup * fixed the calculation in iop_desc_is_aligned * support xor buffer sizes larger than 16MB * fix places where software descriptors are assumed to be contiguous, only hardware descriptors are contiguous for up to a PAGE_SIZE buffer size * convert to async_tx * add interrupt support * add platform devices for 80219 boards * do not call platform register macros in driver code * remove switch() statements for compatible register offsets/layouts * change over to bitmap based capabilities * remove unnecessary ARM assembly statement * checkpatch.pl fixes * gpl v2 only correction * phys move to dma_async_tx_descriptor Cc: Russell King Signed-off-by: Dan Williams

[ARM] Fix iop32x/iop33x build

2007-05-11T16:20:06+00:00

arch/arm/plat-iop/io.c:26: error: conflicting types for '__iop3xx_ioremap' Signed-off-by: Russell King

fix file specification in comments

2007-05-09T06:58:16+00:00

Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Kleine-König Signed-off-by: Adrian Bunk

Merge branches 'arm-mm', 'at91', 'clkevts', 'imx', 'iop', 'misc', 'netx', 'ns9xxx', 'omap', 'pxa', 'rpc', 's3c' and 'sa1100' into devel

2007-05-06T19:57:51+00:00

[ARM] mm 7: remove duplicated __ioremap() prototypes

2007-05-05T10:57:39+00:00

Signed-off-by: Russell King

[ARM] 4348/4: iop3xx: Give Linux control over PCI initialization

2007-05-03T13:02:48+00:00

Currently the iop3xx platform support code assumes that RedBoot is the bootloader and has already initialized the ATU. Linux should handle this initialization for three reasons: 1/ The memory map that RedBoot sets up is not optimal (page_to_dma and virt_to_phys return different addresses). The effect of this is that using the dma mapping API for the internal bus dma units generates pci bus addresses that are incorrect for the internal bus. 2/ Not all iop platforms use RedBoot 3/ If the ATU is already initialized it indicates that the iop is an add-in card in another host, it does not own the PCI bus, and should not be re-initialized. Changelog: * rather than change nr_controllers to zero, simply do not call pci_common_init Cc: Lennert Buytenhek Signed-off-by: Dan Williams Signed-off-by: Russell King