kernel/git/stable/linux.git/include/asm-arm/arch-ixp4xx, branch master

[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

2008-08-07T08:55:48+00:00

This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King

[ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead

2008-08-07T08:40:08+00:00

Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King

[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board

2008-04-04T09:03:59+00:00

The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby Signed-off-by: Russell King

Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

2008-02-04T23:29:53+00:00

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option [ARM] 4821/1: RealView: Remove the platform dependencies from localtimer.c [ARM] 4820/1: RealView: Select the timer IRQ at run-time [ARM] 4819/1: RealView: Fix entry-macro.S to work with multiple platforms [ARM] 4818/1: RealView: Add core-tile detection [ARM] 4817/1: RealView: Move the AMBA resource definitions to realview_eb.c [ARM] 4816/1: RealView: Move the platform-specific definitions into board-eb.h [ARM] 4815/1: RealView: Add clockevents suport for the local timers [ARM] 4814/1: RealView: Add broadcasting clockevents support for ARM11MPCore [ARM] 4813/1: Add SMP helper functions for clockevents support [ARM] 4812/1: RealView: clockevents support for the RealView platforms [ARM] 4811/1: RealView: clocksource support for the RealView platforms [ARM] 4736/1: Export atags to userspace and allow kexec to use customised atags [ARM] 4798/1: pcm027: fix missing header file [ARM] 4803/1: pxa: fix building issue of poodle.c caused by patch 4737/1 [ARM] 4801/1: pxa: fix building issues of missing pxa2xx-regs.h [ARM] pxa: introduce sysdev for pxa3xx static memory controller [ARM] pxa: add preliminary suspend/resume code for pxa3xx [ARM] pxa: introduce sysdev for GPIO register saving/restoring [ARM] pxa: introduce sysdev for IRQ register saving/restoring ...

[ARM] 4807/2: ixp4xx: Merge nslu2-power.c into nslu2-setup.c

2008-02-04T13:15:26+00:00

There is no reason to have power control in a separate file from the board setup code. Merge it back into the board setup file, removing superfluous header includes and removing superfluous constants from the machine header file. -- Signed-off-by: Rod Whitby Signed-off-by: Russell King

[ARM] 4714/2: Headers for IXP4xx built-in Ethernet and WAN drivers

2008-02-04T13:15:25+00:00

Adds platform structs and #defines required by drivers for IXP4xx built-in Ethernet and WAN (sync serial) ports. The actual drivers will reside in drivers/net/arm and drivers/net/wan and will be submitted separately. Signed-off-by: Krzysztof Halasa Signed-off-by: Rod Whitby Signed-off-by: Russell King

[ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features

2008-02-04T13:15:25+00:00

This patch adds drivers for IXP4xx hardware Queue Manager and for Network Processor Engines. Requires patch #4712 (reading/writing CPU feature (aka fuse) bits). Posted to linux-arm-kernel on 2 Dec 2007 and revised. Signed-off-by: Krzysztof Halasa Signed-off-by: Russell King

[ARM] 4712/2: Adds functions to read and write IXP4xx "feature" bits

2008-02-04T13:15:25+00:00

Adds functions to read and write IXP4xx "feature" (aka "fuse") bits, containing information about available/enabled CPU features. The uncompress.h included by boot/compressed/misc.c resides in a different space than rest of the kernel and thus can't use asm/hardware.h (including asm/arch/cpu.h - which, in turn, may use EXPORTed symbol "processor_id"). Posted to linux-arm-kernel on 2 Dec 2007 and revised. Signed-off-by: Krzysztof Halasa Signed-off-by: Russell King

[ARM] 4769/2: ixp4xx: Button updates for the dsmg600 board

2008-02-04T13:15:24+00:00

* Remove the superfluous declaration of ctrl_alt_del(). * Convert GPIO and IRQ handling to use the api. * Perform the reset on the release of the power button, so that NAS devices which have been set to auto-power-on (by solder bridging the power button) do not continuously power cycle. * Remove all superflous constants from dsmg600.h Signed-off-by: Rod Whitby Acked-by: Lennert Buytenhek Signed-off-by: Russell King

[ARM] 4768/2: ixp4xx: Button and LED updates for the nas100d board

2008-02-04T13:15:23+00:00

* Convert GPIO and IRQ handling to use the api. * Perform the reset only after the power button has been held down for at least two seconds. Do the reset on the release of the power button, so that NAS devices which have been set to auto-power-on (by solder bridging the power button) do not continuously power cycle. * Remove all superflous constants from nas100d.h * Add LED constants to nas100d.h while we're there. * Update the board LED setup code to use those constants. Signed-off-by: Rod Whitby Acked-by: Lennert Buytenhek Signed-off-by: Russell King