kernel/git/stable/linux.git/include/asm-arm/arch-ns9xxx, branch master

[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

2008-08-07T08:55:48+00:00

This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King

[ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead

2008-08-07T08:40:08+00:00

Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King

[ARM] Fix explicit asm(-arm)?/arch-foo references

2008-08-02T21:35:16+00:00

No file should be explicitly referencing its own platform headers by specifying an absolute include path. Fix these paths to use standard includes. Signed-off-by: Russell King

ns9xxx: fix assembler version of __REG2 to be consistent with the C version

2008-05-30T08:46:11+00:00

It's not very critical because __REG2 isn't used in assembler code currently. Additionally some white space noise is fixed. Signed-off-by: Uwe Kleine-König

ns9xxx: let putc autodetect where to write

2008-03-31T06:17:01+00:00

Now putc writes to the first enabled internal UART. If there is none the external UART on the a9m9750dev board is used (if enabled). Otherwise there is no output. Signed-off-by: Uwe Kleine-König

ns9xxx: prepare for adding support for Digi ns921x processors

2008-03-31T06:17:01+00:00

The hardware team changed some things that were taken as being common to all ns9xxx processors up to now. This patch addresses: - irqs: s/IRQ_/IRQ_NS9360_/ - system module registers: some registers are still general, their definition lives now in include/asm-arm/arch-ns9xxx/regs-sys-common.h. The ns9360 specific ones are in .../regs-sys-ns9360.h As a result ns9360_systemclock cannot be static inline any more as its definition needs regs-sys-ns9360.h. This becomes a real problem when adding support for ns9215 as this will need regs-sys-ns9215.h and including both files will not work. For the same reason ns9360_reset() is now non-inline and gpio functions live in their own file. - register mapping: s/ns9xxx_map_io/ns9360_map_io/ - timer registers: move time.c to time-ns9360.c; s/ns9xxx_timer/ns9360_timer/ Signed-off-by: Uwe Kleine-König

ns9xxx: add module_is_..., processor_is_... and board_is_... for many machs

2008-03-31T06:17:01+00:00

Most of the machines are not yet supported, but I have to start somewhere. Signed-off-by: Uwe Kleine-König

ns9xxx: Use get_irqnr_preamble to initialize base register

2008-03-31T06:17:01+00:00

This patch optimizes the irq handling a bit. Now the base register is only computed once if more than one irq is pending. Signed-off-by: Uwe Kleine-König

[ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32

2007-10-12T22:43:41+00:00

As a consequence registers are now accessed with __raw_{read,write}[bl]. Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King

[ARM] 4591/1: ns9xxx: simplify REGSET, REGGET and introduce ..._IDX variants

2007-10-12T22:43:36+00:00

The semantic of the REGSET macros didn't change, but hopefully it's more obvious as it's now. REGGET is changed to return the unshifted value, analogous to REGSET. REGGETIM behaves as REGGET before. All callers changed. ..._IDX is used to work with registers that need a parameter like BBU_GCONFb1. Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King