kernel/git/stable/linux.git/include/asm-sh/r7780rp.h, branch master

sh: migrate to arch/sh/include/

2008-07-28T23:09:44+00:00

This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac. Most of the moving about was done with Sam's directions at: http://marc.info/?l=linux-sh&m=121724823706062&w=2 with subsequent hacking and fixups entirely my fault. Signed-off-by: Sam Ravnborg Signed-off-by: Paul Mundt

sh: r7780rp: Kill off unneded ifdefs for irq setup.

2008-05-08T10:51:44+00:00

Signed-off-by: Paul Mundt

sh: Hook up remaining IRQ sources for R7780MP FPGA.

2008-04-18T16:50:01+00:00

Signed-off-by: Masayuki Hosokawa Signed-off-by: Paul Mundt

sh: trapped io support for highlander V2

2008-02-14T05:22:09+00:00

This patch converts the highlander CF device from good old machvec readb/writeb to the new shiny trapped io. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt

sh: update r7780rp interrupt code

2008-01-28T07:24:01+00:00

This patch updates the board specific irq code for r7780rp. The new code is very similar to the other highlander implementations, with the exception that the r7780rp handles pci interrupts using IRL. To simplify the pci code and use the same interrupt numbers as r7780mp and r7785rp we hook in to the cpu specific pci vectors. The pci interrupts and the push switch all work well with and without this patch. CF and AX88796 are not ok though and the source of the problem is unknown at this point. The AX88796 does for not detect it's proper mac address (IPL gets it right) and the kernel hangs on CF access. As a workaround this patch removes the CF and the AX88796 from the platform datain case of r7780rp. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt

sh: r7785rp: Hook up the rest of the HL7785 FPGA IRQ vectors.

2008-01-28T04:19:03+00:00

Signed-off-by: Paul Mundt

sh: intc - rework higlander irq code for r7780mp and r7785rp

2007-09-21T02:57:52+00:00

This patch reworks the highlander irq code for r7780mp and r7785rp. The same strategy as for the new R2D code is used here - the board specific interrupts are now starting from HL_FPGA_IRQ_BASE. The code for r7780rp is not touched due to lack of hardware. Tested with CF, AX88796 on r7780mp and r7785rp. The touch switch interrupt has also been tested on r7780mp. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt

sh: R7785RP board updates.

2007-05-07T02:11:57+00:00

Some fixups for the R7785RP board. Gets iVDR working. Signed-off-by: Ryusuke Sakato Signed-off-by: Paul Mundt

sh: Fix r7780rp build.

2007-05-07T02:11:57+00:00

With the addition of the R7780MP and R7785RP, the R7780RP build ended up breaking. Trivial compile fix. Signed-off-by: Paul Mundt

sh: Add SH7785 Highlander board support (R7785RP).

2007-05-07T02:10:53+00:00

This adds preliminary support for the SH7785-based Highlander board. Some of the Highlander support code is reordered so that most of it can be reused directly. This also plugs in missing SH7785 checks in the places that need it, as this is the first board to support the CPU. Signed-off-by: Paul Mundt