kernel/git/stable/linux.git/include/dt-bindings/power, branch linux-6.3.y

Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-02-27T18:04:49+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...

Merge tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

2023-02-13T15:22:33+00:00

More Qualcomm driver updates for 6.3 The qcom_scm.h file is moved into firmware/qcom, to avoid having any Qualcomm-specific files directly in include/linux. Support for PMIC GLINK is introduced, which on newer Qualcomm platforms provides an interface to the firmware implementing battery management and USB Type-C handling. Together with the base driver comes the custom altmode support driver. SMD RPM gains support for IPQ9574, and socinfo is extended with support for revision 17 of the information format and soc_id for IPQ5332 and IPQ8064 are added. The qcom_stats is changes not to fail when not all parts are initialized. * tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support soc: qcom: pmic_glink: Introduce base PMIC GLINK driver dt-bindings: soc: qcom: Introduce PMIC GLINK binding soc: qcom: dcc: Drop driver for now Link: https://lore.kernel.org/r/20230210182242.2023901-1-andersson@kernel.org Signed-off-by: Arnd Bergmann

Merge tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

2023-02-13T15:21:41+00:00

Qualcomm driver updates for v6.3 This introduces a new driver for the Data Capture and Compare block, which provides a mechanism for capturing hardware state (access MMIO registers) either upon request of triggered automatically e.g. upon a watchdog bite, for post mortem analysis. The remote filesystem memory share driver gains support for having its memory bound to more than a single VMID. The SCM driver gains the minimal support needed to support a new mechanism where secure world can put calls on hold and later request them to be retried. Support for the new SA8775P platform is added to rpmhpd, QDU1000 is added to the SCM driver and a long list of platforms are added to the socinfo driver. Support for socinfo data revision 16 is also introduced. Lastly a driver to program the ramp controller in MSM8976 is introduced. * tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits) firmware: qcom: scm: Add wait-queue handling logic dt-bindings: firmware: qcom,scm: Add optional interrupt Revert "dt-bindings: power: rpmpd: Add SM4250 support" Revert "soc: qcom: rpmpd: Add SM4250 support" soc: qcom: socinfo: Add a bunch of older SoCs dt-bindings: arm: qcom,ids: Add a bunch of older SoCs dt-bindings: arm: qcom,ids: Add QRD board ID soc: qcom: socinfo: Fix soc_id order dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings soc: qcom: rmtfs: Optionally map RMTFS to more VMs dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible dt-bindings: firmware: qcom,scm: narrow clocks and interconnects dt-bindings: firmware: qcom,scm: document MSM8226 clocks soc: qcom: ramp_controller: Make things static soc: qcom: rmphpd: add power domains for sa8775p dt-bindings: power: qcom,rpmpd: document sa8775p PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe() soc: qcom: dcc: rewrite description of dcc sysfs files ... Link: https://lore.kernel.org/r/20230126163008.3676950-1-andersson@kernel.org Signed-off-by: Arnd Bergmann

dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1

2023-02-09T03:29:46+00:00

Add define for another power saving state used on SM8350 for the GPU. Signed-off-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230206145707.122937-3-dmitry.baryshkov@linaro.org

Merge tag 'v6.2-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/drivers

2023-02-03T13:22:19+00:00

Introduce MediaTek regulator coupler driver to ensure that the SRAM voltage in par with the GPU voltage. This allows for a stable use of the GPU. mtk-mutex: - add support for MT8188 vdosys0 path - allow it to be build as module - add support for MT8195 vdosys1 path mmsys: - add MT8188 vdosys0 path - allow to be build as a module - add MT8195 vdosys1 path - add support for CMDQ - allow for up to 64 reset bits - add supprot for the MT8195 vppsys[0,1] pathes pm-domains: - keep power for the MT8186 ADSP on by default - add support for MT8188 - add support for buck isolation needed in specific pm-domains for MT8188 and MT8192 mtk-svs: - enable IRQ later to allow using kexec - several improvments on the code base - fix modalias pmic wrapper: - convert binding to yaml. As this is thightly coupled to the MT6357 PMIC, I took patches regarding it as well. * tag 'v6.2-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (41 commits) soc: mediatek: mtk-svs: add missing MODULE_DEVICE_TABLE soc: mediatek: mtk-devapc: Switch to devm_clk_get_enabled() soc: mtk-svs: mt8183: refactor o_slope calculation soc: mediatek: mtk-svs: delete superfluous platform data entries soc: mediatek: mtk-svs: move svs_platform_probe into probe soc: mediatek: mtk-svs: improve readability of platform_probe soc: mediatek: mtk-svs: clean up platform probing soc: mediatek: mtk-svs: keep svs alive if CONFIG_DEBUG_FS not supported soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01() soc: mediatek: mtk-svs: reset svs when svs_resume() fail soc: mediatek: mtk-svs: restore default voltages when svs_init02() fail soc: mediatek: mmsys: add support for MT8195 VPPSYS dt-bindings: arm: mediatek: mmsys: Add support for MT8195 VPPSYS soc: mediatek: Introduce mediatek-regulator-coupler driver soc: mediatek: mtk-svs: Enable the IRQ later soc: mediatek: add mtk-mutex support for mt8195 vdosys1 soc: mediatek: add mtk-mutex component - dp_intf1 soc: mediatek: mmsys: add reset control for MT8195 vdosys1 soc: mediatek: mmsys: add mmsys for support 64 reset bits soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1 ... Link: https://lore.kernel.org/r/396d51fc-81f3-4a2b-d7a7-b966bfe3002a@gmail.com Signed-off-by: Arnd Bergmann

Merge tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt

2023-01-30T22:08:40+00:00

Amlogic ARM64 DT changes for v6.3: - Merge of immutable bindings branch with Reset & power domain binding - New boards: - Odroid-N2L (Smaller version of Odroid-N2+) - BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi) - Radxa Zero2 (New version of Radza Zero with A311D SoC) - Add DT node for the VIPNano-QI on the A311D - DT bindings fixups covering all SoC families - MAC address nodes - ethernet PHY node name - scpi & child node names - SD/SDIO node name - USB supply name - invalid clock-names - rng node name - rtc node name - ETH phy mux node name - button & adc keys node name - leds node names - RK818 pmic properties - remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1 - Fix WiFi/Bt definition around P212 & Khadas VIM1 - Add audio node to P212 - Fix FAN trip definition to Odroid-HC4 - Fix gpio-fan gpios definition - Permit Radxa Zero OTG on USB1 - Fix VDDIO_C enable gpio by using OPEN DRAIN flag * tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (43 commits) arm64: dts: meson: add support for Radxa Zero2 dt-bindings: arm: amlogic: add support for Radxa Zero2 arm64: dts: meson: add support for BananaPi M2-Pro dt-bindings: arm: amlogic: add support for BananaPi M2-Pro arm64: dts: meson: bananapi-m5: convert dts to dtsi arm64: dts: meson: bananapi-m5: remove redundant status from sound node arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN arm64: dts: meson: radxa-zero: allow usb otg mode arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L arm64: dts: meson-g12b: move common node into new odroid.dtsi dt-bindings: arm: amlogic: document Odroid-N2L arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip arm64: dts: meson: add audio playback to S905X-P212 dts arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1 arm64: dts: meson: move pwm_ef node in P212 dtsi arm64: dts: meson: add Broadcom WiFi to P212 dtsi arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name ... Link: https://lore.kernel.org/r/c1641ffd-71c9-9ac9-89d9-c22da4acea10@linaro.org Signed-off-by: Arnd Bergmann

Merge tag 'amlogic-drivers-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers

2023-01-30T16:10:27+00:00

Amlogic Drivers changes for v6.3: - Merge of immutable bindings branch with Reset & power domain binding - Addition of NNA power domain for A311D SoC - meson_sm.txt conversionto dt-schema - mark amlogic,meson-gx-pwrc bindings as deprecated - fix of meson_sm driver by using NULL instead of 0 * tag 'amlogic-drivers-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: firmware: meson_sm: stop using 0 as NULL pointer dt-bindings: power: amlogic,meson-gx-pwrc: mark bindings as deprecated dt-bindings: firmware: convert meson_sm.txt to dt-schema soc: amlogic: meson-pwrc: Add NNA power domain for A311D dt-bindings: power: Add G12A NNA power domain dt-bindings: reset: meson-g12a: Add missing NNA reset Link: https://lore.kernel.org/r/ec9552d8-96df-a677-ab94-9723f5c30f1c@linaro.org Signed-off-by: Arnd Bergmann

Merge tag 'sunxi-drivers-for-6.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/drivers

2023-01-30T15:12:12+00:00

- introduce Allwinner PPU driver - limit iteration in sram debugfs * tag 'sunxi-drivers-for-6.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: soc: sunxi: Add Allwinner D1 PPU driver dt-bindings: power: Add Allwinner D1 PPU soc: sunxi: sram: Only iterate over SRAM children Link: https://lore.kernel.org/r/Y9RXXATRNqEv0GJT@jernej-laptop Signed-off-by: Arnd Bergmann

Merge tag 'riscv-soc-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers

2023-01-30T15:08:36+00:00

RISC-V SoC drivers for v6.3-mw0 It's all StarFive stuff this time: Their new JH7110 SoC uses a SiFive core complex, and therefore a SiFive cache controller too. That needed a compatible added to both the binding and driver. The JH7110 also has power domains, which are supported by a new driver and a corresponding dt-binding. Signed-off-by: Conor Dooley * tag 'riscv-soc-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: soc: starfive: Add StarFive JH71XX pmu driver dt-bindings: power: Add starfive,jh7110-pmu soc: sifive: ccache: Add StarFive JH7110 support dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC Link: https://lore.kernel.org/r/Y9LNIm9pkr+Owv/e@spud Signed-off-by: Arnd Bergmann

dt-bindings: power: Add Allwinner D1 PPU

2023-01-27T22:20:30+00:00

The Allwinner D1 family of SoCs contain a PPU power domain controller separate from the PRCM. It can power down the video engine and DSP, and it contains special logic for hardware-assisted CPU idle. Other recent Allwinner SoCs (e.g. TV303) have a PPU with a different set of domains. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Samuel Holland Link: https://lore.kernel.org/r/20230126063419.15971-2-samuel@sholland.org Signed-off-by: Jernej Skrabec