<feed xmlns='http://www.w3.org/2005/Atom'>
<title>kernel/git/stable/linux.git/include/media/v4l2-chip-ident.h, branch master</title>
<subtitle>Linux kernel stable tree</subtitle>
<id>https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/atom?h=master</id>
<link rel='self' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/atom?h=master'/>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/'/>
<updated>2013-06-21T13:46:44+00:00</updated>
<entry>
<title>[media] v4l2-core: remove support for obsolete VIDIOC_DBG_G_CHIP_IDENT</title>
<updated>2013-06-21T13:46:44+00:00</updated>
<author>
<name>Hans Verkuil</name>
<email>hans.verkuil@cisco.com</email>
</author>
<published>2013-05-26T13:03:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b71c99801e18eb172ae34851daf25044a3bf644a'/>
<id>urn:sha1:b71c99801e18eb172ae34851daf25044a3bf644a</id>
<content type='text'>
This has been replaced by the new and much better VIDIOC_DBG_G_CHIP_INFO.

Signed-off-by: Hans Verkuil &lt;hans.verkuil@cisco.com&gt;
Signed-off-by: Mauro Carvalho Chehab &lt;mchehab@redhat.com&gt;
</content>
</entry>
<entry>
<title>[media] saa7115: add detection code for gm7113c</title>
<updated>2013-05-21T11:24:31+00:00</updated>
<author>
<name>Mauro Carvalho Chehab</name>
<email>mchehab@redhat.com</email>
</author>
<published>2013-04-26T13:22:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b11460b0532dd22830a9f2fcdcad91b790c6b35b'/>
<id>urn:sha1:b11460b0532dd22830a9f2fcdcad91b790c6b35b</id>
<content type='text'>
Adds a code that (auto)detects gm7113c clones. The auto-detection
here is not perfect, as, on contrary to what it would be expected
by looking into its datasheets some devices would return, instead:
	saa7115 0-0025: chip 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 @ 0x4a is unknown
(found on a device labeled as GM7113C 1145 by Ezequiel Garcia)

Signed-off-by: Mauro Carvalho Chehab &lt;mchehab@redhat.com&gt;
Tested-by: Jon Arne Jørgensen &lt;jonarne@jonarne.no&gt;
Tested-by: Ezequiel Garcia &lt;ezequiel.garcia@free-electrons.com&gt;
Signed-off-by: Hans Verkuil &lt;hans.verkuil@cisco.com&gt;
Signed-off-by: Mauro Carvalho Chehab &lt;mchehab@redhat.com&gt;
</content>
</entry>
<entry>
<title>[media] media: ths7353: add support for ths7353 video amplifier</title>
<updated>2013-03-21T17:04:47+00:00</updated>
<author>
<name>Lad, Prabhakar</name>
<email>prabhakar.lad@ti.com</email>
</author>
<published>2013-02-18T10:56:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=88da0183eb2b72048099b4e0ecae1705f5309c94'/>
<id>urn:sha1:88da0183eb2b72048099b4e0ecae1705f5309c94</id>
<content type='text'>
The patch adds support for THS7353 video amplifier.
The the THS7353 amplifier is very much similar to the
existing THS7303 video amplifier driver.
This patch appropriately makes changes to the existing
ths7303 driver and adds support for the THS7353.
This patch also adds V4L2_IDENT_THS7353 for the THS7353
chip and appropriate changes to Kconfig file for building.

Signed-off-by: Lad, Prabhakar &lt;prabhakar.lad@ti.com&gt;
Signed-off-by: Hans Verkuil &lt;hans.verkuil@cisco.com&gt;
Signed-off-by: Martin Bugge &lt;marbugge@cisco.com&gt;
Signed-off-by: Mauro Carvalho Chehab &lt;mchehab@redhat.com&gt;
</content>
</entry>
<entry>
<title>[media] bttv: add VIDIOC_DBG_G_CHIP_IDENT</title>
<updated>2013-03-05T17:00:16+00:00</updated>
<author>
<name>Hans Verkuil</name>
<email>hans.verkuil@cisco.com</email>
</author>
<published>2012-09-09T12:23:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1b9e94dc69959e963fe57ede46259f792641af4d'/>
<id>urn:sha1:1b9e94dc69959e963fe57ede46259f792641af4d</id>
<content type='text'>
VIDIOC_DBG_G_CHIP_IDENT is a prerequisite for the G/S_REGISTER ioctls.
In addition, add support to call G/S_REGISTER for supporting i2c devices.

Signed-off-by: Hans Verkuil &lt;hans.verkuil@cisco.com&gt;
Signed-off-by: Mauro Carvalho Chehab &lt;mchehab@redhat.com&gt;
</content>
</entry>
<entry>
<title>[media] ad9389b: driver for the Analog Devices AD9389B video encoder</title>
<updated>2012-09-13T19:15:36+00:00</updated>
<author>
<name>Hans Verkuil</name>
<email>hans.verkuil@cisco.com</email>
</author>
<published>2012-07-18T08:46:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=117a55b69d36a19028d1c59a737ad1246a0a75ad'/>
<id>urn:sha1:117a55b69d36a19028d1c59a737ad1246a0a75ad</id>
<content type='text'>
Initial version of this driver.

The full datasheets are available from the Analog Devices website:

  http://ez.analog.com/docs/DOC-1741

Not all features of the receiver are supported by this driver for various
reasons. Most notably:

- No CEC support (the CEC API needs a lot more discussion)
- No HDCP repeater support (we don't use that either)

I'm sure that there are more things missing, but this driver does work
well for our hardware.

Note that I am using the register addresses instead of register names: the
datasheet containing the register descriptions is organized by register
address. Using names would make the datasheet lookup very hard. An attempt
was made to try and document what is being done when registers are used
instead.

Signed-off-by: Hans Verkuil &lt;hans.verkuil@cisco.com&gt;
Signed-off-by: Mauro Carvalho Chehab &lt;mchehab@redhat.com&gt;
</content>
</entry>
<entry>
<title>[media] adv7604: driver for the Analog Devices ADV7604 video decoder</title>
<updated>2012-09-13T19:13:47+00:00</updated>
<author>
<name>Hans Verkuil</name>
<email>hans.verkuil@cisco.com</email>
</author>
<published>2012-07-18T08:45:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=54450f591c9927496b3d41c041fa802d0ef96885'/>
<id>urn:sha1:54450f591c9927496b3d41c041fa802d0ef96885</id>
<content type='text'>
Initial version of this driver.

The full datasheets are available from the Analog Devices website:

  http://ez.analog.com/docs/DOC-1545

Not all features of the receiver are supported by this driver for various
reasons. Most notably:

- No CEC support (the CEC API needs a lot more discussion)
- Only port A of the four HDMI input ports is implemented (our hardware only
  uses that port)
- No HDCP repeater support (we don't use that either)

And since there are some 600-odd pages of datasheet for this single device,
I'm sure that there are many more things missing, but this driver does work
well for our hardware.

Note that I am using the register addresses instead of register names: the
datasheet containing the register descriptions is organized by register
address. Using names would make the datasheet lookup very hard. An attempt
was made to try and document what is being done when registers are used
instead.

Signed-off-by: Hans Verkuil &lt;hans.verkuil@cisco.com&gt;
Signed-off-by: Mauro Carvalho Chehab &lt;mchehab@redhat.com&gt;
</content>
</entry>
<entry>
<title>[PATCH] media: add Analog Devices ADV7393 video encoder driver</title>
<updated>2012-07-06T18:46:17+00:00</updated>
<author>
<name>Benoît Thébaudeau</name>
<email>benoit.thebaudeau@advansee.com</email>
</author>
<published>2012-06-28T15:12:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ebc04047b398d415627f82653c4e722e8fc2c083'/>
<id>urn:sha1:ebc04047b398d415627f82653c4e722e8fc2c083</id>
<content type='text'>
Add ADV7393 I²C-based video encoder driver. This driver has been tested on
custom hardware. It has been tested for composite output. It is derived from the
ADV7343 driver.

Signed-off-by: Benoît Thébaudeau &lt;benoit.thebaudeau@advansee.com&gt;
Signed-off-by: Mauro Carvalho Chehab &lt;mchehab@redhat.com&gt;
</content>
</entry>
<entry>
<title>[media] vs6624: add vs6624 sensor driver</title>
<updated>2012-03-19T18:04:26+00:00</updated>
<author>
<name>Scott Jiang</name>
<email>scott.jiang.linux@gmail.com</email>
</author>
<published>2012-03-08T20:44:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f877ed9780f43da51a4544e5b90b7f4a145964ff'/>
<id>urn:sha1:f877ed9780f43da51a4544e5b90b7f4a145964ff</id>
<content type='text'>
This is a v4l2 sensor-level driver for the ST VS6624 camera.

Signed-off-by: Scott Jiang &lt;scott.jiang.linux@gmail.com&gt;
Signed-off-by: Mauro Carvalho Chehab &lt;mchehab@redhat.com&gt;
</content>
</entry>
<entry>
<title>[media] adv7183: add adv7183 decoder driver</title>
<updated>2012-03-19T18:04:10+00:00</updated>
<author>
<name>Scott Jiang</name>
<email>scott.jiang.linux@gmail.com</email>
</author>
<published>2012-03-08T20:44:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=202ea1f05b15e9fee05426d5c6f1d16201d4687f'/>
<id>urn:sha1:202ea1f05b15e9fee05426d5c6f1d16201d4687f</id>
<content type='text'>
This driver is a v4l2 subdevice driver to support Analog Devices ADV7183 SDTV video decoder.

Signed-off-by: Scott Jiang &lt;scott.jiang.linux@gmail.com&gt;
Signed-off-by: Mauro Carvalho Chehab &lt;mchehab@redhat.com&gt;
</content>
</entry>
<entry>
<title>[media] noon010pc30: Remove g_chip_ident operation handler</title>
<updated>2011-09-21T17:31:34+00:00</updated>
<author>
<name>Sylwester Nawrocki</name>
<email>s.nawrocki@samsung.com</email>
</author>
<published>2011-06-28T13:13:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6783fe5f16c2fa9b474f096f66b3c8101fc48714'/>
<id>urn:sha1:6783fe5f16c2fa9b474f096f66b3c8101fc48714</id>
<content type='text'>
It is now not needed as the sensor identification is done
through the media controller API.

Signed-off-by: Sylwester Nawrocki &lt;s.nawrocki@samsung.com&gt;
Signed-off-by: Kyungmin Park &lt;kyungmin.park@samsung.com&gt;
Signed-off-by: Mauro Carvalho Chehab &lt;mchehab@redhat.com&gt;
</content>
</entry>
</feed>
