kernel/git/stable/linux.git/include/scsi/libsas.h, branch linux-7.2.y

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2026-08-02T16:32:07+00:00

Pull SCSI fixes from James Bottomley" "No core changes. The largest driver fix is the reversion of threaded interrupt handlers in UFS and the next is the resume deadlock fix in hisi_sas which extends into libsas" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Initialize hba->rpmbs list in ufshcd scsi: mpi3mr: Fix potential deadlock in mpi3mr_fault_uevent_emit scsi: target: Clear cmd_cnt when initial counter enrollment fails scsi: zfcp: Fix memory leak during adapter release by destroying gid_pn_req scsi: ufs: core: Revert "Delegate the interrupt service routine to a threaded IRQ handler" scsi: ufs: core: Cancel RTC work in active-active suspend scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE scsi: ufs: dt-bindings: Add missing mcq reg for qcom,sa8255p-ufshc scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer

scsi: libsas: terminate deferred commands on time out

2026-07-29T01:52:04+00:00

If a command times out while we have deferred non-NCQ commands waiting to be issued, the SCSI EH task is not immediately woken up as the waiting deferred commands are never issued nor completed, thus leaving the SCSI host in a busy state (shost->host_failed != scsi_host_busy(shost)) which prevents the SCSI EH task from being woken up. Eventually, when the deferred commands also time out, the SCSI EH task is woken up and the timeout processing occurs. Avoid this unnecessary additional SCSI EH wake up time with the same method as implemented in libata-scsi, using the eh_timed_out SCSI host template operation. The function sas_eh_timed_out() implements this operation and executes the function ata_scsi_retry_deferred_qc() for SATA devices. Co-developed-by: Igor Pylypiv Signed-off-by: Igor Pylypiv Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: John Garry Reviewed-by: Hannes Reinecke Tested-by: Igor Pylypiv Reviewed-by: Niklas Cassel Reviewed-by: Martin K. Petersen

scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race

2026-07-26T19:34:03+00:00

Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path. Fixes: fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") Signed-off-by: Xingui Yang Reviewed-by: John Garry Link: https://patch.msgid.link/20260716081145.3950172-1-yangxingui@huawei.com Signed-off-by: Martin K. Petersen

scsi: libsas: Delete unused to_dom_device() and to_dev_attr()

2026-04-09T01:55:51+00:00

These macros are unused and to_dev_attr() will conflict with an upcoming centralization of general attribute macros. Signed-off-by: Thomas Weißschuh Reviewed-by: John Garry Link: https://patch.msgid.link/20260408-libsas-cleanup-v1-1-826325bbc0ba@weissschuh.net Signed-off-by: Martin K. Petersen

scsi: Change the return type of the .queuecommand() callback

2026-01-24T02:32:34+00:00

In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning option has been introduced. This warning is enabled by default and can be used to catch .queuecommand() implementations that return another value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch that changes the return type of the .queuecommand() implementations from 'int' into 'enum scsi_qc_status'. No functionality has been changed. Cc: Damien Le Moal Cc: John Garry Signed-off-by: Bart Van Assche Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2025-10-04T02:17:48+00:00

Pull SCSI updates from James Bottomley: "Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus assorted cleanups and fixes. The only core update is to sd.c and is mostly cosmetic" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits) scsi: MAINTAINERS: Update FC element owners scsi: mpt3sas: Update driver version to 54.100.00.00 scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate scsi: ufs: dt-bindings: Document gear and rate limit properties scsi: ufs: core: Fix data race in CPU latency PM QoS request handling scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill() scsi: storvsc: Remove redundant ternary operators scsi: ufs: core: Change MCQ interrupt enable flow scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user() scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user() scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl() scsi: lpfc: Copyright updates for 14.4.0.11 patches scsi: lpfc: Update lpfc version to 14.4.0.11 scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int scsi: lpfc: Clean up extraneous phba dentries ...

scsi: libsas: Add dev_parent_is_expander() helper

2025-08-19T02:08:30+00:00

Many libsas drivers check if the parent of the device is an expander. Create a helper that the libsas drivers will use in follow up commits. Suggested-by: Damien Le Moal Signed-off-by: Niklas Cassel Link: https://lore.kernel.org/r/20250814173215.1765055-15-cassel@kernel.org Reviewed-by: Damien Le Moal Reviewed-by: John Garry Reviewed-by: Jason Yan Signed-off-by: Martin K. Petersen

scsi: switch ->bios_param() to passing gendisk

2025-08-13T06:59:28+00:00

Instances are passed struct block_device *bdev argument; the only thing it is used for (if it's used in the first place) is bdev->bd_disk. Might as well pass that in the first place... Reviewed-by: Martin K. Petersen Reviewed-by: Christoph Hellwig Acked-by: Jens Axboe Signed-off-by: Al Viro

scsi: Rename .device_configure() into .sdev_configure()

2024-12-04T20:34:28+00:00

Improve naming consistency with the .sdev_prep() and .sdev_destroy() methods by renaming .device_configure() into .sdev_configure(). Cc: Christoph Hellwig Acked-by: Damien Le Moal Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20241022180839.2712439-3-bvanassche@acm.org Signed-off-by: Martin K. Petersen

scsi: Rename .slave_alloc() and .slave_destroy()

2024-12-04T20:34:28+00:00

Rename .slave_alloc() into .sdev_init() and .slave_destroy() into .sdev_destroy(). The new names make it clear that these are actions on SCSI devices. Make this change in the SCSI core, SCSI drivers and also in the ATA drivers. No functionality has been changed. This patch has been created as follows: * Change the text "slave_alloc" into "sdev_init" in all source files except those in drivers/net/ and Documentation/. * Change the text "slave_destroy" into "sdev_destroy" in all source files except those in drivers/net/ and Documentation/. * Rename lpfc_no_slave() into lpfc_no_sdev(). * Manually adjust whitespace where necessary to restore vertical alignment (dc395x driver and include/linux/libata.h). Acked-by: Damien Le Moal Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen