kernel/git/stable/linux.git/net/bluetooth/iso.c, branch linux-6.16.y

Bluetooth: ISO: Fix getname not returning broadcast fields

2025-09-19T14:37:27+00:00

[ Upstream commit aee29c18a38d479c2f058c9b6a39b0527cf81d10 ] getname shall return iso_bc fields for both BIS_LINK and PA_LINK since the likes of bluetoothd do use the getpeername to retrieve the SID both when enumerating the broadcasters and when synchronizing. Fixes: a7bcffc673de ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections

2025-08-28T14:34:45+00:00

[ Upstream commit a7bcffc673de219af2698fbb90627016233de67b ] Currently, BIS_LINK is used for both BIG sync and PA sync connections, which makes it impossible to distinguish them when searching for a PA sync connection. Adding PA_LINK will make the distinction clearer and simplify future extensions for PA-related features. Signed-off-by: Yang Li Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 9d4b01a0bf8d ("Bluetooth: hci_core: Fix not accounting for BIS/CIS/PA links separately") Signed-off-by: Sasha Levin

Bluetooth: hci_core: Fix using {cis,bis}_capable for current settings

2025-08-28T14:34:45+00:00

[ Upstream commit 709788b154caf042874d765628ffa860f0bb0d1e ] {cis,bis}_capable only indicates the controller supports the feature since it doesn't check that LE is enabled so it shall not be used for current setting, instead this introduces {cis,bis}_enabled macros that can be used to indicate that these features are currently enabled. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Fixes: ae7533613133 ("Bluetooth: Check for ISO support in controller") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: ISO: Fix not using bc_sid as advertisement SID

2025-06-11T20:29:55+00:00

Currently bc_sid is being ignore when acting as Broadcast Source role, so this fix it by passing the bc_sid and then use it when programming the PA: < HCI Command: LE Set Exte.. (0x08|0x0036) plen 25 Handle: 0x01 Properties: 0x0000 Min advertising interval: 140.000 msec (0x00e0) Max advertising interval: 140.000 msec (0x00e0) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: Host has no preference (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 2M (0x02) SID: 0x01 Scan request notifications: Disabled (0x00) Signed-off-by: Luiz Augusto von Dentz

Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets

2025-06-11T20:29:39+00:00

BT_SK_PA_SYNC is only valid for Broadcast Sinks which means socket used for Broadcast Sources wouldn't be able to use the likes of getpeername to read out the sockaddr_iso_bc fields which may have been update (e.g. bc_sid). Fixes: 0a766a0affb5 ("Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: separate CIS_LINK and BIS_LINK link types

2025-05-21T14:29:28+00:00

Use separate link type id for unicast and broadcast ISO connections. These connection types are handled with separate HCI commands, socket API is different, and hci_conn has union fields that are different in the two cases, so they shall not be mixed up. Currently in most places it is attempted to distinguish ucast by bacmp(&c->dst, BDADDR_ANY) but it is wrong as dst is set for bcast sink hci_conn in iso_conn_ready(). Additionally checking sync_handle might be OK, but depends on details of bcast conn configuration flow. To avoid complicating it, use separate link types. Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz

Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields

2025-05-21T14:28:08+00:00

If the socket is a broadcast receiver fields from sockaddr_iso_bc shall be part of the values returned to getpeername since some of these fields are updated while doing the PA and BIG sync procedures. Signed-off-by: Luiz Augusto von Dentz

Bluetooth: ISO: Fix not using SID from adv report

2025-05-21T14:28:08+00:00

Up until now it has been assumed that the application would be able to enter the advertising SID in sockaddr_iso_bc.bc_sid, but userspace has no access to SID since the likes of MGMT_EV_DEVICE_FOUND cannot carry it, so it was left unset (0x00) which means it would be unable to synchronize if the broadcast source is using a different SID e.g. 0x04: > HCI Event: LE Meta Event (0x3e) plen 57 LE Extended Advertising Report (0x0d) Num reports: 1 Entry 0 Event type: 0x0000 Props: 0x0000 Data status: Complete Address type: Random (0x01) Address: 0B:82:E8:50:6D:C8 (Non-Resolvable) Primary PHY: LE 1M Secondary PHY: LE 2M SID: 0x04 TX power: 127 dBm RSSI: -55 dBm (0xc9) Periodic advertising interval: 180.00 msec (0x0090) Direct address type: Public (0x00) Direct address: 00:00:00:00:00:00 (OUI 00-00-00) Data length: 0x1f 06 16 52 18 5b 0b e1 05 16 56 18 04 00 11 30 4c ..R.[....V....0L 75 69 7a 27 73 20 53 32 33 20 55 6c 74 72 61 uiz's S23 Ultra Service Data: Broadcast Audio Announcement (0x1852) Broadcast ID: 14748507 (0xe10b5b) Service Data: Public Broadcast Announcement (0x1856) Data[2]: 0400 Unknown EIR field 0x30[16]: 4c75697a27732053323320556c747261 < HCI Command: LE Periodic Advertising Create Sync (0x08|0x0044) plen 14 Options: 0x0000 Use advertising SID, Advertiser Address Type and address Reporting initially enabled SID: 0x00 (<- Invalid) Adv address type: Random (0x01) Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable) Skip: 0x0000 Sync timeout: 20000 msec (0x07d0) Sync CTE type: 0x0000 So instead this changes now allow application to set HCI_SID_INVALID which will make hci_le_pa_create_sync to wait for a report, update the conn->sid using the report SID and only then issue PA create sync command: < HCI Command: LE Periodic Advertising Create Sync Options: 0x0000 Use advertising SID, Advertiser Address Type and address Reporting initially enabled SID: 0x04 Adv address type: Random (0x01) Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable) Skip: 0x0000 Sync timeout: 20000 msec (0x07d0) Sync CTE type: 0x0000 > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) Status: Success (0x00) Sync handle: 64 Advertising SID: 0x04 Advertiser address type: Random (0x01) Advertiser address: 0B:82:E8:50:6D:C8 (Non-Resolvable) Advertiser PHY: LE 2M (0x02) Periodic advertising interval: 180.00 msec (0x0090) Advertiser clock accuracy: 0x05 Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync

2025-04-25T19:03:19+00:00

BIG Create Sync requires the command to just generates a status so this makes use of __hci_cmd_sync_status_sk to wait for HCI_EVT_LE_BIG_SYNC_ESTABLISHED, also because of this chance it is not longer necessary to use a custom method to serialize the process of creating the BIG sync since the cmd_work_sync itself ensures only one command would be pending which now awaits for HCI_EVT_LE_BIG_SYNC_ESTABLISHED before proceeding to next connection. Fixes: 42ecf1947135 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: ISO: add TX timestamping

2025-03-25T16:50:07+00:00

Add BT_SCM_ERROR socket CMSG type. Support TX timestamping in ISO sockets. Support MSG_ERRQUEUE in ISO recvmsg. If a packet from sendmsg() is fragmented, only the first ACL fragment is timestamped. Signed-off-by: Pauli Virtanen Reviewed-by: Willem de Bruijn Signed-off-by: Luiz Augusto von Dentz