kernel/git/stable/linux.git/net/bluetooth, branch linux-5.19.y

Bluetooth: L2CAP: Fix user-after-free

2022-10-24T07:58:16+00:00

[ Upstream commit 35fcbc4243aad7e7d020b7c1dfb14bb888b20a4f ] This uses l2cap_chan_hold_unless_zero() after calling __l2cap_get_chan_blah() to prevent the following trace: Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref *kref) Bluetooth: chan 0000000023c4974d Bluetooth: parent 00000000ae861c08 ================================================================== BUG: KASAN: use-after-free in __mutex_waiter_is_first kernel/locking/mutex.c:191 [inline] BUG: KASAN: use-after-free in __mutex_lock_common kernel/locking/mutex.c:671 [inline] BUG: KASAN: use-after-free in __mutex_lock+0x278/0x400 kernel/locking/mutex.c:729 Read of size 8 at addr ffff888006a49b08 by task kworker/u3:2/389 Link: https://lore.kernel.org/lkml/20220622082716.478486-1-lee.jones@linaro.org Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sungwoo Kim Signed-off-by: Sasha Levin

Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times

2022-10-24T07:58:14+00:00

[ Upstream commit 448a496f760664d3e2e79466aa1787e6abc922b5 ] device_add shall not be called multiple times as stated in its documentation: 'Do not call this routine or device_register() more than once for any device structure' Syzkaller reports a bug as follows [1]: ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:33! invalid opcode: 0000 [#1] PREEMPT SMP KASAN [...] Call Trace: __list_add include/linux/list.h:69 [inline] list_add_tail include/linux/list.h:102 [inline] kobj_kset_join lib/kobject.c:164 [inline] kobject_add_internal+0x18f/0x8f0 lib/kobject.c:214 kobject_add_varg lib/kobject.c:358 [inline] kobject_add+0x150/0x1c0 lib/kobject.c:410 device_add+0x368/0x1e90 drivers/base/core.c:3452 hci_conn_add_sysfs+0x9b/0x1b0 net/bluetooth/hci_sysfs.c:53 hci_le_cis_estabilished_evt+0x57c/0xae0 net/bluetooth/hci_event.c:6799 hci_le_meta_evt+0x2b8/0x510 net/bluetooth/hci_event.c:7110 hci_event_func net/bluetooth/hci_event.c:7440 [inline] hci_event_packet+0x63d/0xfd0 net/bluetooth/hci_event.c:7495 hci_rx_work+0xae7/0x1230 net/bluetooth/hci_core.c:4007 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 Link: https://syzkaller.appspot.com/bug?id=da3246e2d33afdb92d66bc166a0934c5b146404a Signed-off-by: Luiz Augusto von Dentz Tested-by: Hawkins Jiawei Signed-off-by: Sasha Levin

Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()

2022-10-24T07:58:14+00:00

[ Upstream commit 2d2cb3066f2c90cd8ca540b36ba7a55e7f2406e0 ] syzbot is reporting cancel_delayed_work() without INIT_DELAYED_WORK() at l2cap_chan_del() [1], for CONF_NOT_COMPLETE flag (which meant to prevent l2cap_chan_del() from calling cancel_delayed_work()) is cleared by timer which fires before l2cap_chan_del() is called by closing file descriptor created by socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_L2CAP). l2cap_bredr_sig_cmd(L2CAP_CONF_REQ) and l2cap_bredr_sig_cmd(L2CAP_CONF_RSP) are calling l2cap_ertm_init(chan), and they call l2cap_chan_ready() (which clears CONF_NOT_COMPLETE flag) only when l2cap_ertm_init(chan) succeeded. l2cap_sock_init() does not call l2cap_ertm_init(chan), and it instead sets CONF_NOT_COMPLETE flag by calling l2cap_chan_set_defaults(). However, when connect() is requested, "command 0x0409 tx timeout" happens after 2 seconds from connect() request, and CONF_NOT_COMPLETE flag is cleared after 4 seconds from connect() request, for l2cap_conn_start() from l2cap_info_timeout() callback scheduled by schedule_delayed_work(&conn->info_timer, L2CAP_INFO_TIMEOUT); in l2cap_connect() is calling l2cap_chan_ready(). Fix this problem by initializing delayed works used by L2CAP_MODE_ERTM mode as soon as l2cap_chan_create() allocates a channel, like I did in commit be8597239379f0f5 ("Bluetooth: initialize skb_queue_head at l2cap_chan_create()"). Link: https://syzkaller.appspot.com/bug?extid=83672956c7aa6af698b3 [1] Reported-by: syzbot Signed-off-by: Tetsuo Handa Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_sync: Fix not indicating power state

2022-10-24T07:57:15+00:00

[ Upstream commit 6abf0dae8c3c927f54e62c46faf8aba580ba0d04 ] When setting power state using legacy/non-mgmt API (e.g hcitool hci0 up) the likes of mgmt_set_powered_complete won't be called causing clients of the MGMT API to not be notified of the change of the state. Fixes: cf75ad8b41d2 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED") Signed-off-by: Luiz Augusto von Dentz Tested-by: Tedd Ho-Jeong An Signed-off-by: Sasha Levin

Bluetooth: hci_core: Fix not handling link timeouts propertly

2022-10-24T07:57:13+00:00

[ Upstream commit 116523c8fac05d1d26f748fee7919a4ec5df67ea ] Change that introduced the use of __check_timeout did not account for link types properly, it always assumes ACL_LINK is used thus causing hdev->acl_last_tx to be used even in case of LE_LINK and then again uses ACL_LINK with hci_link_tx_to. To fix this __check_timeout now takes the link type as parameter and then procedure to use the right last_tx based on the link type and pass it to hci_link_tx_to. Fixes: 1b1d29e51499 ("Bluetooth: Make use of __check_timeout on hci_sched_le") Signed-off-by: Luiz Augusto von Dentz Tested-by: David Beinder Signed-off-by: Sasha Levin

Bluetooth: RFCOMM: Fix possible deadlock on socket shutdown/release

2022-10-24T07:57:11+00:00

[ Upstream commit 812e92b824c1db16c9519f8624d48a9901a0d38f ] Due to change to switch to use lock_sock inside rfcomm_sk_state_change the socket shutdown/release procedure can cause a deadlock: rfcomm_sock_shutdown(): lock_sock(); __rfcomm_sock_close(): rfcomm_dlc_close(): __rfcomm_dlc_close(): rfcomm_dlc_lock(); rfcomm_sk_state_change(): lock_sock(); To fix this when the call __rfcomm_sock_close is now done without holding the lock_sock since rfcomm_dlc_lock exists to protect the dlc data there is no need to use lock_sock in that code path. Link: https://lore.kernel.org/all/CAD+dNTsbuU4w+Y_P7o+VEN7BYCAbZuwZx2+tH+OTzCdcZF82YA@mail.gmail.com/ Fixes: b7ce436a5d79 ("Bluetooth: switch to lock_sock in RFCOMM") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works

2022-10-12T07:51:26+00:00

commit deee93d13d385103205879a8a0915036ecd83261 upstream. syzbot is reporting attempt to schedule hdev->cmd_work work from system_wq WQ into hdev->workqueue WQ which is under draining operation [1], for commit c8efcc2589464ac7 ("workqueue: allow chained queueing during destruction") does not allow such operation. The check introduced by commit 877afadad2dce8aa ("Bluetooth: When HCI work queue is drained, only queue chained work") was incomplete. Use hdev->workqueue WQ when queuing hdev->{cmd,ncmd}_timer works because hci_{cmd,ncmd}_timeout() calls queue_work(hdev->workqueue). Also, protect the queuing operation with RCU read lock in order to avoid calling queue_delayed_work() after cancel_delayed_work() completed. Link: https://syzkaller.appspot.com/bug?extid=243b7d89777f90f7613b [1] Reported-by: syzbot Signed-off-by: Tetsuo Handa Fixes: 877afadad2dce8aa ("Bluetooth: When HCI work queue is drained, only queue chained work") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: MGMT: Fix Get Device Flags

2022-09-20T10:43:47+00:00

[ Upstream commit 23b72814da1a094b4c065e0bb598249f310c5577 ] Get Device Flags don't check if device does actually use an RPA in which case it shall only set HCI_CONN_FLAG_REMOTE_WAKEUP if LL Privacy is enabled. Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_sync: hold hdev->lock when cleanup hci_conn

2022-09-08T09:23:59+00:00

[ Upstream commit 2da8eb834b775a9d1acea6214d3e4a78ac841e6e ] When disconnecting all devices, hci_conn_failed is used to cleanup hci_conn object when the hci_conn object cannot be aborted. The function hci_conn_failed requires the caller holds hdev->lock. Fixes: 9b3628d79b46f ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted") Signed-off-by: Zhengping Jiang Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_event: Fix checking conn for le_conn_complete_evt

2022-09-08T09:23:59+00:00

[ Upstream commit f48735a9aaf8258f39918e13adf464ccd7dce33b ] To prevent multiple conn complete events, we shouldn't look up the conn with hci_lookup_le_connect, since it requires the state to be BT_CONNECT. By the time the duplicate event is processed, the state might have changed, so we end up processing the new event anyway. Change the lookup function to hci_conn_hash_lookup_ba. Fixes: d5ebaa7c5f6f6 ("Bluetooth: hci_event: Ignore multiple conn complete events") Signed-off-by: Archie Pusaka Reviewed-by: Sonny Sasaka Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin