kernel/git/stable/linux.git/net/dsa, branch linux-5.16.y

net: dsa: fix panic on shutdown if multi-chip tree failed to probe

2022-04-08T12:06:20+00:00

[ Upstream commit 8fd36358ce82382519b50b05f437493e1e00c4a9 ] DSA probing is atypical because a tree of devices must probe all at once, so out of N switches which call dsa_tree_setup_routing_table() during probe, for (N - 1) of them, "complete" will return false and they will exit probing early. The Nth switch will set up the whole tree on their behalf. The implication is that for (N - 1) switches, the driver binds to the device successfully, without doing anything. When the driver is bound, the ->shutdown() method may run. But if the Nth switch has failed to initialize the tree, there is nothing to do for the (N - 1) driver instances, since the slave devices have not been created, etc. Moreover, dsa_switch_shutdown() expects that the calling @ds has been in fact initialized, so it jumps at dereferencing the various data structures, which is incorrect. Avoid the ensuing NULL pointer dereferences by simply checking whether the Nth switch has previously set "ds->setup = true" for the switch which is currently shutting down. The entire setup is serialized under dsa2_mutex which we already hold. Fixes: 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown") Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20220318195443.275026-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: Add missing of_node_put() in dsa_port_parse_of

2022-03-23T08:18:49+00:00

[ Upstream commit cb0b430b4e3acc88c85e0ad2e25f2a25a5765262 ] The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: 6d4e5c570c2d ("net: dsa: get port type at parse time") Signed-off-by: Miaoqian Lin Link: https://lore.kernel.org/r/20220316082602.10785-1-linmq006@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: avoid call to __dev_set_promiscuity() while rtnl_mutex isn't held

2022-03-02T10:51:05+00:00

commit 8940e6b669ca1196ce0a0549c819078096390f76 upstream. If the DSA master doesn't support IFF_UNICAST_FLT, then the following call path is possible: dsa_slave_switchdev_event_work -> dsa_port_host_fdb_add -> dev_uc_add -> __dev_set_rx_mode -> __dev_set_promiscuity Since the blamed commit, dsa_slave_switchdev_event_work() no longer holds rtnl_lock(), which triggers the ASSERT_RTNL() from __dev_set_promiscuity(). Taking rtnl_lock() around dev_uc_add() is impossible, because all the code paths that call dsa_flush_workqueue() do so from contexts where the rtnl_mutex is already held - so this would lead to an instant deadlock. dev_uc_add() in itself doesn't require the rtnl_mutex for protection. There is this comment in __dev_set_rx_mode() which assumes so: /* Unicast addresses changes may only happen under the rtnl, * therefore calling __dev_set_promiscuity here is safe. */ but it is from commit 4417da668c00 ("[NET]: dev: secondary unicast address support") dated June 2007, and in the meantime, commit f1f28aa3510d ("netdev: Add addr_list_lock to struct net_device."), dated July 2008, has added &dev->addr_list_lock to protect this instead of the global rtnl_mutex. Nonetheless, __dev_set_promiscuity() does assume rtnl_mutex protection, but it is the uncommon path of what we typically expect dev_uc_add() to do. So since only the uncommon path requires rtnl_lock(), just check ahead of time whether dev_uc_add() would result into a call to __dev_set_promiscuity(), and handle that condition separately. DSA already configures the master interface to be promiscuous if the tagger requires this. We can extend this to also cover the case where the master doesn't handle dev_uc_add() (doesn't support IFF_UNICAST_FLT), and on the premise that we'd end up making it promiscuous during operation anyway, either if a DSA slave has a non-inherited MAC address, or if the bridge notifies local FDB entries for its own MAC address, the address of a station learned on a foreign port, etc. Fixes: 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Reported-by: Oleksij Rempel Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: lan9303: handle hwaccel VLAN tags

2022-02-23T11:05:56+00:00

commit 017b355bbdc6620fd8fe05fe297f553ce9d855ee upstream. Check for a hwaccel VLAN tag on rx and use it if present. Otherwise, use __skb_vlan_pop() like the other tag parsers do. This fixes the case where the VLAN tag has already been consumed by the master. Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20220216124634.23123-1-mans@mansr.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN

2022-02-23T11:05:56+00:00

commit a2614140dc0f467a83aa3bb4b6ee2d6480a76202 upstream. mv88e6xxx is special among DSA drivers in that it requires the VTU to contain the VID of the FDB entry it modifies in mv88e6xxx_port_db_load_purge(), otherwise it will return -EOPNOTSUPP. Sometimes due to races this is not always satisfied even if external code does everything right (first deletes the FDB entries, then the VLAN), because DSA commits to hardware FDB entries asynchronously since commit c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification"). Therefore, the mv88e6xxx driver must close this race condition by itself, by asking DSA to flush the switchdev workqueue of any FDB deletions in progress, prior to exiting a VLAN. Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification") Reported-by: Rafael Richter Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: fix panic when DSA master device unbinds on shutdown

2022-02-16T11:58:39+00:00

[ Upstream commit ee534378f00561207656663d93907583958339ae ] Rafael reports that on a system with LX2160A and Marvell DSA switches, if a reboot occurs while the DSA master (dpaa2-eth) is up, the following panic can be seen: systemd-shutdown[1]: Rebooting. Unable to handle kernel paging request at virtual address 00a0000800000041 [00a0000800000041] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00042-g8f5585009b24 #32 pc : dsa_slave_netdevice_event+0x130/0x3e4 lr : raw_notifier_call_chain+0x50/0x6c Call trace: dsa_slave_netdevice_event+0x130/0x3e4 raw_notifier_call_chain+0x50/0x6c call_netdevice_notifiers_info+0x54/0xa0 __dev_close_many+0x50/0x130 dev_close_many+0x84/0x120 unregister_netdevice_many+0x130/0x710 unregister_netdevice_queue+0x8c/0xd0 unregister_netdev+0x20/0x30 dpaa2_eth_remove+0x68/0x190 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x94/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_device_remove+0x24/0x40 __fsl_mc_device_remove+0xc/0x20 device_for_each_child+0x58/0xa0 dprc_remove+0x90/0xb0 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_bus_remove+0x80/0x100 fsl_mc_bus_shutdown+0xc/0x1c platform_shutdown+0x20/0x30 device_shutdown+0x154/0x330 __do_sys_reboot+0x1cc/0x250 __arm64_sys_reboot+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x4c/0x150 el0_svc+0x24/0xb0 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x178/0x17c It can be seen from the stack trace that the problem is that the deregistration of the master causes a dev_close(), which gets notified as NETDEV_GOING_DOWN to dsa_slave_netdevice_event(). But dsa_switch_shutdown() has already run, and this has unregistered the DSA slave interfaces, and yet, the NETDEV_GOING_DOWN handler attempts to call dev_close_many() on those slave interfaces, leading to the problem. The previous attempt to avoid the NETDEV_GOING_DOWN on the master after dsa_switch_shutdown() was called seems improper. Unregistering the slave interfaces is unnecessary and unhelpful. Instead, after the slaves have stopped being uppers of the DSA master, we can now reset to NULL the master->dsa_ptr pointer, which will make DSA start ignoring all future notifier events on the master. Fixes: 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown") Reported-by: Rafael Richter Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: fix incorrect function pointer check for MRP ring roles

2022-01-27T11:01:54+00:00

[ Upstream commit ff91e1b68490b97c18c649b769618815eb945f11 ] The cross-chip notifier boilerplate code meant to check the presence of ds->ops->port_mrp_add_ring_role before calling it, but checked ds->ops->port_mrp_add instead, before calling ds->ops->port_mrp_add_ring_role. Therefore, a driver which implements one operation but not the other would trigger a NULL pointer dereference. There isn't any such driver in DSA yet, so there is no reason to backport the change. Issue found through code inspection. Cc: Horatiu Vultur Fixes: c595c4330da0 ("net: dsa: add MRP support") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: tag_ocelot: use traffic class to map priority on injected header

2021-12-23T17:44:59+00:00

For Ocelot switches, the CPU injected frames have an injection header where it can specify the QoS class of the packet and the DSA tag, now it uses the SKB priority to set that. If a traffic class to priority mapping is configured on the netdevice (with mqprio for example ...), it won't be considered for CPU injected headers. This patch make the QoS class aligned to the priority to traffic class mapping if it exists. Fixes: 8dce89aa5f32 ("net: dsa: ocelot: add tagger for Ocelot/Felix switches") Signed-off-by: Xiaoliang Yang Signed-off-by: Marouen Ghodhbane Link: https://lore.kernel.org/r/20211223072211.33130-1-xiaoliang.yang_1@nxp.com Signed-off-by: Jakub Kicinski

net: dsa: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge

2021-11-03T14:22:00+00:00

Normally it is expected that the dsa_device_ops :: rcv() method finishes parsing the DSA tag and consumes it, then never looks at it again. But commit c0bcf537667c ("net: dsa: ocelot: add hardware timestamping support for Felix") added support for RX timestamping in a very unconventional way. On this switch, a partial timestamp is available in the DSA header, but the driver got away with not parsing that timestamp right away, but instead delayed that parsing for a little longer: dsa_switch_rcv(): nskb = cpu_dp->rcv(skb, dev); <------------- not here -> ocelot_rcv() ... skb = nskb; skb_push(skb, ETH_HLEN); skb->pkt_type = PACKET_HOST; skb->protocol = eth_type_trans(skb, skb->dev); ... if (dsa_skb_defer_rx_timestamp(p, skb)) <--- but here -> felix_rxtstamp() return 0; When in felix_rxtstamp(), this driver accounted for the fact that eth_type_trans() happened in the meanwhile, so it got a hold of the extraction header again by subtracting (ETH_HLEN + OCELOT_TAG_LEN) bytes from the current skb->data. This worked for quite some time but was quite fragile from the very beginning. Not to mention that having DSA tag parsing split in two different files, under different folders (net/dsa/tag_ocelot.c vs drivers/net/dsa/ocelot/felix.c) made it quite non-obvious for patches to come that they might break this. Finally, the blamed commit does the following: at the end of ocelot_rcv(), it checks whether the skb payload contains a VLAN header. If it does, and this port is under a VLAN-aware bridge, that VLAN ID might not be correct in the sense that the packet might have suffered VLAN rewriting due to TCAM rules (VCAP IS1). So we consume the VLAN ID from the skb payload using __skb_vlan_pop(), and take the classified VLAN ID from the DSA tag, and construct a hwaccel VLAN tag with the classified VLAN, and the skb payload is VLAN-untagged. The big problem is that __skb_vlan_pop() does: memmove(skb->data + VLAN_HLEN, skb->data, 2 * ETH_ALEN); __skb_pull(skb, VLAN_HLEN); aka it moves the Ethernet header 4 bytes to the right, and pulls 4 bytes from the skb headroom (effectively also moving skb->data, by definition). So for felix_rxtstamp()'s fragile logic, all bets are off now. Instead of having the "extraction" pointer point to the DSA header, it actually points to 4 bytes _inside_ the extraction header. Corollary, the last 4 bytes of the "extraction" header are in fact 4 stale bytes of the destination MAC address from the Ethernet header, from prior to the __skb_vlan_pop() movement. So of course, RX timestamps are completely bogus when the system is configured in this way. The fix is actually very simple: just don't structure the code like that. For better or worse, the DSA PTP timestamping API does not offer a straightforward way for drivers to present their RX timestamps, but other drivers (sja1105) have established a simple mechanism to carry their RX timestamp from dsa_device_ops :: rcv() all the way to dsa_switch_ops :: port_rxtstamp() and even later. That mechanism is to simply save the partial timestamp to the skb->cb, and complete it later. Question: why don't we simply populate the skb's struct skb_shared_hwtstamps from ocelot_rcv(), and bother with this complication of propagating the timestamp to felix_rxtstamp()? Answer: dsa_switch_ops :: port_rxtstamp() answers the question whether PTP packets need sleepable context to retrieve the full RX timestamp. Currently felix_rxtstamp() answers "no, thanks" to that question, and calls ocelot_ptp_gettime64() from softirq atomic context. This is understandable, since Felix VSC9959 is a PCIe memory-mapped switch, so hardware access does not require sleeping. But the felix driver is preparing for the introduction of other switches where hardware access is over a slow bus like SPI or MDIO: https://lore.kernel.org/lkml/20210814025003.2449143-1-colin.foster@in-advantage.com/ So I would like to keep this code structure, so the rework needed when that driver will need PTP support will be minimal (answer "yes, I need deferred context for this skb's RX timestamp", then the partial timestamp will still be found in the skb->cb. Fixes: ea440cd2d9b2 ("net: dsa: tag_ocelot: use VLAN information from tagging header when available") Reported-by: Po Liu Cc: Yangbo Lu Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: populate supported_interfaces member

2021-11-01T13:06:32+00:00

Add a new DSA switch operation, phylink_get_interfaces, which should fill in which PHY_INTERFACE_MODE_* are supported by given port. Use this before phylink_create() to fill phylinks supported_interfaces member, allowing phylink to determine which PHY_INTERFACE_MODEs are supported. Signed-off-by: Marek Behún [tweaked patch and description to add more complete support -- rmk] Signed-off-by: Russell King Signed-off-by: Russell King (Oracle) Signed-off-by: David S. Miller