kernel/git/stable/linux.git/net/ipv4/ping.c, branch linux-5.18.y

ipv4: ping: fix bind address validity check

2022-06-29T07:04:25+00:00

commit b4a028c4d031c27704ad73b1195ca69a1206941e upstream. Commit 8ff978b8b222 ("ipv4/raw: support binding to nonlocal addresses") introduced a helper function to fold duplicated validity checks of bind addresses into inet_addr_valid_or_nonlocal(). However, this caused an unintended regression in ping_check_bind_addr(), which previously would reject binding to multicast and broadcast addresses, but now these are both incorrectly allowed as reported in [1]. This patch restores the original check. A simple reordering is done to improve readability and make it evident that multicast and broadcast addresses should not be allowed. Also, add an early exit for INADDR_ANY which replaces lost behavior added by commit 0ce779a9f501 ("net: Avoid unnecessary inet_addr_type() call when addr is INADDR_ANY"). Furthermore, this patch introduces regression selftests to catch these specific cases. [1] https://lore.kernel.org/netdev/CANP3RGdkAcDyAZoT1h8Gtuu0saq+eOrrTiWbxnOs+5zn+cpyKg@mail.gmail.com/ Fixes: 8ff978b8b222 ("ipv4/raw: support binding to nonlocal addresses") Cc: Miaohe Lin Reported-by: Maciej Żenczykowski Signed-off-by: Carlos Llamas Signed-off-by: Riccardo Paolo Bestetti Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: remove noblock parameter from skb_recv_datagram()

2022-06-22T12:28:02+00:00

[ Upstream commit f4b41f062c424209e3939a81e6da022e049a45f2 ] skb_recv_datagram() has two parameters 'flags' and 'noblock' that are merged inside skb_recv_datagram() by 'flags | (noblock ? MSG_DONTWAIT : 0)' As 'flags' may contain MSG_DONTWAIT as value most callers split the 'flags' into 'flags' and 'noblock' with finally obsolete bit operations like this: skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &rc); And this is not even done consistently with the 'flags' parameter. This patch removes the obsolete and costly splitting into two parameters and only performs bit operations when really needed on the caller side. One missing conversion thankfully reported by kernel test robot. I missed to enable kunit tests to build the mctp code. Reported-by: kernel test robot Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ping: fix address binding wrt vrf

2022-05-06T01:12:44+00:00

When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket, instead of an IP raw socket. In this case, 'ping' is unable to bind its socket to a local address owned by a vrflite. Before the patch: $ sysctl -w net.ipv4.ping_group_range='0 2147483647' $ ip link add blue type vrf table 10 $ ip link add foo type dummy $ ip link set foo master blue $ ip link set foo up $ ip addr add 192.168.1.1/24 dev foo $ ip addr add 2001::1/64 dev foo $ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2 ping: bind: Cannot assign requested address $ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2 ping6: bind icmp socket: Cannot assign requested address CC: stable@vger.kernel.org Fixes: 1b69c6d0ae90 ("net: Introduce L3 Master device abstraction") Signed-off-by: Nicolas Dichtel Reviewed-by: David Ahern Signed-off-by: Jakub Kicinski

ping: remove pr_err from ping_lookup

2022-02-24T17:18:29+00:00

As Jakub noticed, prints should be avoided on the datapath. Also, as packets would never come to the else branch in ping_lookup(), remove pr_err() from ping_lookup(). Fixes: 35a79e64de29 ("ping: fix the dif and sdif check in ping_lookup") Reported-by: Jakub Kicinski Signed-off-by: Xin Long Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski

ping: fix the dif and sdif check in ping_lookup

2022-02-17T15:01:20+00:00

When 'ping' changes to use PING socket instead of RAW socket by: # sysctl -w net.ipv4.ping_group_range="0 100" There is another regression caused when matching sk_bound_dev_if and dif, RAW socket is using inet_iif() while PING socket lookup is using skb->dev->ifindex, the cmd below fails due to this: # ip link add dummy0 type dummy # ip link set dummy0 up # ip addr add 192.168.111.1/24 dev dummy0 # ping -I dummy0 192.168.111.1 -c1 The issue was also reported on: https://github.com/iputils/iputils/issues/104 But fixed in iputils in a wrong way by not binding to device when destination IP is on device, and it will cause some of kselftests to fail, as Jianlin noticed. This patch is to use inet(6)_iif and inet(6)_sdif to get dif and sdif for PING socket, and keep consistent with RAW socket. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by: Jianlin Shi Signed-off-by: Xin Long Signed-off-by: David S. Miller

ping: fix the sk_bound_dev_if match in ping_lookup

2022-01-24T12:30:12+00:00

When 'ping' changes to use PING socket instead of RAW socket by: # sysctl -w net.ipv4.ping_group_range="0 100" the selftests 'router_broadcast.sh' will fail, as such command # ip vrf exec vrf-h1 ping -I veth0 198.51.100.255 -b can't receive the response skb by the PING socket. It's caused by mismatch of sk_bound_dev_if and dif in ping_rcv() when looking up the PING socket, as dif is vrf-h1 if dif's master was set to vrf-h1. This patch is to fix this regression by also checking the sk_bound_dev_if against sdif so that the packets can stil be received even if the socket is not bound to the vrf device but to the real iif. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by: Hangbin Liu Signed-off-by: Xin Long Signed-off-by: David S. Miller

net: bpf: Handle return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND()

2022-01-07T01:08:35+00:00

The return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() in __inet_bind() is not handled properly. While the return value is non-zero, it will set inet_saddr and inet_rcv_saddr to 0 and exit: err = BPF_CGROUP_RUN_PROG_INET4_POST_BIND(sk); if (err) { inet->inet_saddr = inet->inet_rcv_saddr = 0; goto out_release_sock; } Let's take UDP for example and see what will happen. For UDP socket, it will be added to 'udp_prot.h.udp_table->hash' and 'udp_prot.h.udp_table->hash2' after the sk->sk_prot->get_port() called success. If 'inet->inet_rcv_saddr' is specified here, then 'sk' will be in the 'hslot2' of 'hash2' that it don't belong to (because inet_saddr is changed to 0), and UDP packet received will not be passed to this sock. If 'inet->inet_rcv_saddr' is not specified here, the sock will work fine, as it can receive packet properly, which is wired, as the 'bind()' is already failed. To undo the get_port() operation, introduce the 'put_port' field for 'struct proto'. For TCP proto, it is inet_put_port(); For UDP proto, it is udp_lib_unhash(); For icmp proto, it is ping_unhash(). Therefore, after sys_bind() fail caused by BPF_CGROUP_RUN_PROG_INET4_POST_BIND(), it will be unbinded, which means that it can try to be binded to another port. Signed-off-by: Menglong Dong Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220106132022.3470772-2-imagedong@tencent.com

ipv4/raw: support binding to nonlocal addresses

2021-11-18T04:21:52+00:00

Add support to inet v4 raw sockets for binding to nonlocal addresses through the IP_FREEBIND and IP_TRANSPARENT socket options, as well as the ipv4.ip_nonlocal_bind kernel parameter. Add helper function to inet_sock.h to check for bind address validity on the base of the address type and whether nonlocal address are enabled for the socket via any of the sockopts/sysctl, deduplicating checks in ipv4/ping.c, ipv4/af_inet.c, ipv6/af_inet6.c (for mapped v4->v6 addresses), and ipv4/raw.c. Add test cases with IP[V6]_FREEBIND verifying that both v4 and v6 raw sockets support binding to nonlocal addresses after the change. Add necessary support for the test cases to nettest. Signed-off-by: Riccardo Paolo Bestetti Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20211117090010.125393-1-pbl@bestov.io Signed-off-by: Jakub Kicinski

net: sock: introduce sk_error_report

2021-06-29T18:28:21+00:00

This patch introduces a function wrapper to call the sk_error_report callback. That will prepare to add additional handling whenever sk_error_report is called, for example to trace socket errors. Signed-off-by: Alexander Aring Signed-off-by: David S. Miller

ping: Check return value of function 'ping_queue_rcv_skb'

2021-06-10T20:44:55+00:00

Function 'ping_queue_rcv_skb' not always return success, which will also return fail. If not check the wrong return value of it, lead to function `ping_rcv` return success. Signed-off-by: Zheng Yongjun Signed-off-by: David S. Miller