kernel/git/stable/linux.git/net/ipv6/sit.c, branch linux-3.16.y

sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()

2019-05-02T20:41:49+00:00

commit 173656accaf583698bac3f9e269884ba60d51ef4 upstream. If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This: ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up ip addr add 198.51.100.1/24 dev sit1 ping 198.51.100.2 if IPv6 is disabled at boot time, will crash the kernel. v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead, as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()). Reported-by: Jianlin Shi Fixes: ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error") Cc: Oussama Ghorbel Signed-off-by: Hangbin Liu Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings

ipv6: sit: better validate user provided tunnel names

2018-10-21T07:45:15+00:00

commit b95211e066fc3494b7c115060b2297b4ba21f025 upstream. Use dev_valid_name() to make sure user does not provide illegal device name. syzbot caught the following bug : BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254 Write of size 33 at addr ffff8801b64076d8 by task syzkaller932654/4453 CPU: 0 PID: 4453 Comm: syzkaller932654 Not tainted 4.16.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x1b9/0x29f lib/dump_stack.c:53 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254 ipip6_tunnel_ioctl+0xe71/0x241b net/ipv6/sit.c:1221 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525 sock_ioctl+0x47e/0x680 net/socket.c:1015 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 SYSC_ioctl fs/ioctl.c:708 [inline] SyS_ioctl+0x24/0x30 fs/ioctl.c:706 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings

sit: fix a double free on error path

2017-03-16T02:27:25+00:00

[ Upstream commit d7426c69a1942b2b9b709bf66b944ff09f561484 ] Dmitry reported a double free in sit_init_net(): kernel BUG at mm/percpu.c:689! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 15692 Comm: syz-executor1 Not tainted 4.10.0-rc6-next-20170206 #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801c9cc27c0 task.stack: ffff88017d1d8000 RIP: 0010:pcpu_free_area+0x68b/0x810 mm/percpu.c:689 RSP: 0018:ffff88017d1df488 EFLAGS: 00010046 RAX: 0000000000010000 RBX: 00000000000007c0 RCX: ffffc90002829000 RDX: 0000000000010000 RSI: ffffffff81940efb RDI: ffff8801db841d94 RBP: ffff88017d1df590 R08: dffffc0000000000 R09: 1ffffffff0bb3bdd R10: dffffc0000000000 R11: 00000000000135dd R12: ffff8801db841d80 R13: 0000000000038e40 R14: 00000000000007c0 R15: 00000000000007c0 FS: 00007f6ea608f700(0000) GS:ffff8801dbe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000aff8 CR3: 00000001c8d44000 CR4: 00000000001426f0 DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: free_percpu+0x212/0x520 mm/percpu.c:1264 ipip6_dev_free+0x43/0x60 net/ipv6/sit.c:1335 sit_init_net+0x3cb/0xa10 net/ipv6/sit.c:1831 ops_init+0x10a/0x530 net/core/net_namespace.c:115 setup_net+0x2ed/0x690 net/core/net_namespace.c:291 copy_net_ns+0x26c/0x530 net/core/net_namespace.c:396 create_new_namespaces+0x409/0x860 kernel/nsproxy.c:106 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205 SYSC_unshare kernel/fork.c:2281 [inline] SyS_unshare+0x64e/0xfc0 kernel/fork.c:2231 entry_SYSCALL_64_fastpath+0x1f/0xc2 This is because when tunnel->dst_cache init fails, we free dev->tstats once in ipip6_tunnel_init() and twice in sit_init_net(). This looks redundant but its ndo_uinit() does not seem enough to clean up everything here. So avoid this by setting dev->tstats to NULL after the first free, at least for -net. Reported-by: Dmitry Vyukov Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

sit: correct IP protocol used in ipip6_err

2017-03-16T02:27:17+00:00

[ Upstream commit d5d8760b78d0cfafe292f965f599988138b06a70 ] Since 32b8a8e59c9c ("sit: add IPv4 over IPv4 support") ipip6_err() may be called for packets whose IP protocol is IPPROTO_IPIP as well as those whose IP protocol is IPPROTO_IPV6. In the case of IPPROTO_IPIP packets the correct protocol value is not passed to ipv4_update_pmtu() or ipv4_redirect(). This patch resolves this problem by using the IP protocol of the packet rather than a hard-coded value. This appears to be consistent with the usage of the protocol of a packet by icmp_socket_deliver() the caller of ipip6_err(). I was able to exercise the redirect case by using a setup where an ICMP redirect was received for the destination of the encapsulated packet. However, it appears that although incorrect the protocol field is not used in this case and thus no problem manifests. On inspection it does not appear that a problem will manifest in the fragmentation needed/update pmtu case either. In short I believe this is a cosmetic fix. None the less, the use of IPPROTO_IPV6 seems wrong and confusing. Reviewed-by: Dinan Gunawardena Signed-off-by: Simon Horman Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

sit: fix sit0 percpu double allocations

2015-12-09T11:40:54+00:00

commit 4ece9009774596ee3df0acba65a324b7ea79387c upstream. sit0 device allocates its percpu storage twice : - One time in ipip6_tunnel_init() - One time in ipip6_fb_tunnel_init() Thus we leak 48 bytes per possible cpu per network namespace dismantle. ipip6_fb_tunnel_init() can be much simpler and does not return an error, and should be called after register_netdev() Note that ipip6_tunnel_clone_6rd() also needs to be called after register_netdev() (calling ipip6_tunnel_init()) Fixes: ebe084aafb7e ("sit: Use ipip6_tunnel_init as the ndo_init function.") Signed-off-by: Eric Dumazet Reported-by: Dmitry Vyukov Cc: Steffen Klassert Signed-off-by: David S. Miller Signed-off-by: Luis Henriques

sit: Use ipip6_tunnel_init as the ndo_init function.

2014-11-27T11:21:53+00:00

commit ebe084aafb7e93adf210e80043c9f69adf56820d upstream. ipip6_tunnel_init() sets the dev->iflink via a call to ipip6_tunnel_bind_dev(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ipip6_tunnel_init() as the ndo_init function. Then ipip6_tunnel_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller Signed-off-by: Luis Henriques

sit: Fix ipip6_tunnel_lookup device matching criteria

2014-10-15T10:05:27+00:00

[ Upstream commit bc8fc7b8f825ef17a0fb9e68c18ce94fa66ab337 ] As of 4fddbf5d78 ("sit: strictly restrict incoming traffic to tunnel link device"), when looking up a tunnel, tunnel's underlying interface (t->parms.link) is verified to match incoming traffic's ingress device. However the comparison was incorrectly based on skb->dev->iflink. Instead, dev->ifindex should be used, which correctly represents the interface from which the IP stack hands the ipip6 packets. This allows setting up sit tunnels bound to vlan interfaces (otherwise incoming ipip6 traffic on the vlan interface was dropped due to ipip6_tunnel_lookup match failure). Signed-off-by: Shmulik Ladkani Acked-by: Nicolas Dichtel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-06-11T23:02:55+00:00

Conflicts: net/core/rtnetlink.c net/core/skbuff.c Both conflicts were very simple overlapping changes. Signed-off-by: David S. Miller

ipip, sit: fix ipv4_{update_pmtu,redirect} calls

2014-06-11T06:35:52+00:00

ipv4_{update_pmtu,redirect} were called with tunnel's ifindex (t->dev is a tunnel netdevice). It caused wrong route lookup and failure of pmtu update or redirect. We should use the same ifindex that we use in ip_route_output_* in *tunnel_xmit code. It is t->parms.link . Signed-off-by: Dmitry Popov Signed-off-by: David S. Miller

net: tunnels - enable module autoloading

2014-05-21T19:46:52+00:00

Enable the module alias hookup to allow tunnel modules to be autoloaded on demand. This is in line with how most other netdev kinds work, and will allow userspace to create tunnels without having CAP_SYS_MODULE. Signed-off-by: Tom Gundersen Signed-off-by: David S. Miller