kernel/git/stable/linux.git/net/ipv6, branch linux-5.19.y

netfilter: nft_fib: Fix for rpath check with VRF devices

2022-10-24T07:57:14+00:00

[ Upstream commit 2a8a7c0eaa8747c16aa4a48d573aa920d5c00a5c ] Analogous to commit b575b24b8eee3 ("netfilter: Fix rpfilter dropping vrf packets by mistake") but for nftables fib expression: Add special treatment of VRF devices so that typical reverse path filtering via 'fib saddr . iif oif' expression works as expected. Fixes: f6d0cbcf09c50 ("netfilter: nf_tables: add fib expression") Signed-off-by: Phil Sutter Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin

esp: choose the correct inner protocol for GSO on inter address family tunnels

2022-10-24T07:57:06+00:00

[ Upstream commit 26dbd66eab8080be51759e48280da04015221e22 ] Commit 23c7f8d7989e ("net: Fix esp GSO on inter address family tunnels.") is incomplete. It passes to skb_eth_gso_segment the protocol for the outer IP version, instead of the inner IP version, so we end up calling inet_gso_segment on an inner IPv6 packet and ipv6_gso_segment on an inner IPv4 packet and the packets are dropped. This patch completes the fix by selecting the correct protocol based on the inner mode's family. Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2") Signed-off-by: Sabrina Dubroca Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

ipv6: Fix crash when IPv6 is administratively disabled

2022-09-28T09:32:17+00:00

[ Upstream commit 76dd07281338da6951fdab3432ced843fa87839c ] The global 'raw_v6_hashinfo' variable can be accessed even when IPv6 is administratively disabled via the 'ipv6.disable=1' kernel command line option, leading to a crash [1]. Fix by restoring the original behavior and always initializing the variable, regardless of IPv6 support being administratively disabled or not. [1] BUG: unable to handle page fault for address: ffffffffffffffc8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 173e18067 P4D 173e18067 PUD 173e1a067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 271 Comm: ss Not tainted 6.0.0-rc4-custom-00136-g0727a9a5fbc1 #1396 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:raw_diag_dump+0x310/0x7f0 [...] Call Trace: __inet_diag_dump+0x10f/0x2e0 netlink_dump+0x575/0xfd0 __netlink_dump_start+0x67b/0x940 inet_diag_handler_cmd+0x273/0x2d0 sock_diag_rcv_msg+0x317/0x440 netlink_rcv_skb+0x15e/0x430 sock_diag_rcv+0x2b/0x40 netlink_unicast+0x53b/0x800 netlink_sendmsg+0x945/0xe60 ____sys_sendmsg+0x747/0x960 ___sys_sendmsg+0x13a/0x1e0 __sys_sendmsg+0x118/0x1e0 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: 0daf07e52709 ("raw: convert raw sockets to RCU") Reported-by: Roberto Ricci Tested-by: Roberto Ricci Signed-off-by: Ido Schimmel Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20220916084821.229287-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: Find dst with sk's xfrm policy not ctl_sk

2022-09-23T12:14:06+00:00

commit e22aa14866684f77b4f6b6cae98539e520ddb731 upstream. If we set XFRM security policy by calling setsockopt with option IPV6_XFRM_POLICY, the policy will be stored in 'sock_policy' in 'sock' struct. However tcp_v6_send_response doesn't look up dst_entry with the actual socket but looks up with tcp control socket. This may cause a problem that a RST packet is sent without ESP encryption & peer's TCP socket can't receive it. This patch will make the function look up dest_entry with actual socket, if the socket has XFRM policy(sock_policy), so that the TCP response packet via this function can be encrypted, & aligned on the encrypted TCP socket. Tested: We encountered this problem when a TCP socket which is encrypted in ESP transport mode encryption, receives challenge ACK at SYN_SENT state. After receiving challenge ACK, TCP needs to send RST to establish the socket at next SYN try. But the RST was not encrypted & peer TCP socket still remains on ESTABLISHED state. So we verified this with test step as below. [Test step] 1. Making a TCP state mismatch between client(IDLE) & server(ESTABLISHED). 2. Client tries a new connection on the same TCP ports(src & dst). 3. Server will return challenge ACK instead of SYN,ACK. 4. Client will send RST to server to clear the SOCKET. 5. Client will retransmit SYN to server on the same TCP ports. [Expected result] The TCP connection should be established. Cc: Maciej Żenczykowski Cc: Eric Dumazet Cc: Steffen Klassert Cc: Sehee Lee Signed-off-by: Sewook Seo Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv6: sr: fix out-of-bounds read when setting HMAC data.

2022-09-15T08:47:16+00:00

[ Upstream commit 84a53580c5d2138c7361c7c3eea5b31827e63b35 ] The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=, info=) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=, info=) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 , family=, family=) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 ) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 ) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=, msg=0xffffc90000ba7e48, len=) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. Reported-by: Lucas Leong Tested: verified that EINVAL is correctly returned when secretlen > len(secret) Fixes: 4f4853dc1c9c1 ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by: David Lebrun Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bonding: add all node mcast address when slave up

2022-09-15T08:47:16+00:00

[ Upstream commit fd16eb948ea8b28afb03e11a5b11841e6ac2aa2b ] When a link is enslave to bond, it need to set the interface down first. This makes the slave remove mac multicast address 33:33:00:00:00:01(The IPv6 multicast address ff02::1 is kept even when the interface down). When bond set the slave up, ipv6_mc_up() was not called due to commit c2edacf80e15 ("bonding / ipv6: no addrconf for slaves separately from master"). This is not an issue before we adding the lladdr target feature for bonding, as the mac multicast address will be added back when bond interface up and join group ff02::1. But after adding lladdr target feature for bonding. When user set a lladdr target, the unsolicited NA message with all-nodes multicast dest will be dropped as the slave interface never add 33:33:00:00:00:01 back. Fix this by calling ipv6_mc_up() to add 33:33:00:00:00:01 back when the slave interface up. Reported-by: LiLiang Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

rxrpc: Fix ICMP/ICMP6 error handling

2022-09-15T08:47:15+00:00

[ Upstream commit ac56a0b48da86fd1b4389632fb7c4c8a5d86eefa ] Because rxrpc pretends to be a tunnel on top of a UDP/UDP6 socket, allowing it to siphon off UDP packets early in the handling of received UDP packets thereby avoiding the packet going through the UDP receive queue, it doesn't get ICMP packets through the UDP ->sk_error_report() callback. In fact, it doesn't appear that there's any usable option for getting hold of ICMP packets. Fix this by adding a new UDP encap hook to distribute error messages for UDP tunnels. If the hook is set, then the tunnel driver will be able to see ICMP packets. The hook provides the offset into the packet of the UDP header of the original packet that caused the notification. An alternative would be to call the ->error_handler() hook - but that requires that the skbuff be cloned (as ip_icmp_error() or ipv6_cmp_error() do, though isn't really necessary or desirable in rxrpc's case is we want to parse them there and then, not queue them). Changes ======= ver #3) - Fixed an uninitialised variable. ver #2) - Fixed some missing CONFIG_AF_RXRPC_IPV6 conditionals. Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: David Howells Signed-off-by: Sasha Levin

net: Fix data-races around sysctl_devconf_inherit_init_net.

2022-08-31T15:18:09+00:00

[ Upstream commit a5612ca10d1aa05624ebe72633e0c8c792970833 ] While reading sysctl_devconf_inherit_init_net, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 856c395cfa63 ("net: introduce a knob to control whether to inherit devconf config") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: Fix data-races around sysctl_optmem_max.

2022-08-31T15:18:08+00:00

[ Upstream commit 7de6d09f51917c829af2b835aba8bb5040f8e86a ] While reading sysctl_optmem_max, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: fix potential refcount leak in ndisc_router_discovery()

2022-08-25T09:45:33+00:00

commit 7396ba87f1edf549284869451665c7c4e74ecd4f upstream. The issue happens on specific paths in the function. After both the object `rt` and `neigh` are grabbed successfully, when `lifetime` is nonzero but the metric needs change, the function just deletes the route and set `rt` to NULL. Then, it may try grabbing `rt` and `neigh` again if above conditions hold. The function simply overwrite `neigh` if succeeds or returns if fails, without decreasing the reference count of previous `neigh`. This may result in memory leaks. Fix it by decrementing the reference count of `neigh` in place. Fixes: 6b2e04bc240f ("net: allow user to set metric on default route learned via Router Advertisement") Signed-off-by: Xin Xiong Signed-off-by: Xin Tan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman