Linux kernel stable tree https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/atom?h=linux-5.11.y 2021-03-30T12:30:21+00:00 2021-03-30T12:30:21+00:00 Brian Norris briannorris@chromium.org 2021-02-23T05:19:26+00:00 urn:sha1:331d42f56df84b813d7e5b7644409d905549239d [ Upstream commit 0f7e90faddeef53a3568f449a0c3992d77510b66 ] We observed some Cisco APs sending the following HE Operation IE in associate response: ff 0a 24 f4 3f 00 01 fc ff 00 00 00 Its HE operation parameter is 0x003ff4, so the expected total length is 7 which does not match the actual length = 10. This causes association failing with "HE AP is missing HE Capability/operation." According to P802.11ax_D4 Table9-94, HE operation is extensible, and according to 802.11-2016 10.27.8, STA should discard the part beyond the maximum length and parse the truncated element. Allow HE operation element to be longer than expected to handle this case and future extensions. Fixes: e4d005b80dee ("mac80211: refactor extended element parsing") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Yen-lin Lai <yenlinlai@chromium.org> Link: https://lore.kernel.org/r/20210223051926.2653301-1-yenlinlai@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2020-12-12T18:07:56+00:00 Jakub Kicinski kuba@kernel.org 2020-12-12T18:07:56+00:00 urn:sha1:00f7763a26cbf6673bceca7d69f931df31e48144 Johannes Berg says: ==================== A new set of wireless changes: * validate key indices for key deletion * more preamble support in mac80211 * various 6 GHz scan fixes/improvements * a common SAR power limitations API * various small fixes & code improvements * tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits) mac80211: add ieee80211_set_sar_specs nl80211: add common API to configure SAR power limitations mac80211: fix a mistake check for rx_stats update mac80211: mlme: save ssid info to ieee80211_bss_conf while assoc mac80211: Update rate control on channel change mac80211: don't filter out beacons once we start CSA mac80211: Fix calculation of minimal channel width mac80211: ignore country element TX power on 6 GHz mac80211: use bitfield helpers for BA session action frames mac80211: support Rx timestamp calculation for all preamble types mac80211: don't set set TDLS STA bandwidth wider than possible mac80211: support driver-based disconnect with reconnect hint cfg80211: support immediate reconnect request hint mac80211: use struct assignment for he_obss_pd cfg80211: remove struct ieee80211_he_bss_color nl80211: validate key indexes for cfg80211_registered_device cfg80211: include block-tx flag in channel switch started event mac80211: disallow band-switch during CSA ieee80211: update reduced neighbor report TBTT info length cfg80211: Save the regulatory domain when setting custom regulatory ... ==================== Link: https://lore.kernel.org/r/20201211142552.209018-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2020-12-12T06:29:38+00:00 Jakub Kicinski kuba@kernel.org 2020-12-12T04:12:36+00:00 urn:sha1:46d5e62dd3c34770f3bfd0642daa9a7772a00362 xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2020-12-11T12:20:05+00:00 Avraham Stern avraham.stern@intel.com 2020-12-06T12:54:45+00:00 urn:sha1:da3882331a55ba8c8eda0cfc077ad3b88c257e22 Add support for calculating the Rx timestamp for HE frames. Since now all frame types are supported, allow setting the Rx timestamp regardless of the frame type. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.4786559af475.Ia54486bb0a12e5351f9d5c60ef6fcda7c9e7141c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 2020-12-04T11:35:58+00:00 Wen Gong wgong@codeaurora.org 2020-11-23T08:45:52+00:00 urn:sha1:8fca2b8706f39f86312c086229e0cb364f8b4f97 ieee80211_chandef_he_6ghz_oper() needs to return true if it determined a value 6 GHz chandef, fix that. Fixes: 1d00ce807efa ("mac80211: support S1G association") Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/1606121152-3452-1-git-send-email-wgong@codeaurora.org [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 2020-11-13T20:03:22+00:00 Jakub Kicinski kuba@kernel.org 2020-11-13T20:03:21+00:00 urn:sha1:f8fd36b95ee4eb90846b5a61061e4bc4d890f021 Johannes Berg says: ==================== Some updates: * injection/radiotap updates for new test capabilities * remove WDS support - even years ago when we turned it off by default it was already basically unusable * support for HE (802.11ax) rates for beacons * support for some vendor-specific HE rates * many other small features/cleanups * tag 'mac80211-next-for-net-next-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (21 commits) nl80211: fix kernel-doc warning in the new SAE attribute cfg80211: remove WDS code mac80211: remove WDS-related code rt2x00: remove WDS code b43legacy: remove WDS code b43: remove WDS code carl9170: remove WDS code ath9k: remove WDS code wireless: remove CONFIG_WIRELESS_WDS mac80211: assure that certain drivers adhere to DONT_REORDER flag mac80211: don't overwrite QoS TID of injected frames mac80211: adhere to Tx control flag that prevents frame reordering mac80211: add radiotap flag to assure frames are not reordered mac80211: save HE oper info in BSS config for mesh cfg80211: add support to configure HE MCS for beacon rate nl80211: fix beacon tx rate mask validation nl80211/cfg80211: fix potential infinite loop cfg80211: Add support to calculate and report 4096-QAM HE rates cfg80211: Add support to configure SAE PWE value to drivers ieee80211: Add definition for WFA DPP ... ==================== Link: https://lore.kernel.org/r/20201113101148.25268-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2020-11-11T07:39:13+00:00 Johannes Berg johannes.berg@intel.com 2020-11-09T09:57:46+00:00 urn:sha1:70d9c59909df637da220e732672e4bf229702bde Now that all the mac80211-based drivers have removed WDS code and in particular the ability to advertise such devices, also remove all the code related to WDS here. Link: https://lore.kernel.org/r/20201109105103.38960c413d46.I3603c90a44562d847c39d15d5ff33d8c00df5834@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 2020-11-07T18:40:56+00:00 Allen Pais apais@linux.microsoft.com 2020-11-03T09:18:18+00:00 urn:sha1:da1cad7342a14c7027d95e361878b3442f1d93ad In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2020-09-28T13:05:53+00:00 Ben Greear greearb@candelatech.com 2020-09-22T19:19:56+00:00 urn:sha1:265a0708339daeb71848169f52b91066cc2984fd Allow drivers to request that interface-iterator does NOT iterate over interfaces that are not sdata-in-driver. This will allow us to fix crashes in ath10k (and possibly other drivers). To summarize Johannes' explanation: Consider add interface wlan0 add interface wlan1 iterate active interfaces -> wlan0 wlan1 add interface wlan2 iterate active interfaces -> wlan0 wlan1 wlan2 If you apply this scenario to a restart, which ought to be functionally equivalent to the normal startup, just compressed in time, you're basically saying that today you get add interface wlan0 add interface wlan1 iterate active interfaces -> wlan0 wlan1 wlan2 << problem here add interface wlan2 iterate active interfaces -> wlan0 wlan1 wlan2 which yeah, totally seems wrong. But fixing that to be add interface wlan0 add interface wlan1 iterate active interfaces -> <nothing> add interface wlan2 iterate active interfaces -> <nothing> (or maybe -> wlan0 wlan1 wlan2 if the reconfig already completed) This is also at least somewhat wrong, but better to not iterate over something that exists in the driver than iterate over something that does not. Originally the first issue was causing crashes in testing with lots of station vdevs on an ath10k radio, combined with firmware crashing. I ran with a similar patch for years with no obvious bad results, including significant testing with ath9k and ath10k. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20200922191957.25257-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 2020-09-28T12:09:07+00:00 Thomas Pedersen thomas@adapt-ip.com 2020-09-22T02:28:15+00:00 urn:sha1:1d00ce807efaa0ee3a96de7801be042a06d35873 The changes required for associating in S1G are: - apply S1G BSS channel info before assoc - mark all S1G STAs as QoS STAs - include and parse AID request element - handle new Association Response format - don't fail assoc if supported rates element is missing Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-15-thomas@adapt-ip.com [pass skb to ieee80211_add_aid_request_ie(), remove unused variable 'bss'] Signed-off-by: Johannes Berg <johannes.berg@intel.com>