kernel/git/stable/linux.git/net/mac80211, branch linux-4.13.y

mac80211: don't compare TKIP TX MIC key in reinstall prevention

2017-11-18T10:30:40+00:00

commit cfbb0d90a7abb289edc91833d0905931f8805f12 upstream. For the reinstall prevention, the code I had added compares the whole key. It turns out though that iwlwifi firmware doesn't provide the TKIP TX MIC key as it's not needed in client mode, and thus the comparison will always return false. For client mode, thus always zero out the TX MIC key part before doing the comparison in order to avoid accepting the reinstall of the key with identical encryption and RX MIC key, but not the same TX MIC key (since the supplicant provides the real one.) Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything") Signed-off-by: Johannes Berg Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

mac80211: use constant time comparison with keys

2017-11-18T10:30:39+00:00

commit 2bdd713b92a9cade239d3c7d15205a09f556624d upstream. Otherwise we risk leaking information via timing side channel. Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything") Signed-off-by: Jason A. Donenfeld Signed-off-by: Johannes Berg Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

mac80211: accept key reinstall without changing anything

2017-11-18T10:30:39+00:00

commit fdf7cb4185b60c68e1a75e61691c4afdc15dea0e upstream. When a key is reinstalled we can reset the replay counters etc. which can lead to nonce reuse and/or replay detection being impossible, breaking security properties, as described in the "KRACK attacks". In particular, CVE-2017-13080 applies to GTK rekeying that happened in firmware while the host is in D3, with the second part of the attack being done after the host wakes up. In this case, the wpa_supplicant mitigation isn't sufficient since wpa_supplicant doesn't know the GTK material. In case this happens, simply silently accept the new key coming from userspace but don't take any action on it since it's the same key; this keeps the PN replay counters intact. Signed-off-by: Johannes Berg Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

mac80211: fix deadlock in driver-managed RX BA session start

2017-10-05T07:47:25+00:00

commit bde59c475e0883e4c4294bcd9b9c7e08ae18c828 upstream. When an RX BA session is started by the driver, and it has to tell mac80211 about it, the corresponding bit in tid_rx_manage_offl gets set and the BA session work is scheduled. Upon testing this bit, it will call __ieee80211_start_rx_ba_session(), thus deadlocking as it already holds the ampdu_mlme.mtx, which that acquires again. Fix this by adding ___ieee80211_start_rx_ba_session(), a version of the function that requires the mutex already held. Fixes: 699cb58c8a52 ("mac80211: manage RX BA session offload without SKB queue") Reported-by: Matteo Croce Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

mac80211: flush hw_roc_start work before cancelling the ROC

2017-10-05T07:47:25+00:00

commit 6e46d8ce894374fc135c96a8d1057c6af1fef237 upstream. When HW ROC is supported it is possible that after the HW notified that the ROC has started, the ROC was cancelled and another ROC was added while the hw_roc_start worker is waiting on the mutex (since cancelling the ROC and adding another one also holds the same mutex). As a result, the hw_roc_start worker will continue to run after the new ROC is added but before it is actually started by the HW. This may result in notifying userspace that the ROC has started before it actually does, or in case of management tx ROC, in an attempt to tx while not on the right channel. In addition, when the driver will notify mac80211 that the second ROC has started, mac80211 will warn that this ROC has already been notified. Fix this by flushing the hw_roc_start work before cancelling an ROC. Cc: stable@vger.kernel.org Signed-off-by: Avraham Stern Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

mac80211: fix VLAN handling with TXQs

2017-10-05T07:47:25+00:00

commit 53168215909281a09d3afc6fb51a9d4f81f74d39 upstream. With TXQs, the AP_VLAN interfaces are resolved to their owner AP interface when enqueuing the frame, which makes sense since the frame really goes out on that as far as the driver is concerned. However, this introduces a problem: frames to be encrypted with a VLAN-specific GTK will now be encrypted with the AP GTK, since the information about which virtual interface to use to select the key is taken from the TXQ. Fix this by preserving info->control.vif and using that in the dequeue function. This now requires doing the driver-mapping in the dequeue as well. Since there's no way to filter the frames that are sitting on a TXQ, drop all frames, which may affect other interfaces, when an AP_VLAN is removed. Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

mac80211: add api to start ba session timer expired flow

2017-08-09T06:49:42+00:00

Some drivers handle rx buffer reordering internally (and by extension handle also the rx ba session timer internally), but do not ofload the addba/delba negotiation. Add an api for these drivers to properly tear-down the ba session, including sending a delba. Signed-off-by: Naftali Goldstein Signed-off-by: Luca Coelho

net: manual clean code which call skb_put_[data:zero]

2017-06-20T17:30:15+00:00

Signed-off-by: yuan linyu Signed-off-by: David S. Miller

networking: make skb_push & __skb_push return void pointers

2017-06-16T15:48:40+00:00

It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

networking: make skb_put & friends return void pointers

2017-06-16T15:48:39+00:00

It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller