kernel/git/stable/linux.git/net/rxrpc, branch linux-4.17.y

rxrpc: Fix the keepalive generator [ver #2]

2018-08-22T05:44:52+00:00

[ Upstream commit 330bdcfadceea5e9a1526d731711e163f9a90975 ] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot Signed-off-by: David Howells Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

rxrpc: Fix user call ID check in rxrpc_service_prealloc_one

2018-08-06T14:18:19+00:00

[ Upstream commit c01f6c9b3207e52fc9973a066a856ddf7a0538d8 ] There just check the user call ID isn't already in use, hence should compare user_call_ID with xcall->user_call_ID, which is current node's user_call_ID. Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg") Suggested-by: David Howells Signed-off-by: YueHaibing Signed-off-by: David Howells Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

rxrpc: Fix terminal retransmission connection ID to include the channel

2018-08-03T05:47:35+00:00

[ Upstream commit fb1967a69f756073362b8f19347f863f227320ad ] When retransmitting the final ACK or ABORT packet for a call, the cid field in the packet header is set to the connection's cid, but this is incorrect as it also needs to include the channel number on that connection that the call was made on. Fix this by OR'ing in the channel number. Note that this fixes the bug that: commit 1a025028d400b23477341aa7ec2ce55f8b39b554 rxrpc: Fix handling of call quietly cancelled out on server works around. I'm not intending to revert that as it will help protect against problems that might occur on the server. Fixes: 3136ef49a14c ("rxrpc: Delay terminal ACK transmission on a client call") Signed-off-by: David Howells Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

rxrpc: Trace UDP transmission failure

2018-05-10T22:26:01+00:00

Add a tracepoint to log transmission failure from the UDP transport socket being used by AF_RXRPC. Signed-off-by: David Howells

rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages

2018-05-10T22:26:01+00:00

Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells

rxrpc: Fix the min security level for kernel calls

2018-05-10T22:26:01+00:00

Fix the kernel call initiation to set the minimum security level for kernel initiated calls (such as from kAFS) from the sockopt value. Fixes: 19ffa01c9c45 ("rxrpc: Use structs to hold connection params and protocol info") Signed-off-by: David Howells

rxrpc: Fix error reception on AF_INET6 sockets

2018-05-10T22:26:00+00:00

AF_RXRPC tries to turn on IP_RECVERR and IP_MTU_DISCOVER on the UDP socket it just opened for communications with the outside world, regardless of the type of socket. Unfortunately, this doesn't work with an AF_INET6 socket. Fix this by turning on IPV6_RECVERR and IPV6_MTU_DISCOVER instead if the socket is of the AF_INET6 family. Without this, kAFS server and address rotation doesn't work correctly because the algorithm doesn't detect received network errors. Fixes: 75b54cb57ca3 ("rxrpc: Add IPv6 support") Signed-off-by: David Howells

rxrpc: Fix missing start of call timeout

2018-05-10T22:26:00+00:00

The expect_rx_by call timeout is supposed to be set when a call is started to indicate that we need to receive a packet by that point. This is currently put back every time we receive a packet, but it isn't started when we first send a packet. Without this, the call may wait forever if the server doesn't deign to reply. Fix this by setting the timeout upon a successful UDP sendmsg call for the first DATA packet. The timeout is initiated only for initial transmission and not for subsequent retries as we don't want the retry mechanism to extend the timeout indefinitely. Fixes: a158bdd3247b ("rxrpc: Fix call timeouts") Reported-by: Marc Dionne Signed-off-by: David Howells

rxrpc: Fix undefined packet handling

2018-04-04T15:04:08+00:00

By analogy with other Rx implementations, RxRPC packet types 9, 10 and 11 should just be discarded rather than being aborted like other undefined packet types. Reported-by: Jeffrey Altman Signed-off-by: David Howells Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-04-03T21:04:18+00:00

Pull networking updates from David Miller: 1) Support offloading wireless authentication to userspace via NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari. 2) A lot of work on network namespace setup/teardown from Kirill Tkhai. Setup and cleanup of namespaces now all run asynchronously and thus performance is significantly increased. 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon Streiff. 4) Support zerocopy on RDS sockets, from Sowmini Varadhan. 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel Borkmann. 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime Chevallier. 7) Support grafting of child qdiscs in mlxsw driver, from Nogah Frankel. 8) Add packet forwarding tests to selftests, from Ido Schimmel. 9) Deal with sub-optimal GSO packets better in BBR congestion control, from Eric Dumazet. 10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern. 11) Add path MTU tests to selftests, from Stefano Brivio. 12) Various bits of IPSEC offloading support for mlx5, from Aviad Yehezkel, Yossi Kuperman, and Saeed Mahameed. 13) Support RSS spreading on ntuple filters in SFC driver, from Edward Cree. 14) Lots of sockmap work from John Fastabend. Applications can use eBPF to filter sendmsg and sendpage operations. 15) In-kernel receive TLS support, from Dave Watson. 16) Add XDP support to ixgbevf, this is significant because it should allow optimized XDP usage in various cloud environments. From Tony Nguyen. 17) Add new Intel E800 series "ice" ethernet driver, from Anirudh Venkataramanan et al. 18) IP fragmentation match offload support in nfp driver, from Pieter Jansen van Vuuren. 19) Support XDP redirect in i40e driver, from Björn Töpel. 20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of tracepoints in their raw form, from Alexei Starovoitov. 21) Lots of striding RQ improvements to mlx5 driver with many performance improvements, from Tariq Toukan. 22) Use rhashtable for inet frag reassembly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits) net: mvneta: improve suspend/resume net: mvneta: split rxq/txq init and txq deinit into SW and HW parts ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh net: bgmac: Fix endian access in bgmac_dma_tx_ring_free() net: bgmac: Correctly annotate register space route: check sysctl_fib_multipath_use_neigh earlier than hash fix typo in command value in drivers/net/phy/mdio-bitbang. sky2: Increase D3 delay to sky2 stops working after suspend net/mlx5e: Set EQE based as default TX interrupt moderation mode ibmvnic: Disable irqs before exiting reset from closed state net: sched: do not emit messages while holding spinlock vlan: also check phy_driver ts_info for vlan's real device Bluetooth: Mark expected switch fall-throughs Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME Bluetooth: btrsi: remove unused including Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4 sh_eth: kill useless check in __sh_eth_get_regs() sh_eth: add sh_eth_cpu_data::no_xdfar flag ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data() ipv4: factorize sk_wmem_alloc updates done by __ip_append_data() ...