kernel/git/stable/linux.git/net/tls, branch linux-5.8.y

net/tls: sendfile fails with ktls offload

2020-10-29T09:07:01+00:00

[ Upstream commit ea1dd3e9d080c961b9a451130b61c72dc9a5397b ] At first when sendpage gets called, if there is more data, 'more' in tls_push_data() gets set which later sets pending_open_record_frags, but when there is no more data in file left, and last time tls_push_data() gets called, pending_open_record_frags doesn't get reset. And later when 2 bytes of encrypted alert comes as sendmsg, it first checks for pending_open_record_frags, and since this is set, it creates a record with 0 data bytes to encrypt, meaning record length is prepend_size + tag_size only, which causes problem. We should set/reset pending_open_record_frags based on more bit. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Rohit Maheshwari Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net/tls: race causes kernel panic

2020-10-14T09:55:59+00:00

commit 38f7e1c0c43dd25b06513137bb6fd35476f9ec6d upstream. BUG: kernel NULL pointer dereference, address: 00000000000000b8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000008b6fef067 P4D 80000008b6fef067 PUD 8b6fe6067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 12 PID: 23871 Comm: kworker/12:80 Kdump: loaded Tainted: G S 5.9.0-rc3+ #1 Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.1 03/29/2018 Workqueue: events tx_work_handler [tls] RIP: 0010:tx_work_handler+0x1b/0x70 [tls] Code: dc fe ff ff e8 16 d4 a3 f6 66 0f 1f 44 00 00 0f 1f 44 00 00 55 53 48 8b 6f 58 48 8b bd a0 04 00 00 48 85 ff 74 1c 48 8b 47 28 <48> 8b 90 b8 00 00 00 83 e2 02 75 0c f0 48 0f ba b0 b8 00 00 00 00 RSP: 0018:ffffa44ace61fe88 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff91da9e45cc30 RCX: dead000000000122 RDX: 0000000000000001 RSI: ffff91da9e45cc38 RDI: ffff91d95efac200 RBP: ffff91da133fd780 R08: 0000000000000000 R09: 000073746e657665 R10: 8080808080808080 R11: 0000000000000000 R12: ffff91dad7d30700 R13: ffff91dab6561080 R14: 0ffff91dad7d3070 R15: ffff91da9e45cc38 FS: 0000000000000000(0000) GS:ffff91dad7d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b8 CR3: 0000000906478003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: process_one_work+0x1a7/0x370 worker_thread+0x30/0x370 ? process_one_work+0x370/0x370 kthread+0x114/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 tls_sw_release_resources_tx() waits for encrypt_pending, which can have race, so we need similar changes as in commit 0cada33241d9de205522e3858b18e506ca5cce2c here as well. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Signed-off-by: Rohit Maheshwari Acked-by: Jakub Kicinski Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/tls: Fix kmap usage

2020-08-19T06:26:59+00:00

[ Upstream commit b06c19d9f827f6743122795570bfc0c72db482b0 ] When MSG_OOB is specified to tls_device_sendpage() the mapped page is never unmapped. Hold off mapping the page until after the flags are checked and the page is actually needed. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Ira Weiny Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

Merge branch 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux

2020-06-10T21:46:54+00:00

Pull READ/WRITE_ONCE rework from Will Deacon: "This the READ_ONCE rework I've been working on for a while, which bumps the minimum GCC version and improves code-gen on arm64 when stack protector is enabled" [ Side note: I'm _really_ tempted to raise the minimum gcc version to 4.9, so that we can just say that we require _Generic() support. That would allow us to more cleanly handle a lot of the cases where we depend on very complex macros with 'sizeof' or __builtin_choose_expr() with __builtin_types_compatible_p() etc. This branch has a workaround for sparse not handling _Generic(), either, but that was already fixed in the sparse development branch, so it's really just gcc-4.9 that we'd require. - Linus ] * 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux: compiler_types.h: Use unoptimized __unqual_scalar_typeof for sparse compiler_types.h: Optimize __unqual_scalar_typeof compilation time compiler.h: Enforce that READ_ONCE_NOCHECK() access size is sizeof(long) compiler-types.h: Include naked type in __pick_integer_type() match READ_ONCE: Fix comment describing 2x32-bit atomicity gcov: Remove old GCC 3.4 support arm64: barrier: Use '__unqual_scalar_typeof' for acquire/release macros locking/barriers: Use '__unqual_scalar_typeof' for load-acquire macros READ_ONCE: Drop pointer qualifiers when reading from scalar types READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses READ_ONCE: Simplify implementations of {READ,WRITE}_ONCE() arm64: csum: Disable KASAN for do_csum() fault_inject: Don't rely on "return value" from WRITE_ONCE() net: tls: Avoid assigning 'const' pointer to non-const pointer netfilter: Avoid assigning 'const' pointer to non-const pointer compiler/gcc: Raise minimum GCC version for kernel builds to 4.8

bpf: Fix running sk_skb program types with ktls

2020-06-01T21:48:32+00:00

KTLS uses a stream parser to collect TLS messages and send them to the upper layer tls receive handler. This ensures the tls receiver has a full TLS header to parse when it is run. However, when a socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS is enabled we end up with two stream parsers running on the same socket. The result is both try to run on the same socket. First the KTLS stream parser runs and calls read_sock() which will tcp_read_sock which in turn calls tcp_rcv_skb(). This dequeues the skb from the sk_receive_queue. When this is done KTLS code then data_ready() callback which because we stacked KTLS on top of the bpf stream verdict program has been replaced with sk_psock_start_strp(). This will in turn kick the stream parser again and eventually do the same thing KTLS did above calling into tcp_rcv_skb() and dequeuing a skb from the sk_receive_queue. At this point the data stream is broke. Part of the stream was handled by the KTLS side some other bytes may have been handled by the BPF side. Generally this results in either missing data or more likely a "Bad Message" complaint from the kTLS receive handler as the BPF program steals some bytes meant to be in a TLS header and/or the TLS header length is no longer correct. We've already broke the idealized model where we can stack ULPs in any order with generic callbacks on the TX side to handle this. So in this patch we do the same thing but for RX side. We add a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict program is running and add a tls_sw_has_ctx_rx() helper so BPF side can learn there is a TLS ULP on the socket. Then on BPF side we omit calling our stream parser to avoid breaking the data stream for the KTLS receiver. Then on the KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS receiver is done with the packet but before it posts the msg to userspace. This gives us symmetry between the TX and RX halfs and IMO makes it usable again. On the TX side we process packets in this order BPF -> TLS -> TCP and on the receive side in the reverse order TCP -> TLS -> BPF. Discovered while testing OpenSSL 3.0 Alpha2.0 release. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-06-01T00:48:46+00:00

xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller

net/tls: Add force_resync for driver resync

2020-05-27T22:07:13+00:00

This patch adds a field to the tls rx offload context which enables drivers to force a send_resync call. This field can be used by drivers to request a resync at the next possible tls record. It is beneficial for hardware that provides the resync sequence number asynchronously. In such cases, the packet that triggered the resync does not contain the information required for a resync. Instead, the driver requests resync for all the following TLS record until the asynchronous notification with the resync request TCP sequence arrives. A following series for mlx5e ConnectX-6DX TLS RX offload support will use this mechanism. Signed-off-by: Boris Pismenny Signed-off-by: Tariq Toukan Reviewed-by: Maxim Mikityanskiy Reviewed-by: Saeed Mahameed Signed-off-by: David S. Miller

net/tls: fix race condition causing kernel panic

2020-05-26T00:41:40+00:00

tls_sw_recvmsg() and tls_decrypt_done() can be run concurrently. // tls_sw_recvmsg() if (atomic_read(&ctx->decrypt_pending)) crypto_wait_req(-EINPROGRESS, &ctx->async_wait); else reinit_completion(&ctx->async_wait.completion); //tls_decrypt_done() pending = atomic_dec_return(&ctx->decrypt_pending); if (!pending && READ_ONCE(ctx->async_notify)) complete(&ctx->async_wait.completion); Consider the scenario tls_decrypt_done() is about to run complete() if (!pending && READ_ONCE(ctx->async_notify)) and tls_sw_recvmsg() reads decrypt_pending == 0, does reinit_completion(), then tls_decrypt_done() runs complete(). This sequence of execution results in wrong completion. Consequently, for next decrypt request, it will not wait for completion, eventually on connection close, crypto resources freed, there is no way to handle pending decrypt response. This race condition can be avoided by having atomic_read() mutually exclusive with atomic_dec_return(),complete().Intoduced spin lock to ensure the mutual exclution. Addressed similar problem in tx direction. v1->v2: - More readable commit message. - Corrected the lock to fix new race scenario. - Removed barrier which is not needed now. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Signed-off-by: Vinay Kumar Yadav Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller

net/tls: free record only on encryption error

2020-05-22T00:20:06+00:00

We cannot free record on any transient error because it leads to losing previos data. Check socket error to know whether record must be freed or not. Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Signed-off-by: Vadim Fedorenko Signed-off-by: David S. Miller