<feed xmlns='http://www.w3.org/2005/Atom'>
<title>kernel/git/stable/linux.git/security/dummy.c, branch linux-2.6.19.y</title>
<subtitle>Linux kernel stable tree</subtitle>
<id>https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/atom?h=linux-2.6.19.y</id>
<link rel='self' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/atom?h=linux-2.6.19.y'/>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/'/>
<updated>2006-10-12T06:59:37+00:00</updated>
<entry>
<title>IPsec: correct semantics for SELinux policy matching</title>
<updated>2006-10-12T06:59:37+00:00</updated>
<author>
<name>Venkat Yekkirala</name>
<email>vyekkirala@trustedcs.com</email>
</author>
<published>2006-10-05T20:42:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5b368e61c2bcb2666bb66e2acf1d6d85ba6f474d'/>
<id>urn:sha1:5b368e61c2bcb2666bb66e2acf1d6d85ba6f474d</id>
<content type='text'>
Currently when an IPSec policy rule doesn't specify a security
context, it is assumed to be "unlabeled" by SELinux, and so
the IPSec policy rule fails to match to a flow that it would
otherwise match to, unless one has explicitly added an SELinux
policy rule allowing the flow to "polmatch" to the "unlabeled"
IPSec policy rules. In the absence of such an explicitly added
SELinux policy rule, the IPSec policy rule fails to match and
so the packet(s) flow in clear text without the otherwise applicable
xfrm(s) applied.

The above SELinux behavior violates the SELinux security notion of
"deny by default" which should actually translate to "encrypt by
default" in the above case.

This was first reported by Evgeniy Polyakov and the way James Morris
was seeing the problem was when connecting via IPsec to a
confined service on an SELinux box (vsftpd), which did not have the
appropriate SELinux policy permissions to send packets via IPsec.

With this patch applied, SELinux "polmatching" of flows Vs. IPSec
policy rules will only come into play when there's a explicit context
specified for the IPSec policy rule (which also means there's corresponding
SELinux policy allowing appropriate domains/flows to polmatch to this context).

Secondly, when a security module is loaded (in this case, SELinux), the
security_xfrm_policy_lookup() hook can return errors other than access denied,
such as -EINVAL.  We were not handling that correctly, and in fact
inverting the return logic and propagating a false "ok" back up to
xfrm_lookup(), which then allowed packets to pass as if they were not
associated with an xfrm policy.

The solution for this is to first ensure that errno values are
correctly propagated all the way back up through the various call chains
from security_xfrm_policy_lookup(), and handled correctly.

Then, flow_cache_lookup() is modified, so that if the policy resolver
fails (typically a permission denied via the security module), the flow
cache entry is killed rather than having a null policy assigned (which
indicates that the packet can pass freely).  This also forces any future
lookups for the same flow to consult the security module (e.g. SELinux)
for current security policy (rather than, say, caching the error on the
flow cache entry).

This patch: Fix the selinux side of things.

This makes sure SELinux polmatching of flow contexts to IPSec policy
rules comes into play only when an explicit context is associated
with the IPSec policy rule.

Also, this no longer defaults the context of a socket policy to
the context of the socket since the "no explicit context" case
is now handled properly.

Signed-off-by: Venkat Yekkirala &lt;vyekkirala@TrustedCS.com&gt;
Signed-off-by: James Morris &lt;jmorris@namei.org&gt;
</content>
</entry>
<entry>
<title>[NetLabel]: SELinux support</title>
<updated>2006-09-22T21:53:36+00:00</updated>
<author>
<name>Venkat Yekkirala</name>
<email>vyekkirala@TrustedCS.com</email>
</author>
<published>2006-08-05T06:17:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7420ed23a4f77480b5b7b3245e5da30dd24b7575'/>
<id>urn:sha1:7420ed23a4f77480b5b7b3245e5da30dd24b7575</id>
<content type='text'>
Add NetLabel support to the SELinux LSM and modify the
socket_post_create() LSM hook to return an error code.  The most
significant part of this patch is the addition of NetLabel hooks into
the following SELinux LSM hooks:

 * selinux_file_permission()
 * selinux_socket_sendmsg()
 * selinux_socket_post_create()
 * selinux_socket_sock_rcv_skb()
 * selinux_socket_getpeersec_stream()
 * selinux_socket_getpeersec_dgram()
 * selinux_sock_graft()
 * selinux_inet_conn_request()

The basic reasoning behind this patch is that outgoing packets are
"NetLabel'd" by labeling their socket and the NetLabel security
attributes are checked via the additional hook in
selinux_socket_sock_rcv_skb().  NetLabel itself is only a labeling
mechanism, similar to filesystem extended attributes, it is up to the
SELinux enforcement mechanism to perform the actual access checks.

In addition to the changes outlined above this patch also includes
some changes to the extended bitmap (ebitmap) and multi-level security
(mls) code to import and export SELinux TE/MLS attributes into and out
of NetLabel.

Signed-off-by: Paul Moore &lt;paul.moore@hp.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
</entry>
<entry>
<title>[MLSXFRM]: Auto-labeling of child sockets</title>
<updated>2006-09-22T21:53:29+00:00</updated>
<author>
<name>Venkat Yekkirala</name>
<email>vyekkirala@TrustedCS.com</email>
</author>
<published>2006-07-25T06:32:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4237c75c0a35535d7f9f2bfeeb4b4df1e068a0bf'/>
<id>urn:sha1:4237c75c0a35535d7f9f2bfeeb4b4df1e068a0bf</id>
<content type='text'>
This automatically labels the TCP, Unix stream, and dccp child sockets
as well as openreqs to be at the same MLS level as the peer. This will
result in the selection of appropriately labeled IPSec Security
Associations.

This also uses the sock's sid (as opposed to the isec sid) in SELinux
enforcement of secmark in rcv_skb and postroute_last hooks.

Signed-off-by: Venkat Yekkirala &lt;vyekkirala@TrustedCS.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
</entry>
<entry>
<title>[MLSXFRM]: Default labeling of socket specific IPSec policies</title>
<updated>2006-09-22T21:53:28+00:00</updated>
<author>
<name>Venkat Yekkirala</name>
<email>vyekkirala@TrustedCS.com</email>
</author>
<published>2006-07-25T06:32:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cb969f072b6d67770b559617f14e767f47e77ece'/>
<id>urn:sha1:cb969f072b6d67770b559617f14e767f47e77ece</id>
<content type='text'>
This defaults the label of socket-specific IPSec policies to be the
same as the socket they are set on.

Signed-off-by: Venkat Yekkirala &lt;vyekkirala@TrustedCS.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
</entry>
<entry>
<title>[MLSXFRM]: Add flow labeling</title>
<updated>2006-09-22T21:53:27+00:00</updated>
<author>
<name>Venkat Yekkirala</name>
<email>vyekkirala@TrustedCS.com</email>
</author>
<published>2006-08-05T06:12:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=beb8d13bed80f8388f1a9a107d07ddd342e627e8'/>
<id>urn:sha1:beb8d13bed80f8388f1a9a107d07ddd342e627e8</id>
<content type='text'>
This labels the flows that could utilize IPSec xfrms at the points the
flows are defined so that IPSec policy and SAs at the right label can
be used.

The following protos are currently not handled, but they should
continue to be able to use single-labeled IPSec like they currently
do.

ipmr
ip_gre
ipip
igmp
sit
sctp
ip6_tunnel (IPv6 over IPv6 tunnel device)
decnet

Signed-off-by: Venkat Yekkirala &lt;vyekkirala@TrustedCS.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
</entry>
<entry>
<title>[MLSXFRM]: Flow based matching of xfrm policy and state</title>
<updated>2006-09-22T21:53:24+00:00</updated>
<author>
<name>Venkat Yekkirala</name>
<email>vyekkirala@TrustedCS.com</email>
</author>
<published>2006-07-25T06:29:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e0d1caa7b0d5f02e4f34aa09c695d04251310c6c'/>
<id>urn:sha1:e0d1caa7b0d5f02e4f34aa09c695d04251310c6c</id>
<content type='text'>
This implements a seemless mechanism for xfrm policy selection and
state matching based on the flow sid. This also includes the necessary
SELinux enforcement pieces.

Signed-off-by: Venkat Yekkirala &lt;vyekkirala@TrustedCS.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
</entry>
<entry>
<title>[MLSXFRM]: Add security sid to sock</title>
<updated>2006-09-22T21:53:22+00:00</updated>
<author>
<name>Venkat Yekkirala</name>
<email>vyekkirala@TrustedCS.com</email>
</author>
<published>2006-08-05T06:08:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=892c141e62982272b9c738b5520ad0e5e1ad7b42'/>
<id>urn:sha1:892c141e62982272b9c738b5520ad0e5e1ad7b42</id>
<content type='text'>
This adds security for IP sockets at the sock level. Security at the
sock level is needed to enforce the SELinux security policy for
security associations even when a sock is orphaned (such as in the TCP
LAST_ACK state).

This will also be used to enforce SELinux controls over data arriving
at or leaving a child socket while it's still waiting to be accepted.

Signed-off-by: Venkat Yekkirala &lt;vyekkirala@TrustedCS.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
</entry>
<entry>
<title>[AF_UNIX]: Kernel memory leak fix for af_unix datagram getpeersec patch</title>
<updated>2006-08-02T21:12:06+00:00</updated>
<author>
<name>Catherine Zhang</name>
<email>cxzhang@watson.ibm.com</email>
</author>
<published>2006-08-02T21:12:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=dc49c1f94e3469d94b952e8f5160dd4ccd791d79'/>
<id>urn:sha1:dc49c1f94e3469d94b952e8f5160dd4ccd791d79</id>
<content type='text'>
From: Catherine Zhang &lt;cxzhang@watson.ibm.com&gt;

This patch implements a cleaner fix for the memory leak problem of the
original unix datagram getpeersec patch.  Instead of creating a
security context each time a unix datagram is sent, we only create the
security context when the receiver requests it.

This new design requires modification of the current
unix_getsecpeer_dgram LSM hook and addition of two new hooks, namely,
secid_to_secctx and release_secctx.  The former retrieves the security
context and the latter releases it.  A hook is required for releasing
the security context because it is up to the security module to decide
how that's done.  In the case of Selinux, it's a simple kfree
operation.

Acked-by:  Stephen Smalley &lt;sds@tycho.nsa.gov&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial</title>
<updated>2006-06-30T22:39:30+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@g5.osdl.org</email>
</author>
<published>2006-06-30T22:39:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=22a3e233ca08a2ddc949ba1ae8f6e16ec7ef1a13'/>
<id>urn:sha1:22a3e233ca08a2ddc949ba1ae8f6e16ec7ef1a13</id>
<content type='text'>
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  Remove obsolete #include &lt;linux/config.h&gt;
  remove obsolete swsusp_encrypt
  arch/arm26/Kconfig typos
  Documentation/IPMI typos
  Kconfig: Typos in net/sched/Kconfig
  v9fs: do not include linux/version.h
  Documentation/DocBook/mtdnand.tmpl: typo fixes
  typo fixes: specfic -&gt; specific
  typo fixes in Documentation/networking/pktgen.txt
  typo fixes: occuring -&gt; occurring
  typo fixes: infomation -&gt; information
  typo fixes: disadvantadge -&gt; disadvantage
  typo fixes: aquire -&gt; acquire
  typo fixes: mecanism -&gt; mechanism
  typo fixes: bandwith -&gt; bandwidth
  fix a typo in the RTC_CLASS help text
  smb is no longer maintained

Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
</content>
</entry>
<entry>
<title>[PATCH] SELinux: Add security hook definition for getioprio and insert hooks</title>
<updated>2006-06-30T18:25:37+00:00</updated>
<author>
<name>David Quigley</name>
<email>dpquigl@tycho.nsa.gov</email>
</author>
<published>2006-06-30T08:55:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a1836a42daf5ddfe9a891973734bd9a7d62eb504'/>
<id>urn:sha1:a1836a42daf5ddfe9a891973734bd9a7d62eb504</id>
<content type='text'>
Add a new security hook definition for the sys_ioprio_get operation.  At
present, the SELinux hook function implementation for this hook is
identical to the getscheduler implementation but a separate hook is
introduced to allow this check to be specialized in the future if
necessary.

This patch also creates a helper function get_task_ioprio which handles the
access check in addition to retrieving the ioprio value for the task.

Signed-off-by: David Quigley &lt;dpquigl@tycho.nsa.gov&gt;
Acked-by: Stephen Smalley &lt;sds@tycho.nsa.gov&gt;
Signed-off-by: James Morris &lt;jmorris@namei.org&gt;
Cc: Jens Axboe &lt;axboe@suse.de&gt;
Signed-off-by: Andrew Morton &lt;akpm@osdl.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@osdl.org&gt;
</content>
</entry>
</feed>
