kernel/git/stable/linux.git/sound/firewire/Kconfig, branch linux-3.19.y

ALSA: oxfw: Add hwdep interface

2014-12-10T09:50:00+00:00

This interface is designed for mixer/control application. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto Acked-by: Clemens Ladisch Signed-off-by: Takashi Iwai

ALSA: oxfw: Add support for Behringer/Mackie devices

2014-12-10T09:48:30+00:00

Some devices produced by Behringer/Mackie are based on OXFW970/971. This commit adds support for them. Additionally, this commit changes the way to name card with some information in config rom. Ids of some Mackie(Loud) models are not identified, therefore this commit applies name detection for these models. The devices support capture/playback of PCM-samples and some of them supports capture/playback of MIDI messages. These functionalities are implemented by followed commits. Signed-off-by: Takashi Sakamoto Acked-by: Clemens Ladisch Signed-off-by: Takashi Iwai

ALSA: dice: Add support for capturing PCM samples

2014-12-10T09:45:53+00:00

This commit adds a support for capturing PCM samples. When opposite PCM substream is already running, available sampling rate is limited at current one. Signed-off-by: Takashi Sakamoto Acked-by: Clemens Ladisch Signed-off-by: Takashi Iwai

ALSA: speakers: Rename to oxfw and rename some members

2014-11-29T19:21:15+00:00

This commit renames 'firewire-speakers' to 'oxfw' to enhance support for devices which based on OXFW970/971. A line for MODULE_ALIAS is added. Additionally, to help for works in followed paches, some members in private structure are renamed. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: dice: remove experimental state

2014-11-29T19:20:23+00:00

Some developers test this driver, thus it's better to remove its experimental state. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: firewire: trivial typo fixes in Kconfig

2014-07-28T08:26:42+00:00

ESI Quotafire -> QuataFire TerraTec EWS Mic4 -> Mic8 Firewire -> FireWire Signed-off-by: Stefan Richter Reviewed-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: firewire: Fix dependency on PCM and rawmidi

2014-05-30T13:22:06+00:00

Now snd-firewire-lib supports rawmidi in addition to PCM, thus we need to give a proper dependency. For fixing and simplification, move the selections of SND_PCM and SND_RAWMIDI into SND_FIREWIRE_LIB section. Then each driver doesn't have to select them but only SND_FIREWIRE_LIB. Reported-by: Jim Davis Reviewed-by: Takashi Sakamoto Tested-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: bebob: Add support for M-Audio special Firewire series

2014-05-26T12:32:21+00:00

This commit allows this driver to support some models which M-Audio produces with DM1000 but its firmware is special. They are: - Firewire 1814 - ProjectMix I/O They have heavily customized firmware. The usual operations can't be applied to them. For this reason, this commit adds a model specific member to 'struct snd_bebob' and some model specific functions. Some parameters are write-only so this commit also adds control interface for applications to set them. M-Audio special firmware quirks: - Just after powering on, they wait to download firmware. This state is changed when receiving cue. Then bus reset is generated and the device is recognized as a different model with the uploaded firmware. - They don't respond against BridgeCo AV/C extension commands. So drivers can't get their stream formations and so on. - They do not start to transmit packets only by establishing connection but also by receiving SIGNAL FORMAT command. - After booting up, they often fail to send response against driver's request due to mismatch of gap_count. This module don't support to upload firmware. Tested-by: Darren Anderson (ProjectMix I/O) Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: bebob: Add support for M-Audio usual Firewire series

2014-05-26T12:32:03+00:00

This commit allows this driver to support some models which M-Audio produces with DM1000/DM1000E with usual firmware. They are: - Firewire 410 - Firewire AudioPhile - Firewire Solo - Ozonic - NRV10 - FirewireLightBridge According to a person who worked in BridgeCo, some models are produced with 'Pre-BeBoB'. This means that these products were released before BeBoB was officially produced, and later BeBoB specification was formed. So these models have some quirks. M-Audio usual firmware quirks: - Just after powering on, 'Firewire 410' waits to download firmware. This state is changed when receiving cue. Then bus reset is generated and the device is recognized as a different model with the uploaded firmware. - 'Firewire Audiophile' also waits to download firmware but its vendor id/model id is the same as the one after loading firmware. - The information of channel mapping for MIDI conformant data channel is invalid against BridgeCo specification. This commit adds some codes for these quirks but don't support to upload firmware. This commit also adds specific operations to get metering information. The metering information also includes status of clock synchronization if the model supports to switch source of clock. The specification of FirewireLightBridge is unknown. So in this time, normal operations are applied for this model. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series

2014-05-26T12:31:50+00:00

This commit allows this driver to support all of models which Focusrite produces with DM1000/BeBoB. They are: - Saffire - Saffire LE - SaffirePro 10 I/O - SaffirePro 26 I/O This commit adds Focusrite specific operations: 1. Get source of clock 2. Get/Set sampling frequency 3. Get metering information The driver uses these functionalities to read/write specific address by async transaction. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai