kernel/git/stable/linux.git/sound/firewire/Kconfig, branch linux-5.2.y

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ALSA: fireface: add support for Fireface UCX

2019-01-21T14:12:25+00:00

Fireface UFX was shipped by RME GmbH in 2012. This model supports later protocol for management of isochronous communication and synchronization of sampling transmission frequency. This commit adds support for the model. At present, it's not clear how to encode MIDI messages and decide destination address for asynchronous transaction, thus this commit adds support for isochronous communication for PCM frames only. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: fireface: add support for Fireface 800 with MIDI functionality only

2018-12-11T13:58:01+00:00

Fireface 800 is a flagship model of RME GmbH for audio and music units on IEEE 1394 bus, shipped 2004. This model consists of four chips: - TI TSB81BA3D for physical layer on cable environment of EEE 1394 bus - TI TSB82AA2 for link layer for 1394 OHCI bus bridge to PCI bus - Xilinx Spartan-3 FPGA XC3S400 - Xilinx High-Performance CPLD XC9572XL This commit adds support Fireface 800. In this time, the support is restricted to its MIDI functionality, thus this commit adds some condition statements to avoid touching streaming functionality. Unlike Fireface 400, Fireface 800 has no functionality to suppress asynchronous transactions for MIDI messages except for unregister of listen address in controller side, thus the feature is available as is. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: oxfw: add support for APOGEE duet FireWire

2018-11-13T11:02:01+00:00

This commit adds support for APOGEE duet FireWire, launched 2007, already discontinued. This model uses Oxford Semiconductor FW971 as its communication engine. Below is information on Configuration ROM of this unit. The unit supports some AV/C commands defined by Audio subunit specification and vendor dependent commands. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': False, 'chip_ID': 42949742248, 'cmc': False, 'cyc_clk_acc': 255, 'generation': 0, 'imc': False, 'isc': True, 'link_spd': 3, 'max_ROM': 0, 'max_rec': 64, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 122333], ['DESCRIPTOR', 'Duet'], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 122333], ['DESCRIPTOR', 'Duet']]]]} Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: firewire-motu: add missing entries to Kconfig

2018-10-12T07:25:27+00:00

MOTU Traveler and Audio Express are supported as well. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: fireface: add support for Fireface 400

2017-04-05T19:31:54+00:00

Fireface 400 is a second model of RME Fireface series, released in 2006. This commit adds support for this model. This model supports 8 analog channels, 2 S/PDIF channels and 8 ADAT channels in both of tx/rx packet. The number of ADAT channels differs depending on each mode of sampling transmission frequency. $ python2 linux-firewire-utils/src/crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04107768 bus_info_length 4, crc_length 16, crc 30568 (should be 61311) 404 31333934 bus_name "1394" 408 20009002 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 9 (1024) 40c 000a3501 company_id 000a35 | 410 1bd0862a device_id 011bd0862a | EUI-64 000a35011bd0862a root directory ----------------------------------------------------------------- 414 000485ec directory_length 4, crc 34284 418 03000a35 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 000314c4 directory_length 3, crc 5316 42c 12000a35 specifier id 430 13000002 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 000261a8 leaf_length 2, crc 25000 43c 000a3501 company_id 000a35 | 440 1bd0862a device_id 011bd0862a | EUI-64 000a35011bd0862a Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: fireface: add hwdep interface

2017-04-05T19:31:49+00:00

This commit adds hwdep interface so as the other drivers for audio and music units on IEEE 1394 have. This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: fireface: add skeleton for RME Fireface series

2017-04-05T19:31:24+00:00

This commit adds a new driver for RME Fireface series. This commit just creates/removes card instance according to IEEE 1394 bus event. More functions will be added in following commits. Three types of firmware have released by RME GmbH; for Fireface 400, for Fireface 800 and for UCX/802/UFX. It's reasonable that these models use different protocol for communication. Currently, I've investigated Fireface 400 and nothing others. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3

2017-03-28T10:34:13+00:00

MOTU 828mk3 (FireWire/Hybrid) is one of third generation in MOTU FireWire series, produced in 2008/2014. This model consists of three chips for functionality on IEEE 1394 bus: * TI TSB41AB2 (Physical layer for IEEE 1394 bus) * Xilinx Spartan-3E FPGA Family (Link layer for IEEE 1394 bus, packet processing and data block processing layer) * TI TMS320C6722 (Digital signal processing) This commit adds a support for this model, with its unique protocol as version 3. This protocol has some additional features to protocol version 2. * Support several optical interfaces. * Support a data chunk for return of reverb effect. * Have a quirk of tx packets. * Support heartbeat asynchronous transaction. In this protocol, series of transferred packets has some quirks. Below fields in CIP headers of the packets are out of IEC 61883-1: - SID (source node id): always 0x0d - DBS (data block size): always 0x04 - DBC (data block counter): always 0x00 - EOH (End of header): always 0x00 Below is an actual sample of transferred packets. quads CIP1 CIP2 520 0x0D040400 0x22FFFFFF 8 0x0D040400 0x22FFFFFF 520 0x0D040400 0x22FFFFFF 520 0x0D040400 0x22FFFFFF 8 0x0D040400 0x22FFFFFF Status of clock is configured by write transactions to 0x'ffff'f000'0b14, as well as version 2, while meanings of fields are different from the former protocols. Modes of optical interfaces are configured by write transactions to 0x'ffff'f000'0c94. Drivers can register its address to receive heatbeat transactions from the unit. 0x'ffff'f000'0b0c is for the higher part and 0x'ffff'f000'0b10 is for the lower part. Nevertheless, this feature is not useless for this driver and this commit omits it. Each data block consists of two parts in a point of the number of included data chunks. In both of 'fixed' and 'differed' parts, the number of included data blocks are a multiple of 4, thus depending on models there's some empty data chunks. For example, 828mk3 includes one pair of empty data chunks in its fixed part. When optical interface is configured to S/PDIF, 828mk3 includes one pair of empty data chunks in its differed part. To reduce consumption of CPU cycles with additional conditions/loops, this commit just exposes these empty chunks to user space as PCM channels. Additionally, 828mk3 has a non-negligible overhead to change its sampling transfer frequency. When softwares send asynchronous transaction to perform it, LED on the unit starts to blink. In a worst case, it continues blink during several seconds; e.g. 10 seconds. When stopping blinking, the unit seems to be prepared for the requested sampling transfer frequency. To wait for the preparation, this commit forces the driver to call task scheduler and applications sleeps for 4 seconds. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: firewire-motu: add support for MOTU 828mk2 as a model with protocol version 2

2017-03-28T10:34:08+00:00

MOTU 828mk2 is one of second generation in MOTU FireWire series, produced in 2003. This model consists of four chips: * TI TSB41AB2 (Physical layer for IEEE 1394 bus) * PDI 1394L40BE (Link layer for IEEE 1394 bus and packet processing layer) * ALTERA ACEX 1K EP1K30 Series FPGA (Data block processing layer) * TI TMS320VC5402 (Digital signal processing) This commit adds a support for this model, with its unique protocol as version 2. The features of this protocol are: * Support data chunks for status and control messages for both directions. * Support a pair of MIDI input/output. * Support a data chunk for mic/instrument independent of analog line in. * Support a data chunk for playback return. * Support independent data chunks for S/PDIF of both optical/coaxial interfaces. * Support independent data chunks for each of main out and phone out. Status of clock is configured by write transactions to 0x'ffff'f000'0b14. Modes of optical interfaces are configured by write transactions to 0x'ffff'f000'0c04. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai