kernel/git/stable/linux.git/sound/firewire/bebob, branch linux-5.2.y

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 345

2019-06-05T15:37:08+00:00

Based on 1 normalized pattern(s): licensed under the terms of the gnu general public license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 88 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000437.521539229@linutronix.de Signed-off-by: Greg Kroah-Hartman

ALSA: bebob: use more identical mod_alias for Saffire Pro 10 I/O against Liquid Saffire 56

2019-02-26T06:11:32+00:00

ALSA bebob driver has an entry for Focusrite Saffire Pro 10 I/O. The entry matches vendor_id in root directory and model_id in unit directory of configuration ROM for IEEE 1394 bus. On the other hand, configuration ROM of Focusrite Liquid Saffire 56 has the same vendor_id and model_id. This device is an application of TCAT Dice (TCD2220 a.k.a Dice Jr.) however ALSA bebob driver can be bound to it randomly instead of ALSA dice driver. At present, drivers in ALSA firewire stack can not handle this situation appropriately. This commit uses more identical mod_alias for Focusrite Saffire Pro 10 I/O in ALSA bebob driver. $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 042a829d bus_info_length 4, crc_length 42, crc 33437 404 31333934 bus_name "1394" 408 f0649222 irmc 1, cmc 1, isc 1, bmc 1, pmc 0, cyc_clk_acc 100, max_rec 9 (1024), max_rom 2, gen 2, spd 2 (S400) 40c 00130e01 company_id 00130e | 410 000606e0 device_id 01000606e0 | EUI-64 00130e01000606e0 root directory ----------------------------------------------------------------- 414 0009d31c directory_length 9, crc 54044 418 04000014 hardware version 41c 0c0083c0 node capabilities per IEEE 1394 420 0300130e vendor 424 81000012 --> descriptor leaf at 46c 428 17000006 model 42c 81000016 --> descriptor leaf at 484 430 130120c2 version 434 d1000002 --> unit directory at 43c 438 d4000006 --> dependent info directory at 450 unit directory at 43c ----------------------------------------------------------------- 43c 0004707c directory_length 4, crc 28796 440 1200a02d specifier id: 1394 TA 444 13010001 version: AV/C 448 17000006 model 44c 81000013 --> descriptor leaf at 498 dependent info directory at 450 ----------------------------------------------------------------- 450 000637c7 directory_length 6, crc 14279 454 120007f5 specifier id 458 13000001 version 45c 3affffc7 (immediate value) 460 3b100000 (immediate value) 464 3cffffc7 (immediate value) 468 3d600000 (immediate value) descriptor leaf at 46c ----------------------------------------------------------------- 46c 00056f3b leaf_length 5, crc 28475 470 00000000 textual descriptor 474 00000000 minimal ASCII 478 466f6375 "Focu" 47c 73726974 "srit" 480 65000000 "e" descriptor leaf at 484 ----------------------------------------------------------------- 484 0004a165 leaf_length 4, crc 41317 488 00000000 textual descriptor 48c 00000000 minimal ASCII 490 50726f31 "Pro1" 494 30494f00 "0IO" descriptor leaf at 498 ----------------------------------------------------------------- 498 0004a165 leaf_length 4, crc 41317 49c 00000000 textual descriptor 4a0 00000000 minimal ASCII 4a4 50726f31 "Pro1" 4a8 30494f00 "0IO" $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 040442e4 bus_info_length 4, crc_length 4, crc 17124 404 31333934 bus_name "1394" 408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255, max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400) 40c 00130e04 company_id 00130e | 410 018001e9 device_id 04018001e9 | EUI-64 00130e04018001e9 root directory ----------------------------------------------------------------- 414 00065612 directory_length 6, crc 22034 418 0300130e vendor 41c 8100000a --> descriptor leaf at 444 420 17000006 model 424 8100000e --> descriptor leaf at 45c 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ----------------------------------------------------------------- 430 000418a0 directory_length 4, crc 6304 434 1200130e specifier id 438 13000001 version 43c 17000006 model 440 8100000f --> descriptor leaf at 47c descriptor leaf at 444 ----------------------------------------------------------------- 444 00056f3b leaf_length 5, crc 28475 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 466f6375 "Focu" 454 73726974 "srit" 458 65000000 "e" descriptor leaf at 45c ----------------------------------------------------------------- 45c 000762c6 leaf_length 7, crc 25286 460 00000000 textual descriptor 464 00000000 minimal ASCII 468 4c495155 "LIQU" 46c 49445f53 "ID_S" 470 41464649 "AFFI" 474 52455f35 "RE_5" 478 36000000 "6" descriptor leaf at 47c ----------------------------------------------------------------- 47c 000762c6 leaf_length 7, crc 25286 480 00000000 textual descriptor 484 00000000 minimal ASCII 488 4c495155 "LIQU" 48c 49445f53 "ID_S" 490 41464649 "AFFI" 494 52455f35 "RE_5" 498 36000000 "6" Cc: # v3.16+ Fixes: 25784ec2d034 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series") Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: firewire: Remove superfluous snd_info_register() calls

2019-02-06T17:11:38+00:00

The calls of snd_info_register() are superfluous and should be avoided at the procfs creation time. They are called at the end of the whole initialization via snd_card_register(). This patch drops such superfluous calls. Reviewed-by: Takashi Sakamoto Tested-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: bebob: fix model-id of unit for Apogee Ensemble

2018-12-19T13:36:35+00:00

This commit fixes hard-coded model-id for an unit of Apogee Ensemble with a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly known as BridgeCo AG). I note that this model supports three modes in the number of data channels in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is switched by Vendor-dependent AV/C command, like: $ cd linux-firewire-utils $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs) When switching between different mode, the unit disappears from IEEE 1394 bus, then appears on the bus with different combination of stream formats. In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else up to 192.0 kHz. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': True, 'chip_ID': 21474898341, 'cmc': True, 'cyc_clk_acc': 100, 'generation': 2, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['HARDWARE_VERSION', 19], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble'], ['VERSION', 5297], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble']]], [ 'DEPENDENT_INFO', [ ['SPECIFIER_ID', 2037], ['VERSION', 1], [(58, 'IMMEDIATE'), 16777159], [(59, 'IMMEDIATE'), 1048576], [(60, 'IMMEDIATE'), 16777159], [(61, 'IMMEDIATE'), 6291456]]]]} Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: firewire: simplify cleanup process when failing to register sound card

2018-10-10T10:11:50+00:00

In former commits, .private_free callback releases resources just for data transmission. This release function can be called without the resources are actually allocated in error paths. This commit applies a small refactoring to clean up codes in error paths. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: bebob/fireworks: simplify handling of local device entry table

2018-10-10T10:11:47+00:00

In drivers of ALSA firewire stack, bebob and fireworks drivers have local device entry table. At present, critical section to operate the table is from the beginning/end of 'do_registration' call. This can be more narrow and simplify codes. This commit applies small refactoring for the above purpose. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: firewire: release reference count of firewire unit in .remove callback of bus driver

2018-10-10T10:11:41+00:00

In a previous commit, drivers in ALSA firewire stack blocks .remove callback of bus driver. This enables to release members of private data in the callback after releasing device of sound card. This commit simplifies codes to release the members. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: firewire: block .remove callback of bus driver till all of ALSA character devices are released

2018-10-10T10:11:34+00:00

At present, in .remove callback of bus driver just decrease reference count of device for ALSA card instance. This delegates release of the device to a process in which the last of ALSA character device is released. On the other hand, the other drivers such as for devices on PCIe are programmed to block .remove callback of bus driver till all of ALSA character devices are released. For consistency of behaviour for whole drivers, this probably confuses users. This commit takes drivers in ALSA firewire stack to imitate the above behaviour. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: bebob: use managed-resource to maintain data specific to M-Audio FW-1814/ProjectMix I/O

2018-10-04T05:54:05+00:00

ALSA bebob driver allocates memory object for data specific to M-Audio FW-1884/ProjectMix I/O. The object is to maintain format of isochronous packet payload for packet streaming by components for ALSA rawMIDI/PCM interfaces. The object can be released as managed-resource of 'struct snd_card.card_dev'. This commit uses managed-resource of the sound card device for this purpose. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: firewire: use managed-resource of fw unit device for private data

2018-10-04T05:54:01+00:00

At present, private data of each driver in ALSA firewire stack is allocated/freed by kernel slab allocator for corresponding unit on IEEE 1394 bus. In this case, resource-managed slab allocator is available to release memory object automatically just before releasing device structure for the unit. This idea can prevent runtime from memory leak due to programming mistakes. This commit uses the allocator for the private data. These drivers already use reference counter to maintain lifetime of device structure for the unit by a pair of fw_unit_get()/fw_unit_put(). The private data is safely released in a callback of 'struct snd_card.private_free(). Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai