kernel/git/stable/linux.git/sound/firewire, branch linux-4.17.y

ALSA: dice: fix kernel NULL pointer dereference due to invalid calculation for array index

2018-04-29T07:06:39+00:00

At a commit f91c9d7610a ('ALSA: firewire-lib: cache maximum length of payload to reduce function calls'), maximum size of payload for tx isochronous packet is cached to reduce the number of function calls. This cache was programmed to updated at a first callback of ohci1394 IR context. However, the maximum size is required to queueing packets before starting the isochronous context. As a result, the cached value is reused to queue packets in next time to starting the isochronous context. Then the cache is updated in a first callback of the isochronous context. This can cause kernel NULL pointer dereference in a below call graph: (sound/firewire/amdtp-stream.c) amdtp_stream_start() ->queue_in_packet() ->queue_packet() (drivers/firewire/core-iso.c) ->fw_iso_context_queue() ->struct fw_card_driver.queue_iso() (drivers/firewire/ohci.c) = ohci_queue_iso() ->queue_iso_packet_per_buffer() buffer->pages[page] The issued dereference occurs in a case that: - target unit supports different stream formats for sampling transmission frequency. - maximum length of payload for tx stream in a first trial is bigger than the length in a second trial. In this case, correct number of pages are allocated for DMA and the 'pages' array has enough elements, while index of the element is wrongly calculated according to the old value of length of payload in a call of 'queue_in_packet()'. Then it causes the issue. This commit fixes the critical bug. This affects all of drivers in ALSA firewire stack in Linux kernel v4.12 or later. [12665.302360] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [12665.302415] IP: ohci_queue_iso+0x47c/0x800 [firewire_ohci] [12665.302439] PGD 0 [12665.302440] P4D 0 [12665.302450] [12665.302470] Oops: 0000 [#1] SMP PTI [12665.302487] Modules linked in: ... [12665.303096] CPU: 1 PID: 12760 Comm: jackd Tainted: P OE 4.13.0-38-generic #43-Ubuntu [12665.303154] Hardware name: /DH77DF, BIOS KCH7710H.86A.0069.2012.0224.1825 02/24/2012 [12665.303215] task: ffff9ce87da2ae80 task.stack: ffffb5b8823d0000 [12665.303258] RIP: 0010:ohci_queue_iso+0x47c/0x800 [firewire_ohci] [12665.303301] RSP: 0018:ffffb5b8823d3ab8 EFLAGS: 00010086 [12665.303337] RAX: ffff9ce4f4876930 RBX: 0000000000000008 RCX: ffff9ce88a3955e0 [12665.303384] RDX: 0000000000000000 RSI: 0000000034877f00 RDI: 0000000000000000 [12665.303427] RBP: ffffb5b8823d3b68 R08: ffff9ce8ccb390a0 R09: ffff9ce877639ab0 [12665.303475] R10: 0000000000000108 R11: 0000000000000000 R12: 0000000000000003 [12665.303513] R13: 0000000000000000 R14: ffff9ce4f4876950 R15: 0000000000000000 [12665.303554] FS: 00007f2ec467f8c0(0000) GS:ffff9ce8df280000(0000) knlGS:0000000000000000 [12665.303600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12665.303633] CR2: 0000000000000030 CR3: 00000002dcf90004 CR4: 00000000000606e0 [12665.303674] Call Trace: [12665.303698] fw_iso_context_queue+0x18/0x20 [firewire_core] [12665.303735] queue_packet+0x88/0xe0 [snd_firewire_lib] [12665.303770] amdtp_stream_start+0x19b/0x270 [snd_firewire_lib] [12665.303811] start_streams+0x276/0x3c0 [snd_dice] [12665.303840] snd_dice_stream_start_duplex+0x1bf/0x480 [snd_dice] [12665.303882] ? vma_gap_callbacks_rotate+0x1e/0x30 [12665.303914] ? __rb_insert_augmented+0xab/0x240 [12665.303936] capture_prepare+0x3c/0x70 [snd_dice] [12665.303961] snd_pcm_do_prepare+0x1d/0x30 [snd_pcm] [12665.303985] snd_pcm_action_single+0x3b/0x90 [snd_pcm] [12665.304009] snd_pcm_action_nonatomic+0x68/0x70 [snd_pcm] [12665.304035] snd_pcm_prepare+0x68/0x90 [snd_pcm] [12665.304058] snd_pcm_common_ioctl1+0x4c0/0x940 [snd_pcm] [12665.304083] snd_pcm_capture_ioctl1+0x19b/0x250 [snd_pcm] [12665.304108] snd_pcm_capture_ioctl+0x27/0x40 [snd_pcm] [12665.304131] do_vfs_ioctl+0xa8/0x630 [12665.304148] ? entry_SYSCALL_64_after_hwframe+0xe9/0x139 [12665.304172] ? entry_SYSCALL_64_after_hwframe+0xe2/0x139 [12665.304195] ? entry_SYSCALL_64_after_hwframe+0xdb/0x139 [12665.304218] ? entry_SYSCALL_64_after_hwframe+0xd4/0x139 [12665.304242] ? entry_SYSCALL_64_after_hwframe+0xcd/0x139 [12665.304265] ? entry_SYSCALL_64_after_hwframe+0xc6/0x139 [12665.304288] ? entry_SYSCALL_64_after_hwframe+0xbf/0x139 [12665.304312] ? entry_SYSCALL_64_after_hwframe+0xb8/0x139 [12665.304335] ? entry_SYSCALL_64_after_hwframe+0xb1/0x139 [12665.304358] SyS_ioctl+0x79/0x90 [12665.304374] ? entry_SYSCALL_64_after_hwframe+0x72/0x139 [12665.304397] entry_SYSCALL_64_fastpath+0x24/0xab [12665.304417] RIP: 0033:0x7f2ec3750ef7 [12665.304433] RSP: 002b:00007fff99e31388 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [12665.304465] RAX: ffffffffffffffda RBX: 00007fff99e312f0 RCX: 00007f2ec3750ef7 [12665.304494] RDX: 0000000000000000 RSI: 0000000000004140 RDI: 0000000000000007 [12665.304522] RBP: 0000556ebc63fd60 R08: 0000556ebc640560 R09: 0000000000000000 [12665.304553] R10: 0000000000000001 R11: 0000000000000246 R12: 0000556ebc63fcf0 [12665.304584] R13: 0000000000000000 R14: 0000000000000007 R15: 0000000000000000 [12665.304612] Code: 01 00 00 44 89 eb 45 31 ed 45 31 db 66 41 89 1e 66 41 89 5e 0c 66 45 89 5e 0e 49 8b 49 08 49 63 d4 4d 85 c0 49 63 ff 48 8b 14 d1 <48> 8b 72 30 41 8d 14 37 41 89 56 04 48 63 d3 0f 84 ce 00 00 00 [12665.304713] RIP: ohci_queue_iso+0x47c/0x800 [firewire_ohci] RSP: ffffb5b8823d3ab8 [12665.304743] CR2: 0000000000000030 [12665.317701] ---[ end trace 9d55b056dd52a19f ]--- Fixes: f91c9d7610a ('ALSA: firewire-lib: cache maximum length of payload to reduce function calls') Cc: # v4.12+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: dice: fix error path to destroy initialized stream data

2018-04-26T13:24:54+00:00

In error path of snd_dice_stream_init_duplex(), stream data for incoming packet can be left to be initialized. This commit fixes it. Fixes: 436b5abe2224 ('ALSA: dice: handle whole available isochronous streams') Cc: # v4.6+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: dice: fix OUI for TC group

2018-04-24T11:51:35+00:00

OUI for TC Electronic is 0x000166, for TC GROUP A/S. 0x001486 is for Echo Digital Audio Corporation. Fixes: 7cafc65b3aa1 ('ALSA: dice: force to add two pcm devices for listed models') Cc: # v4.6+ Reference: http://standards-oui.ieee.org/oui/oui.txt Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

treewide: remove large struct-pass-by-value from tracepoint arguments

2018-03-28T20:55:18+00:00

- fix trace_hfi1_ctxt_info() to pass large struct by reference instead of by value - convert 'type array[]' tracepoint arguments into 'type *array', since compiler will warn that sizeof('type array[]') == sizeof('type *array') and later should be used instead The CAST_TO_U64 macro in the later patch will enforce that tracepoint arguments can only be integers, pointers, or less than 8 byte structures. Larger structures should be passed by reference. Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03+00:00

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds

sound: annotate ->poll() instances

2017-11-27T21:20:02+00:00

Signed-off-by: Al Viro

Merge branch 'linus' into locking/core, to resolve conflicts

2017-11-07T09:32:44+00:00

Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()

2017-10-25T09:01:08+00:00

Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland Signed-off-by: Paul E. McKenney Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar

ALSA: firewire: Use common error handling code in snd_motu_stream_start_duplex()

2017-09-12T07:23:26+00:00

Add a jump target so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Takashi Iwai