kernel/git/stable/linux.git/sound/soc/codecs, branch linux-3.5.y

ASoC: wm9712: Fix name of Capture Switch

2012-10-12T20:47:11+00:00

commit 689185b78ba6fbe0042f662a468b5565909dff7a upstream. Help UIs associate it with the matching gain control. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: wm_hubs: Ensure volume updates are handled during class W startup

2012-10-12T20:47:11+00:00

commit eb4d5fc1f0ce89e3d5b072c594a1e213a0e05881 upstream. In some circumstances we may need to flush volume updates to the device after switching to class W mode. Do this unconditionally to ensure that these situations are handled. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: wm2000: Correct register size

2012-10-02T17:40:02+00:00

commit d0e12f3ff3472cbd8f52d3c0e6ee07a841787c40 upstream. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: wm9712: Fix microphone source selection

2012-09-14T16:59:23+00:00

commit ccf795847a38235ee4a56a24129ce75147d6ba8f upstream. Currently the microphone input source is not selectable as while there is a DAPM widget it's not connected to anything so it won't be properly instantiated. Add something more correct for the input structure to get things going, even though it's not hooked into the rest of the routing map and so won't actually achieve anything except allowing the relevant register bits to be written. Reported-by: Christop Fritz Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: wm8994: Ensure there are enough BCLKs for four channels

2012-08-09T15:23:15+00:00

commit b8edf3e5522735c8ce78b81845f7a1a2d4a08626 upstream. Otherwise if someone tries to use all four channels on AIF1 with the device in master mode we won't be able to clock out all the data. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: wm8962: Allow VMID time to fully ramp

2012-08-09T15:23:15+00:00

commit 9d40e5582c9c4cfb6977ba2a0ca9c2ed82c56f21 upstream. Required for reliable power up from cold. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: wm8962: Redo early init of the part on resume

2012-08-09T15:22:37+00:00

commit e4dd76788c7e5b27165890d712c8c4f6f0abd645 upstream. Ensure robust startup of the part by going through the reset procedure prior to resyncing the full register cache, avoiding potential intermittent faults in some designs. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: tlv320aic3x: Fix codec pll configure bug

2012-06-29T07:18:03+00:00

In sound/soc/codecs/tlv320aic3x.c data = snd_soc_read(codec, AIC3X_PLL_PROGA_REG); snd_soc_write(codec, AIC3X_PLL_PROGA_REG, data | (pll_p << PLLP_SHIFT)); In the above code, pll-p value is OR'ed with previous value without clearing it. Bug is not seen if pll-p value doesn't change across Sampling frequency. However on some platforms (like AM335x EVM-SK), pll-p may have different values across different sampling frequencies. In such case, above code configures the pll with a wrong value. Because of this bug, when a audio stream is played with pll value different from previous stream, audio is heard as differently(like its stretched). Signed-off-by: Hebbar, Gururaja Signed-off-by: Mark Brown Cc: stable@vger.kernel.org

ASoC: wm2200: Add missing BCLK rate

2012-06-29T07:18:02+00:00

Without this very high BCLKs will be configured incorrectly. Reported-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org

ASoC: wm8994: remove duplicate code

2012-06-25T09:14:13+00:00

It seems that the code duplication was added at a merge operation. Signed-off-by: Jaroslav Kysela Signed-off-by: Takashi Iwai