kernel/git/stable/linux.git/sound/soc/codecs, branch linux-4.2.y

ASoC: tas2552: fix dBscale-min declaration

2015-10-22T21:49:21+00:00

commit e2600460bc3aa14ca1df86318a327cbbabedf9a8 upstream. The minimum volume level for the TAS2552 (control register value 0x00) is -7dB however the driver declares it as -0.07dB. Running amixer before the patch reports: dBscale-min=-0.07dB,step=1.00dB,mute=0 Running amixer with the patch applied reports: dBscale-min=-7.00dB,step=1.00dB,mute=0 Signed-off-by: Andreas Dannenberg Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: sgtl5000: fix wrong register MIC_BIAS_VOLTAGE setup on probe

2015-10-22T21:49:21+00:00

commit e256da84a04ea31c3c215997c847609af224e8f4 upstream. Signed-off-by: Gianluca Renzi Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: arizona: Poll for FLL clock OK rather than use interrupts

2015-09-21T17:10:54+00:00

commit 0e7659712836ca59b4735bc5cc94de38698a5e01 upstream. The extcon driver takes the DAPM mutex from within the interrupt thread in several places, which makes it possible to get into a situation where the interrupt thread is blocked waiting on the DAPM mutex whilst a DAPM sequence is running which is attempting to configure the FLL. In this case the FLL completion can't be completed as as the IRQ handler is ONE_SHOT, which cause the FLL lock to use the full time out (250mS) and report that the process timed out. It is not really practical to make the extcon driver not take the DAPM mutex from within the interrupt thread, at least not without extensive modification. So this patch fixes the issue by switching the wait for the FLL lock to polling. A few fast polls are done first as the FLL should lock quickly for a good quality reference clock, (indeed it hits on the first poll on my system) and it will poll every 20mS after that until it times out. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: arizona: Fix gain settings of FLL in free-run mode

2015-09-21T17:10:54+00:00

commit 1cf5a330c05ae37a0a98ac7c9800a6f50d5579ec upstream. The wrong register was used to set the gain of ref loop, when changing the FLL output on an active FLL. This patch corrects the offset of the gain register. Signed-off-by: Nikesh Oswal Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: adav80x: Remove .read_flag_mask setting from adav80x_regmap_config

2015-09-21T17:10:53+00:00

commit 9d8352864907f0ad76124c5b28f65b5a382d7d7c upstream. Don't set .read_flag_mask for adav803, it's for adav801 only. Fixes: 0c2d69645628 ("ASoC: adav80x: Split SPI and I2C code into different modules") Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: rt5645: Add struct dmi_system_id "Google Celes" for chrome platform

2015-09-21T17:10:53+00:00

commit c1713485f9fc06e1f4de9800b43f6486f2527379 upstream. Signed-off-by: Oder Chiou Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: rt5640: fix line out no sound issue

2015-09-21T17:10:53+00:00

commit 9b850ca4f1c5acd7fcbbd4b38a2d27132801a8d5 upstream. The power for line out was not turned on when line out is enabled. So we add "LOUT amp" widget to turn on the power for line out. Signed-off-by: John Lin Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

Merge remote-tracking branches 'asoc/fix/cs4265', 'asoc/fix/intel' and 'asoc/fix/topology' into asoc-linus

2015-08-06T11:39:07+00:00

Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linus

2015-08-06T11:39:07+00:00

ASoC: rt5645: Fix lost pin setting for DMIC1

2015-08-03T16:02:45+00:00

I2S2_DAC pin can be used for I2S or GPIO. We should set it as GPIO if we use GPIO5 as DMIC1 data pin. Signed-off-by: Bard Liao Signed-off-by: Mark Brown