kernel/git/stable/linux.git/sound/soc, branch linux-3.5.y

ASoC: wm9712: Fix name of Capture Switch

2012-10-12T20:47:11+00:00

commit 689185b78ba6fbe0042f662a468b5565909dff7a upstream. Help UIs associate it with the matching gain control. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: wm_hubs: Ensure volume updates are handled during class W startup

2012-10-12T20:47:11+00:00

commit eb4d5fc1f0ce89e3d5b072c594a1e213a0e05881 upstream. In some circumstances we may need to flush volume updates to the device after switching to class W mode. Do this unconditionally to ensure that these situations are handled. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: wm2000: Correct register size

2012-10-02T17:40:02+00:00

commit d0e12f3ff3472cbd8f52d3c0e6ee07a841787c40 upstream. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: samsung dma - Don't indicate support for pause/resume.

2012-10-02T17:39:11+00:00

commit 57b2d68863f281737d8596cb3d76d89d9cc54fd8 upstream. The pause and resume operations indicate that the stream can be un-paused/resumed from the exact location they were paused/suspended. This is not true for this driver, the pause and suspend triggers share the same code path with stop, they flush all pending DMA transfers. This drops all pending samples. The pause_release/resume triggers are the same as start, except that prepare won't be called beforehand, nothing will be enqueued to the DMA engine and nothing will happen (no audio). Removing the pause flag will let apps know that it isn't supported. Removing the resume flag will cause user space to call prepare and start instead of resume, so audio will continue playing when the system wakes up. Before removing the pause and resume flags, I tested this on an exynos 5250, using 'aplay -i'. Pause/un-pause leads to silence followed by a write error. Suspend/resume testing led to the same result. Removing the two flags fixes suspend/resume (since snd_pcm_prepare is called again). And leads to a proper reporting of pause not supported. Signed-off-by: Dylan Reid Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

sound: tegra_alc5632: remove HP detect GPIO inversion

2012-10-02T17:39:07+00:00

commit c921928661eda599d73a6a86e58bdd5aecfa18cb upstream. Both the schematics and practical testing show that the HP detect GPIO is high when the headphones are plugged in. Hence, the snd_soc_jack_gpio should not specify to invert the signal. Signed-off-by: Stephen Warren Acked-by: Andrey Danin Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: omap-mcbsp: Fix 6pin mux configuration

2012-09-14T16:59:23+00:00

commit d0db84e713eaaccea2a435e1625fb3150b335f4a upstream. The check for the mux_signal callback was wrong which prevents us to configure the 6pin port's FSR/CLKR signal mux. Reported-by: CF Adad Signed-off-by: Peter Ujfalusi Acked-by: Jarkko Nikula Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: wm9712: Fix microphone source selection

2012-09-14T16:59:23+00:00

commit ccf795847a38235ee4a56a24129ce75147d6ba8f upstream. Currently the microphone input source is not selectable as while there is a DAPM widget it's not connected to anything so it won't be properly instantiated. Add something more correct for the input structure to get things going, even though it's not hooked into the rest of the routing map and so won't actually achieve anything except allowing the relevant register bits to be written. Reported-by: Christop Fritz Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: wm8994: Ensure there are enough BCLKs for four channels

2012-08-09T15:23:15+00:00

commit b8edf3e5522735c8ce78b81845f7a1a2d4a08626 upstream. Otherwise if someone tries to use all four channels on AIF1 with the device in master mode we won't be able to clock out all the data. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: wm8962: Allow VMID time to fully ramp

2012-08-09T15:23:15+00:00

commit 9d40e5582c9c4cfb6977ba2a0ca9c2ed82c56f21 upstream. Required for reliable power up from cold. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: wm8962: Redo early init of the part on resume

2012-08-09T15:22:37+00:00

commit e4dd76788c7e5b27165890d712c8c4f6f0abd645 upstream. Ensure robust startup of the part by going through the reset procedure prior to resyncing the full register cache, avoiding potential intermittent faults in some designs. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman