kernel/git/stable/linux.git/sound/usb, branch linux-3.4.y

ALSA: usb-audio: work around CH345 input SysEx corruption

2016-10-26T15:15:31+00:00

commit a91e627e3f0ed820b11d86cdc04df38f65f33a70 upstream. One of the many faults of the QinHeng CH345 USB MIDI interface chip is that it does not handle received SysEx messages correctly -- every second event packet has a wrong code index number, which is the one from the last seen message, instead of 4. For example, the two messages "FE F0 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E F7" result in the following event packets: correct: CH345: 0F FE 00 00 0F FE 00 00 04 F0 01 02 04 F0 01 02 04 03 04 05 0F 03 04 05 04 06 07 08 04 06 07 08 04 09 0A 0B 0F 09 0A 0B 04 0C 0D 0E 04 0C 0D 0E 05 F7 00 00 05 F7 00 00 A class-compliant driver must interpret an event packet with CIN 15 as having a single data byte, so the other two bytes would be ignored. The message received by the host would then be missing two bytes out of six; in this example, "F0 01 02 03 06 07 08 09 0C 0D 0E F7". These corrupted SysEx event packages contain only data bytes, while the CH345 uses event packets with a correct CIN value only for messages with a status byte, so it is possible to distinguish between these two cases by checking for the presence of this status byte. (Other bugs in the CH345's input handling, such as the corruption resulting from running status, cannot be worked around.) Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai Signed-off-by: Zefan Li

ALSA: usb-audio: prevent CH345 multiport output SysEx corruption

2016-10-26T15:15:31+00:00

commit 1ca8b201309d842642f221db7f02f71c0af5be2d upstream. The CH345 USB MIDI chip has two output ports. However, they are multiplexed through one pin, and the number of ports cannot be reduced even for hardware that implements only one connector, so for those devices, data sent to either port ends up on the same hardware output. This becomes a problem when both ports are used at the same time, as longer MIDI commands (such as SysEx messages) are likely to be interrupted by messages from the other port, and thus to get lost. It would not be possible for the driver to detect how many ports the device actually has, except that in practice, _all_ devices built with the CH345 have only one port. So we can just ignore the device's descriptors, and hardcode one output port. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai Signed-off-by: Zefan Li

ALSA: usb-audio: add packet size quirk for the Medeli DD305

2016-10-26T15:15:31+00:00

commit 98d362becb6621bebdda7ed0eac7ad7ec6c37898 upstream. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai Signed-off-by: Zefan Li

ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly

2016-03-21T01:17:58+00:00

commit 42e3121d90f42e57f6dbd6083dff2f57b3ec7daa upstream. AudioQuest DragonFly DAC reports a volume control range of 0..50 (0x0000..0x0032) which in USB Audio means a range of 0 .. 0.2dB, which is obviously incorrect and would cause software using the dB information in e.g. volume sliders to have a massive volume difference in 100..102% range. Commit 2d1cb7f658fb ("ALSA: usb-audio: add dB range mapping for some devices") added a dB range mapping for it with range 0..50 dB. However, the actual volume mapping seems to be neither linear volume nor linear dB scale, but instead quite close to the cubic mapping e.g. alsamixer uses, with a range of approx. -53...0 dB. Replace the previous quirk with a custom dB mapping based on some basic output measurements, using a 10-item range TLV (which will still fit in alsa-lib MAX_TLV_RANGE_SIZE). Tested on AudioQuest DragonFly HW v1.2. The quirk is only applied if the range is 0..50, so if this gets fixed/changed in later HW revisions it will no longer be applied. v2: incorporated Takashi Iwai's suggestion for the quirk application method Signed-off-by: Anssi Hannula Signed-off-by: Takashi Iwai [lizf: Backoported to 3.4: use dev_info() instead of usb_audio_info()] Signed-off-by: Zefan Li

ALSA: usb-audio: add dB range mapping for some devices

2016-03-21T01:17:49+00:00

commit 2d1cb7f658fb9c3ba8f9dab8aca297d4dfdec835 upstream. Add the correct dB ranges of Bose Companion 5 and Drangonfly DAC 1.2. Signed-off-by: Yao-Wen Mao Signed-off-by: Takashi Iwai Signed-off-by: Zefan Li

ALSA: usb-audio: Add MIDI support for Steinberg MI2/MI4

2016-03-21T01:17:41+00:00

commit 0689a86ae814f39af94a9736a0a5426dd82eb107 upstream. The Steinberg MI2 and MI4 interfaces are compatible with the USB class audio spec, but the MIDI part of the devices is reported as a vendor specific interface. This patch adds entries to quirks-table.h to recognize the MIDI endpoints. Audio functionality was already working and is unaffected by this change. Signed-off-by: Dominic Sacré Signed-off-by: Albert Huitsing Acked-by: Clemens Ladisch Signed-off-by: Takashi Iwai Signed-off-by: Zefan Li

ALSA: usb-audio: add MAYA44 USB+ mixer control names

2015-09-18T01:20:44+00:00

commit 044bddb9ca8d49edb91bc22b9940a463b0dbb97f upstream. Add mixer control names for the ESI Maya44 USB+ (which appears to be identical width the AudioTrak Maya44 USB). Reported-by: nightmixes Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai Signed-off-by: Zefan Li

ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support

2015-06-19T03:40:31+00:00

commit 3dc8523fa7412e731441c01fb33f003eb3cfece1 upstream. Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3237" Signed-off-by: Dmitry M. Fedin Signed-off-by: Takashi Iwai Signed-off-by: Zefan Li

ALSA: snd-usb: add quirks for Roland UA-22

2015-06-19T03:40:24+00:00

commit fcdcd1dec6d2c7b718385ec743ae5a9a233edad4 upstream. The device complies to the UAC1 standard but hides that fact with proprietary descriptors. The autodetect quirk for Roland devices catches the audio interface but misses the MIDI part, so a specific quirk is needed. Signed-off-by: Daniel Mack Reported-by: Rafa Lafuente Tested-by: Raphaël Doursenaud Signed-off-by: Takashi Iwai [lizf: Backported to 3.4: adjust context] Signed-off-by: Zefan Li

ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210

2015-04-14T09:33:54+00:00

commit 6455931186bff407493135e74c5f32efd30860e2 upstream. Signed-off-by: Jason Lee Cragg Signed-off-by: Takashi Iwai Signed-off-by: Zefan Li