kernel/git/stable/linux.git/sound/usb, branch linux-4.0.y

ALSA: usb-audio: add native DSD support for JLsounds I2SoverUSB

2015-06-23T00:03:27+00:00

commit 3b7e5c7e36ed4a046bbea6d36c9be9d1d6107ae0 upstream. This patch adds native DSD support for the XMOS based JLsounds I2SoverUSB board Signed-off-by: Jurgen Kramer Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: fix missing input volume controls in MAYA44 USB(+)

2015-06-23T00:03:27+00:00

commit ea114fc27dc0cb9a550b6add5426720feb66262a upstream. The driver worked around an error in the MAYA44 USB(+)'s mixer unit descriptor by aborting before parsing the missing field. However, aborting parsing too early prevented parsing of the other units connected to this unit, so the capture mixer controls would be missing. Fix this by moving the check for this descriptor error after the parsing of the unit's input pins. Reported-by: nightmixes Tested-by: nightmixes Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: add MAYA44 USB+ mixer control names

2015-06-23T00:03:27+00:00

commit 044bddb9ca8d49edb91bc22b9940a463b0dbb97f upstream. Add mixer control names for the ESI Maya44 USB+ (which appears to be identical width the AudioTrak Maya44 USB). Reported-by: nightmixes Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: don't try to get Outlaw RR2150 sample rate

2015-06-23T00:03:26+00:00

commit 2f80b2958abe5658000d5ad9b45a36ecf879666e upstream. This quirk allows us to avoid the noisy: current rate 0 is different from the runtime rate message every time playback starts. While USB DAC in the RR2150 supports reading the sample rate, it never returns a sample rate other than zero in my observation with common sample rates. Signed-off-by: Eric Wong Cc: Joe Turner Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion

2015-06-23T00:03:26+00:00

commit 1ef9f0583514508bc93427106ceef3215e4eb1a5 upstream. Fix this from the logs: usb 7-1: New USB device found, idVendor=046d, idProduct=08ca ... usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 Signed-off-by: Wolfram Sang Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Add quirk for MS LifeCam HD-3000

2015-06-06T15:20:57+00:00

commit ae425bb2a05bebe786a25cc8ae64e9d16c4d9b83 upstream. Microsoft LifeCam HD-3000 (045e:0779) needs a similar quirk for suppressing the unsupported sample rate inquiry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481 Signed-off-by: Vittorio Gambaletta Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Add quirk for MS LifeCam Studio

2015-06-06T15:20:57+00:00

commit fa94b0d72511add5822dc4124f2a3eae66b8863f upstream. Microsoft LifeCam Studio (045e:0772) needs a similar quirk for suppressing the wrong sample rate inquiry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481 Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Don't attempt to get Microsoft Lifecam Cinema sample rate

2015-05-06T20:03:48+00:00

commit eef0342cf32689f77d78ee3302999e5caaa6a8f3 upstream. Adds Microsoft LifeCam Cinema USB ID to the snd_usb_get_sample_rate_quirk list as the Lifecam Cinema does not appear to support getting the sample rate. Fixes the issue where the LifeCam Cinema would wait for USB timeout and log the message "cannot get freq at ep 0x82" when accessed. Addresses bug report https://bugzilla.kernel.org/show_bug.cgi?id=95961. Signed-off-by: Adam Honse Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support

2015-04-09T15:20:39+00:00

Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3237" Signed-off-by: Dmitry M. Fedin Cc: Signed-off-by: Takashi Iwai

ALSA: usb-audio: don't try to get Benchmark DAC1 sample rate

2015-04-04T12:07:56+00:00

Adding this quirk allows us to avoid the noisy "cannot get freq at ep 0x1" message in dmesg output every time playback starts. This ought to affect other Benchmark DAC1 variations using the same "Microchip Technology, Inc." chip as well, but I have only tested with the "Pre" variant. Signed-off-by: Eric Wong Cc: Joe Turner Signed-off-by: Takashi Iwai