kernel/git/stable/linux.git/sound, branch linux-4.20.y

ALSA: hda/realtek: Enable headset MIC of Acer TravelMate X514-51T with ALC255

2019-03-19T12:11:56+00:00

commit cbc05fd6708c1744ee6a61cb4c461ff956d30524 upstream. The Acer TravelMate X514-51T with ALC255 cannot detect the headset MIC until ALC255_FIXUP_ACER_HEADSET_MIC quirk applied. Although, the internal DMIC uses another module - snd_soc_skl as the driver. We still need the NID 0x1a in the quirk to enable the headset MIC. Signed-off-by: Jian-Hong Pan Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: hda/realtek - Reduce click noise on Dell Precision 5820 headphone

2019-03-19T12:11:56+00:00

commit c0ca5eced22215c1e03e3ad479f8fab0bbb30772 upstream. Dell Precision 5820 with ALC3234 codec (which is equivalent with ALC255) shows click noises at (runtime) PM resume on the headphone. The biggest source of the noise comes from the cleared headphone pin control at resume, which is done via the standard shutup procedure. Although we have an override of the standard shutup callback to replace with NOP, this would skip other needed stuff (e.g. the pull down of headset power). So, instead, this "fixes" the behavior of alc_fixup_no_shutup() by introducing spec->no_shutup_pins flag. When this flag is set, Realtek codec won't call the standard snd_hda_shutup_pins() & co. Now alc_fixup_no_shutup() just sets this flag instead of overriding spec->shutup callback itself. This allows us to apply the similar fix for other entries easily if needed in future. Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: hda/realtek: Enable audio jacks of ASUS UX362FA with ALC294

2019-03-19T12:11:56+00:00

commit 8bb37a2a4d7c02affef554f5dc05f6d2e39c31f9 upstream. The ASUS UX362FA with ALC294 cannot detect the headset MIC and outputs through the internal speaker and the headphone. This issue can be fixed by the quirk in the commit 4e0511067 ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294. Besides, ASUS UX362FA and UX533FD have the same audio initial pin config values. So, this patch replaces SND_PCI_QUIRK of UX533FD with a new SND_HDA_PIN_QUIRK which benefits both UX362FA and UX533FD. Fixes: 4e051106730d ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294") Signed-off-by: Jian-Hong Pan Signed-off-by: Ming Shuo Chiu Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: hda - add more quirks for HP Z2 G4 and HP Z240

2019-03-19T12:11:56+00:00

commit 167897f4b32c2bc18b3b6183029a33fb420a114e upstream. Apply the HP_MIC_NO_PRESENCE fixups for the more HP Z2 G4 and HP Z240 models. Reported-by: Jeff Burrell Signed-off-by: Jaroslav Kysela Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: hda: Extend i915 component bind timeout

2019-03-19T12:11:56+00:00

commit cfc35f9c128cea8fce6a5513b1de50d36f3b209f upstream. I set 10 seconds for the timeout of the i915 audio component binding with a hope that recent machines are fast enough to handle all probe tasks in that period, but I was too optimistic. The binding may take longer than that, and this caused a problem on the machine with both audio and graphics driver modules loaded in parallel, as Paul Menzel experienced. This problem haven't hit so often just because the KMS driver is loaded in initrd on most machines. As a simple workaround, extend the timeout to 60 seconds. Fixes: f9b54e1961c7 ("ALSA: hda/i915: Allow delayed i915 audio component binding") Reported-by: Paul Menzel Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: firewire-motu: fix construction of PCM frame for capture direction

2019-03-19T12:11:55+00:00

commit f97a0944a72b26a2bece72516294e112a890f98a upstream. In data blocks of common isochronous packet for MOTU devices, PCM frames are multiplexed in a shape of '24 bit * 4 Audio Pack', described in IEC 61883-6. The frames are not aligned to quadlet. For capture PCM substream, ALSA firewire-motu driver constructs PCM frames by reading data blocks byte-by-byte. However this operation includes bug for lower byte of the PCM sample. This brings invalid content of the PCM samples. This commit fixes the bug. Reported-by: Peter Sjöberg Cc: # v4.12+ Fixes: 4641c9394010 ("ALSA: firewire-motu: add MOTU specific protocol layer") Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: bebob: use more identical mod_alias for Saffire Pro 10 I/O against Liquid Saffire 56

2019-03-19T12:11:55+00:00

commit 7dc661bd8d3261053b69e4e2d0050cd1ee540fc1 upstream. ALSA bebob driver has an entry for Focusrite Saffire Pro 10 I/O. The entry matches vendor_id in root directory and model_id in unit directory of configuration ROM for IEEE 1394 bus. On the other hand, configuration ROM of Focusrite Liquid Saffire 56 has the same vendor_id and model_id. This device is an application of TCAT Dice (TCD2220 a.k.a Dice Jr.) however ALSA bebob driver can be bound to it randomly instead of ALSA dice driver. At present, drivers in ALSA firewire stack can not handle this situation appropriately. This commit uses more identical mod_alias for Focusrite Saffire Pro 10 I/O in ALSA bebob driver. $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 042a829d bus_info_length 4, crc_length 42, crc 33437 404 31333934 bus_name "1394" 408 f0649222 irmc 1, cmc 1, isc 1, bmc 1, pmc 0, cyc_clk_acc 100, max_rec 9 (1024), max_rom 2, gen 2, spd 2 (S400) 40c 00130e01 company_id 00130e | 410 000606e0 device_id 01000606e0 | EUI-64 00130e01000606e0 root directory ----------------------------------------------------------------- 414 0009d31c directory_length 9, crc 54044 418 04000014 hardware version 41c 0c0083c0 node capabilities per IEEE 1394 420 0300130e vendor 424 81000012 --> descriptor leaf at 46c 428 17000006 model 42c 81000016 --> descriptor leaf at 484 430 130120c2 version 434 d1000002 --> unit directory at 43c 438 d4000006 --> dependent info directory at 450 unit directory at 43c ----------------------------------------------------------------- 43c 0004707c directory_length 4, crc 28796 440 1200a02d specifier id: 1394 TA 444 13010001 version: AV/C 448 17000006 model 44c 81000013 --> descriptor leaf at 498 dependent info directory at 450 ----------------------------------------------------------------- 450 000637c7 directory_length 6, crc 14279 454 120007f5 specifier id 458 13000001 version 45c 3affffc7 (immediate value) 460 3b100000 (immediate value) 464 3cffffc7 (immediate value) 468 3d600000 (immediate value) descriptor leaf at 46c ----------------------------------------------------------------- 46c 00056f3b leaf_length 5, crc 28475 470 00000000 textual descriptor 474 00000000 minimal ASCII 478 466f6375 "Focu" 47c 73726974 "srit" 480 65000000 "e" descriptor leaf at 484 ----------------------------------------------------------------- 484 0004a165 leaf_length 4, crc 41317 488 00000000 textual descriptor 48c 00000000 minimal ASCII 490 50726f31 "Pro1" 494 30494f00 "0IO" descriptor leaf at 498 ----------------------------------------------------------------- 498 0004a165 leaf_length 4, crc 41317 49c 00000000 textual descriptor 4a0 00000000 minimal ASCII 4a4 50726f31 "Pro1" 4a8 30494f00 "0IO" $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 040442e4 bus_info_length 4, crc_length 4, crc 17124 404 31333934 bus_name "1394" 408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255, max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400) 40c 00130e04 company_id 00130e | 410 018001e9 device_id 04018001e9 | EUI-64 00130e04018001e9 root directory ----------------------------------------------------------------- 414 00065612 directory_length 6, crc 22034 418 0300130e vendor 41c 8100000a --> descriptor leaf at 444 420 17000006 model 424 8100000e --> descriptor leaf at 45c 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ----------------------------------------------------------------- 430 000418a0 directory_length 4, crc 6304 434 1200130e specifier id 438 13000001 version 43c 17000006 model 440 8100000f --> descriptor leaf at 47c descriptor leaf at 444 ----------------------------------------------------------------- 444 00056f3b leaf_length 5, crc 28475 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 466f6375 "Focu" 454 73726974 "srit" 458 65000000 "e" descriptor leaf at 45c ----------------------------------------------------------------- 45c 000762c6 leaf_length 7, crc 25286 460 00000000 textual descriptor 464 00000000 minimal ASCII 468 4c495155 "LIQU" 46c 49445f53 "ID_S" 470 41464649 "AFFI" 474 52455f35 "RE_5" 478 36000000 "6" descriptor leaf at 47c ----------------------------------------------------------------- 47c 000762c6 leaf_length 7, crc 25286 480 00000000 textual descriptor 484 00000000 minimal ASCII 488 4c495155 "LIQU" 48c 49445f53 "ID_S" 490 41464649 "AFFI" 494 52455f35 "RE_5" 498 36000000 "6" Cc: # v3.16+ Fixes: 25784ec2d034 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series") Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ASoC: imx-audmux: change snprintf to scnprintf for possible overflow

2019-03-05T16:59:37+00:00

[ Upstream commit c407cd008fd039320d147088b52d0fa34ed3ddcb ] Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by: Silvio Cesare Cc: Timur Tabi Cc: Nicolin Chen Cc: Mark Brown Cc: Xiubo Li Cc: Fabio Estevam Cc: Dan Carpenter Cc: Kees Cook Cc: Will Deacon Cc: Greg KH Signed-off-by: Willy Tarreau Acked-by: Nicolin Chen Reviewed-by: Kees Cook Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: dapm: change snprintf to scnprintf for possible overflow

2019-03-05T16:59:37+00:00

[ Upstream commit e581e151e965bf1f2815dd94620b638fec4d0a7e ] Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by: Silvio Cesare Cc: Liam Girdwood Cc: Mark Brown Cc: Dan Carpenter Cc: Kees Cook Cc: Will Deacon Cc: Greg KH Signed-off-by: Willy Tarreau Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: rt5682: Fix PLL source register definitions

2019-03-05T16:59:37+00:00

[ Upstream commit ee7ea2a9a318a89d21b156dc75e54d53904bdbe5 ] Fix typo which causes headphone no sound while using BCLK as PLL source. Signed-off-by: Shuming Fan Signed-off-by: Mark Brown Signed-off-by: Sasha Levin