| Age | Commit message (Collapse) | Author |
|---|
|
On AHB platforms, firmware operates in two modes: fixed-memory mode where
firmware uses hardcoded addresses for memory regions such as BDF and does
not request HOST_DDR memory from the host, and dynamic-memory mode where
firmware expects the host to provide memory addresses including HOST_DDR
after the Q6 read-only region and relies on host allocation for all memory
types.
Introduce QMI capability negotiation to support both modes. Add a new QMI
PHY capability flag dynamic_ddr_support which is advertised by firmware to
indicate it supports dynamic memory mode. When the host detects this
capability, set the dynamic_mem_support flag in the host capability message
to signal the host is ready to provide dynamic memory allocation. This
triggers firmware to send the HOST_DDR memory request and use the
host-provided address.
For backward compatibility, if firmware doesn't advertise
dynamic_ddr_support, the firmware continues to operate in fixed-memory mode
where firmware uses predefined addresses.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Link: https://patch.msgid.link/20260701041611.3077185-1-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
QCC2072's rx_mpdu_start TLV has a different field layout from QCN9274.
Reusing struct rx_mpdu_start_qcn9274 in hal_rx_desc_qcc2072 causes the
RX datapath to read the wrong offsets for info2, info4, pn[] and
phy_ppdu_id, producing corrupted sequence number, PN, ppdu_id and
mpdu-info flags (encrypted, fragment, addr2/addr4 valid).
Add a dedicated struct rx_mpdu_start_qcc2072 that matches the actual
hardware descriptor layout, and use it in hal_rx_desc_qcc2072.
Tested-on: QCC2072 hw1.0 PCI WLAN.COL.1.0.c2-00188-QCACOLSWPL_V1_TO_SILICONZ-1
Fixes: 28badc78142e ("wifi: ath12k: add HAL descriptor and ops for QCC2072")
Signed-off-by: Wei Zhang <wei.zhang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260629061529.1993932-1-wei.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently when RX traffic is low or intermittent, the RX SRNG interrupt
mitigation logic defers packet processing for up to 500us via
HAL_SRNG_INT_TIMER_THRESHOLD_RX.
This causes excessive RX servicing delay, leading to increased end-to-end
latency and degraded TCP performance in low-concurrency scenarios.
In single-client single-stream TCP tests using 5G EHT160 (NSS 2x2) mode,
throughput drops to ~400 Mbps DL and UL instead of the expected ~600 Mbps.
In addition, UDP UL end-to-end latency measured in 5G VHT80 (NSS 4x4) mode
increases by up to ~48% (~570us versus ~270us) across frame sizes from
76 to 1518 bytes in uplink and bidirectional traffic, indicating delayed
RX servicing under sparse traffic conditions.
To address this issue, reduce the RX SRNG interrupt timer threshold from
500us to 200us so that received packets are serviced more promptly under
low-rate and intermittent RX traffic.
With this change, single-client single-stream TCP throughput in EHT160 is
restored to expected levels ~600 Mbps TCP DL/UL and UDP UL end-to-end
latency in VHT80 returns to baseline values ~270us across all tested frame
sizes. Under high RX load, no throughput regression is observed, as RX
rings are already serviced frequently. The primary implication is a modest
increase in RX interrupt frequency under low traffic, with no observed
functional, stability, or performance regressions on tested platforms.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01181-QCAHKSWPL_SILICONZ-1
Signed-off-by: Thiraviyam Mariyappan <thiraviyam.mariyappan@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260622062324.758533-1-thiraviyam.mariyappan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Commit e47d6c9bb416 ("wifi: ath12k: Advertise multicast Ethernet
encapsulation offload support") introduced a few style issues.
ath12k-check reports:
drivers/net/wireless/ath/ath12k/wifi7/hw.c:1042: line length of 92 exceeds 90 columns
And automated review did not like one if/else that did not use braces
for a single statement that also included a block comment.
Fix these issues.
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260711-ath12k_wifi7_mac_op_tx-line-length-v1-1-10e4899b98ef@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ath12k_peer_mlo_link_peers_delete() sends WMI peer_delete for every
link before waiting for any peer_unmap / peer_delete_resp event. The
shared per-radio completion ar->peer_delete_done could not
disambiguate which peer a response was for: every call to
ath12k_peer_delete_send() did
reinit_completion(&ar->peer_delete_done), so when an event for the
first link arrived between two sends it raised the count to 1 and
the second send promptly cleared it; the wait for the second link
then timed out with
Timeout in receiving peer delete response
Replace the shared completion with a per-radio waiter list, with
each pending ath12k_peer_delete() caller queueing an
ath12k_peer_delete_wait carrying its (vdev_id, addr) and a private
struct completion. ath12k_peer_delete_resp_event() matches the
response against the list under ar->data_lock and signals the
matching waiter.
Also correct the endian conversion in ath12k_peer_delete_resp_event()
logging, and add the missing \n in some logging.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
Fixes: 8e6f8bc28603 ("wifi: ath12k: Add MLO station state change handling")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260629-ath12k-mlo-peer-delete-race-v2-2-362b25590d19@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ath12k_mac_vdev_create() for an AP vdev creates the bss self-peer via
ath12k_peer_create(), which finishes by calling
ath12k_dp_link_peer_assign() to publish the dp_link_peer in the
dp_hw->dp_peers[peerid_index] RCU table, in the dp_peer's
link_peers[] array, and in the per-addr rhashtable.
If a step after ath12k_peer_create() fails the function jumps to
err_peer_del, which open-codes a WMI peer_delete and waits for the
unmap / delete_resp events. The wait_for_peer_delete_done() path
relies on ath12k_dp_link_peer_unmap_event() freeing the dp_link_peer
when the unmap arrives, but err_peer_del never calls
ath12k_dp_link_peer_unassign() first. The published references in
the dp_hw RCU table, dp_peer->link_peers[] and the rhashtable are
left pointing at the dp_link_peer that unmap_event then frees,
producing dangling pointers and use-after-free on subsequent
lookups.
Replace the open-coded sequence with a call to ath12k_peer_delete(),
which already does ath12k_dp_link_peer_unassign() before sending the
WMI command. This drops the published references before the
dp_link_peer is freed, in the same order as the normal teardown path
in ath12k_mac_remove_link_interface().
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
Fixes: 5525f12fa671 ("wifi: ath12k: Attach and detach ath12k_dp_link_peer to ath12k_dp_peer")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260629-ath12k-mlo-peer-delete-race-v2-1-362b25590d19@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Switch ath12k client driver over to generic PAS TZ APIs. Generic PAS TZ
service allows to support multiple TZ implementation backends like QTEE
based SCM PAS service, OP-TEE based PAS service and any further future TZ
backend service.
Acked-by: Jeff Johnson <jjohnson@kernel.org>
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260702115835.167602-13-sumit.garg@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Correct a minor grammatical error inside the kernel-doc comments
of error-dump.h where "configuration" was misspelled as "configuraiton".
Signed-off-by: Praveen Rajendran <praveenrajendran2009@gmail.com>
Link: https://patch.msgid.link/20260703140757.3372-1-praveenrajendran2009@gmail.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Replace "similiar" with "similar" in
Documentation/ABI/testing/sysfs-bus-pci.
Signed-off-by: D'Orus Tsitera <dorustsitera@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260713-docs-fix-similiar-v1-1-257e25150346@gmail.com
|
|
If iwl_txq_gen2_build_tfd fails, we return -1, which will cause calling
code to dispose of the skb one way or another. Remove any reference to
that skb from the txq entries so that nothing will try to access it
later.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20260214190509.2098565-1-greearb@candelatech.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
D3 resume notification handlers read firmware notification fields
before validating that the payload contains the complete fixed structure.
This causes buffer underread on malformed or truncated notifications.
Move payload length validation to occur before any field access in:
- iwl_mvm_parse_wowlan_info_notif: validate before reading num_mlo_link_keys
- iwl_mvm_wait_d3_notif D3_END handler: validate before reading flags
Assisted-by: GitHub Copilot <copilot@github.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.762193753434.I148991b8136cc5042fa08b5faf7b57d38aa2fb47@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
When iwl_pcie_tx_init() fails after RX init, nic init unwinds via
iwl_pcie_rx_free().
The freed RX members stayed non-NULL on the live transport object,
so later teardown or retry could touch stale RX state.
Set rx_pool, global_table, rxq, and alloc_page to NULL after free
to make repeated cleanup and retry paths safe.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.33e8978d8b36.Ibaedd4b0ce01405b940de7b90223b6d2c5136ffd@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Scheduled scan built the probe request before iwl_mvm_scan_fits(),
so oversized IEs could be copied into the fixed preq buffer before
length validation. Move iwl_mvm_build_scan_probe() after the fits
check.
Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len()
so userspace limits account for driver-inserted DS/TPC bytes.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260714141909.53d2722c79e7.Iebb922efa6173c92f14cd8aa8b4e7f372c0a0fb7@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
iwl_mld_thermal_zone_register() stores the thermal zone pointer in
mld->tzone before calling thermal_zone_device_enable(). If enable
fails, the code unregisters the zone but leaves mld->tzone stale,
so iwl_mld_thermal_zone_unregister() can unregister it again.
Clear mld->tzone after unregister in the error path.
While at it remove a pointless if in iwl_mld_thermal_zone_unregister
after we've alredy checked the tzone pointer is not NULL.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.595dcb8cb7fe.I8125e4a2eeb0390798e3f4074c62c00443eda8e8@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Check the mac_id before accessing the vif_id_to_mac array.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.547ea470e686.I931445ae6f37bf0e1ef6f112c811712fc48af9c9@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
BA_WINDOW_STATUS_NOTIFICATION_ID extracts a 5-bit sta_id from the
firmware notification and uses it to index fw_id_to_mac_id[] without
bounds checking. Validate sta_id before array access to prevent
out-of-bounds indexing.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.2e97f337f3cb.Ic3f0f404082ccdea13809a3c0b70e0f5417e1037@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
TLC_MNG_UPDATE_NOTIF uses firmware-provided sta_id to index
fw_id_to_link_sta[] and fw_id_to_mac_id[]. Validate sta_id
before array access to avoid out-of-bounds indexing.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.1ce54794c1f8.I275fd4c1165bf42fb17516c550dd8813a2b8286e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
MCC response parsing read n_channels from v8/v4/v3 response variants
before ensuring the payload contained the fixed response header.
Add a minimum payload-length check for each response version before
reading n_channels, and keep the existing exact-size validation for the
channels array payload.
Assisted-by: GitHub Copilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.cb2cef3d3e7e.Iee7b48614289da576de842157ad3730b7589a4b1@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The beacon TX notification can arrive in different layouts, and fields
must be read only after selecting the expected format.
Parse gp2 and TSF from the matching notification structure in each
branch, and keep using the parsed gp2 for CSA countdown and debug output.
Drop the obsolete cached gp2 field.
Assisted-by: GitHub Copilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.cc8aa937f8e5.I921f8dadcb20cb73e8283e1b8546e1778205411f@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Reject BAIDs >= IWL_MAX_BAID before indexing fw_id_to_ba.
This prevents out-of-bounds access on malformed notifications.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.07ea823b8eea.Ica915fa0cce0427bf5e3420ae933f57118fedf86@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Fix a harmless mistake in the wake packet management code in the d3
wakeup flow. If the FCS is truncated, we want to detect it, but we
cleared the icvlen before updating the truncated variable that holds the
number of bytes having been truncated.
Fix that.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.369588f93c6b.I1a4d13f276c7e75514ab2032ae387873337470b8@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
In order to compure the size of the iwl_mcc_update_resp which has a
variable length, we need to know the number of channels.
In order to read the number of channels, we must first check the
payload is long enough to read at least that.
Add this check.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.c2f644919011.Ic579e9935b92a674c96ccc44713140b5b4bc5d10@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Before looking at the 11th byte, check the length is big enough.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.336b527e3fc6.I6fe839f4e70d673632fd7ca757e81827af87b029@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Before looking at the 11th byte, check the length is big enough.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260714141909.d22bf52a18d0.If0ef6612a67cca671428b06dbdeec68549e50ae6@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The scan id reported by firmware in scan complete notification is
used as an index to the scan status array. Verify the reported id
does not exceed the array size.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Link: https://patch.msgid.link/20260714141909.fdf31f494f1c.I70d01ed2023f6584fb23ea8ab344a93d222cc4c0@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
hfs_mdb_commit() and hfs_mdb_close() keep the MDB and alternate-MDB
buffer heads (mdb_bh, alt_mdb_bh) pinned for the lifetime of the
mount and write into them in place. If a write against the backing
device fails, the block layer clears BH_Uptodate on the buffer
(end_buffer_write_sync(), fs/buffer.c) to mark its contents as no
longer trustworthy.
!buffer_uptodate(bh)
WARNING: fs/buffer.c:1093 at mark_buffer_dirty+0x299/0x410 fs/buffer.c:1093, CPU#0: syz.1.1033/6784
Modules linked in:
CPU: 0 UID: 0 PID: 6784 Comm: syz.1.1033 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:mark_buffer_dirty+0x299/0x410 fs/buffer.c:1093
Code: 4c 89 f7 e8 f9 0d d9 ff 49 8b 3e be 40 00 00 00 5b 41 5c 41 5e 41 5f 5d e9 d4 5e fb ff e8 af e7 69 ff eb 8c e8 a8 e7 69 ff 90 <0f> 0b 90 e9 a5 fd ff ff e8 9a e7 69 ff 90 0f 0b 90 e9 cf fd ff ff
RSP: 0018:ffffc90005d379a8 EFLAGS: 00010293
RAX: ffffffff825c9ae8 RBX: ffff8880123aa700 RCX: ffff888034a30000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002
RBP: 1ffff1100a45f401 R08: ffff8880123aa707 R09: 1ffff110024754e0
R10: dffffc0000000000 R11: ffffed10024754e1 R12: dffffc0000000000
R13: ffff8880522fa668 R14: ffff888045ba945b R15: ffff888045ba9400
FS: 000055556b366500(0000) GS:ffff88808c54e000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31a63fff CR3: 0000000034b1d000 CR4: 0000000000352ef0
Call Trace:
<TASK>
hfs_mdb_commit+0x503/0x1160 fs/hfs/mdb.c:309
hfs_sync_fs+0x1d/0x30 fs/hfs/super.c:38
sync_filesystem+0x1cf/0x230 fs/sync.c:66
fs_bdev_sync+0x2c/0x50 fs/super.c:1433
blkdev_flushbuf block/ioctl.c:520 [inline]
blkdev_common_ioctl+0x12e1/0x3250 block/ioctl.c:658
blkdev_ioctl+0x528/0x740 block/ioctl.c:791
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f1d9239de59
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fffd0ece148 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f1d92625fa0 RCX: 00007f1d9239de59
RDX: 0000000000000000 RSI: 0000000000001261 RDI: 0000000000000004
RBP: 00007f1d92433e6f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f1d92625fac R14: 00007f1d92625fa0 R15: 00007f1d92625fa0
</TASK>
This was found by fuzzing an HFS image on a loop device backed by a
memfd; under memory pressure the shmem write-back path returned
-ENOSPC (mm/shmem.c, shmem_acct_blocks()), which surfaced as a plain
write error on the block device. The call path: ioctl(BLKFLSBUF) ->
blkdev_common_ioctl() -> sync_filesystem() -> hfs_sync_fs() ->
hfs_mdb_commit().
Check buffer_uptodate() on mdb_bh/alt_mdb_bh before dirtying them.
If either has gone stale, mark the volume read-only and skip the
write instead of asserting on it. Also, hfs_mdb_commit() returns
-EIO error code in such situation. As a result, hfs_sync_fs() can
report the failure instead of always returning 0.
The sync()/fsync()/BLKFLSBUF now observe -EIO instead of silently
succeeding while the volume goes read-only underneath them.
Reported-by: syzbot+c149ad75e9633be0c1ad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c149ad75e9633be0c1ad
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260709225001.473320-2-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
The xfstests' test-case generic/564 fails for
the case of HFS+ file system. Test-case expects that
file system driver reports -EFBIG error code in the case
if there is the effort to write beyond 8TiB. However, HFS+
file system driver returns -ENOSPC instead.
The root cause is that hfsplus_fill_super() sets s_maxbytes
as MAX_LFS_FILESIZE. VFS therefore considers the write
position valid and calls into the filesystem. Because HFS+
does not support holes, cont_write_begin() zero-fills
the entire intermediate range from the current end-of-file
to the target offset. On a small test volume this exhausts
free space long before any block-number overflow is detected,
producing -ENOSPC instead of -EFBIG.
This patch fixes the issue by adding a bounds check at
the top of hfsplus_write_begin(). If the requested write
position is at or beyond the actual capacity of the volume
in bytes, return -EFBIG immediately before cont_write_begin()
is entered and before any zero-fill I/O is attempted.
sudo ./check generic/564
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 7.2.0-rc1-dirty #50 SMP PREEMPT_DYNAMIC Fri Jul 3 16:22:27 PDT 2026
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/564 13s ... 43s
Ran: generic/564
Passed all 1 tests
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260706221738.140271-2-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
Likewise HFS+, HFS has the same issue of returning
the -ENOSPC error code instead of -EFBIG in the case
if there is the effort to write beyond 8TiB.
The root cause is that hfs_fill_super() sets s_maxbytes
as MAX_LFS_FILESIZE. VFS therefore considers the write
position valid and calls into the filesystem. Because HFS
does not support holes, cont_write_begin() zero-fills
the entire intermediate range from the current end-of-file
to the target offset. On a small test volume this exhausts
free space long before any block-number overflow is detected,
producing -ENOSPC instead of -EFBIG.
This patch fixes the issue by adding a bounds check
at the top of hfs_write_begin(). If the requested write
position is at or beyond the actual capacity of the volume
in bytes, return -EFBIG immediately before cont_write_begin()
is entered and before any zero-fill I/O is attempted.
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260706221804.140295-2-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
hfsplus_delete_cat() is called with str == NULL when the last open
reference to an unlinked HFS+ hardlink backing inode is closed. In that
case, the function finds the catalog thread by CNID and rebuilds the
catalog key from thread.nodeName.
That reconstruction path reads thread.nodeName.length directly from the
catalog B-tree into fd.search_key and then copies length * 2 bytes into
fd.search_key->cat.name.unicode. It does not first check that the found
record is a thread record or that its size matches the thread name.
A corrupted image can therefore provide an oversized thread name length
and make hfs_bnode_read() write past the catalog search-key allocation.
Read the CNID record through hfsplus_brec_read_cat(), which bounds the
record read to sizeof(hfsplus_cat_entry) and verifies that a thread
record's size exactly matches nodeName.length. Together, these checks
ensure an accepted thread name fits HFSPLUS_MAX_STRLEN. Reject non-thread
records before building the delete key from the validated thread name.
Share the thread-record-type helper between hfsplus_find_cat() and
hfsplus_delete_cat().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Assisted-by: Codex:gpt-5.6
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260709010203.49664-1-kylebot@openai.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
hfs_cat_find_brec() first resolves a catalog thread record by CNID and
then looks up the corresponding catalog record by parent/name. On a
corrupted filesystem image, the second lookup may find a record whose
CNID does not match the CNID that was requested.
Validate the record found by the second lookup before returning it.
Read the already-found record with hfs_bnode_read(), require the exact
fixed size for file and directory records, reject other record types,
and verify that the stored CNID matches the requested CNID.
Also validate reserved CNIDs in hfs_read_inode() before populating the
inode, propagate hfs_read_inode() failures from the resource-fork lookup
path, and reject bad resource-fork and root inodes.
Keep hfs_write_inode() unchanged, so corrupted catalog records are
rejected before reaching its existing reserved-CNID BUG() path.
Reported-by: syzbot+97e301b4b82ae803d21b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=97e301b4b82ae803d21b
Cc: George Anthony Vernon <contact@gvernon.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Maximiliano Hermitte <davemadmaxxx@gmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260708215636.73815-1-davemadmaxxx@gmail.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
ni_create_attr_list() allocates a fixed buffer of al_aligned(record_size)
(== record_size) bytes and then walks every attribute of the primary MFT
record, writing one ATTR_LIST_ENTRY per attribute and advancing the cursor
by le_size(name_len), with no check against the end of the buffer; the
total size is only computed after the loop.
A minimum-size resident attribute occupies SIZEOF_RESIDENT (0x18 = 24)
bytes on disk, but an unnamed attribute expands to le_size(0) (0x20 = 32)
bytes in the list. Because the number of attributes in a record is not
bounded (mi_enum_attr() accepts arbitrarily many equal-type, nameless
minimum-size attributes), a crafted record packed with such attributes
produces a list larger than record_size and overflows the heap buffer.
This is reachable from a crafted, loop-mounted NTFS image: opening the file
and adding an attribute (e.g. via setxattr) drives ntfs_set_ea() ->
ni_insert_resident() -> ni_insert_attr() -> ni_ins_attr_ext() ->
ni_create_attr_list().
BUG: KASAN: slab-out-of-bounds in ni_create_attr_list+0xc48/0x1058
Write of size 4 at addr ffff000008984c00 by task setfattr/345
ni_create_attr_list+0xc48/0x1058
ni_ins_attr_ext+0x510/0x7c0
ni_insert_attr+0x3f8/0x70c
ni_insert_resident+0xc8/0x3b0
ntfs_set_ea+0x66c/0xd28
ntfs_setxattr+0x4d8/0x5b0
__arm64_sys_setxattr+0xa4/0x124
Allocated by task 345:
ni_create_attr_list+0x188/0x1058
The buggy address belongs to the cache kmalloc-1k of size 1024
(the write lands at object+1024).
Size the buffer from the actual attributes instead of assuming a single
record_size is always enough.
Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation")
Reported-by: HE WEI（ギカク） <skyexpoc@gmail.com>
Signed-off-by: HE WEI（ギカク） <skyexpoc@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Get rid of unnecessary duplications, improve readability, clang-format
the code.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
NTFS inode and MFT record numbers are inherently 64-bit values, but
several places stored them in 'unsigned long' (or CLST, a u32). On 32-bit
architectures 'unsigned long' is only 32 bits wide, so the upper bits of
a record reference are truncated. Store these values in u64 and update
the associated format specifiers (%lx -> %llx) accordingly.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
In case of error during resource acquisition the driver should print
an error message only if it is not deferred probe. Use dev_err_probe
helper to handle this, which will also record defer probe reason for
debugging.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260602-exynos4-sii9234-driver-v4-2-9b2fc38e104a@grimler.se
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Fix spelling and formatting so that the code is easier to follow, and
so that it is more searchable.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260602-exynos4-sii9234-driver-v4-1-9b2fc38e104a@grimler.se
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
drm_gpusvm_get_pages() only stored the local dpagemap into
svm_pages->dpagemap on the success path. If a later page failed (e.g.
-EOPNOTSUPP when ctx->allow_mixed is false) and jumped to err_unmap,
svm_pages->dpagemap was still NULL, so __drm_gpusvm_unmap_pages() skipped
device_unmap() and leaked the device mappings already created.
Assign svm_pages->dpagemap when the first device page is mapped so the
err_unmap path can device_unmap() those mappings.
This issue was found by Sashiko AI review.
Fixes: f70da6f99d4f ("drm/gpusvm: pull out drm_gpusvm_pages substructure")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260701062800.409248-4-honghuan@amd.com
|
|
In a mixed range: ctx->allow_mixed dpagemap is not NULL while some entries
are system pages. The unmap loop used:
dma_unmap_page(...);
else if (dpagemap && dpagemap->ops->device_unmap)
dpagemap->ops->device_unmap(...);
When use_iova is true the first condition is false for system pages,
so they fall through to device_unmap() and a system DMA address is
handed to the device specific unmap callback, risking invalid accesses
or state corruption.
Key the branch off addr->proto instead: system pages only need an explicit
dma_unmap_page() in the non IOVA case, IOVA system pages are already torn
down by the single dma_iova_destroy(), and only genuine device pages
reach device_unmap().
This issue was found by Sashiko AI review.
Fixes: 37ad039fb367 ("drm/gpusvm: Use dma-map IOVA alloc, link, and sync API in GPU SVM")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260701062800.409248-3-honghuan@amd.com
|
|
dma_iova_try_alloc() reserves IOVA for the entire range, but in a mixed
range only the system pages are linked (their total size is state_offset)
while device pages never touch the IOVA state. dma_iova_destroy() with
state_offset only frees the linked part, permanently leaking the IOVA
reserved for the device pages and eventually exhausting the IOVA space.
Unlink the linked system-page portion and free the whole reserved IOVA
instead. On the get_pages() error path state_offset is 0 (no page linked,
dma_addr[0] unpopulated), so skip the unlink and just free the reservation;
this also avoids reading the uninitialized dma_addr[0].dir there.
Allocate the dma_addr array with the zeroing kvzalloc_objs() so every entry
has a well-defined value.
This issue was found by Sashiko AI review.
Fixes: 37ad039fb367 ("drm/gpusvm: Use dma-map IOVA alloc, link, and sync API in GPU SVM")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260701062800.409248-2-honghuan@amd.com
|
|
xe_bo_move() attaches VF CCS read/write batch buffers (BBs) to a BO
after it transitions NULL/SYSTEM -> TT, and detaches them after it
transitions TT -> SYSTEM. Both operations were done synchronously on
the CPU immediately after building the move's copy/clear fence,
without waiting for that fence to signal. This creates two races with
VF migration:
- Attach happens too late relative to the copy job it is meant to
protect. If the copy job is submitted before the CCS BBs are
attached, a VF migration event that pauses execution mid-copy can
observe partially copied CCS metadata without the attach state
needed to correctly save/restore it.
- Detach happens too early relative to the copy job that moves data
out of TT. The CCS BBs are torn down right after the copy fence is
obtained, while the actual blit may still be in flight. A VF
migration event that pauses execution mid-copy can then race the
save/restore path against the still-running blit, and the CCS BBs
it would need to make sense of the paused state have already been
removed.
Fix both races:
- Move the attach call to before the copy/clear job is submitted, so
the CCS BBs are already registered by the time the copy runs. On
attach failure, unwind and bail out of the move. xe_migrate_ccs_rw_copy()
now takes the destination resource explicitly, since bo->ttm.resource
is not updated to the new resource until after the move commits.
- Detach only after explicitly waiting for the copy fence to signal,
instead of tearing down the CCS BBs immediately after obtaining it.
While here, also fix xe_sriov_vf_ccs_attach_bo() to properly unwind and
propagate errors: the per-context loop previously never broke out on
error, silently discarding earlier failures. Unwind by clearing each
attached context directly via xe_migrate_ccs_rw_copy_clear() instead of
reusing xe_sriov_vf_ccs_detach_bo(), which requires both contexts to be
attached before it will clean up either one.
Fixes: 864690cf4dd6 ("drm/xe/vf: Attach and detach CCS copy commands with BO")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Assisted-by: GitHub_Copilot:claude-sonnet-5
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260714062440.3421225-1-matthew.brost@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific fixes (including
regression fixes) or quirks accumulated since the last update. Some
highlights:
USB-audio:
- Fix per-channel volume imbalance regression for sticky mixers
- Validate input packet length in caiaq driver
- Quirks for iBasso DC-Elite, Musical Fidelity M6s DAC, and Redragon
H510-PRO Wireless headset
HD-audio:
- Fix a long-standing bug of cached processing coefficient verbs
- Make cs35l56 driver failing with missing firmware
- Fix cirrus codec Kconfig dependency, update MAINTAINERS
- Remove unneeded mic bias threshold override on Conexant
- Realtek codec quirks for ASUS ROG Ally X (headphone & mic), Dell
QCM1255, Legion Pro 7, HP/Victus laptops, Framework, and TongFang
laptops
ASoC:
- Add Eliza audio support on Qualcomm sc8280xp/sm8250 SoCs
- Fix SDCA linker error with ACP on AMD
- A few fixes for AMD ACP PCI driver
- Add TAS2783 support on AMD ACP 7.0 platforms
- Reset RT712-SDCA codec to fix silent headphone issue
- Soft reset S/PDIF datapath on Meson AIU FIFO
- Jack report fix for cs42l43
- TAS2562 shutdown GPIO clearing fix
- Sidecar amps quirk for Lenovo laptop in SOF SDW driver
Misc:
- Drop redundant mod_devicetable.h includes from FireWire drivers
- Fix memory leak and format mismatch in mixer kselftest"
* tag 'sound-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (36 commits)
ALSA: usb-audio: Add delay quirk for iBasso DC-Elite
ALSA: hda: conexant: Remove mic bias threshold override
ALSA: hda/realtek: Fix speakers on Legion Pro 7 16ARX8H with codec SSID 17aa:38a7
ALSA: hda/realtek: Fix speakers on MECHREVO WUJIE Series
ALSA: hda: cs35l56: Fail if wmfw file is missing
ALSA: usb-audio: Skip DSD quirk for Musical Fidelity M6s DAC
ALSA: hda: MAINTAINERS: Fix missing cirrus* file reference
ALSA: hda/cirrus_scodec: Make Kconfig visible if KUNIT
ALSA: hda/realtek: Add quirk for TongFang X6xx45xU
ALSA: hda/realtek - Fixed Headphone noise issue for Dell QCM1255
ASoC: tas2562: fix deprecated 'shut-down' GPIO always cleared after lookup
ASoC: cs42l43: Correct report for forced microphone jack
ASoC: qcom: sc8280xp: Add support for Eliza
ASoC: dt-bindings: qcom,sm8250: Add Eliza sound card
ASoC: dt-bindings: qcom: Add Eliza LPASS macro codecs
ALSA: hda/realtek: Add mic mute LED quirk for HP Laptop 15-fd0xxx
ALSA: hda/realtek - Add quirk for HP Victus 15-fa0xxx (MB 8A50)
ALSA: usb-audio: Add quirk for Redragon H510-PRO Wireless headset
ASoC: amd: ps: replace bitwise OR with logical OR in IRQ return check
ASoC: amd: ps: fix wrong ACP version string in pci_request_regions()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix root structure leak after relocation error
- fix optimization when checksums are read from commit root, fall back
to checksum root during relocation
- in tree-checker, validate length of inode reference in items
- validate properties before setting them
- validate free space cache entries on load
- transaction abort fixes
- fix printing of internal trees as signed numbers
- add error messages after critical lzo compression errors
* tag 'for-7.2-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: print-tree: print header owner as signed
btrfs: decentralize transaction aborts in create_reloc_root()
btrfs: tree-checker: validate INODE_REF's namelen
btrfs: lzo: add error message for invalid headers
btrfs: fallback to transaction csum tree on a commit root csum miss
btrfs: fix root leak if its reloc root is unexpected in merge_reloc_roots()
btrfs: reject free space cache with more entries than pages
btrfs: fix transaction abort logic in btrfs_fileattr_set()
btrfs: validate properties before setting them
|
|
Endpoint probes can race while enumerating a shared switch. If a
sibling probe adds the dport first, the losing probe finds the dport
already present, gets -EBUSY, and fails to enumerate the endpoint.
Treat this race the same as the existing port-created case by
restarting the port walk, allowing it to find the existing dport
and continue enumeration.
This race was discovered while testing a cxl_test mixed-granularity
topology, where twelve endpoints behind shared switches are probed in
parallel during module load.
Fixes: 4f06d81e7c6a ("cxl: Defer dport allocation for switch ports")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Link: https://patch.msgid.link/20260714020438.1822669-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
A Get or Set Feature payload larger than the mailbox payload size is
split into several mailbox commands. mbox_mutex only serializes
individual mailbox commands and is dropped between iterations of these
loops. Nothing serializes the multi-part transfer as a whole.
cxl_get_feature() and cxl_set_feature() are reachable concurrently
from fwctl (per-fd RPCs run under a read-held registration lock) and
from the EDAC scrub/ECS/repair paths, so two transfers to the same
mailbox can interleave their parts and corrupt the device's transfer
context.
Add a per-mailbox feat_mutex and hold it across the whole transfer in
both functions. It nests outside mbox_mutex (which is taken inside
cxl_internal_send_cmd()), and is taken nowhere else, so no lock-ordering
inversion is introduced.
Link: https://sashiko.dev/#/patchset/20260702090849.47501-1-icheng@nvidia.com?part=1
Fixes: 5e5ac21f629d ("cxl/mbox: Add GET_FEATURE mailbox command")
Fixes: 14d502cc2718 ("cxl/mbox: Add SET_FEATURE mailbox command")
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Richard Cheng <icheng@nvidia.com>
Link: https://patch.msgid.link/20260709155841.1895915-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
cxl_pci_setup_regs() for CXL_REGLOC_RBI_COMPONENT can return
-EPROBE_DEFER on a Restricted CXL Host (RCD) when the upstream port
has not yet been enumerated and the Component Registers must be
extracted from the RCRB. cxl_pci_probe() treats every non-zero return
from that call as the benign "component registers not found" case,
logs a warning, and continues. The rc is then immediately overwritten
by the subsequent cxl_pci_type3_init_mailbox() call, so the deferral
is silently swallowed.
Return -EPROBE_DEFER instead of continuing so the probe is retried
once the upstream port is available.
Fixes: 733b57f262b0 ("cxl/pci: Early setup RCH dport component registers from RCRB")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/linux-cxl/ajzhsubot_PSYtHQ@MWDK4CY14F/T/#m063bbf76b1c9c293ade52ab311018ae6bba11a44
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/linux-cxl/ajzhsubot_PSYtHQ@MWDK4CY14F/T/#m063bbf76b1c9c293ade52ab311018ae6bba11a44
Link: https://patch.msgid.link/20260706224322.714934-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
A device that returns count == 0 with CXL_POISON_FLAG_MORE set on every
iteration never advances nr_records, so the max_errors guard never
trips and the do/while loops forever while holding poison.mutex. That
hangs the sysfs-triggered scan thread and blocks all subsequent poison
operations on the device. The existing "Protect against an uncleared
_FLAG_MORE" guard was intended to bound a misbehaving device but does
not cover the count == 0 case.
Stop the loop on an empty payload so a malfunctioning or malicious
device cannot wedge the poison scan.
Link: https://sashiko.dev/#/patchset/20260702090849.47501-1-icheng@nvidia.com?part=3
Fixes: ed83f7ca398b ("cxl/mbox: Add GET_POISON_LIST mailbox command")
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260709155714.1893280-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
drm_for_each_bridge_in_chain()
drm_for_each_bridge_in_chain_scoped() was added in commit e46efc6a7d28
("drm/bridge: add drm_for_each_bridge_in_chain_scoped()") to provide a
safer alternative to drm_for_each_bridge_in_chain().
Following commits converted all users to the _scoped variant.
Finally commit 2f08387a444c ("drm/bridge: remove
drm_for_each_bridge_in_chain()") removed the old
drm_for_each_bridge_in_chain() macro.
It's time to rename drm_for_each_bridge_in_chain_scoped() back to the
original name.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260630-drm-bridge-alloc-getput-for_each_bridge-2-v2-1-e0a1094cd1eb@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
cxl_fw_prepare() classifies a firmware image as a one-shot transfer
only when its Transfer FW input payload is smaller than the mailbox
payload size. An image that exactly fills the payload is therefore
treated as a multi-part transfer.
The firmware loader invokes cxl_fw_write() only once for that image.
Since both offset == 0 and remaining == 0, the multi-part action
selection sends INITIATE, never sends END, and then attempts to activate
the target slot.
Include equality in the one-shot classification so exact-fit images use
the FULL action.
Fixes: 9521875bbe00 ("cxl: add a firmware update mechanism using the sysfs firmware loader")
Signed-off-by: Guzebing <Guzebing1612@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260713112744.2543829-1-guzebing1612@gmail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The witable override should be set when FDO_MODE bit is enabled.
Fix the comparison to distingush this case from legacy systems
where bit should be disabled to have override.
Cc: stable@vger.kernel.org
Fixes: 9dde74fd9e65 ("drm/xe/nvm: enable cri platform")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260714-cri_nvm_fdo_flip-v2-1-14580e71b58e@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add scu power key node.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add compatible string fsl,imx8qm-sc-key for i.MX8QM and fallback to
fsl,imx-sc-key.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
