| Age | Commit message (Collapse) | Author |
|---|
|
Fix two typos in the ftrace operations sample benchmark comment.
Link: https://patch.msgid.link/20260621095153.93762-1-pyudistira519@gmail.com
Signed-off-by: Yudistira Putra <pyudistira519@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The tracepoint_printk symbol is not exported, so make it
static to remove the following sparse warning:
kernel/trace/trace.c:90:5: warning: symbol 'tracepoint_printk' was not declared. Should it be static?
Fixes: dd293df6395a2 ("tracing: Move trace sysctls into trace.c")
Link: https://patch.msgid.link/20260617105822.904164-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Intel HD Audio defines Coefficient Index and Processing Coefficient as
separate audio widget controls in the Audio Widget Verb Definitions:
Coefficient Index selects the coefficient slot, while Processing
Coefficient accesses the value at the selected slot.
hda_reg_read_coef() selects the slot with AC_VERB_SET_COEF_INDEX, but
then uses AC_VERB_GET_COEF_INDEX for the value read. That reads back the
selected index instead of the coefficient value. hda_reg_write_coef()
has the same issue and builds the value write from AC_VERB_GET_COEF_INDEX
instead of AC_VERB_SET_PROC_COEF.
This only affects the regmap coefficient cache path used by codecs that
set codec->cache_coef. Direct coefficient helpers already use the normal
SET_COEF_INDEX followed by GET_PROC_COEF or SET_PROC_COEF sequence, which
is likely why this has not been noticed widely.
Use AC_VERB_GET_PROC_COEF for cached coefficient reads and
AC_VERB_SET_PROC_COEF for cached coefficient writes.
Fixes: 40ba66a702b8 ("ALSA: hda - Add cache support for COEF read/write")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/DB9023BF2920BA99+20260707132419.1731342-1-raoxu@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 8928e4a3be34 ("ring-buffer: Show persistent buffer dropped events
in trace_pipe file") split the "commit" variable in
ring_buffer_read_page() into "commit" (raw) and "size" (masked page
size), but the inner copy loop's terminator was changed to compare rpos
against "event_size" instead of "size".
rpos is the cumulative read offset within the page; event_size is the
length of the single event just copied. The loop thus breaks after the
first event, so only one event is copied per call. This regresses the
per-event memcpy path (partial reads, the active commit page, and
mapped/remote buffers) used by splice/trace_pipe_raw and mmap consumers
into a one-event-at-a-time read.
Compare rpos against the page size as the original code did.
Link: https://patch.msgid.link/20260616175538.111628-1-devnexen@gmail.com
Fixes: 8928e4a3be34 ("ring-buffer: Show persistent buffer dropped events in trace_pipe file")
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Use ARRAY_SIZE(snd_minors) instead of SNDRV_OS_MINORS directly, for
consistency with snd_find_free_minor() and snd_unregister_device() in
the same file. No functional change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260707074556.569451-1-phucduc.bui@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The condition
if (count && size < count)
can never evaluate to true.
The VIA DMA count register is masked with 0x00ffffff before use, while
the DMA buffer size is limited to 0x00fffffe bytes. As a result, 'count'
can never exceed 'size', making the condition permanently false.
This branch has therefore been unreachable since the driver was
introduced. Remove the unreachable branch without changing runtime
behavior.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Evgenii Burenchev <evg28bur@yandex.ru>
Link: https://patch.msgid.link/20260706131638.15311-1-evg28bur@yandex.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull header inclusion fix for firewire drivers
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The ALSA FireWire driver headers include <linux/firewire.h>, which
already provides struct ieee1394_device_id via
<linux/device-id/ieee1394.h>.
Drop the now-redundant direct <linux/mod_devicetable.h> includes
from the per-device headers.
Signed-off-by: Longlong Xia <xialonglong2025@163.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260706032639.273929-1-xialonglong2025@163.com
|
|
Add driver for the Qualcomm interconnect buses found in Maili
based platforms. The topology consists of several NoCs that are
controlled by a remote processor that collects the aggregated
bandwidth for each master-slave pairs.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260622-maili_icc-v2-2-18b5ac08c04f@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The ASUS ROG Ally X (RC72LA, PCI SSID 0x1043:0x1eb3) leaves the combo
jack microphone pin (0x19) unconfigured, so a headset microphone is
neither detected nor captured. Only the internal microphone is
available.
Add a pin override that configures node 0x19 as an external headset
mic, the same way the original ROG Ally does. The headphone output
fixup chain is preserved, so speaker and headphone routing are
unchanged.
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260707005615.52889-2-matthew.schwartz@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The ASUS ROG Ally X (RC72LA, PCI SSID 0x1043:0x1eb3) with an ALC294
codec produces no sound from the headphone jack, and unplugging the
headphones can leave the speakers muted too.
The device uses ALC287_FIXUP_TAS2781_I2C, which chains into the
ThinkPad fixup chain. alc285_fixup_thinkpad_x1_gen7() makes the
headphone (pin 0x21) and speaker (pin 0x17) share DAC 0x03. That is
correct for a ThinkPad, but here the shared DAC is exposed as a
"Line Out" control that defaults to zero, so the headphones stay
silent when plugged in.
Add a dedicated fixup chain for the Ally X that sets up the TAS2781
amplifier and the headset jack without the ThinkPad DAC sharing, and
routes the speaker to DAC 0x02 so the headphone and speaker get
independent DACs.
Also, fixup the wrong product code (it's RC72LA, not RCLA72).
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260707005615.52889-1-matthew.schwartz@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
interconnect in Maili SoC
Document the RPMh Network-On-Chip interconnect for the Qualcomm Maili
SoC.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260622-maili_icc-v2-1-18b5ac08c04f@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current error handling in snd_hdac_bus_alloc_stream_pages()
returns directly on failure without cleaning up already allocated
resources. While callers are supposed to release those via
snd_hdac_bus_free_stream_pages() at destructor, adding explicit
cleanup makes the function more self-contained and safer against
future misuse.
Add proper error cleanup path using goto labels to free previously
allocated BDL DMA buffers, position buffer, and ring buffer in
reverse allocation order.
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Link: https://patch.msgid.link/tencent_8E5BBBD19D53B1EFCDB6E89F3B6246A70B06@qq.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add Epoch Subsystem (EPSS) L3 interconnect provider support on
Qualcomm Shikra SoC.
The EPSS L3 block on Shikra SoC is similar to existing Qualcomm EPSS/OSM
L3 providers, but supports only up to 12 frequency lookup table entries.
Reading beyond the supported LUT entries can expose incorrect frequencies.
Add shikra-specific EPSS descriptor shikra_epss_l3_perf_state that reuses
existing EPSS configuration with appropriate LUT entries limit.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Link: https://patch.msgid.link/20260603-shikra_epss_l3-v3-2-3c2e0b796e78@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add a missing blank line between SND_SOC_SOF_AMD_ACP70 and
SND_SOC_SOF_AMD_ACP7X config entries to conform to Kconfig formatting
convention.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260707060918.2535962-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Shikra SoC
Document the EPSS L3 interconnect provider binding for Qualcomm
Shikra SoC.
The Shikra EPSS L3 block is similar to existing Qualcomm EPSS/OSM L3
providers, but supports only up to 12 frequency lookup table entries.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260603-shikra_epss_l3-v3-1-3c2e0b796e78@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Use the descriptor's `ep_mem_offset` to calculate the start of the endpoint
memory access array and to comply with the FF-A spec instead of defaulting
to `sizeof(struct ffa_mem_region)`.
This requires moving `ffa_mem_region_additional_setup()` earlier in the setup
flow.
Also, add sanity checks to ensure the calculated descriptor offsets do not
exceed `max_fragsize`.
Fixes: 113580530ee7 ("firmware: arm_ffa: Update memory descriptor to support v1.1 format")
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://patch.msgid.link/20260702103848.1647249-3-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Sashiko (locally) reports multiple out-of-bound issues in
ffa_setup_and_transmit:
1) Writing ep_mem_access->reserved can write out of bounds for FFA
versions < 1.2 as ffa_emad_size_get() returns 16 bytes in that case
while reserved has an offset of 24.
Instead of zeroing fields, memset the struct to zero first based on
the FFA version.
2) Make sure there is enough size to write constituents.
While at it, convert the only sizeof() in the driver that uses a
type instead of variable.
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Fixes: 111a833dc5cb ("firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://patch.msgid.link/20260702103848.1647249-2-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Compiling RTLA 7.1.x with GCC 16 and uClibc as standard library fails
with these errors:
src/common.c: In function ‘set_signals’:
src/common.c:40:17: error: implicit declaration of function ‘alarm’ [-Wimplicit-function-declaration]
40 | alarm(params->duration);
| ^~~~~
src/common.c: In function ‘common_apply_config’:
src/common.c:187:44: error: implicit declaration of function ‘getpid’; did you mean ‘getpt’? [-Wimplicit-function-declaration]
187 | retval = sched_setaffinity(getpid(), sizeof(params->hk_cpu_set),
| ^~~~~~
| getpt
In file included from src/common.c:9:
src/common.c: In function ‘run_tool’:
src/common.c:262:19: error: implicit declaration of function ‘sysconf’; did you mean ‘sscanf’? [-Wimplicit-function-declaration]
262 | nr_cpus = get_nprocs_conf();
| ^~~~~~~~~~~~~~~
src/common.c:262:19: error: ‘_SC_NPROCESSORS_CONF’ undeclared (first use in this function)
262 | nr_cpus = get_nprocs_conf();
| ^~~~~~~~~~~~~~~
src/common.c:262:19: note: each undeclared identifier is reported only once for each function it appears in
src/common.c:370:17: error: implicit declaration of function ‘sleep’ [-Wimplicit-function-declaration]
370 | sleep(1);
| ^~~~~
Restore the missing unistd.h include.
Fixes: 115b06a00875 ("tools/rtla: Consolidate nr_cpus usage across all tools")
Signed-off-by: Andreas Ziegler <br025@umbiko.net>
Link: https://lore.kernel.org/r/20260624033342.129970-1-br025@umbiko.net
[ capital letter in patch subject, remove EOL after Fixes ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
This series enables QoS configuration for QNOC type device which
can be found on X1E80100 platform. It enables QoS configuration
for master ports with predefined priority and urgency forwarding.
This helps in prioritizing the traffic originating from different
interconnect masters at NOC (Network On Chip).
The system may function normally without this feature. However,
enabling QoS helps optimize latency and bandwidth across subsystems
like CPU, GPU, and multimedia engines, which becomes important in
high-throughput scenarios. This is a feature aimed at performance
enhancement to improve system performance under concurrent workloads.
* icc-x1e80100
dt-bindings: interconnect: qcom,x1e80100-rpmh: add clocks property to enable QoS
interconnect: qcom: x1e80100: enable QoS configuration
Link: https://patch.msgid.link/20260527-x1e80100_qos-v2-0-305c6539e6d2@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Enable QoS configuration for master ports with predefined priority
and urgency forwarding.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Link: https://patch.msgid.link/20260527-x1e80100_qos-v2-2-305c6539e6d2@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Some interconnect nodes on X1E80100 have QoS registers located inside
a block whose interface is clock-gated. For those nodes, driver
must enable the corresponding clock(s) before accessing the
registers. Add the 'clocks' property so the driver can obtain
and enable the required clock(s).
Only interconnects that have clock-gated QoS register interface
use this property; it is not applicable to all interconnect nodes.
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260527-x1e80100_qos-v2-1-305c6539e6d2@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stanislav Fomichev says:
====================
net: hold instance lock around NETDEV_DOWN and NETDEV_GOING_DOWN
NETDEV_UP and NETDEV_REGISTER already run under the per-device
instance lock. The teardown side does not. Make it symmetric so
ops-locked drivers can rely on the lock being held in both
directions.
====================
Link: https://patch.msgid.link/20260702224150.3730033-1-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The lock-state table marks UNREGISTER as unlocked without saying
why. Add a short note that many handlers release the lowers via
dev_close().
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260702224150.3730033-7-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Sprinkle a few asserts about ops lock: netif_close_many and __dev_notify_flags
should now consistently run under the lock
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260702224150.3730033-6-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rtnl_configure_link calls __dev_change_flags() and __dev_notify_flags,
both need the instance lock. rtnl_newlink_create grabs it but stacked
devices do not. Move the lock inside rtnl_configure_link.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260702224150.3730033-5-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
netif_close_many will soon assert ops lock (for locked DOWN/GOING_DOWN).
Update mtk_eth_set_dma_device to manually grab and release the ops lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260702224150.3730033-4-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
netif_close_many will soon assert ops lock (for locked DOWN/GOING_DOWN).
Update dsa_switch_shutdown to manually grab and release the ops lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260702224150.3730033-3-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Mirror what call_netdevice_register_net_notifiers does but for the
teardown. Cover only DOWN and GOING_DOWN. UNREGISTER is still unlocked
because of the SW devices using dev_xxx methods.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260702224150.3730033-2-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This series enables QoS configuration for QNOC type device which
can be found on SC8280XP platform. It enables QoS configuration
for master ports with predefined priority and urgency forwarding.
This helps in prioritizing the traffic originating from different
interconnect masters at NOC (Network On Chip).
The system may function normally without this feature. However,
enabling QoS helps optimize latency and bandwidth across subsystems
like CPU, GPU, and multimedia engines, which becomes important in
high-throughput scenarios. This is a feature aimed at performance
enhancement to improve system performance under concurrent workloads.
* icc-sc8280xp
dt-bindings: interconnect: qcom,sc8280xp-rpmh: Add reg and clocks for QoS
interconnect: qcom: sc8280xp: Enable QoS configuration
Link: https://patch.msgid.link/20260507-sc8280xp-qos-v1-0-15135858cd98@radxa.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Convert the Texas Instruments DA8XX Master Peripheral
Priority Registers bindings to DT schema.
Documentation:
OMAP-L138 (DA850) http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260630124631.2991596-1-egbostina@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The client cap is currently advertised unconditionally, even for drivers
that do not support plane color pipelines. If clients supporting the latter,
like Wayland compositors or tools like drm_info, enable the client cap on
such drivers they will be left without both color pipeline and the legacy
properties COLOR_ENCODING and COLOR_RANGE, effectively breaking YUV->RGB
conversion support.
Prevent that by only marking the cap supported if there are actually planes
with color pipelines.
Note: while the color pipeline replacement for the legacy properties is
still under review (1), we can assume that it will work as a drop-in
replacement. That means any plane on any hardware currently supporting
the legacy properties will be able to offer a functionally equal color
pipeline and there will be no technical reason keep using the legacy
properties if both the driver and the client support the new API.
[1] https://lore.kernel.org/dri-devel/20260623164812.81110-1-harry.wentland@amd.com/
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Fixes: 179ab8e7d7b3 ("drm/colorop: Introduce DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE")
Link: https://patch.msgid.link/20260703073230.19982-1-robert.mader@collabora.com
Suggested-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
GPIO interrupts may retain stale state across warm reboots when
peripherals remain powered. If a GPIO line is not explicitly
configured for interrupts, this can result in interrupt storms
due to missing handlers.
Fix this by ensuring all interrupts are masked and disabled at
hardware initialization time via the init_hw() callback. Pending
interrupts are also cleared to start from a known-safe state.
Interrupts will be unmasked only when explicitly configured by
userspace or kernel drivers.
Signed-off-by: Liang Hao <haohlliang@gmail.com>
Link: https://patch.msgid.link/20260705074759.47863-1-haohlliang@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
GPIO consumers such as gpio-keys can enable IRQ wake and adjust the wake
trigger type from their suspend callbacks. If the DWAPB controller suspends
first, masking interrupts and disabling its clocks in the normal suspend
phase prevents that late wake configuration from reliably reaching the
hardware. Systems with real DWAPB bus clocks then fail to wake from s2idle
through GPIO keys.
Save the register context in the normal suspend callback, but defer IRQ
masking and clock gating until suspend_noirq. At that point all consumers
have finished configuring wake IRQs, so keep the clocks enabled when wake
lines are armed and only gate them when no wake source is active.
Resume_noirq reenables clocks, if they were gated, before the normal resume
path restores registers.
Propagate wake requests to the parent irqchip while keeping the local wake
mask in sync with failures.
Fixes: 6437c7ba69c3 ("gpio: dwapb: Add wakeup source support")
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Link: https://patch.msgid.link/20260702-gpio-dwapb-wakeup-v2-1-203f2f33429f@ultrarisc.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The .driver_data member of the struct pci_device_id array were
initialized by list expressions relying on hidden assignment of .class
and .class_mask in PCI_VDEVICE().
Make the initialization more robust by using a named initializer. This
robustness is relevant for a planned change to struct pci_device_id that
replaces .driver_data by an anonymous union.
This change doesn't introduce changes to the compiled pci_device_id
array. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260524131905.871222-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .driver_data member of the struct pci_device_id array were
initialized by list expressions. This isn't easily readable if you're
not into PCI, still more given that it's hidden in macros. Using named
initializers is more explicit and thus easier to parse for a human. And
it's also more robust against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
pci_device_id that replaces .driver_data by an anonymous union.
Also drop a few explicit zeros that are not needed and improve
indention.
This change doesn't introduce changes to the compiled pci_device_id
array. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260522140103.769262-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The drm_exec component uses a variable with scope limited to the for() and
an indirect goto to allow instantiating multiple macros in the same
function.
This unfortunately doesn't work well with certain compilers when the
indirect goto can't be lowered to a direct jump.
Switch the indirect goto to a direct goto, the drawback is that we now
can't use the dma_exec_until_all_locked() macro in the same function
multiple times.
The is currently only one user of this and only as a hacky workaround
which is about to be removed.
So document that the __label__ statement should be used when the macro is
used multiple times and fix the tests and the only use case where that is
necessary.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 9920249a5288 ("drm/amdgpu: convert amdgpu_vm_lock_by_pasid() to drm_exec")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606231854.7LeCtlLe-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202606232356.gwHMAJAW-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202606240753.kYjobJVl-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202606241110.iUga5vVw-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202607031446.1PWG18mN-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202607031837.HSmBj8pr-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202607040159.GopyEswS-lkp@intel.com/
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20260704084133.122053-1-christian.koenig@amd.com
|
|
cfg80211_is_element_inherited() reads the first data octet of the
candidate element (id = elem->data[0]) to look it up in an extension
non-inheritance list. It does so after testing elem->id, but without
verifying that the element actually has a data octet. A zero-length
extension element (WLAN_EID_EXTENSION with length 0) therefore makes it
read one octet past the end of the element.
_ieee802_11_parse_elems_full() runs this check for every element of a
frame once a non-inheritance context exists -- e.g. while parsing a
per-STA profile of a Multi-Link element in a (re)association response,
or a non-transmitted BSS profile -- so a crafted frame from an AP can
trigger a one-octet slab-out-of-bounds read during element parsing:
BUG: KASAN: slab-out-of-bounds in cfg80211_is_element_inherited
Read of size 1 ... in net/wireless/scan.c
Return early (treat the element as inherited) when an extension element
carries no data, mirroring the existing handling of empty ID lists.
The bug was found by fuzzing ieee802_11_parse_elems_full() under KASAN.
Fixes: f7dacfb11475 ("cfg80211: support non-inheritance element")
Signed-off-by: HE WEI (ギカク) <skyexpoc@gmail.com>
Link: https://patch.msgid.link/20260707094828.16465-1-skyexpoc@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Enable static QoS configuration for SC8280XP NoC master ports with
predefined priority and urgency forwarding values.
Add the QoS box data for the SC8280XP providers, add regmap configurations
for the real NoCs, and mark only aggre1_noc and aggre2_noc as requiring
clocks for QoS register access.
Signed-off-by: Xilin Wu <sophon@radxa.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507-sc8280xp-qos-v1-2-15135858cd98@radxa.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add the register range and clock properties needed for programming NoC QoS
configuration on SC8280XP.
Require a register range for the real NoC providers, require QoS clocks for
aggre1_noc and aggre2_noc, and keep the virtual clk_virt and mc_virt
providers without MMIO resources or clocks.
Signed-off-by: Xilin Wu <sophon@radxa.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507-sc8280xp-qos-v1-1-15135858cd98@radxa.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Convert update_attrib() to return 0 on success and a
negative errno on failure. Update rtw_xmit() to handle
the returned error code.
No functional change intended.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260707112503.612-5-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert update_attrib_sec_info() to return 0 on success and
a negative errno on failure.
No functional change intended.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260707112503.612-4-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace goto-based error handling with direct returns and
remove the temporary res variable.
No functional change.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260707112503.612-3-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace goto-based error handling with direct returns and
remove the temporary res variable.
No functional change.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260707112503.612-2-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
and rtw_get_wps_attr()
Three IE/attribute parsing functions have missing bounds checks.
rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer
without verifying that the header bytes (tag + length) are within the
remaining buffer before reading them. Additionally, rtw_get_sec_ie()
compares the 4-byte WPA OUI at cnt+2 without checking that at least
6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at
cnt+6 without checking that at least 10 bytes remain.
rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at
entry, before verifying that wps_ielen is large enough to contain
the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside
the attribute loop, get_unaligned_be16() is called on attr_ptr and
attr_ptr+2 without checking that 4 bytes remain in the buffer.
Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie()
and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum
IE length requirement, add a wps_ielen < 6 early return in
rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop.
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260522004531.1038924-8-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The loop in is_ap_in_tkip() iterates over IEs without verifying that
enough bytes remain before dereferencing the IE header or its payload:
- pIE->element_id and pIE->length are read without checking that
i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the
buffer causes an OOB read.
- For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12,
which requires pIE->length >= 16. For WLAN_EID_RSN it compares
pIE->data + 8, requiring pIE->length >= 12. Neither requirement
is checked.
Add the missing IE header and payload bounds checks and guard each
data access with an explicit pIE->length minimum, matching the
pattern established in update_beacon_info().
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260522004531.1038924-7-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each
iteration but only guards on i < pkt_len. When a malicious AP sends an
AssocResponse whose last IE has only one byte remaining in the frame
(the element_id byte lands at pkt_len-1), the loop reads pIE->length
from pframe[pkt_len], which is one byte past the allocated receive buffer.
Additionally, even when the header bytes are in bounds, pIE->length
itself can extend the data window beyond pkt_len, silently passing a
truncated IE to the handler functions.
Add two guards at the top of the loop body:
1. Break if fewer than sizeof(*pIE) bytes remain (can't read header).
2. Break if the IE's declared data extends past pkt_len.
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260522004531.1038924-6-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
HT_caps_handler() iterates pIE->length bytes and writes into
HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct
HT_caps_element). Because pIE->length is a raw u8 from an over-the-air
802.11 AssocResponse frame and is never validated, a malicious AP can
set it up to 255, causing up to 229 bytes of out-of-bounds writes into
adjacent fields of struct mlme_ext_info.
Truncate the iteration count to the size of HT_caps.u.HT_cap using
umin() so that data from a longer-than-expected IE is silently ignored
rather than written out of bounds, preserving interoperability with APs
that pad the element. An early return on oversized IEs was considered
but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1
assignment that precedes the loop, silently disabling HT mode for APs
that append extra bytes to the HT Capabilities IE.
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260522004531.1038924-5-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
supplicant_ie is a 256-byte array in struct security_priv. The WPA and
WPA2 IE copy paths use:
memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2);
where wpa_ielen is the raw IE length field (u8, 0-255). When a local user
supplies a connect request via nl80211 with a crafted WPA IE of length 255,
wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into
the adjacent last_mic_err_time field.
rtw_parse_wpa_ie() does not prevent this: its length consistency check
compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255
when wpa_ie_len = 257, so the check passes silently.
Add explicit bounds checks for both the WPA and WPA2 paths before the
memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the
supplicant_ie buffer.
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260522004531.1038924-4-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
join_cmd_hdl()
Two IE parsing loops are missing the header bounds checks before they
dereference pIE->length:
- issue_assocreq() walks pmlmeinfo->network.ies to build the
association request. If the stored IE data ends with only an
element_id byte and no length byte, pIE->length is read one byte
past the end of the buffer.
- join_cmd_hdl() walks pnetwork->ies during station join and has
the same problem under the same conditions.
Both buffers are filled from AP beacon and probe-response frames, so a
malicious AP that sends a truncated final IE can trigger the issue.
Apply the two-guard pattern established in update_beacon_info():
1. Break if fewer than sizeof(*pIE) bytes remain.
2. Break if the IE's declared data extends past the buffer end.
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260522004531.1038924-3-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
