| Age | Commit message (Collapse) | Author |
|---|
|
The AD3532R/AD3532 is a 16-channel, 16-bit voltage output DAC. It shares
similar functionality with AD3530R but splits its registers into two
banks: bank 0 at 0x10xx for channels 0-7 and bank 1 at 0x30xx for
channels 8-15. The input, LDAC trigger and operating-mode registers are
therefore selected per bank.
Add the AD3532R register map, channel specs, per-bank register arrays, a
dedicated powerdown handler and its own regmap_config, reusing the
table-driven helpers for the shared configuration steps.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Devices with a larger register map need their own regmap_config so
debugfs register access stays within each device's address range.
Move the config into the chip_info table and let probe pass the per-chip
config. All current devices share the same config, so no functional
change.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Devices with a multi-bank register map repeat the same configuration
across several banks, which the hardcoded register addresses in
ad3530r_setup() cannot cover.
Move the addresses into per-chip arrays and add ad3530r_set_reg_bank_bits()
and ad3530r_write_reg_banks() to apply an operation to every bank. Each
current device has a single bank, so no functional change.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The software LDAC trigger register is stored in the chip_info table as a
fixed register address. Devices with a multi-bank register architecture
select the trigger register based on the channel being updated, which a
single static address cannot express.
Convert sw_ldac_trig_reg into a function pointer that returns the
trigger register for a given channel, mirroring the input_ch_reg
callback.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The AD3532R/AD3532 is a 16-channel version of the AD3530R/AD3530.
This adds compatible strings for the AD3532R/AD3532.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Add a new powerdown mode for DACs with 10kohm resistor to GND.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The driver has a match table for the usb bus wired into its driver
structure, but the table is not exported with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE() entry so module alias information
is generated for automatic module loading.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704151730.42772-1-pengpeng@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
al3010_scales[] encodes the highest gain range as {0, 1187200}.
For IIO_VAL_INT_PLUS_MICRO, the fractional part must be less than
1000000, so the scale 1.1872 should instead be represented as
{ 1, 187200 }.
Since write_raw() compares the value from userspace against this
table, writing the advertised 1.1872 scale never matches the malformed
entry and returns -EINVAL. As a result, the highest gain range cannot
be selected. Reading the scale in that state also reports the malformed
value.
Fixes: c36b5195ab70 ("iio: light: add Dyna-Image AL3010 driver")
Signed-off-by: Vidhu Sarwal <vidhu.linux@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The original code was using ndelay() twice. In one case the delay
is calculated as 1/3 of ADC clock and in the other as 80 ADC clocks.
But according to the comments in all cases it should be a multiplier
of the ADC clock, and not a fraction of it. Inadvertently
nxp_sar_adc_wait_for() takes the wrong case and spread it over
the code make it wrong in all places. Fix this by modifying a helper
to correctly use the multiplier.
Fixes: 7e5c0f97c66a ("iio: adc: nxp-sar-adc: Avoid division by zero")
Fixes: 4434072a893e ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260416090122.758990-1-andriy.shevchenko%40linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stepan Ionichev <sozdayvek@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
When devm_request_threaded_irq() fails, probe logs the error and
then returns -EINVAL, dropping the real error code and breaking the
deferred-probe flow for -EPROBE_DEFER.
Return ret directly; the IRQ subsystem already prints on failure.
Fixes: 2335f0d7c790 ("iio: light: Added AMS tsl2591 driver implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Timestamps are made by measuring the chip clock using the watermark
interrupts. If we read more than watermark samples as done today, we
are reducing the period between interrupts and distort the time
measurement. Fix that by reading only watermark samples in the
interrupt case.
Fixes: 7f85e42a6c54 ("iio: imu: inv_icm42600: add buffer support in iio devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The MSR address has one 0 too many: 0xc00100010 → 0xc0010010.
Signed-off-by: Cédric Hannotier <hannotiercedric@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260704125516.49944-1-hannotiercedric@gmail.com
|
|
Add auto counter reload sampling test to verify that the intended event
records can be captured and the self-reloaded events won't generate any
records.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Update definitions for the following events.
* PMCx00A - Fix descriptions
* PMCx00C - Add missing unit masks
* PMCx00D - Add missing unit masks and fix descriptions
* PMCx013 - Fix incorrect unit masks
Fixes: 2f42fb0661d9 ("perf vendor events amd: Add Zen 6 core events")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Update definitions for the following events.
* PMCx00A - Add missing unit masks
* PMCx00B - Add missing unit masks and fix descriptions
* PMCx00C - Add missing unit masks
* PMCx00D - Add missing unit masks
* PMCx025 - Add missing unit masks and fix descriptions
Fixes: 45c072f2537a ("perf vendor events amd: Add Zen 5 core events")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix PKEY_VERIFYPROTK ioctl key type handling by removing the generic
key-length based type check with its wrong bit-size calculation, and
leaving protected key verification to the pkey handler
- Fix monwriter buffer reuse by rejecting records that change the data
length, preventing out of bounds user copy into the kernel buffer
* tag 's390-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/monwriter: Reject buffer reuse with different data length
pkey: Move keytype check from pkey api to handler
|
|
Making [parts of] the heap executable is dangerous and is blocked by
SELinux on Fedora/RHEL even for an unconfined user. Replace the malloc()
+ mprotect() combo with just mmap(), creating a private anonymous rwx
mapping, which only requires the more commonly allowed "execmem"
permission under SELinux (things like JIT or regex compilation need it
as well). mmap() with MAP_ANONYMOUS will give us a zeroed mapping that
begins on a page boundary, so the result is equivalent to the original
code even without a memset() or the page-alignment dance.
Verified that the test still passes on a machine with an AMD CPU that
has the "ibs" CPU flag.
Fixes: 35db59fa8ea2 ("perf test amd ibs: Add sample period unit test")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer.
* tag 'mips-fixes_7.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: configs: Enable the current Ingenic USB PHY symbol
MIPS: loongson64: add IRQ work based on self-IPI
MIPS: mm: Add check for highmem before removing memory block
mips: Add build salt to the vDSO
MIPS: DEC: Ensure RTC platform device deregistration upon failure
|
|
The amd_uncore driver currently does not validate event groups and
allows creation of groups with more events than the number of available
hardware counters. Because of this, pmu->event_init() succeeds but
counter assignment fails later in pmu->add() which returns -EBUSY once
all counters are exhausted.
Address this by introducing group validation in the pmu->event_init()
path. Since the uncore PMUs have no per-event constraints and all
counters of a PMU are interchangeable, validation is reduced to just
counting the group members that target a PMU and ensuring that they fit
within the available set of counters.
Fixes: c43ca5091a37 ("perf/x86/amd: Add support for AMD NB and L2I "uncore" counters")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/750877d66e208603c3047f13eed6399625d43969.1782884387.git.sandipan.das@amd.com
|
|
Adding tests for forked/cloned optimized uprobes and make
sure the child can properly execute optimized probe for
both fork (dups mm) and clone with CLONE_VM.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20260703114917.238144-14-jolsa@kernel.org
|
|
The uprobe nop5 optimization used to replace a 5-byte NOP with a 5-byte
CALL to a trampoline. The CALL pushes a return address onto the stack at
[rsp-8], clobbering whatever was stored there.
On x86-64, the red zone is the 128 bytes below rsp that user code may use
for temporary storage without adjusting rsp. Compilers can place USDT
argument operands there, generating specs like "8@-8(%rbp)" when rbp ==
rsp. With the CALL-based optimization, the return address overwrites that
argument before the BPF-side USDT argument fetch runs.
Add two tests for this case. The uprobe_syscall subtest stores known values
at -8(%rsp), -16(%rsp), and -24(%rsp), executes an optimized nop10 uprobe,
and verifies the red-zone data is still intact. The USDT subtest triggers a
probe in a function where the compiler places three USDT operands in the
red zone and verifies that all 10 optimized invocations deliver the expected
argument values to BPF.
On an unfixed kernel, the first hit goes through the INT3 path and later
hits use the optimized CALL path, so the red-zone checks fail after
optimization.
[ updates to use nop10 ]
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20260703114917.238144-13-jolsa@kernel.org
|
|
Adding reattach tests for uprobe syscall tests to make sure
we can re-attach and optimize same uprobe multiple times.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20260703114917.238144-12-jolsa@kernel.org
|
|
Changing uprobe/usdt trigger bench code to use nop10 instead
of nop5. Also changing run_bench_uprobes.sh to use nop10 triggers.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20260703114917.238144-11-jolsa@kernel.org
|
|
Optimized uprobes are now on top of 10-bytes nop instructions,
reflect that in existing tests.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20260703114917.238144-10-jolsa@kernel.org
|
|
Syncing latest usdt.h change [1].
Now that we have nop10 optimization support in kernel, let's emit
nop,nop10 for usdt probe. We leave it up to the library to use
desirable nop instruction.
[1] https://github.com/libbpf/usdt/commit/9018f82577d1dad7ed628d9efdaffc09f8f2241b
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20260703114917.238144-9-jolsa@kernel.org
|
|
In the previous optimized uprobe fix we changed the syscall
error used for its detection from ENXIO to EPROTO.
Changing related probe_uprobe_syscall detection check.
Fixes: 05738da0efa1 ("libbpf: Add uprobe syscall feature detection")
Fixes: 554ba38456da ("uprobes/x86: Move optimized uprobe from nop5 to nop10")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://patch.msgid.link/20260703114917.238144-8-jolsa@kernel.org
|
|
We now expect nop combo with 10 bytes nop instead of 5 bytes nop,
fixing has_nop_combo to reflect that.
Fixes: 41a5c7df4466 ("libbpf: Add support to detect nop,nop5 instructions combo for usdt probe")
Fixes: 554ba38456da ("uprobes/x86: Move optimized uprobe from nop5 to nop10")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://patch.msgid.link/20260703114917.238144-7-jolsa@kernel.org
|
|
In rocket_job_run(), after taking an extra fence reference for
job->done_fence via dma_fence_get(), the error paths have three bugs:
- The dma_fence reference held by job->done_fence is never released,
causing a reference leak.
- pm_runtime_get_sync() increments the usage counter even on failure,
but the error path does not decrement it, leaking the runtime PM
reference and preventing the NPU from suspending.
- A valid but unsignaled fence is returned to the DRM scheduler,
which triggers WARN("Fence ... released with pending signals!")
when the scheduler drops its reference.
Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get()
which auto-balances the usage counter on failure, releasing both fence
references on error, and returning ERR_PTR(ret) instead of the
unsignaled fence.
Cc: stable@vger.kernel.org
Fixes: 0810d5ad88a1 ("accel/rocket: Add job submission IOCTL")
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Link: https://lore.kernel.org/r/20260610071045.3414828-1-zhaojinming@uniontech.com
[tomeu: Refactored error paths to use consolidated goto labels]
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
|
|
rocket_job_push() allocates a temporary array to hold all input and
output GEM object pointers:
bos = kvmalloc_array(job->in_bo_count + job->out_bo_count,
sizeof(void *), GFP_KERNEL);
memcpy(bos, job->in_bos, job->in_bo_count * sizeof(void *));
memcpy(&bos[job->in_bo_count], job->out_bos, ...);
Two bugs exist:
1. Missing NULL check: if kvmalloc_array() fails, bos is NULL and
the subsequent memcpy() dereferences it, causing a kernel NULL
pointer dereference.
2. Integer overflow: in_bo_count and out_bo_count are both u32, set
directly from userspace-supplied in_bo_handle_count and
out_bo_handle_count with no prior validation. Their sum is computed
in u32 arithmetic and can wrap to a smaller value, causing the
allocation count passed to kvmalloc_array() to be smaller than
intended. Subsequent uses still operate on the original counts when
copying and locking objects, which may lead to out-of-bounds accesses
on the temporary array.
Fix by using check_add_overflow() to detect count overflow before the
allocation, and adding a NULL check on the allocation result.
Fixes: 0810d5ad88a1 ("accel/rocket: Add job submission IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://lore.kernel.org/r/20260524155716.90955-1-meatuni001@gmail.com
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
|
|
rocket_ioctl_submit_job() releases rjob through rocket_job_put() on
allocation error paths. rocket_job_cleanup() unconditionally calls
rocket_iommu_domain_put(job->domain), but job->domain is assigned only
after task copying and BO lookups. A failure before that assignment can
therefore clean up a job with a NULL domain pointer.
Take the per-file domain reference before the first error path can release
rjob. Also clear rjob->tasks after freeing it in rocket_copy_tasks(), so
the common cleanup path cannot free the task array again after a task-copy
error.
Fixes: 0810d5ad88a1 ("accel/rocket: Add job submission IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Link: https://lore.kernel.org/r/6a454b48.6a8fa39a.27019b.984b@mx.google.com
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
|
|
w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire
to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the
device. The downstream slave puts a length byte in buf[0]. The driver
then reads that many bytes into buf[1] with w1_f19_i2c_read().
buf[0] is controlled by the device and can be 0 to 255.
w1_f19_i2c_read() only rejects a zero count. The caller buffer is
I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read
run past it, up to about 222 bytes out of bounds.
The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That
check runs after master_xfer returns. By then the write is already
done. i2c-algo-bit rejects an oversize length before it copies, and
returns -EPROTO.
Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the
same way i2c-algo-bit does.
Fixes: ebc4768ac497 ("add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260629121043.199487-1-maoyixie.tju@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Convert the Texas Instruments OMAP HDQ One Wire bindings to DT schema.
During the conversion, several updates were made to reflect actual hardware
usage and resolve dtbs_check warnings:
- 'ti,hwmods' has been made optional.
- Added 'clocks' and 'clock-names' properties as they are used in actual
device trees (e.g., am437x-l4.dtsi).
- Added a second example for the AM4372 HDQ controller to demonstrate
the clock and interrupt configuration.
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260630124826.2992529-1-egbostina@gmail.com
[krzk: Rename node names to onewire to match convention, fix path in omap-hdq.rst]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
After a successful BALANCE/PARALLEL_SUBMIT extension on context
creation, error during processing of next user extension leaks
the siblings[] array. Fix that.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Cc: Faith Ekstrand <faith.ekstrand@collabora.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260701073030.44850-1-joonas.lahtinen@linux.intel.com
|
|
Avoid using intel_context_put() before intel_context_init() in
execlists_create_virtual() as the kref_put() inside would lead
to NULL deref on the IOCTL path when sched_engine allocation fails.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: 3e28d37146db ("drm/i915: Move priolist to new i915_sched_engine object")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260701114513.221254-1-joonas.lahtinen@linux.intel.com
|
|
Pull smb server fixes from Steve French:
- Fix several use-after-free races in durable handle reconnect,
supersede, and oplock handling
- Avoid holding the inode oplock lock while waiting for a lease break
acknowledgement. This removes delays of up to 35 seconds when cifs.ko
closes a deferred handle in response to a lease break
- Fix malformed security descriptor handling, including an undersized
DACL allocation issue and an out-of-bounds ACE SID read
- Fix memory leaks in security descriptor and DOS attribute xattr
encoding/decoding error paths
- Fix outstanding SMB2 credit leaks on aborted requests and correct the
QUERY_INFO credit charge calculation
- Fix hard-link creation without replacement being incorrectly rejected
when the handle lacks DELETE access
- Avoid unnecessary zeroing of large SMB2 read buffers
- Add an oplock list lockdep annotation and update the documented
support status for durable handles and SMB3.1.1 compression
- Durable handle fixes to address ownership and lifetime races during
reconnect, session teardown, oplock handling, and superseding opens,
preventing stale session and file references from being used by
concurrent operations
* tag 'v7.2-rc1-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix app-instance durable supersede session UAF
ksmbd: snapshot previous oplock state before durable checks
ksmbd: close superseded durable handles through refcount handoff
ksmbd: fix use-after-free of fp->owner.name in durable handle owner check
smb/server: do not require delete access for non-replacing links
ksmbd: don't hold ci->m_lock while waiting for a lease break ack
ksmbd: doc: update feature support status for durable handles and compression
ksmbd: annotate oplock list traversals under m_lock
ksmbd: fix outstanding credit leak on abort and error paths
ksmbd: fix credit charge calculation for SMB2 QUERY_INFO
ksmbd: avoid zeroing the read buffer in smb2_read()
ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl
ksmbd: reject undersized DACLs before parsing ACEs
ksmbd: fix n.data memory leak in ksmbd_vfs_set_dos_attrib_xattr
ksmbd: Fix acl.sd_buf memory leak and invalid sd_size error handling
ksmbd: fix sd_ndr.data memory leak in ksmbd_vfs_set_sd_xattr
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes for drm. This is large for rc2 but it's just a lot of
small fixes across a bunch of drivers, xe, amdgpu as usual, plus some
sashiko-inspired fixes for panthor, and some dma-fence updates.
core:
- kernel doc fix
- include types.h in drm_ras.h
dma-fence:
- fix NULL ptr dereference
- use correct callback
- make dma_fence_dedup_array more robust
dp:
- handle torn down topology gracefully
- fix kernel doc
i915:
- Input validation fixes for BIOS and EDID
- Fix HDCP code buffer overflow and seq_num_v monotonic increase check
- Fix near-NULL deref in i915_active during GFP_ATOMIC exhaustion
xe:
- Wedge from the timeout handler only after releasing the queue
- Fix a NULL pointer dereference
- Remove redundant exec_queue_suspended
- RTP / OA whitelist fixes
- Return error on non-migratable faults requiring devmem
- Skip FORCE_WC and vm_bound check for external dma-bufs
- Hold notifier lock for write on inject test path
- Drop bogus static from finish in force_invalidate
- Fix double-free of managed BO in error path
- Don't attempt to process FAST_REQ or EVENT relays
- Fix NPD in bo_meminfo
- Prevent invalid cursor access for purged BOs
- Fix offset alignment for MERT WHITELST_OA_MERT_MMIO_TRG
amdgpu:
- Soc24 aborted suspend fix
- Drop unecessary BUG() and BUG_ON() from error paths
- SCPM fix
- Power reporting fix
- DCE HDR fix
- UVD boundary checks
- VCN boundary checks
- VCE boundary checks
- DCN 4.2 fixes
- Large stack allocation fixes
- Fix aperture mapping leak
- UserQ fixes
- Ignore_damage_clips fix
- ACP fixes
- DC boundary checks
- GPUVM fixes
- JPEG idle check fixes
- Userptr fix
- GC 11.7 updates
- Non-4K page fix
- SMU 13 fixes
- DP alt mode fix
amdkfd:
- Boundary checks
- CRIU fixes
amdxdna:
- fix device removal issues
- fix use after free in debug BO
imagination:
- fix double call to scheduler fini
- fix ioctl return values
- fix user array stride
virtio:
- handle EDIDs better
panthor:
- irq safe fence lock fix
- reset work fix
- fix invalid pointer
- fix iomem access in suspended state
- sched resume fix
- unplug suspend fix
- drop needless check
- eviction leak fix
- bail on group start/resume fix
- keep irqs masked
malidp:
- use clock bulk API
komeda:
- clock prepare fixes"
* tag 'drm-fixes-2026-07-04' of https://gitlab.freedesktop.org/drm/kernel: (105 commits)
drm/xe/oa: Fix offset alignment for MERT WHITELIST_OA_MERT_MMIO_TRG
drm/xe/pt: prevent invalid cursor access for purged BOs
drm/xe: fix NPD in bo_meminfo()
drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays
drm/xe/hw_engine: Fix double-free of managed BO in error path
drm/xe/userptr: Drop bogus static from finish in force_invalidate
drm/xe/userptr: Hold notifier_lock for write on inject test path
drm/xe/display: skip FORCE_WC and vm_bound check for external dma-bufs
drm/xe: Return error on non-migratable faults requiring devmem
drm/xe/rtp: Ensure locking/ref counting for OA whitelists
drm/xe/oa: (De-)whitelist OA registers on OA stream open/release
drm/xe/rtp: (De-)whitelist OA registers for all hwe's for a gt
drm/xe/rtp: Toggle 'deny' bit to (de-)whitelist OA regs
drm/xe/rtp: Save OA nonpriv registers to register save/restore lists
drm/xe/rtp: Generalize whitelist_apply_to_hwe
drm/xe/rtp: Keep track of non-OA nonpriv slots
drm/xe/rtp: Maintain OA whitelists separately
drm/xe/rtp: Fix build error with clang < 21 and non-const initializers
drm/imagination: Fix user array stride in pvr_set_uobj_array()
drm/imagination: Fix returned size for DRM_IOCTL_PVR_DEV_QUERY
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
"These fix a coding mistake in the ACPI TAD (Time and Alarm
Device) driver introduced by one of its previous updates and
get rid of the ugly #ifdef __KERNEL__ conditional compilation
in acpi_ut_safe_strncpy() by redefining that function as an
alias for strscpy_pad():
- Add a missing ACPI_TAD_AC_WAKE capability check omitted by mistake
to the ACPI TAD driver (Xu Rao)
- Define acpi_ut_safe_strncpy() as an alias for strscpy_pad()
which is viable because that function is only called from kernel
code (Rafael Wysocki)"
* tag 'acpi-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Define acpi_ut_safe_strncpy() as strscpy_pad() alias
ACPI: TAD: Check AC wake capability before enabling wakeup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix a crash when a kretprobe reads from the stack
- Fix an issue with the build-time mcount sorter that broke ftrace
- Fix the rv32 IRQ stack frame padding to match the ABI
- Only defer IOMMU configuration during initialization. This avoids an
issue where IOMMU configuration could be indefinitely deferred
- Add the missing build salt to the vDSO
- Now that RISC-V systems with higher numbers of cores are starting to
become available, raise NR_CPUS for RISC-V to 256
- Clean up some warnings from sparse caused by the RISC-V-optimized
RAID6 code
- Clean up our __cpu_up() code with a few minor fixes
* tag 'riscv-for-linus-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: probes: save original sp in rethook trampoline
riscv: Fix 32-bit call_on_irq_stack() frame pointer ABI
scripts/sorttable: Handle RISC-V patchable ftrace entries
riscv: smp: use secs_to_jiffies in __cpu_up
ACPI: RIMT: Only defer the IOMMU configuration in init stage
riscv: Add build salt to the vDSO
raid6: fix raid6_recov_rvv symbol undeclared warning
raid6: fix riscv symbol undeclared warnigns
riscv: Raise default NR_CPUS for 64BIT to 256
|
|
Pull smb client fixes from Steve French:
- Credit fix
- Fix alignment issue in parse_posix_ctxt
- SID parsing fix
* tag 'v7.2-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix missing credit release on failure in cifs_issue_read()
cifs: update internal module version number
smb: client: use unaligned reads in parse_posix_ctxt()
smb: client: harden POSIX SID length parsing
|
|
Add a CoreSight shell test for synthesized callchains.
The test uses the new callchain workload to generate trace and decodes
it with synthesis callchain. It then verifies that the instruction
samples show the expected callchain push and pop.
Use control FIFOs so tracing starts only around the workload, which
keeps the trace data small. The test is limited to with the cs_etm
event available and root permission.
After:
perf test 138 -vvv
138: CoreSight synthesized callchain:
---- start ----
test child forked, pid 35581
Callchain flow matched:
l1=4642868 l2=4642880 l3=4642895 l4=4642919 l5=4670494 l6=4670500 l7=4670520
---- end(0) ----
138: CoreSight synthesized callchain : Ok
Assisted-by: Codex:GPT-5.5
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
CS ETM already records branches into the thread stack, but instruction
samples do not carry synthesized callchains. It misses to support the
callchain and no output with the itrace option 'g'.
Allocate a callchain buffer per queue and use thread_stack__sample()
when synthesizing instruction samples.
Advertise PERF_SAMPLE_CALLCHAIN on the synthetic instruction event.
Allocate one extra callchain entry than requested, as the first entry
is reserved for storing context information.
cs_etm__context() is introduced for handling context packet and update
the thread info and start kernel address for frontend decoding.
After:
perf script --itrace=g16l64i1i
callchain_test 6543 [002] 1 instructions:
ffff800080010c14 vectors+0x414 ([kernel.kallsyms])
aaaad6b60784 do_svc+0x1c (/home/kernel/leoy/test_cs_callchain/callchain_test)
aaaad6b60798 print+0xc (/home/kernel/leoy/test_cs_callchain/callchain_test)
aaaad6b607b0 foo+0xc (/home/kernel/leoy/test_cs_callchain/callchain_test)
aaaad6b607c8 main+0xc (/home/kernel/leoy/test_cs_callchain/callchain_test)
ffff9325225c __libc_start_call_main+0x7c (/usr/lib/aarch64-linux-gnu/libc.so.6)
ffff9325233c call_init+0x9c (inlined)
ffff9325233c __libc_start_main_impl+0x9c (inlined)
aaaad6b60670 _start+0x30 (/home/kernel/leoy/test_cs_callchain/callchain_test)
ffff800080012290 ret_to_user+0x120 ([kernel.kallsyms])
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The perf script callindent is derived from call stack in thread context,
CS ETM ignores the requirement for callindent without pushing and poping
call stack.
Enable thread-stack when either itrace thread-stack support or last branch
entries are requested, allocate the branch stack storage accordingly, and
feed taken branches to thread_stack__event() whenever thread-stack state
is needed.
When callindent is requested, pass callstack=true to thread_stack__event()
so the common thread-stack code maintains call depth for branch samples.
Before:
perf script -F +callindent
callchain_test 6543 [002] 1 branches: main ffff93252258 __libc_start_call_main+0x78 (/usr/lib/aarch64-linux-gnu/libc.so.6)
callchain_test 6543 [002] 1 branches: foo aaaad6b607c4 main+0x8 (/home/kernel/leoy/test_cs_callchain/callchain_test)
callchain_test 6543 [002] 1 branches: print aaaad6b607ac foo+0x8 (/home/kernel/leoy/test_cs_callchain/callchain_test)
callchain_test 6543 [002] 1 branches: do_svc aaaad6b60794 print+0x8 (/home/kernel/leoy/test_cs_callchain/callchain_test)
callchain_test 6543 [002] 1 branches: vectors aaaad6b60780 do_svc+0x18 (/home/kernel/leoy/test_cs_callchain/callchain_test)
callchain_test 6543 [002] 1 branches: el0t_64_sync_handler ffff80008001159c el0t_64_sync+0x194 ([kernel.kallsyms])
callchain_test 6543 [002] 1 branches: el0_svc ffff800081829194 el0t_64_sync_handler+0x9c ([kernel.kallsyms])
callchain_test 6543 [002] 1 branches: lockdep_hardirqs_off ffff800081828794 el0_svc+0x24 ([kernel.kallsyms])
callchain_test 6543 [002] 1 branches: __this_cpu_preempt_check ffff80008182b348 lockdep_hardirqs_off+0xf0 ([kernel.kallsyms])
After:
callchain_test 6543 [002] 1 branches: main ffff93252258 __libc_start_call_main+0x78 (/usr/lib/aarch64-linux-gnu/libc.so.6)
callchain_test 6543 [002] 1 branches: foo aaaad6b607c4 main+0x8 (/home/kernel/leoy/test_cs_callchain/callchain_test)
callchain_test 6543 [002] 1 branches: print aaaad6b607ac foo+0x8 (/home/kernel/leoy/test_cs_callchain/callchain_test)
callchain_test 6543 [002] 1 branches: do_svc aaaad6b60794 print+0x8 (/home/kernel/leoy/test_cs_callchain/callchain_test)
callchain_test 6543 [002] 1 branches: vectors aaaad6b60780 do_svc+0x18 (/home/kernel/leoy/test_cs_callchain/callchain_test)
callchain_test 6543 [002] 1 branches: el0t_64_sync_handler ffff80008001159c el0t_64_sync+0x194 ([kernel.kallsyms])
callchain_test 6543 [002] 1 branches: el0_svc ffff800081829194 el0t_64_sync_handler+0x9c ([kernel.kallsyms])
callchain_test 6543 [002] 1 branches: lockdep_hardirqs_off ffff800081828794 el0_svc+0x24 ([kernel.kallsyms])
callchain_test 6543 [002] 1 branches: __this_cpu_preempt_check ffff80008182b348 lockdep_hardirqs_off+0xf0 ([kernel.kallsyms])
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Perf resets the CoreSight decoder when moving to a new AUX trace buffer,
this causes trace discontinunity globally.
For callchain synthesis, keeping thread-stack state after decoder reset
can leave stale call/return history attached to threads that are decoded
later, producing incorrect synthesized callchains.
Flush all host thread stacks after a decoder reset. When virtualization
is present, flush the guest thread stacks as well.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
CS ETM maintains its own circular array for last branch entries, with
local helpers to update, copy and reset the branch stack. This
duplicates logic already provided by the common code.
Record taken branches with thread_stack__event() and synthesize
PERF_SAMPLE_BRANCH_STACK data with thread_stack__br_sample(). This
removes the private last_branch_rb buffer and its position tracking.
This also makes the branch history state belong to the thread rather
than the trace queue. That is a better fit for CoreSight traces where
a trace queue can effectively be CPU scoped, while call/return history
is per thread.
Keep the buffer number updated via thread_stack__set_trace_nr(), which
is used when exporting samples to Python scripts. Pass callstack=false
for now; synthesized callchains are added by a later patch.
The output should remain same, except that be->flags.predicted is no
longer set. Since CoreSight trace does not provide branch prediction
information, clearing the flag avoids confusion.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This patch introduces a new function cs_etm__instr_size() to calculate
the instruction size based on ISA type and instruction address.
Given the trace data can be MB and most likely that will be A64/A32 on
a lot of platforms, cs_etm__instr_addr() keeps a single ISA type check
for A64/A32 and executes an optimized calculation (addr + offset * 4).
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
ETE shares the same packet format as ETMv4, but exception decoding
handled ETMv4 packets only. As a result, ETE exception packets were
not classified.
Recognize the ETE magic for exception number decoding.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The itrace 'c' and 'r' options request synthesized branch events for
calls and returns only. For perf script the default itrace options are
"--itrace=ce", so CS ETM should emit call branches and error events by
default.
CS ETM currently synthesizes a branch sample for every decoded taken
branch whenever branch synthesis is enabled. This produces redundant
jump and conditional branch samples.
Add a branch filter derived from the itrace calls and returns options.
When neither option is set, keep the existing behavior and synthesize all
branch samples. When calls or returns are requested, emit only branch
samples whose flags match the selected branch type, while preserving trace
begin/end markers.
Also update test_arm_coresight_disasm.sh and arm-cs-trace-disasm.py
to use the --itrace=b option for generating branch samples.
Before:
perf script -F,+flags
callchain_test 6114 [005] 331519.825214: 1 branches: tr strt jmp 0 [unknown] ([unknown]) => ffff8000803a3a68 perf_report_aux_output_id+0x50 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: call ffff8000803a3a74 perf_report_aux_output_id+0x5c ([kernel.kallsyms]) => ffff8000817f4d88 memset+0x0 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: jmp ffff8000817f4d8c memset+0x4 ([kernel.kallsyms]) => ffff8000817f4c00 __pi_memset_generic+0x0 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: jcc ffff8000817f4c1c __pi_memset_generic+0x1c ([kernel.kallsyms]) => ffff8000817f4c44 __pi_memset_generic+0x44 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: jcc ffff8000817f4c4c __pi_memset_generic+0x4c ([kernel.kallsyms]) => ffff8000817f4c5c __pi_memset_generic+0x5c ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: jcc ffff8000817f4c5c __pi_memset_generic+0x5c ([kernel.kallsyms]) => ffff8000817f4cf0 __pi_memset_generic+0xf0 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: jcc ffff8000817f4d30 __pi_memset_generic+0x130 ([kernel.kallsyms]) => ffff8000817f4d68 __pi_memset_generic+0x168 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: jcc ffff8000817f4d78 __pi_memset_generic+0x178 ([kernel.kallsyms]) => ffff8000817f4d6c __pi_memset_generic+0x16c ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: jcc ffff8000817f4d78 __pi_memset_generic+0x178 ([kernel.kallsyms]) => ffff8000817f4d6c __pi_memset_generic+0x16c ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: jcc ffff8000817f4d78 __pi_memset_generic+0x178 ([kernel.kallsyms]) => ffff8000817f4d6c __pi_memset_generic+0x16c ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: return ffff8000817f4d84 __pi_memset_generic+0x184 ([kernel.kallsyms]) => ffff8000803a3a78 perf_report_aux_output_id+0x60 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: jcc ffff8000803a3a98 perf_report_aux_output_id+0x80 ([kernel.kallsyms]) => ffff8000803a3b04 perf_report_aux_output_id+0xec ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: call ffff8000803a3b1c perf_report_aux_output_id+0x104 ([kernel.kallsyms]) => ffff8000803a38f8 __perf_event_header__init_id+0x0 ([kernel.kallsyms])
After:
callchain_test 6114 [005] 331519.825214: 1 branches: tr strt jmp 0 [unknown] ([unknown]) => ffff8000803a3a68 perf_report_aux_output_id+0x50 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: call ffff8000803a3a74 perf_report_aux_output_id+0x5c ([kernel.kallsyms]) => ffff8000817f4d88 memset+0x0 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: call ffff8000803a3b1c perf_report_aux_output_id+0x104 ([kernel.kallsyms]) => ffff8000803a38f8 __perf_event_header__init_id+0x0 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: call ffff8000803a39c0 __perf_event_header__init_id+0xc8 ([kernel.kallsyms]) => ffff800080105258 __task_pid_nr_ns+0x0 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: call ffff80008010528c __task_pid_nr_ns+0x34 ([kernel.kallsyms]) => ffff8000801d5610 __rcu_read_lock+0x0 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: call ffff8000801052b0 __task_pid_nr_ns+0x58 ([kernel.kallsyms]) => ffff800080192078 lock_acquire+0x0 ([kernel.kallsyms])
callchain_test 6114 [005] 331519.825214: 1 branches: call ffff8000801923f4 lock_acquire+0x37c ([kernel.kallsyms]) => ffff8000801d6da0 rcu_is_watching+0x0 ([kernel.kallsyms])
Fixes: b12235b113cf ("perf tools: Add mechanic to synthesise CoreSight trace packets")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
cs_etm__init_traceid_queue() allocates the frontend and decode threads,
if a later allocation fails, the error path does not drop thread
reference that was already acquired.
Release both thread pointers with thread__zput() on the error path, so
does not leak thread references or leave stale pointers behind.
Fixes: 951ccccdc715 ("perf cs-etm: Only track threads instead of PID and TIDs")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Once ads1015_probe() gets past ads1015_set_conv_mode(CONTINUOUS), two
resources leak on its error paths and on driver unbind:
- pm_runtime_enable() is left enabled if iio_device_register() fails;
on subsequent probe/rebind the runtime PM tracking complains about
an unbalanced enable.
- The CONTINUOUS conversion mode written to the chip is never restored
on any error path after that point, so on probe failure the chip is
left running.
Convert all three teardown operations of ads1015_remove() to devm so
that the error paths and the unbind path share the same unwind in
reverse-of-setup order:
- ads1015_set_conv_mode(SINGLESHOT) becomes a devm action registered
immediately after CONTINUOUS mode is enabled.
- pm_runtime_enable() becomes devm_pm_runtime_enable().
- iio_device_register() becomes devm_iio_device_register(), so the
iio device is unregistered first on unbind.
ads1015_remove() is no longer needed and is dropped.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
bm1390_trigger_handler() returns from three error paths without calling
iio_trigger_notify_done(). The success path at the end does, so on a
transient regmap or read failure the trigger's use_count is never
decremented and iio_trigger_poll_chained() drops subsequent dispatches
until the trigger is reattached.
This is not a fix for a reported bug, only hardening against hardware
or bus glitches; if a glitch is persistent the device is wedged and
needs an unbind anyway, which is left to the user.
Split the function so the inner helper returns bool with the data-read
outcome, and the outer IRQ handler calls iio_trigger_notify_done()
once and reports the result via IRQ_RETVAL().
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
