| Age | Commit message (Collapse) | Author |
|---|
|
Added a new config option to allow offloading individual calls to
try_smi_init() using workqueue.
Saves 100ms on my system.
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Message-ID: <20260810074851.306979-1-mclapinski@google.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- New architecture: Alpha
- New library functionality: readlink(), getcwd()
- Various bugfixes and cleanups
* tag 'nolibc-20260814-for-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc:
tools/nolibc: add support for Alpha
tools/nolibc/powerpc: mark ctr and xer as clobbered by system call
tools/nolibc: remove dead __ARCH_WANT_SYS_OLD_SELECT
selftests/nolibc: add debug information
tools/nolibc: mark arg1 operand in __nolibc_syscall0() as write-only
selftests/nolibc: Add test for getcwd() and readlink()
tools/nolibc: unistd: Add readlink()
tools/nolibc: unistd: Add getcwd()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux
Pull liveupdate updates from Mike Rapoport:
"Kexec Handover:
- Fix size calculation in kho_preserved_memory_reserve() for
preservations larger than 2 GiB
Live Update Orchestrator:
- move liveupdate selftest utilities into a library so that selftests
of subsystems participating in liveupdate, e.g. PCI and VFIO, can
use them and drop direct ioctl calls from the tests
- add end to end liveupdate test infrastructure that allows running
the tests across a kexec in QEMU
- remove redundant INIT_LIST_HEAD in luo_session_alloc()
- remember the error status of an FLB retrieve() and return it on
subsequent attempts rather than retrying retrieve() with an FLB in
an unexpected state
- reference count the outgoing FLB so that it cannot be freed while a
caller is using it, the same way it's done for the incoming FLB
- reject nonzero reserved field in LIVEUPDATE_SESSION_FINISH so that
it can be reused by a future extension"
* tag 'liveupdate-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
kho: fix size calculation in kho_preserved_memory_reserve()
selftests/liveupdate: Move luo_test_utils.* into a reusable library
selftests/liveupdate: Use luo_test_utils.c for liveupdate ioctl APIs
liveupdate: Remember FLB retrieve() status
liveupdate: Reference count outgoing FLB data
liveupdate: reject nonzero reserved value for SESSION_FINISH
liveupdate: Remove redundant INIT_LIST_HEAD in luo_session_alloc
selftests/liveupdate: add end to end test infrastructure and scripts
|
|
Merge in late fixes in preparation for the net-next PR.
Conflicts:
drivers/dpll/dpll_core.c
drivers/dpll/dpll_netlink.c
33f016b23a219 ("dpll: fix NULL deref in dpll_device_ops() during teardown race")
b1d0c412088e3 ("dpll: add STATE_CONNECTED_OVERRIDE pin capability")
https://lore.kernel.org/aoR9YYY2P5--3x0N@sirena.org.uk
https://lore.kernel.org/aoR9VmKllVGwmQn_@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2026-08-18
The first patch is by Sean Nyekjaer, targets the tcan4x5x driver and
puts the device into sleep mode before removing the driver.
Pavel Pisa's patch fixes the colors in the documentation of the TX
buffer FSM of CTU CAN FD driver.
2 patches by Cunhao Lu add support for the rockchip 3588 SoC to the
rockchip CAN-FD driver.
Kuniyuki Iwashima contributes per-netns device unregistration for the
vxcan driver.
Eduard Bostina converts the TI HECC DT bindings doc to DT schema.
Harini T contributes 2 patches to the xilinx_can driver to document
phys and update maintainer.
A patch by bui duc phuc converts the m_can driver to use
of_property_present() for wakeup-source.
Fanbo He's patch fixes a typo in the gs_usb driver.
The last patch is by Markus Schneider-Pargmann and removed not needed
driver_data from the m_can PCI driver.
* tag 'linux-can-next-for-7.3-20260818' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: m_can: pci: Remove driver_data
drivers: gs_usb: gs_usb_probe(): fix typo in error message
can: m_can: Use of_property_present() for wakeup-source
dt-bindings: can: xilinx_can: Document phys property
dt-bindings: net: can: Convert TI HECC to DT schema
MAINTAINERS: Replace maintainer for Xilinx CAN driver
can: vxcan: support per-netns device unregistration.
docs: ctucanfd: fix swapped colors in legend for TX buffer FSM of CTU CAN FD
can: rockchip: add RK3588 CAN support
dt-bindings: can: rockchip: add rk3588 CAN-FD compatible
can: tcan4x5x: put tcan into sleep when removing driver
====================
Link: https://patch.msgid.link/20260817233420.2068204-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In aggregation mode with two identical amplifiers,
a stress test that repeatedly triggers card unbind/rebind
can hit a NULL pointer dereference during the exit path.
ctx->amp_dev1 / ctx->amp_dev2 are single shared resources,
so the release must be safe against being called more than once.
Clear each pointer after put_device() so a second invocation
becomes a no-op, this could address NULL pointer dereference issue.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/20260818023018.2564212-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux
Pull kexec updates from Mike Rapoport:
- Deduplicate crash memory allocation and the exclusion of reserved
crash kernel regions from architecture specific code into a generic
crash_prepare_headers() and enable crashkernel CMA reservation on
arm64 and riscv reservation on arm64 and riscv.
- Skip purgatory checksum verification when the kexec segments cannot
be corrupted by DMA, which saves about 250ms on kexec.
- Replace __ASSEMBLY__ with the compiler provided __ASSEMBLER__ in
include/linux/kexec.h.
- Fix a keyring refcount imbalance in the kdump kernel's dm-crypt key
restore path, which over-dropped the user keyring reference when
more than one key was restored.
* tag 'kexec-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
crash_dump: release keyring reference at the correct time
kexec: Replace __ASSEMBLY__ with __ASSEMBLER__ in header file
kexec_file: skip checksum verification when safe
riscv: kexec_file: Add support for crashkernel CMA reservation
arm64: kexec_file: Add support for crashkernel CMA reservation
powerpc/kexec_file: Use crash_exclude_core_ranges() helper
LoongArch: kexec_file: Use crash_prepare_headers() helper to simplify code
riscv: kexec_file: Use crash_prepare_headers() helper to simplify code
x86/crash: Use crash_prepare_headers() helper to simplify code
arm64: kexec_file: Use crash_prepare_headers() helper to simplify code
crash: Add crash_prepare_headers() to exclude crash kernel memory
powerpc/crash: sort crash memory ranges before preparing elfcorehdr
riscv: kexec_file: Fix crashk_low_res not exclude bug
|
|
David Heidelberg says:
====================
NFC updates for net-next 2026-08-17
Improvements:
nxp-nci: Add remove on IRQ error
mrvl: spi: Unregister dev on allocation fail
Cleanups:
Drop __maybe_unused from acpi_device_id tables
Drop unused assignment of acpi_device_id driver data
Initialize acpi_device_id arrays using member names
Unify style of acpi_device_id arrays
Initialize mei_cl_device_idarrays using member names
Drop __maybe_unused from of_device_id tables
Unify style of of_device_id arrays
Drop unused assignment of spi_device_id driver data
Initialize spi_device_idarrays using member names
Unify style of spi_device_id arrays
Unify style of usb_device_id arrays
pn544: Drop empty line between i2c_device_id array and MODULE_DEVICE_TABLE()
trf7970a: Use NULL when no response is expected
Modernization:
st95hf: switch to using sleeping variants of gpiod API
Others:
MAINTAINERS: Add Matrix channel to the NFC subsystem
pn533: fix memcpy overflow warning
* tag 'nfc-net-next-20260817' of https://codeberg.org/linux-nfc/linux:
nfc: st95hf: switch to using sleeping variants of gpiod API
MAINTAINERS: Add Matrix channel to the NFC subsystem
nfc: Unify style of usb_device_id arrays
nfc: Unify style of spi_device_id arrays
nfc: Initialize spi_device_idarrays using member names
nfc: Drop unused assignment of spi_device_id driver data
nfc: Unify style of of_device_id arrays
nfc: Drop __maybe_unused from of_device_id tables
nfc: Initialize mei_cl_device_idarrays using member names
nfc: pn544: Drop empty line between i2c_device_id array and MODULE_DEVICE_TABLE()
nfc: Unify style of acpi_device_id arrays
nfc: Initialize acpi_device_id arrays using member names
nfc: Drop unused assignment of acpi_device_id driver data
nfc: Drop __maybe_unused from acpi_device_id tables
nfc: nxp-nci: Add remove on IRQ error
nfc: mrvl: spi: Unregister dev on allocation fail
nfc: trf7970a: Use NULL when no response is expected
nfc: pn533: fix memcpy overflow warning
====================
Link: https://patch.msgid.link/7fc49075-884e-4284-b742-7057cbba4b17@ixit.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
invert might have both WCI/BCI mask, but regmap_update_bits() masks
BCI only. It needs both mask. Fixup it.
static int max98926_dai_set_fmt(...)
{
...
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_NB_IF:
=> invert = MAX98926_DAI_WCI_MASK;
break; ^^^^^^^^^^^^^^^^^^^^^
case SND_SOC_DAIFMT_IB_NF:
=> invert = MAX98926_DAI_BCI_MASK;
break; ^^^^^^^^^^^^^^^^^^^^^
case SND_SOC_DAIFMT_IB_IF:
=> invert = MAX98926_DAI_BCI_MASK | MAX98926_DAI_WCI_MASK;
break; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
default:
...
}
...
regmap_update_bits(max98926->regmap, MAX98926_FORMAT,
MAX98926_DAI_BCI_MASK, invert);
... ^^^^^^^^^^^^^^^^^^^^^
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87wltomc97.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When hardware GRO (SHAMPO) coalesces a small IPv4/TCP segment that was
padded up to the 60-byte minimum Ethernet frame, the trailing padding is
folded into the merged payload causing padding to be delivered
to the user as payload.
Detecting and reproducing the issue: the selftest
tools/testing/selftests/drivers/net/gro.py subtest
hw_ipv4_data_lrg_1byte sends {100, 1} expecting to receive {101}.
In current code, it receives {106} (100 + 1 payload + 5 pad) instead.
This patch avoids giving the user padding as payload by simply not
coalescing small packets (which fails the subtest; the same approach
and behavior as sw gro). This gains code simplicity at the cost of
more computation (passing an extra skb up the stack) for small packets
that could be coalesced.
The threshold is chosen as ETH_ZLEN + 2 * VLAN_HLEN. This is the largest
frame that may still contain minimum-frame padding (+ 2 VLAN tags), so
anything larger is safe to consider for coalesce. (We do not include
ETH_FCS_LEN in that threshold computation as netdev_fix_features()
drops NETIF_F_GRO_HW whenever NETIF_F_RXFCS is set, so retained FCS
can't reach this path.)
Fixes: 92552d3abd32 ("net/mlx5e: HW_GRO cqe handler implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Glenn Judd <gmj@meta.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260816064259.3279548-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ovs_ct_init() acquires a connlabels reference before initializing the
conntrack limit state. If ovs_ct_limit_init() fails, its error is returned
directly. The pernet core does not invoke the exit callback for the
operation whose initialization failed, so ovs_ct_exit() cannot drop the
reference.
This leaves labels_used elevated when Open vSwitch pernet registration
fails for an existing network namespace. Subsequent conntrack entries in
that namespace may allocate label extensions even though Open vSwitch
failed to register.
Drop the connlabels reference before returning a conntrack limit
initialization error. ovs_ct_limit_init() already releases its partial
state, and the original error remains unchanged.
This issue was found by a static analysis checker and confirmed by
manual source review.
Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit")
Cc: stable@vger.kernel.org
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260815151729.3757984-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Non-urgent fixes:
- Fix calculation of node_spanned_pages when running
with 'kernelcore=mirror'
- Properly handle failure to allocate per_cpu_nodestats
in free_area_init_core_hotplug()
- Fix deferred initialization of the memory map for
configurations where node's RAM end is not aligned
on PAGES_PER_SECTION
Cleanups:
- Remove redundant pageblock_align() call in free_unused_memmap()
- Remove unnecessary invalid range checks in users of memblock
iterators. Some users of for_each_mem_range() and
for_each_mem_pfn_range() verify that start < end for each range.
This is redundant because memblock iterators guarantee to never
return an invalid range
- Stop overlapping zones with 'kernelcore=mirror' and align behaviour
of 'kernelcore=mirror' with other variants of kernelcore and
movablecore
- Remove redundant updates of numa_nodes_parsed mask in the callers
of numa_add_memblk(), the latter always updates the mask anyway
- Remove unnecessary initialization of pgdat->per_cpu_nodestats to
NULL, the variable is reset to the actual value a few lines below"
* tag 'memblock-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: (25 commits)
mm/mm_init: deferred_grow_zone(): fix out-of-range first_deferred_pfn
mm/mm_init: remove unnecessary initialization of pgdat->per_cpu_nodestats
mm/mm_init: remove redundant memset in free_area_init()
mm: numa_memblks: use numa_add_reserved_memblk() in numa_cleanup_meminfo()
arch_numa: remove redundant node_possible_map assignment
mm: numa_memblks: remove redundant numa_nodemask_from_meminfo()
LoongArch: remove redundant numa_nodes_parsed node_set()
arch_numa: remove redundant numa_nodes_parsed node_set()
x86/numa: remove redundant numa_nodes_parsed node_set()
of/numa: remove redundant numa_nodes_parsed node_set()
ACPI: NUMA: remove redundant numa_nodes_parsed node_set()
mm: numa_memblks: set numa_nodes_parsed in numa_add_memblk()
mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug
mm/mm_init: drop overlap_memmap_init()
mm/mm_init: don't overlap NORMAL and MOVABLE zones with kernelcore=mirror
mm/hugetlb: remove unnecessary empty range check in hugetlb_bootmem_set_nodes()
mm: remove unnecessary empty range check in early_calculate_totalpages()
powerpc64/kasan: Remove unreachable invalid range check in kasan_init_phys_region()
ARM: remove unreachable invalid range check in kasan_init()
riscv: remove unreachable invalid range check in kasan_init()
...
|
|
sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/*
causes use-afer-free crash when either alloc_percpu() or dev_addr_init()
in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device
refcount tracker infrastructure") added ref_tracker_dir_exit() to only
free_netdev() path.
Closes: https://sashiko.dev/#/patchset/56c707e7-1fb0-43ec-b8fb-cf6f451e513e%40I-love.SAKURA.ne.jp
Fixes: 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/b06ce35d-e7bc-47a5-8e0a-e82be7e4dd08@I-love.SAKURA.ne.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit in the Fixes tag below made so flow->mask free is scheduled
via RCU right after it is removed from the flow table. The pointer
stays in the flow structure and it can be accessible while in the same
RCU critical section. This is done to avoid requiring ovs_mutex for
the ovs_flow_free().
However, while removing the flow during processing of CMD_DEL, we do
not take RCU read lock before the removal, and ovs_flow_cmd_fill_info()
uses the flow->mask pointer afterwards. The RCU read lock is taken,
but it's already late at that point. The comment on that line
acknowledges that the lock is cosmetic and doesn't serve a real purpose.
This leads to use-after-free if the RCU grace period passes between
removal and the filling. It is a short race window, but it is there
and can lead to a real crash in case memory allocation for the info
takes a bit longer:
BUG: KASAN: slab-use-after-free in __ovs_nla_put_key
net/openvswitch/flow_netlink.c:1996
BUG: KASAN: slab-use-after-free in ovs_nla_put_key+0x2463/0x2e30
net/openvswitch/flow_netlink.c:2250
Read of size 4 at addr ffff88801ee89970 by task ovs_flow_del_ec/9487
Call Trace:
<TASK>
__ovs_nla_put_key net/openvswitch/flow_netlink.c:1996
ovs_nla_put_key+0x2463/0x2e30 net/openvswitch/flow_netlink.c:2250
ovs_flow_cmd_fill_info+0x420/0x9c0 net/openvswitch/datapath.c:930
ovs_flow_cmd_del+0x53a/0x970 net/openvswitch/datapath.c:1467
...
netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556
</TASK>
Allocated by task 9487:
mask_alloc net/openvswitch/flow_table.c:967
flow_mask_insert net/openvswitch/flow_table.c:1012
ovs_flow_tbl_insert+0xea2/0x1a90 net/openvswitch/flow_table.c:1084
ovs_flow_cmd_new+0x7e3/0xd90 net/openvswitch/datapath.c:1086
...
netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556
Freed by task 9485:
rcu_free_sheaf+0x1e/0x100 mm/slub.c:5978
rcu_do_batch kernel/rcu/tree.c:2645
rcu_core+0x59c/0x10c0 kernel/rcu/tree.c:2897
handle_softirqs+0x1e4/0x9a0 kernel/softirq.c:622
...
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062
ovs_flow_tbl_remove() must be called after the ovs_flow_cmd_fill_info()
to avoid this race. This also helps with cleaning up the forced cast
and the cosmetic RCU read lock. Before the commit in the Fixes tag the
order did not matter as long as the flow object itself was not freed.
A wider RCU critical section could be another option, but we have a
GFP_KERNEL allocation in the way.
Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-32042.
Fixes: 56c19868e115 ("openvswitch: Make flow mask removal symmetric.")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260815005915.1097270-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sctp_endpoint_bh_rcv() looks the association up only when chunk->asoc is
NULL, and caches the result in chunk->asoc and chunk->transport without
taking a reference.
A packet that matches no association is handed to the endpoint, so a peer
can bundle COOKIE ECHO, SHUTDOWN and SHUTDOWN ACK in one packet. The
COOKIE ECHO creates the association, the SHUTDOWN chunk caches it, and
with the outqueue empty the SHUTDOWN ACK reaches sctp_sf_do_9_2_final(),
so the association and its transports are freed.
The endpoint loop has no counterpart to the asoc->base.dead check in
sctp_assoc_bh_rcv(). The next chunk writes to last_time_heard in the freed
transport and is then passed to sctp_do_sm() with the freed association.
The transport is freed through RCU, so this needs the packet to come off
the socket backlog, where the loop runs in task context.
The endpoint loop cannot do the same check: it holds no reference on the
association, so reading asoc->base.dead would itself be a use-after-free.
Mark the packet for discard in the command interpreter, just before it
deletes the association. That is also before sctp_inq_free() releases the
chunk on the association receive path.
sctp_sf_do_5_2_4_dupcook() issues SCTP_CMD_DELETE_TCB for the temporary
association, while the one the packet belongs to stays alive. A restarting
peer can bundle DATA behind its COOKIE ECHO, so compare against
chunk->asoc and leave that case alone.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/an-YYtoqw1QpTXUL@v4bel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ivan Vecera says:
====================
dpll: zl3073x: add PTP clock support
Add PTP hardware clock support to the zl3073x DPLL driver.
Patch 1 scales the poll sleep interval in zl3073x_poll_zero_u8()
proportionally to the timeout to avoid excessive bus traffic for
the longer PTP-related timeouts.
Patch 2 adds low-level channel operations for ToD read/write/adjust,
output phase step, delta frequency offset write and TIE write as
building blocks for PTP callbacks.
Patch 3 registers a PTP clock device for each DPLL channel with
gettimex64, settime64, adjtime, adjfine, adjphase and getmaxphase
callbacks. Callback availability adapts to the current channel
state - adjfine requires NCO pin connected, adjphase uses TIE write
when tracking a reference, and adjtime selects the appropriate
mechanism automatically. Periodic output support will be added in a
follow-up series.
====================
Link: https://patch.msgid.link/20260814082656.306534-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add PTP clock support for the ZL3073x DPLL driver. A PTP clock device
is registered for each DPLL channel regardless of the initial channel
state, providing gettimex64, settime64, adjtime, adjfine, adjphase
and getmaxphase callbacks.
Callback availability depends on the current channel state:
- adjfine: when NCO pin is connected (returns -EOPNOTSUPP otherwise)
- adjphase: available when tracking a reference, uses TIE write
- adjtime: always available and uses
* phase step for sub-second deltas when NCO pin is connected
* TIE write when tracking a reference
* plain ToD read-modify-write otherwise
- gettime/settime: always available
The adjtime callback splits multi-second adjustments into a ToD
read-modify-write for the seconds part and a sub-second mechanism
(phase step or TIE write) for the remainder. On partial failure
where seconds were already committed, success is returned to
prevent the PTP servo from retrying and applying seconds again.
All PTP callbacks are serialized by the existing per-DPLL zldpll->lock
mutex, which is also used by DPLL pin and device callbacks.
Reviewed-by: Petr Oros <poros@redhat.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Tested-by: Chris du Quesnay <Chris.duQuesnay@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260814082656.306534-4-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add low-level DPLL channel operations for ToD read/write/adjust,
output phase step, delta frequency offset write and TIE (Time
Interval Error) write. These serve as building blocks for the PTP
clock callbacks added in the next patch.
ToD operations use a wait-before-write pattern to avoid blocking
after each operation.
The tod_ready_wait helper selects the poll timeout based on the
current ToD command - write operations use a longer timeout (1000 ms)
than reads (30 ms).
The ToD read captures system timestamps (ptp_system_timestamp) around
the HW command and completion poll to support cross-timestamping.
The TIE write operation provides sub-picosecond resolution phase
adjustment for modes where the DPLL is tracking a reference
(AUTO and REFLOCK).
Add output step-time mask to struct zl3073x_dev and
zl3073x_dev_out_is_stepped() helper to check if an output
participates in step-time operations.
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Chris du Quesnay <Chris.duQuesnay@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260814082656.306534-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the fixed 10 us poll sleep in zl3073x_poll_zero_u8() with
timeout_us / 50, scaling the sleep interval proportionally to the
timeout for all callers.
Testing showed that existing callers (mailbox, HWREG, DF read,
frequency measurement and phase error polls with 25-50 ms timeouts)
typically completed in low hundreds of sleep cycles with the fixed
10 us interval. With the scaled interval the cycle count drops to
single digits. The longer PTP-related timeouts (up to 3000 ms for
phase step) added in the following patches benefit most, avoiding
on the order of 10^5 bus transactions per wait.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260814082656.306534-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
current_password_store() checks the password length before removing the
trailing newline, which can reject valid passwords that are exactly
->maxlen bytes long.
It also passes ->maxlen to strscpy(), which truncates passwords without
a newline.
Use strchrnul() to measure the password length up to the newline, then
copy that many bytes and add a trailing NUL terminator using strscpy().
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260818151635.37094-2-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nicolas Schier:
"Kbuild updates:
- Use --force-group-allocation when linking modules
Have the linker resolve the COMDAT groups and place their members
as regular sections instead of possibly leaving multiple copies in
the resulting modules and unnecessary group metadata.
- UAPI header files: Canonicalize __ASSEMBLER__ / __ASSEMBLY__ mixed
use to __ASSEMBLER__
There is an ongoing effort to change __ASSEMBLY__ to __ASSEMBLER__
treewide. For consistency, UAPI headers are normalised to use
__ASSEMBLER__ only. Normalisation is done in two subsequent patches
to simplify a revert in the unexpected case of a regression report.
- link-vmlinux.sh: Improve detection of third pass requirement
- modpost: Canonicalize format of warnings and errors
- Minor changes:
- Remove srctree path from CHECK output
- Set the initial value of subdir-rustflags-y
- Remove broken and unused modules.builtin(.modinfo) targets from
the top-level Makefile
- Add symbol size for kallsyms symbols that can change size
- modpost: Prevent leak when early return no suffix .o in
read_symbols()
- scripts/config: Update usage of POSIX sed
- 'make tags': Add support for rust source files and prevent
binary files from being analysed
- Several spelling mistakes and rephrasing
Kconfig updates:
- Add Julian Braha as Kconfig reviewer
- Fix submenu rendering of negative dependencies
- Minor changes:
- merge_config.sh: Keep temp file in the output dir
- Abort rather than loop for ever on EOF"
* tag 'kbuild-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (23 commits)
modpost: use mod_warn() and mod_error(), clean up logging
modpost: add module as parameter to modpost_log()
kconfig: fix submenu rendering of negative dependencies
kbuild: link-vmlinux.sh: improve detection of third pass requirement
kallsyms: add symbol size for kallsyms symbols that can change size
kbuild: fix modules.builtin(.modinfo) targets in the top-level Makefile
kbuild: set the initial value of subdir-rustflags-y
scripts/config: Use in-place editing (-i) in sed portably
scripts/config: Use POSIX standard ERE (-E) in sed
modpost: prevent leak when early return no suffix .o in read_symbols()
usr: Correct a spelling by changing a letter
fixdep: make gendered language gender-neutral
kconfig: fix minor typos in comments
scripts: fix spelling mistakes
kconfig: abort rather than loop for ever on EOF
scripts/tags.sh: Add support for rust source files
scripts/tags.sh: Prevent binary files appearing in cscope.files
MAINTAINERS: add Julian Braha as Kconfig reviewer
scripts: headers_install.sh: Normalize __ASSEMBLY__ to __ASSEMBLER__
scripts: headers_install.sh: Normalize __ASSEMBLER__ to __ASSEMBLY__
...
|
|
vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock
ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the
page read-only and then upgrade it to writable with mprotect(), after
which the guest can corrupt the host-written timekeeping data (sequence
counter, UTC time, TSC offset) that the vmclock ABI defines as read-only.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 does for its read-only objects and as fixed in drm/vc4
(CVE-2026-68445) and drm/panthor (CVE-2024-53071).
Cc: stable@vger.kernel.org
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Signed-off-by: Abdifatah Suruur <suruurism@gmail.com>
Link: https://patch.msgid.link/20260813174707.14809-1-suruurism@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip_do_fragment() subtracts the IPv4 header length from the effective
MTU and passes the resulting payload MTU to ip_frag_next().
If the effective MTU is smaller than hlen + 8, ip_frag_next() rounds
the fragment payload length down to zero. The fragmentation state then
never makes forward progress: state->left, state->ptr and state->offset
stay unchanged while ip_do_fragment() keeps allocating and transmitting
header-only fragments until the softlockup detector fires.
This is reproducible with a route installed using "mtu lock 20", but it
is also reproducible without route MTU lock, for example by forwarding a
packet to a device whose MTU is 20.
Fix it in ip_do_fragment() by rejecting mtu < hlen + 8 with -EMSGSIZE,
matching the existing IPv6 fragmentation check.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Yong Wang <edragain@163.com>
Signed-off-by: Ren Wei <weir@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/8809ef6314b98913681b0b370a05a85c2b6cd579.1786599079.git.edragain@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Empty NLA_NESTED attributes are valid, and bonding uses them to clear
the ARP and NS target lists. When either target attribute is empty,
nla_for_each_nested() does not execute, so err retains an uninitialized
value before it is tested. The request can consequently return an
unpredictable error after clearing the targets.
Initialize err to zero so an empty target list completes successfully.
Non-empty lists still propagate errors from __bond_opt_set() unchanged.
This issue was found by a static analysis checker and confirmed by manual
source review.
Fixes: 4fb0ef585eb2 ("bonding: convert arp_ip_target to use the new option API")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260813153126.3952893-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These include an introduction of Intel Directed Package Thermal
Interrupt support into the thermal throttling driver for Intel
processors, probe failure code path fixes and code cleanups in Intel
thermal drivers, a thermal core fix related to hwmon, a sysfs-related
cleanup of that code, and a thermometer utility fix:
- Add support for the Directed Package-level Thermal Interrupt to the
Intel thermal throttling driver to allow package-level thermal
interrupts to go to one specific CPU in a processor package instead
of going to all of the CPUs in it (Ricardo Neri)
- Remove hwmon class devices created for thermal zones when the
thermal zone devices holding them are removed (Rafael Wysocki)
- Use sysfs_emit_at() in trans_table_show() (Thorsten Blum)
- Clean up RFIM groups on DVFS failure and clean up ODVP on probe
failures in the int340x thermal driver (Pengpeng Hou)
- Remove redundant dev_err() from the int340x thermal driver and the
bxt_pmic driver (Pan Chuang)
- Simplify ptc_temperature_write() in the int340x thermal driver by
using kstrtou32_from_user() (Dmitry Antipov)
- Close fd on realloc() failure in the thermometer utility (Amarjeet)"
* tag 'thermal-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: hwmon: Remove hwmon class device along with its parent
thermal: sysfs: Use sysfs_emit_at() in trans_table_show()
tools/thermal/thermometer: close fd on realloc() failure
thermal: intel: int340x: simplify ptc_temperature_write()
thermal: intel: bxt_pmic: Remove redundant dev_err()
thermal: intel: int340x: Remove redundant dev_err()
thermal: intel: int3400: clean up ODVP on probe failures
thermal: intel: int340x: clean up RFIM groups on DVFS failure
thermal: intel: Add a syscore shutdown callback for kexec reboot
thermal: intel: Add syscore callbacks for suspend and resume
thermal: intel: Enable the Directed Package-level Thermal Interrupt
thermal: intel: Add resources to handle directed package-level thermal interrupts
x86/thermal: Add bit definitions for Intel Directed Package Thermal Interrupt
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"As has been the case for quite some time, this set of changes is
dominated by cpufreq updates including intel-pstate and amd-pstate
driver updates, minor fixes and cleanups of other assorted cpufreq
drivers, schedutil governor updates, fixes of the Rust bindings, new
hardware support (IPQ5210 in qcom-nvmem), and some updates of self
tests related to cpufreq.
The second largest group of changes are cpuidle updates consisting of
intel_idle driver updates and ACPI processor idle driver updates, both
mostly related to ACPI _LPI support.
There are also updates related to system sleep, mostly in the
hibernation core code, two operating performance points (OPP) updates,
one runtime PM framework update, one power capping update, and some
tools updates including the addition of ACPI CPPC support to cpupower.
Specifics:
- Minor fixes and cleanups in assorted cpufreq drivers (Dan
Carpenter, Guru Das Srinagesh, Haoxiang Li, Karl Mehltretter, Sasha
Finkelstein, and Pan Chuang)
- Fix cpufreq table creation and bios_limits() callback in the Rust
bindings (Priya Bala Govindasamy)
- Add IPQ5210 support to qcom-nvmem driver (Varadarajan Narayanan)
- Adjust the .adjust_perf() cpufreq driver callback to allow the
maximum performance value to be passed to drivers and update the
intel_pstate driver to use it (Rafael Wysocki)
- Set policy->cur to the actual requested frequency in the
intel_pstate driver when the performance policy is used (Rafael
Wysocki)
- Simplify HWP handling on Broadwell processors in intel_pstate
(Rafael Wysocki)
- Fix setting minimum P-state at init time in intel_pstate (Rafael
Wysocki)
- Consolidate frequency values computation in intel_pstate and clean
up code in that driver (Rafael Wysocki)
- Add missing kernel-doc descriptions for structure and union members
in the amd-pstate driver (David Vernet)
- Handle missing policy in dynamic EPP callbacks in the amd-pstate
driver (EDAMAMEX)
- Introduce EXPORT_SYMBOL_FOR_PSTATE_UT() to export amd-pstate driver
symbols to the amd-pstate-ut subdriver (K Prateek Nayak)
- Add dynamic EPP as an "energy_performance_preference" mode in
amd-pstate, remove the "amd_dynamic_epp" kernel command line option
and the "dynamic_epp" sysfs attribute, and update the dynamic_epp
documentation accordingly (K Prateek Nayak)
- Add unit tests for CPPC Performance Priority and the "dynamic" EPP
mode in the amd-pstate driver (K Prateek Nayak)
- Set min_limit_freq based on bios_min_perf in amd-pstate and remove
the defensive check for bios_min_perf from it (K Prateek Nayak)
- Fix EPP return type and handle errors in amd-pstate during
initialization, toggle auto_sel in active mode on shared memory
systems, and cache the firmware programmed EPP value (Marco
Scardovi)
- Skip tests in amd-pstate-ut if the amd-pstate driver is not in
active use (Qianheng Peng)
- Replace sprintf() with sysfs_emit() in sysfs show in the cpufreq
schedutil governor and fix a self-contradictory comment in
sugov_iowait_apply() (Zhongqiu Han)
- Fix the usage example for the sampling_rate tunable of the ondemand
cpufreq governor in admin-guide (wangxiaodong)
- Avoid using deep idle states during initialization in the
intel_idle driver to work around device handling issues (Rafael
Wysocki)
- Fix and refactor the ACPI processor driver code related to ACPI
_LPI support and add ACPI _LPI support to intel_idle based on that
ACPI processor driver update (Rafael Wysocki)
- Backup and restore governor for cpufreq sptests (Yiwei Lin)
- Remove unnecessary sudo from quick_shuffle() and remove unused
local variables from switch_show_governor() in cpufreq selftests
(Jinseok Kim)
- Rename the PM core module parameter prefix to "pm" and allow the PM
transition (DPM) watchdog to be disabled by default (Tzung-Bi Shih)
- Fix off-by-one in wakelocks number limit check in the system sleep
sysfs interface (Haowen Tu)
- Remove kernel-doc markings from helper descriptions in the core
hibernation code (Adi Nata)
- Use %pe to print error pointer values in the hibernation core
(Ronan Marchal)
- Fix memory leak in snapshot_write_next() error path (Malaya Kumar
Rout)
- Delay allocating and linking the next swap_map_page in the
hibernation image saving code until another image page actually
needs to be recorded (Haesung Kim)
- Fix cleanup ordering around scope-based pointers in OPP (Gregor
Herburger).
- Use clk_get_optional() for optional clocks in OPP (Praveen Talari).
- Stop setting runtime_error on runtime resume callback failures to
allow drivers to recover from resume issues (Praveen Talari)
- Handle PMU registration failure during probe in the intel_rapl_tpmi
driver (Sumeet Pawnikar)
- Avoid optional imports in intel_pstate_tracer unless they are
really needed (Yousef Alhouseen)
- Add generic CPPC performance display to the cpupower utility, build
and call CPPC information on non-AMD processors, make cpupower
print kernel and hardware frequency information, and add libm to
cpupower for generic CPPC view (Jeremy Linton)
- Remove conditional return with no effect from cpupower (Sang-Heon
Jeon)"
* tag 'pm-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
cpufreq: imx6q: fix out-of-bounds write when probed more than once
cpufreq: imx6q: fix devres accumulation across driver rebind
rust: cpufreq: Fix temporary write in Registration::bios_limit_callback
rust: cpufreq: Add CPUFREQ_TABLE_END as last table entry in TableBuilder::to_table
opp: Use clk_get_optional() to avoid leaving opp_table->clk as an error pointer
intel_idle: Avoid using deep idle states during initialization
cpupower: remove conditional return with no effect
cpufreq: intel_pstate: Adjust policy->cur in active mode to policy
cpufreq/amd-pstate: Document missing kernel-doc members
cpufreq/amd-pstate-ut: Add unit test for CPPC Performance Priority
cpufreq/amd-pstate-ut: Add unit test for "dynamic" EPP mode
cpufreq/amd-pstate: Reduce the scope of exported symbols
Documentation/amd-pstate: Update dynamic_epp documentation with new behavior
cpufreq/amd-pstate: Remove "amd_dynamic_epp" cmdline and "dynamic_epp" sysfs
cpufreq/amd-pstate: Add dynamic EPP as an "energy_performance_preference" mode
cpufreq/amd-pstate: Extract platform profile to EPP conversion into a helper
cpufreq/amd-pstate: Remove the defensive check for bios_min_perf
cpufreq/amd-pstate: Set min_limit_freq based on bios_min_perf
powercap: intel_rapl_tpmi: Handle PMU registration failure during probe
PM: sleep: Allow disabling DPM watchdog by default
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support updates from Rafael Wysocki:
"The most significant change here is the elimination of struct
acpi_driver that has no more users in the tree now along with some
documentation related to it, and a follow-up update to set the "no PM"
flag for all ACPI devices that are now only going to play the role of
other devices' "companions" (in analogy with DT nodes).
There is also a significant update of irqchip code related to ACPI
done in order to enable GICv5 IWB ACPI probe ordering detection on
ARM, which involves RISC-V interrupt controller management code
refactoring to extract generic code from it into the common ACPI IRQ
code.
The rest is mostly fixes, including some fallout of the _OSC handling
rework in 7.0, ACPI CPPC library fixes, a workaround for registering
ACPI platform devices with overlapping I/O or memory resources, an
ACPI EC driver fix related to probe deferral on platforms using
HW-reduced ACPI, two ACPI battery driver fixes and a workaround for
handling model numbers with unprintable characters in it, probe error
cleanup and driver unload code path fixes, hardware error reporting
fixes, documentation fixes, and assorted code cleanups all over.
Specifics:
- Eliminate struct acpi_driver whose users have all been converted to
bind to platform devices or auxiliary devices and set the "no power
management" flag for all struct acpi_device objects (Rafael
Wysocki)
- Avoid complaints regarding missing _OSC features on platforms where
OSC_CAPABILITIES_MASK_ERROR is set in _OSC error bits even though
all of the requested features are actually acknowledged (Rafael
Wysocki)
- Avoid printing confusing _OSC messages for non-PCIe host bridges
without _OSC which is a valid configuration (Kazuma Kondo)
- Use correct region struct for BERT region size check and properly
map BERT and CCEL data to their ACPI tables (Thomas Renninger)
- Add acpi_device_clear_deps(), refactor RISC-V interrupt controller
management code to extract generic code from it into the common
ACPI IRQ code, and enable GICv5 IWB ACPI probe ordering detection
on ARM on top of that (Lorenzo Pieralisi)
- Stop using acpi_device_name() in the PNP core, stop setting
acpi_device_name/class() in the Xen variant of the ACPI PAD
(Processor Aggregator Device) driver, and make the Loongarch laptop
driver stop setting acpi_device_class() (Rafael Wysocki)
- Fix issues related to the desired_perf register access in the ACPI
CPPC library and update it to avoid unnecessary overhead (Christian
Loehle)
- Simplify acpi_get_pci_dev() with the help of a mutex guard,
introduce acpi_dev_get_pci_dev() for code that has a struct ACPI
device for which it wants to get the struct pci_dev pointer of the
associated PCI device, and use it in the ACPI video bus driver
(Rafael Wysocki)
- Avoid registering platform devices with resource overlaps in the
ACPI core device enumeration code (Rafael Wysocki)
- Clean up the list of included header files in the NHLT table parser
and validate the table and record lengths in the FPDT parser (Andy
Shevchenko and Pengpeng Hou)
- Unregister the cpufreq notifier on init failure in the ACPI
processor driver (Can Peng)
- Validate MADT IOAPIC entry bounds during IOAPIC hotplug lookup in
the ACPI processor driver (Pengpeng Hou)
- Avoid _REG disconnect on probe deferrals related to GPIO IRQ in the
ACPI EC driver (Zhu Ling)
- Update kerneldoc comments of two structures in the ACPI bus type
code to use correct struct member names to avoid warnings (Randy
Dunlap)
- Use a correct function parameter name in kernel-doc in the ACPI fan
driver (Randy Dunlap)
- Update ACPI fan IDs to follow modern style and clean up header file
inclusions in the ACPI fan driver (Andy Shevchenko)
- Use devm_acpi_install_notify_handler() to replace a custom
open-coded devres-based management of an ACPI notify handler in the
ACPI fan driver (Rafael Wysocki)
- Adjust charging status validation check in the ACPI battery driver
to avoid incorrect status reporting (Rafael Wysocki)
- Merge consecutive battery notifications in the ACPI battery driver
to reduce the pressure on STA, _BST and _BIX/_BIF ACPI control
methods and make that driver use kstrtoul() instead of
sscanf("%lu\n") (Rong Zhang)
- Sanitise model_number in the ACPI battery driver by dropping
unprintable characters (Kate Hsuan)
- Remove a node_set() call that is redundant from
acpi_parse_memory_affinity() (Sang-Heon Jeon)
- Prevent kernel-doc warnings by converting 2 function description
comments to kernel-doc format (Randy Dunlap)
- Fix docs build error in the ACPI admin-guide documentation (Randy
Dunlap)
- Replace __get_free_page() with kmalloc() in the code handling ACPI
NVS memory during system suspend/resume (Mike Rapoport)
- Fix card device cleanup on registration failure in the core PNP
code (Yuho Choi)
- Drop an unused assignment of pnp_device_id driver data (Uwe
Kleine-König)
- Clear driver_data on all paths that free acpi_pci_root in
acpi_pci_root_add() (Chen Pei)
- Add locking around evaluation of ACPI control methods in the ACPI
TAD driver to avoid race conditions (Rafael Wysocki)
- Handle repeated SEA error storms in APEI (Junhao He)
- Fix ERST timeout unit conversion in APEI (Nirmoy Das)
- Fix ARM section length accounting after header in the ACPI APEI
GHES driver (TanZheng)
- Mark ghes_in_nmi_spool_from_list() as maybe unused (Rui Qi)
- Introduce helper function acpi_dev_is_video_device() and use it in
the core ACPI device enumeration code, in the ACPI video bus
driver, in the ACPI support code for I2C, in the PCI VGA driver,
and in the x86 platform thinkpad_acpi driver (Andy Shevchenko)
- Add a quirk to use the native backlight on Acer Nitro AN515-46 to
the ACPI video bus driver (Marcos Paulo Medeiros)
- Release PCI device reference after lookup in
video_detect_portege_r100() in the ACPI video bus driver (Yuho
Choi)"
* tag 'acpi-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (61 commits)
ACPI: scan: Avoid registering platform devices with resource overlaps
ACPI: APEI: Handle repeated SEA error storms
ACPI: APEI: Fix ERST timeout unit conversion
ACPI: APEI: GHES: fix ARM section length accounting after header
ACPI: video: Release PCI device reference after lookup
ACPI: PCI: Avoid misleading _OSC messages for non-PCIe host bridges without _OSC
ACPI: TAD: Add locking around AML evaluations
ACPI: video: force native backlight on Acer Nitro AN515-46
ACPI: CPPC: Evaluate performance-control PCC use once
ACPI: CPPC: Avoid locking standalone full-width registers
ACPI: CPPC: Avoid unnecessary reads for full-width writes
ACPI: CPPC: Stop reading desired_perf in cppc_get_perf()
ACPI: CPPC: Skip desired_perf read in cppc_get_perf()
ACPI: CPPC: Reject desired_perf reads on _CPC revision 4+
ACPI: processor: Unregister cpufreq notifier on init failure
ACPI: bus: Avoid confusing complaints regarding missing _OSC features
ACPI: battery: Adjust charging status validation check
ACPI: pmtmr: Convert to kernel-doc format
ACPI: bus: Use correct struct member names
ACPI: fan: Use correct function parameter name in kernel-doc
...
|
|
The Redmibook EC/firmware fully handles the keyboard backlight cycle,
the OEM preset power mode (Fn+K) and the Fn lock toggle by itself, and
sends a WMI event carrying the resulting state in the third payload
byte. These events are currently swallowed with KE_IGNORE, so userspace
never learns that the state changed and cannot give the user any
feedback (OSD), even though the WMI event is the only notification
channel for these EC-driven changes.
Report them as key presses instead:
- keyboard backlight cycle -> KEY_KBDILLUMTOGGLE
- OEM preset power mode -> KEY_PERFORMANCE
- Fn lock toggle -> KEY_FN_ESC
Desktops that only look at the keycode get the usual hotkey behaviour;
since sparse-keymap emits MSC_SCAN with the raw payload before the key
event, an OSD daemon can additionally recover the exact new state from
byte 2 (e.g. backlight Off/Low/High/Auto is 0x00/0x05/0x0a/0x80).
Note that the power mode event must keep being read from the WMI device
in any case: on the TM2209 the ACPI event handler (EV20) applies the
mode change as a side effect of building the event payload for _WED.
Tested on Redmi Book Pro 15 2023 (TM2209).
Signed-off-by: Musaev Ibragim <atomicus.xyz@gmail.com>
Link: https://patch.msgid.link/178405473606.25865.4048095379503614221@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Replace the Intel PMC Core Driver maintainer entry with the current
maintainer email contact.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20260730210546.3936101-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
OneXPlayer X2 Mini Pro is a new Strix Halo handheld. It ships the same
system board as the OneXPlayer APEX and uses the same registers as the
OneXPlayer Fly devices. Add a quirk for it to the oxpec driver.
Signed-off-by: Jeff Hagadorn <jeff@aletheia.io>
Reviewed-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260805183102.38408-1-jeff@aletheia.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The ThinkPad Edge E330 with H3 firmware uses the non-standard EC fan
register block. Without a matching quirk, thinkpad_acpi reads the legacy
tachometer registers and reports 0 RPM.
Add the H3 BIOS family to TPACPI_FAN_NS so the driver reads the fan
period from EC register 0x95 using the existing non-standard reporting
path.
Tested on a ThinkPad Edge E330 with BIOS H3ET77WW and EC H3EC35WW.
Signed-off-by: Andrew Onyshchuk <andryk.rv@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260806154417.618575-1-andryk.rv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add the firmware string '17L1EMS1.107' to the ALLOWED_FW_13 array.
This enables Embedded Controller support, including battery charge
thresholds, for the MSI Katana GF76 11UEK (MS-17L1) laptop.
Tested on MSI Katana GF76 11UEK with EC firmware 17L1EMS1.107 and
BIOS E17L1IMS.312.
Signed-off-by: Yaroslav Dudkov <aroslavdudkov622@gmail.com>
Link: https://patch.msgid.link/20260807180553.869371-1-aroslavdudkov622@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
cert_thumbprint() already returns the accumulated output length, but
certificate_thumbprint_show() adds that value to count again, making the
next line use the wrong offset. Errors returned by cert_thumbprint() are
also ignored and their negative values added to count.
Assign the total length to count instead and propagate errors correctly.
Fixes: b49f72e7f96d ("platform/x86: think-lmi: Certificate authentication support")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260810120556.149416-2-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
rsh_log_store() calls the FIELD_PREP() macro without including the
required header file, resulting a build error:
CC drivers/platform/mellanox/mlxbf-bootctl.o
drivers/platform/mellanox/mlxbf-bootctl.c: In function ‘rsh_log_store’:
drivers/platform/mellanox/mlxbf-bootctl.c:429:16: error: implicit declaration of function ‘FIELD_PREP’ [-Wimplicit-function-declaration]
429 | data = FIELD_PREP(MLXBF_RSH_LOG_TYPE_MASK, MLXBF_RSH_LOG_TYPE_MSG);
| ^~~~~~~~~~
Fix this by including the <linux/bitfield.h> file.
Fixes: e9d1b2d0f7d0 ("mlxbf-bootctl: Add sysfs file for BlueField boot log")
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260810-mellanox_fix_implicit_declaration-v1-1-352e647b8f28@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Multi-certificate support also allows the system authentication object
to store ->signature and ->save_signature, which leak when the driver is
removed. Free the signatures to avoid leaking memory.
Fixes: 5dcb5ef12590 ("platform/x86: think-lmi: Multi-certificate support")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260810204106.165895-2-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
To be consistent with other places, add a NULL check for failed socket
loading by checking isst_common.sst_inst[].
Fixes: d805456c712f ("platform/x86: ISST: Enumerate TPMI SST and create framework")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260811222134.3912626-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If sst_add_perf_profiles() fails for memory allocation, it continues
to allow SST-CP (core-power) feature. But in practice this is not
very useful as to achieve some frequencies via SST-CP, an SST-PP
(perf-profile) level change is required.
Fixes: 0ab147bb840f ("platform/x86: ISST: Parse SST MMIO and update instance")
Cc: HyeongJun An <sammiee5311@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260811222134.3912626-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Currently only 2 features SST-TF and SST-BF are supported, so only allow
bit 0 and bit 1.
Fixes: ea009e4769fa3 ("platform/x86: ISST: Add SST-PP support via TPMI")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260811221514.3905817-7-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add check for enabled levels only when reading MMIO. Some levels can be
disabled by BIOS. If the level is not enabled, return an error.
Reset the enable and allowed level masks if there is a failure to add a
perf level.
Fixes: ea009e4769fa3 ("platform/x86: ISST: Add SST-PP support via TPMI")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260811221514.3905817-6-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Validate range for frequency and proportional priority while setting
CLOS parameters.
Fixes: 12a7d2cb811d ("platform/x86: ISST: Add SST-CP support via TPMI")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260811221514.3905817-5-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Allow only 0 or 1 for core_power enable and priority_type parameters.
Fixes: 12a7d2cb811d ("platform/x86: ISST: Add SST-CP support via TPMI")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260811221514.3905817-4-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Validate the level before setting, so that it fails early instead of
failing later when checking the bit mask for allowed levels.
Fixes: ea009e4769fa3 ("platform/x86: ISST: Add SST-PP support via TPMI")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260811221514.3905817-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Validate max CLOS ID and logical CPU ID for core power feature.
Reject any clos level or logical CPU number greater than the
supported maximum. These are used to calculate MMIO offset.
Fixes: 12a7d2cb811d ("platform/x86: ISST: Add SST-CP support via TPMI")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260811221514.3905817-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
isst_if_get_perf_level_mask() and isst_if_get_base_freq_mask() use the
user-provided level as an index into perf_levels[] via
_read_pp_level_info() and _read_bf_level_info(), but neither helper
validates it first.
The adjacent level-info helpers reject levels above max_level before
reading the same per-level register block. Add the same bounds checks to
the mask helpers, and reject disabled SST-PP levels in
isst_if_get_perf_level_mask() to match isst_if_get_perf_level_info().
This prevents out-of-bounds reads from the per-level offset table on
invalid ioctl input.
Fixes: ea009e4769fa3 ("platform/x86: ISST: Add SST-PP support via TPMI")
Fixes: 06a61df83209 ("platform/x86: ISST: Add SST-BF support via TPMI")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260807144003.3498972-3-sammiee5311@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
isst_if_clos_assoc() validates the user-supplied socket_id with
'socket_id > topology_max_packages()', but isst_common.sst_inst[] is
allocated with topology_max_packages() entries, so the valid index range
is [0, topology_max_packages()). The '>' comparison lets
socket_id == topology_max_packages() pass and index one entry past the
array.
In addition, isst_common.sst_inst[socket_id] is NULL for an in-range
package that has no bound TPMI SST instance, and the pointer is used
without a NULL check. Both the out-of-bounds entry and the NULL pointer
are then dereferenced by map_partition_power_domain_id() and the
following power_domain_info access.
Reject socket_id >= topology_max_packages() and a NULL sst_inst, matching
the checks already performed by get_instance().
Fixes: 12a7d2cb811d ("platform/x86: ISST: Add SST-CP support via TPMI")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260807144003.3498972-2-sammiee5311@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long
and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a
__u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write
to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge
unsigned value by the division and then stored into the u32 argument.
As a result a nonsensical, multi-gigawatt socket power limit is sent to
the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being
rejected.
Reject negative values with -EINVAL before the conversion.
Tested with HSMP enabled:
CAP=$(dirname $(grep -l amd_hsmp_hwmon \
/sys/class/hwmon/hwmon*/name | head -1))/power1_cap
# negative write
echo -1000000 > $CAP ; echo "ret=$?"
# valid positive write must still work
echo 400000000 > $CAP ; echo "ret=$?"
Before:
# echo -1000000 > $CAP ; echo "ret=$?"
ret=0 <- accepted; bogus limit sent to SMU
# echo 400000000 > $CAP ; echo "ret=$?"
ret=0
After:
# echo -1000000 > $CAP ; echo "ret=$?"
bash: echo: write error: Invalid argument
ret=1 <- rejected with -EINVAL
# echo 400000000 > $CAP ; echo "ret=$?"
ret=0 <- valid write still works
Fixes: 92c025db52bb ("platform/x86/amd/hsmp: Report power via hwmon sensors")
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Link: https://patch.msgid.link/20260812090012.140193-1-hemanth.selam@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The outer parsing loop in each attribute-type parser advances "elem"
(the index into the ACPI package element array) by exactly one per
iteration, but cases that consume multi-element arrays
(PREREQUISITES, ENUM_POSSIBLE_VALUES, PSWD_ENCODINGS) read "size"
consecutive elements without adjusting "elem" for the extra entries
consumed beyond the first. The next outer iteration then re-reads a
leftover element from the array just consumed instead of the next
real property, and the type check fails on that stale element,
aborting the parse with -EIO.
This produces exactly the failure visible in dmesg on the test
hardware, on every boot:
Error expected type 2 for elem 13, but got type 1 instead
hp_bioscfg: Returned error 0x3, "Invalid command value/Feature not
supported"
Fix by advancing "elem" by (size - 1) after each array-consuming
loop, so the outer loop's own "elem++" lands on the correct next
element. "eloc" is intentionally left alone: it indexes the logical
property schema, not the physical element array, and each array case
is still exactly one logical property regardless of how many physical
elements it spans.
The defect is identical across all five attribute-type parsers
(enum, integer, string, ordered-list, password), which were
copy-pasted from the same template when the driver was introduced.
Fixes: 6b2770bfd6f9 ("platform/x86: hp-bioscfg: enum-attributes")
Fixes: 6f2c06d5a467 ("platform/x86: hp-bioscfg: int-attributes")
Fixes: e6c7b3e15559 ("platform/x86: hp-bioscfg: string-attributes")
Fixes: 4b2672ec71a3 ("platform/x86: hp-bioscfg: order-list-attributes")
Fixes: 8646a3b5ee3a ("platform/x86: hp-bioscfg: passwdobj-attributes")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260812111829.172273-10-meatuni001@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The ACPI_TYPE_STRING case explicitly skips the string conversion for
elem == ORD_LIST_ELEMENTS:
if (elem != PREREQUISITES && elem != ORD_LIST_ELEMENTS) {
ret = hp_convert_hexstr_to_str(..., &str_value, &value_len);
if (ret)
continue;
}
so by the time the ORD_LIST_ELEMENTS case in the eloc switch runs,
str_value is NULL (it was freed and reset to NULL at the end of the
previous iteration). That case then does:
ret = hp_convert_hexstr_to_str(str_value, value_len, &tmpstr, &tmp_len);
hp_convert_hexstr_to_str() rejects a NULL input with -EINVAL, which
sends this function to exit_list, and exit_list unconditionally
returns 0. The net effect is that any ordered-list attribute with
elements present silently ends up with an empty elements list, with no
error surfaced anywhere.
Fix by converting the current element directly, order_obj[elem], the
same way the PREREQUISITES case already handles its own array
elements, instead of reusing the unrelated str_value/value_len left
over from earlier processing.
Fixes: 4b2672ec71a3 ("platform/x86: hp-bioscfg: order-list-attributes")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260812111829.172273-9-meatuni001@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
current_password_store() and new_password_store() both call
store_password_instance() with is_current = true:
static ssize_t new_password_store(...)
{
return store_password_instance(kobj, buf, count, true);
}
so a write to new_password is routed to current_password instead, and
the new_password field is never written by either sysfs entry point.
Fix by passing false from new_password_store(), matching what the
is_current parameter is meant to select.
Fixes: 8646a3b5ee3a ("platform/x86: hp-bioscfg: passwdobj-attributes")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260812111829.172273-8-meatuni001@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The password PSWD_ENCODINGS parser reads password_obj[elem + pos_values]
while copying the supported password encodings from the ACPI package.
The outer loop only guarantees that elem is within password_obj_count.
The encoding count is bounded by MAX_ENCODINGS_SIZE, but that does not
guarantee that the ACPI package contains enough entries for all
elem + pos_values accesses.
A malformed package can therefore declare a non-zero encoding count
without providing enough string objects, causing the parser to read past
the ACPI package array and pass an out-of-bounds string pointer and
length to hp_convert_hexstr_to_str().
Add the same computed-index bounds check used by the other offset-based
package parsing loops before reading password_obj[elem + pos_values].
Fixes: 8646a3b5ee3a ("platform/x86: hp-bioscfg: passwdobj-attributes")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260708090937.740435-1-lgs201920130244@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
