| Age | Commit message (Collapse) | Author |
|---|
|
Added match table entry on nvl machines to support HDMI-In capture
with rt5682 I2S audio codec. also added the respective quirk
configuration in rt5682 machine driver.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260806105742.2676322-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adding HDMI-In capture via I2S feature support in NVL platform.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260806105742.2676322-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The HyperX OMEN Gaming Laptop 16-ap1xxx (HP board 8F06) has an
internal digital microphone array attached to the AMD ACP PDM
controller, but the acp6x machine driver does not register the DMIC
sound card because this board is missing from the DMI quirk table,
leaving the internal microphone unusable.
Add a DMI quirk entry for the HP board "8F06" so the acp6x DMIC
capture card gets registered.
Signed-off-by: Lin Xianglin <1021538027@qq.com>
Link: https://patch.msgid.link/tencent_428392223C2AD3BF23E7ABAA7521FE5C0C07@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove invalid goto exit paths that jump across guard(mutex) cleanup
variable initialization, replace them with direct kfree(src) and return,
to fix the s390 clang build error in acoustic_ctl_write().
Fixes: d75d38dc4604 ("ASoC: tas2781: Add a debugfs node for acoustic tuning")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20260807000304.826-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Create a simple constant for the SCB alignment shift.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
The crypto control block address is required to have double word
alignment. Add a static_assert to enforce correct alignment.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[borntraeger@linux.ibm.com: improve commit message]
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Ensure that the backup info for machine check is the same offset as that
in struct sie_page!
With the assertion in place we do not need the comment anymore.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Make the code slightly more readable by using phys_to_pfn instead of an
open coded shift.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[borntraeger@linux.ibm.com: improve commit message]
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Remove useless BUILD_BUG_ON() checking the size of struct vsie_page.
This is already covered by a static_assert at the struct vsie_page
definition.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap")
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
[borntraeger@linux.ibm.com: improve commit message]
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
sclp.has_64bscao is already verified in the guard clause a few lines
above this. So we cannot reach this code if it is not true.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
This is managed by USB core and drivers aren't expected to touch it.
It should only be not NULL on a submitted URB, in which case clearing
defeats the "submitted while active" sanity check in usb_submit_urb()
and may crash the HCD handling the URB and panic the kernel.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260810075728.483c827e.michal.pecio@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some Rockchip SoCs, such as the RV1106, give each GPIO bank its own
IO control (IOC) register block rather than grouping the registers of
all banks into a shared GRF region. Add an optional rockchip,grf
property to the gpio-bank binding so that each bank node can reference
the syscon for its own IOC block.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729072727.v3.2.d04a89a3849323a0dcee2c701cba43adbb0523b2@changeid
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
scarlett2_init_notify() used mixer->urb, which
snd_usb_mixer_status_create() allocates for the UAC2 status interrupt
endpoint and mixer.c manages. On a device with that endpoint, the
"already in use" check fires on the status URB and returns 0 for
success without doing anything. No notification URB is submitted, and
cmd_done is left zeroed because it is initialised past that check and
nowhere else. scarlett2_usb_init() then issues SCARLETT2_USB_INIT_1
and wait_for_completion_timeout() would crash adding to the zeroed
wait.head.
Use a separate URB in scarlett2_data, as done for FCP, and initialise
cmd_done in scarlett2_init_private(). mixer.c was also freeing the URB
in snd_usb_mixer_free() and resubmitting it in
snd_usb_mixer_activate(), so scarlett2 must now do both: add
scarlett2_cleanup_urb(), called from private_free and private_suspend,
and a private_resume callback to re-establish the URB after resume.
scarlett2_init_notify() is reached from there, and the URB kill path
in scarlett2_notify() completes cmd_done, leaving a stale count that
would satisfy the next command's wait before the device ACKs. Use
reinit_completion() to clear it.
Also free the URB if the transfer buffer allocation fails, and both if
usb_submit_urb() fails. Move scarlett2_init_notify() up next to
scarlett2_cleanup_urb() so scarlett2_init_private() can reference it
without a forward declaration.
Fixes: 1b65088958ca ("ALSA: scarlett2: Implement handling of the ACK notification")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/ffb8ba37d5d605dfdfd8576949d67098651f9349.1786290885.git.g@b4.vu
|
|
fcp_init_notify() used mixer->urb, which snd_usb_mixer_status_create()
allocates for the optional UAC2 status interrupt endpoint and mixer.c
kills, resubmits and frees. On a device with that endpoint,
fcp_init_notify()'s "already set up" early return fires on the status
URB and returns success without doing anything. No FCP notification
URB is submitted, and cmd_done is left zeroed because it is
initialised past that early return and nowhere else. fcp_init() then
issues init1_opcode and wait_for_completion_timeout() would crash
adding to the zeroed wait.head. fcp_cleanup_urb() would also kill and
free mixer.c's status URB.
Use a separate URB in fcp_data, and initialise cmd_done in
fcp_init_private() where fcp_data is allocated. fcp_init_notify() is
reached again after suspend via fcp_reinit(), and the URB kill path in
fcp_notify() completes cmd_done, leaving a stale count that would
satisfy the next command's wait before the device ACKs. Use
reinit_completion() to clear it.
Fixes: 46757a3e7d50 ("ALSA: FCP: Add Focusrite Control Protocol driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/2cad281e6434024ca48a9ecc94fa19d6777e9be7.1786290885.git.g@b4.vu
|
|
Pull in v7.2-rc7.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
tb_dma_reserve_credits() caps the request against what the adapter has
left by decrementing one credit at a time. The other arm of the same
if() already caps with min(port->total_credits, credits); use min()
here too.
No functional change: the object code is unchanged.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Fan Ye <fy15309206903@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
v4l2_async_match_notify() creates ancillary media links before adding
asc->asc_subdev_entry to sd->asc_list.
If ancillary link creation fails, the function jumps to
err_call_unbind while asc_subdev_entry has not been linked yet. Async
connections are zero-allocated, so the list entry still has NULL next
and prev pointers on this path. Calling list_del() on it can therefore
dereference NULL instead of returning the original link creation error.
Do not delete asc_subdev_entry from err_call_unbind. There is no list
insertion to undo on this path; the bound callback and sub-device
registration are the operations that need to be rolled back.
Fixes: 28a1295795d8 ("media: v4l: async: Allow multiple connections between entities")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Originally, the ct expectation support called nf_ct_helper_ext_add() for
confirmed conntracks, which is invalid, triggering a splat. This was
fixed by commit 1710eb913bdc ("netfilter: nft_ct: skip expectations for
confirmed conntrack") which restricted it to unconfirmed conntracks.
However, early insertion of expectations into the expectations list when
the conntrack is unconfirmed leads to stale entries pointing to the
wrong hlist_head through .pprev due to ct extension reallocation.
Commit 7c9664351980 ("netfilter: move nat hlist_head to nf_conn") moved
the nat hlist_head to nf_conn for this reason:
1. ...
2. When reallocation of extension area occurs we need to fixup the
bysource hash head via hlist_replace_rcu.
I'd rather not increase the size of the struct nf_conn for this feature
has very limited scope: only one expectation can be created at a time
given expect_clash() will make nf_ct_expect_related() reports EBUSY.
For this reason, relax nf_ct_expect_related() not to drop packets in
case expectation creation fails, therefore, expectation creation becomes
best effort.
To address this issue, add an internal ct helper and attach it to the
conntrack entry to streamline the custom ct expectation support with
existing ct helpers.
Expose a new nf_conntrack_helper_release() function to release the
internal helper that is allocated and attached to the conntrack entry to
create the custom expectations. The nft_ct module removal always waits
for rcu grace period, then the NULL helper callback is observed after
this.
This patch also restricts the creation of expectations to different
helpers other than this custom helper that is created for this type of
expectations.
Fixes: 857b46027d6f ("netfilter: nft_ct: add ct expectations support")
Reported-by: Jaeyeong Lee <iostreampy@proton.me>
Link: https://patch.msgid.link/20260715144755.00ea7dfcd9f@proton.me
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Move the layer 2 encapsulation header parser out of the lookup function
to prepare for IPv4 over IPv6 and SIT.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Move the existing ipv4 and ipv6 transmit path to functions in
preparation of the IPv4 over IPv6 and SIT support.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new field to store the ethertype of the packet, skipping layer 2
encapsulation. Store the ether_type in the context after parsing the
layer 2 header for the first time and then use it later on.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
For consistency with the tun.l3proto rename, use same name field.
No functional changes are intended.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This field refers to the inner protocol that is encapsulated by the
tunnel header, just a comestic change. No functional changes are
expected.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add an ether_type field to struct net_device_path_ctx to reject IPv4
over IPv6 and vice-versa, this is currently not support. Otherwise,
incorrect dst_entry family can be reached from datapath.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Refactor dev_fill_forward_path() to take a struct net_device_path_ctx
pointer instead of a (dev, daddr) pair, so the caller can build and
populate the context up front and keep it after the forward path walk.
This allows additional fields (e.g. vlan and ether_type) to be carried
in the context and shared with ndo_fill_forward_path implementations,
instead of being reconstructed on the stack inside the core helper.
Update the mtk_ppe_offload, airoha_ppe and nf_flow_table_path callers to
allocate and fill the context before invoking dev_fill_forward_path().
The network topology resolution behaviour is unchanged.
This is a preliminary patch to enable HW flowtable offload for IPv4
over IPv6 tunnels.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Trigger a warning if nf_ct_set() overlaps an existing ct object leading
to refcount leak. Add this warning to skb_set_nfct() whose only user is
nf_ct_set() instead.
Update existing nf_ct_set() callers to use nf_reset_ct() first to clean
up stale pointer to conntrack object which migh trigger false positive
warnings.
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use IRQ_TYPE_LEVEL_MASK and IRQ_TYPE_EDGE_BOTH instead of open-coded
trigger type combinations in irqchip callbacks.
No functional change intended.
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260802-b4b4-irq-trigger-mask-gpio-v1-1-948973636c84@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal driver updates for 7.3-rc1 from Daniel Lezcano:
"- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval on
Airoha (Christian Marangi)
- Make use of the regmap API in order to support the Airoha AN7583
(Christian Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in an OF code comment (Marek Vasut)
- Remove unecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxialiary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property in
the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled with the resume operation fails on Qoriq
(Can Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after the
clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
* tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
thermal/drivers/imx: Disable clock on runtime resume failure
thermal/drivers/qcom-spmi-adc-tm5: Drop IIO_VAL_INT check in adc_tm5_get_temp
thermal/drivers/airoha: Add support for AN7583 Thermal Sensor
dt-bindings: arm: airoha: Add the chip-scu node for AN7583 SoC
thermal/drivers/airoha: Generalize get_thermal_ADC and set_mux function
thermal/drivers/airoha: Generalize probe function
...
|
|
`SpinLockIrq` and `SpinLock` use the exact same underlying C structure,
with the only real difference being that the former uses the
irq_disable() and irq_enable() variants for locking/unlocking. These
variants can introduce some minor overhead in contexts where we already
know that local processor interrupts are disabled, and as such we want a
way to be able to skip modifying processor interrupt state in said
contexts in order to avoid some overhead - just like the current C API
allows us to do.
In order to do this, we add some special functions for SpinLockIrq:
lock_with() and try_lock_with(), which allow acquiring the lock without
changing the interrupt state - as long as the caller can provide a
LocalInterruptDisabled reference to prove that local processor
interrupts have been disabled.
In some hacked-together benchmarks we ran, most of the time this did
actually seem to lead to a noticeable difference in overhead:
From an aarch64 VM running on a MacBook M4:
lock() when irq is disabled, 100 times cost Delta { nanos: 500 }
lock_with() when irq is disabled, 100 times cost Delta { nanos: 292 }
lock() when irq is enabled, 100 times cost Delta { nanos: 834 }
lock() when irq is disabled, 100 times cost Delta { nanos: 459 }
lock_with() when irq is disabled, 100 times cost Delta { nanos: 291 }
lock() when irq is enabled, 100 times cost Delta { nanos: 709 }
From an x86_64 VM (qemu/kvm) running on a i7-13700H
lock() when irq is disabled, 100 times cost Delta { nanos: 1002 }
lock_with() when irq is disabled, 100 times cost Delta { nanos: 729 }
lock() when irq is enabled, 100 times cost Delta { nanos: 1516 }
lock() when irq is disabled, 100 times cost Delta { nanos: 754 }
lock_with() when irq is disabled, 100 times cost Delta { nanos: 966 }
lock() when irq is enabled, 100 times cost Delta { nanos: 1227 }
(note that there were some runs on x86_64 where lock() on irq
disabled vs. lock_with() on irq disabled had equivalent benchmarks,
but it very much appeared to be a minority of test runs.)
While it's not clear how this affects real-world workloads yet, let's
add this for the time being so we can find out.
This makes it so that a `SpinLockIrq` will work like a `SpinLock` if
interrupts are disabled. So a function:
(&'a SpinLockIrq, &'a LocalInterruptDisabled) -> Guard<'a, .., SpinLockBackend>
makes sense. Note that due to `Guard` and `LocalInterruptDisabled`
having the same lifetime, interrupts cannot be enabled while the Guard
exists.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260807070218.27144-19-boqun@kernel.org
|
|
A variant of `SpinLock` that ensures interrupts are disabled in the
critical section. `lock()` will ensure that either interrupts are
already disabled or disable them. `unlock()` will reverse the respective
operation.
[Boqun: Port to use spin_lock_irq_disable() and
spin_unlock_irq_enable()]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260807070218.27144-18-boqun@kernel.org
|
|
No functional changes.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260807070218.27144-17-boqun@kernel.org
|
|
spin_lock_irq_disable() and spin_unlock_irq_enable() are inline
functions, to use them in Rust helpers are introduced. This is for
interrupt disabling lock abstraction in Rust.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260807070218.27144-16-boqun@kernel.org
|
|
This introduces a module for dealing with interrupt-disabled contexts,
including the ability to enable and disable interrupts along with the
ability to annotate functions as expecting that IRQs are already
disabled on the local CPU.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260807070218.27144-15-boqun@kernel.org
|
|
validate_and_copy_from_user() allocates a page to store data from
userspace via get_zeroed_page(), and then returns it as a buffer.
Neither the function itself nor its callers require struct page access.
This buffer can easily be allocated with kzalloc() as there is nothing
special about it that requires going through the page allocator.
kzalloc(), which internally reduces to kmalloc() with __GFP_ZERO,
provides a better API and kfree() does not need to know the size of the
freed object. Additionally it removes the casts of (void *) and
(unsigned long) which only obfuscate the code.
Replace get_zeroed_page() with kzalloc() and free_page() with kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com/
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The "trigger" debugfs file has a hand-rolled ->write handler
(trigger_write()) that dereferences the per-device gpio_la_poll_priv. The
file is created with debugfs_create_file_unsafe(), and the handler never
takes a debugfs reference. Nothing keeps the object alive while the
handler runs.
priv is allocated with devm_kzalloc(). devres frees it when the platform
device is unbound. debugfs_create_file_unsafe() installs no full_proxy
wrapper, so debugfs_remove_recursive() in gpio_la_poll_remove() does not
wait for an in-flight trigger_write(). The blob_lock taken there does not
help, because trigger_write() never takes it. A write that races an unbind
therefore writes into freed memory:
trigger_write() gpio_la_poll_remove()
priv = m->private
buf = memdup_user() [may sleep]
mutex_lock(&priv->blob_lock)
debugfs_remove_recursive() [no wait]
mutex_unlock(&priv->blob_lock)
(remove returns; devres frees priv)
priv->trig_data = buf <-- use-after-free write
priv->trig_len = count
The race is reachable by root via
/sys/bus/platform/drivers/gpio-sloppy-logic-analyzer/unbind.
Create "trigger" with debugfs_create_file() instead. Its full_proxy
wrapper makes debugfs_remove_recursive() drain any in-flight ->write
before it returns.
The use-after-free is confirmed under KASAN with a minimal reproducer of
the same debugfs_create_file_unsafe() plus devm_kzalloc() pattern
(available on request); it produces a slab-use-after-free write in the
handler.
Fixes: 7828b7bbbf20 ("gpio: add sloppy logic analyzer using polling")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Cengiz Can <cengiz.can@canonical.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260730220258.358169-2-cengiz.can@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
These drivers are gated by X86 but they compile on non-x86 just fine.
Add COMPILE_TEST to the menu so that these drivers can use it if they
want.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260729211001.719606-1-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Merge updates related to the ACPI video bus driver for 7.3-rc1:
- Introduce helper function acpi_dev_is_video_device() and use it in
the core ACPI device enumeration code, in the ACPI video bus driver,
in the ACPI support code for I2C, in the PCI VGA driver, and in the
x86 platform thinkpad_acpi driver (Andy Shevchenko)
- Add a quirk to use the native backlight on Acer Nitro AN515-46 to the
ACPI video bus driver (Marcos Paulo Medeiros)
- Release PCI device reference after lookup in video_detect_portege_r100()
in the ACPI video bus driver (Yuho Choi)
* acpi-video:
ACPI: video: Release PCI device reference after lookup
ACPI: video: force native backlight on Acer Nitro AN515-46
platform/x86: thinkpad_acpi: Convert to use acpi_dev_is_video_device() helper
PCI/VGA: Convert to use acpi_dev_is_video_device() helper
i2c: acpi: Convert to use acpi_dev_is_video_device() helper
ACPI: video: Convert to use acpi_dev_is_video_device() helper
ACPI: scan: Convert to use acpi_dev_is_video_device() helper
ACPI: utils: Introduce acpi_dev_is_video_device() helper
|
|
Merge an ACPI device enumeration core code update, ACPI support updates
related to PCI, an ACPI Time and Alarm Device (TAD) driver update and
ACPI APEI updates for 7.3-rc1:
- Avoid registering platform devices with resource overlaps in the ACPI
core device enumeration code (Rafael Wysocki)
- Clear driver_data on all paths that free acpi_pci_root in
acpi_pci_root_add() (Chen Pei)
- Simplify acpi_get_pci_dev() with the help of a mutex guard, introduce
acpi_dev_get_pci_dev() for code that has a struct ACPI device for
which it wants to get the struct pci_dev pointer of the associated
PCI device, and use it in the ACPI video bus driver (Rafael Wysocki)
- Avoid printing confusing _OSC messages for non-PCIe host bridges
without _OSC which is a valid configuration (Kazuma Kondo)
- Add locking around evaluation of ACPI control methods in the ACPI TAD
driver to avoid race conditions (Rafael Wysocki)
- Handle repeated SEA error storms in APEI (Junhao He)
- Fix ERST timeout unit conversion in APEI (Nirmoy Das)
- Fix ARM section length accounting after header in the ACPI APEI GHES
driver (TanZheng)
- Mark ghes_in_nmi_spool_from_list() as maybe unused (Rui Qi)
* acpi-scan:
ACPI: scan: Avoid registering platform devices with resource overlaps
* acpi-pci:
ACPI: PCI: Avoid misleading _OSC messages for non-PCIe host bridges without _OSC
ACPI: video: Use acpi_dev_get_pci_dev() instead of acpi_get_pci_dev()
ACPI: video: Drop backlight parent device reference later
ACPI: PCI: Introduce acpi_dev_get_pci_dev()
ACPI: PCI: Use a mutex guard to simplify acpi_get_pci_dev()
ACPI: PCI: Clear driver_data on all paths that free the acpi_pci_root
* acpi-tad:
ACPI: TAD: Add locking around AML evaluations
* acpi-apei:
ACPI: APEI: Handle repeated SEA error storms
ACPI: APEI: Fix ERST timeout unit conversion
ACPI: APEI: GHES: fix ARM section length accounting after header
ACPI: APEI: GHES: Mark ghes_in_nmi_spool_from_list() as maybe unused
|
|
If acpi_dev_get_resources() returns overlapping I/O or memory resources,
the subsequent registration of a platform device will fail with -EBUSY
due to a resource conflict. This is reported to happen on Acer Aspire
ES1-572 [1].
Avoid that by adjusting resources returned by acpi_dev_get_resources()
to eliminate partial overlaps between them.
This has not been regarded as necessary before because putting
overlapping resources into the _CRS of one device is really pointless,
but now that the issue has been reported to actually happen in the
field, it needs to be done.
Fixes: ab06eb920401 ("ACPI: scan: Register platform devices for fixed event buttons")
Fixes: 48fe2cddc85c ("tpm_crb: Convert ACPI driver to a platform one")
Reported-by: Julien <julien82453@gmail.com>
Tested-by: Julien <julien82453@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/linux-integrity/CAJOGg3z6LJPDsdPNBxajgy8_wQxfhYBRxe4EiurZf3kPU5A5Bw@mail.gmail.com/ [1]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ rjw: Tweaked the new message ]
Link: https://patch.msgid.link/12955541.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Suspend and resume hold channel 0's lock while saving and restoring
registers for all eight channels. Code paths using the other seven locks
can therefore run concurrently with PM.
Use one controller-wide lock shared by all channels.
Fixes: b490fa0bf86e ("gpio-ml-ioh: Fix suspend/resume issue")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/r/20260731033956.EE6F61F000E9@smtp.kernel.org
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260804095935.2132215-1-junjie.cao@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
ioh_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
ioh_irq_enable() and ioh_irq_disable() take the same lock from the
.irq_enable/.irq_disable callbacks, which are likewise invoked with
desc->lock held.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, and those critical sections only perform short
sequences of MMIO register accesses (ioread32()/iowrite32()); the
.irq_set_type callback additionally emits a dev_warn() on an unsupported
type. None of these are sleepable operations, so keeping this register
lock non-sleeping is appropriate for the irqchip callbacks and does not
change the GPIO-side locking contract.
This is the same fix as commit a02b8950d619 ("gpio: pch: use
raw_spinlock_t for the register lock"); this driver shares the same
structure as gpio-pch.
Fixes: 54be566317b6 ("gpio-ml-ioh: Support interrupt function")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260731032747.2987292-1-junjie.cao@intel.com
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current
Linux 7.2-rc7
|
|
When no stack pointer is supplied, show_stack() starts at thread.esp0.
This is the saved userspace register frame, not where a task was switched
out. For kernel threads it points to the zeroed frame created by
copy_thread(), so sched_show_task() prints no useful backtrace.
Use thread.ksp for non-current tasks. It is saved by switch_to() and is
already used by __get_wchan(). For current, start at the current stack
frame, as is already done when no task is supplied.
Tested on qemu-system-m68k -M virt using SysRq-t. All task dumps contained
resolved frames.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260723041055.47289-1-kmehltretter@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
- Drop CONFIG_CRYPTO_CAMELLIA=m, CONFIG_CRYPTO_CTS=m,
CONFIG_CRYPTO_CMAC=m, CONFIG_CRYPTO_SHA1=m, and
CONFIG_CRYPTO_SHA512=m (auto-enabled since commit bf8672b99402abd8
("SUNRPC: Add Kconfig dependency on CRYPTO_KRB5")).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/9842659245b4b16187fab67813cc98217d8a7036.1783937585.git.geert@linux-m68k.org
|
|
Remove the redundant amiga_reset() prototype and mark the first one as
__noreturn instead.
Tested-by: Daniel Palmer <daniel@thingy.jp>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260629120426.680032-4-thorsten.blum@linux.dev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
A helper function was copying a given audio infoframe into the
connector's copy but using the size of the destination (a generic
target, sized to accept many different data blocks) not the source (a
very specific type of data block). Thus, it was copying 60 bytes of
data from a 28 byte allocation.
Fix that by using the source size instead, together with a build bug
on the source size actually being smaller than the destination.
I hit this running KUnit tests under KASAN (while debugging something
else entirely). In the real world, it seems unlikely to cause an
actual problem. It is a read not a write so it can't corrupt any
memory. However, it could potentially fall off the end of a page and
cause an accvio bug.
Fixes: f378b77227bc ("drm/connector: hdmi: Add Infoframes generation")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Expósito <jose.exposito89@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: John Harrison <John.Harrison@Igalia.com>
Link: https://patch.msgid.link/20260723220652.533345-1-John.Harrison@Igalia.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Any new DTS code should pass dt-check-style 'relaxed' mode without
warnings and should have addressed most of applicable 'strict' mode
ones.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260803091740.232536-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Update the git tree URL for DMA MAPPING HELPERS to point to the
maintainer's repository on kernel.org and remove the obsolete web
page reference to the old infradead.org tree.
Reported-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
The RZ/G3E CRU programs the line stride via the AMnIS register, whose
IS field encodes the value in units of 128 bytes. If bytesperline is
not a multiple of 128, the division truncates and the hardware uses a
wrong stride, causing horizontal banding.
Commit ace92ccef0c9 ("media: platform: rzg2l-cru: Use v4l2_fill_pixfmt()")
replaced the open-coded aligned calculation with v4l2_fill_pixfmt(),
which sets no alignment, reintroducing the issue.
Round bytesperline up to RZG2L_CRU_STRIDE_ALIGN and recompute
sizeimage when info->has_stride is set. RZ/G2L has no AMnIS register
and keeps the values from v4l2_fill_pixfmt() unchanged.
Fixes: ace92ccef0c9 ("media: platform: rzg2l-cru: Use v4l2_fill_pixfmt()")
Cc: stable@vger.kernel.org
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
isys_notifier_init() calls v4l2_async_nf_init() and then adds fwnode
remote subdevs in a loop with v4l2_async_nf_add_fwnode_remote(). If an
endpoint parse or add fails partway through the loop, it jumps to
err_parse and returns without calling v4l2_async_nf_cleanup(), leaking
every v4l2_async_connection already added to the notifier's waiting
list.
The register-failure path just below already cleans up correctly, and
the caller only tears the notifier down (isys_notifier_cleanup()) once
isys_notifier_init() has returned success. Clean up the notifier on the
parse error path too.
Fixes: f50c4ca0a820 ("media: intel/ipu6: add the main input system driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
