| Age | Commit message (Collapse) | Author |
|---|
|
The Tegra I2C driver relies on runtime PM to wake up the controller before
each transfer. However, runtime PM is disabled between the system suspend
and NOIRQ suspend. If an I2C device initiates a transfer during this
window, the I2C controller fails to wake up and the transfer fails. To
handle this, the controller must be kept available for this period to
allow transfers.
Rework the I2C controller's system PM callbacks such that the controller
is resumed from runtime suspend during system suspend and it stays
RPM_ACTIVE throughout the suspend-resume cycle until it is runtime
suspended back in the system resume. The clocks are disabled in NOIRQ
suspend and enabled back in NOIRQ resume by calling the controller's
runtime PM functions directly.
Fixes: 8ebf15e9c869 ("i2c: tegra: Move suspend handling to NOIRQ phase")
Assisted-by: Cursor:claude-4.6-opus
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260518114013.62065-5-akhilrajeev@nvidia.com
|
|
Update Tegra410 I2C timing parameters based on hardware characterization
results. This adjusts the fast mode and HS mode settings to be compliant
with the I2C specification.
Fixes: 59717f260183 ("i2c: tegra: Add support for Tegra410")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260518114013.62065-4-akhilrajeev@nvidia.com
|
|
Lingfeng identified a bug and suggested two solutions, but both appear
to have issues.
Generally, we cannot release flc_lock while iterating over the file lock
list to avoid use-after-free (UAF) problems with file locks. However,
functions like nfs_delegation_claim_locks and nfs4_reclaim_locks cannot
adhere to this rule because recover_lock or nfs4_lock_delegation_recall
may take a long time. To resolve this, NFS switches to using nfsi->rwsem
for the same protection, and nfs_reclaim_locks follows this approach.
Although nfs_delegation_claim_locks uses so_delegreturn_mutex instead,
this is inadequate since a single inode can have multiple nfs4_state
instances. Therefore, the fix is to also use nfsi->rwsem in this case.
Furthermore, after commit c69899a17ca4 ("NFSv4: Update of VFS byte range
lock must be atomic with the stateid update"), the functions
nfs4_locku_done and nfs4_lock_done also break this rule because they
call locks_lock_inode_wait without holding nfsi->rwsem. Simply adding
this protection could cause many deadlocks, so instead, the call to
locks_lock_inode_wait is moved into _nfs4_proc_setlk. Regarding the bug
fixed by commit c69899a17ca4 ("NFSv4: Update of VFS byte range
lock must be atomic with the stateid update"), it has been resolved
after commit 0460253913e5 ("NFSv4: nfs4_do_open() is incorrectly triggering
state recovery") because all slots are drained before calling
nfs4_do_reclaim, which prevents concurrent stateid changes along this path.
Also, nfs_delegation_claim_locks does not cause this concurrency either
since when _nfs4_proc_setlk is called with NFS_DELEGATED_STATE, no RPC is
sent, so nfs4_lock_done is not called. Therefore,
nfs4_lock_delegation_recall from nfs_delegation_claim_locks is the first
time the stateid is set.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Closes: https://lore.kernel.org/all/20250419085709.1452492-1-lilingfeng3@huawei.com/
Closes: https://lore.kernel.org/all/20250715030559.2906634-1-lilingfeng3@huawei.com/
Fixes: c69899a17ca4 ("NFSv4: Update of VFS byte range lock must be atomic with the stateid update")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
Handle -NFS4ERR_OLD_STATEID in nfs4_layoutcommit_done().
This issue was reproduced on NFSv4.2.
Without refreshing data->args.stateid, LAYOUTCOMMIT can keep retrying
with the same stale stateid after OLD_STATEID, resulting in an
unbounded retry loop.
Refresh the layout stateid with nfs4_layout_refresh_old_stateid()
and restart the RPC only after a successful refresh.
Changes since v1: update refreshed stateid in inode layout header.
Signed-off-by: Lei Yin <yinlei2@lenovo.com>
[Anna: Fix up dprintk() format specifier]
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
watchdog_register_device() registers wdd->pm_nb when
WDOG_NO_PING_ON_SUSPEND is set, but watchdog_unregister_device() does not
remove it. This leaves an embedded notifier block on the PM notifier chain
after the watchdog device has been unregistered.
A later suspend/resume notification can then call watchdog_pm_notifier()
with a stale watchdog_device pointer, or at minimum after wdd->wd_data has
been cleared by watchdog_dev_unregister().
Unregister the PM notifier before tearing down the watchdog device.
Fixes: 60bcd91aafd2 ("watchdog: introduce watchdog_dev_suspend/resume")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://lore.kernel.org/r/20260601192005.1970805-1-dbgh9129@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
the only way parent_group is used there...
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This one *was* used - for passing it to configfs_attach_item(), which
didn't use the value passed to it.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Document the watchdog device found on the Qualcomm IPQ5210 SoC.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260511-ipq5210_wdt_binding-v1-1-859003d48274@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
That argument has been unused since the initial merge in 2005.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and do *not* do it in ->lookup() case. stat foo/bar
should not update mtime of foo, TYVM...
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert multiple functions to kernel-doc format.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix some grammar typos and bulleted kernel-doc comment format.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add comments similar to those in include/linux/watchdog.h
so that the reader/user doesn't have to dig into the API documentation
files for this.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert struct comments to correct kernel-doc format and
add one missing struct member description.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
devm_watchdog_register_device() is not documented. Add it to the current
kernel API documentation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fold into the only remaining user, don't bother with the timestamps
of parent - we are going to rmdir it shortly anyway, which will
override those.
Fix the locking of inode, while we are at it - updating the link
count and timestamps ought to be done with the inode locked.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
on the removal side we can (finally) get rid of __simple_unlink()
and __simple_rmdir() kludges now that dentries in question are
properly marked persistent - simple_unlink() and simple_rmdir()
will do the right thing for those.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
currently we have a weird situation where
* symlinks and roots of subtrees created by mkdir are pinned once
* subdirectories of subtrees created by mkdir are pinned twice
* roots of subtrees created by register_{group,subsystem} are pinned
twice.
It makes things harder to follow for no good reason. The goal is to
encapsulate the unbalanced dget/dput into d_{make,discard}_persisitent()
and, preferably, allow a use of simple_recursive_removal() or analogue
thereof. So let's regularize that and pin things only once.
create_default_group() and configfs_register_subsystem() don't need to
keep their reference around on success - configfs_create_dir() has pinned
the sucker already. So we can drop the reference passed to
configfs_create_dir() (via configfs_attach_group(), etc.) both on success
and on failure. On the removal side we no longer have the double references,
so we need an explicit dget() to compensate.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and there's no need to grab/drop it, or check for NULL - none
of the callers would even get there with NULL dentry and all of
them have the sucker pinned
Note that if sd is a directory configfs_dirent, we have sd->s_element
pointing to config_item with item->ci_dentry equal to sd->s_dentry.
Which is the only reason why detach_groups() gets away with using
the latter for locking the inode and the former for removal.
Aren't redundant data structures wonderful, for obfuscation if nothing
else?
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and deal with grabbing/dropping it in the sole caller.
After that configfs_remove_dir() becomes an unconditional call of remove_dir(),
so we can fold them together.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... where it folds with configfs_remove_dir() into a call of
configfs_detach_item(). Note that at the early failure exit
(before we'd added any children) we were not calling detach_attrs()
only because there it would've been a no-op - nothing added,
nothing there to be removed.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... where it folds with configfs_detach_item() into a call of
configfs_detach_group().
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
same story as with configfs_detach_prep() this function is undoing.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Again, the only thing it uses the argument for is its ->d_fsdata
and callers already have that - as the matter of fact, they are
passing ->s_dentry of that configfs_dirent, so that the function
could get it back as ->d_fsdata of that. With nothing else in
dentry even looked at...
configfs_dirent in question is a directory one - in this case those
are subdirectories of root (aka roots of "subsystem" trees).
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Again, the only thing it uses dentry for is dentry->d_fsdata; for the
recursive call the situation is the same as with configfs_detach_prep()
and the same observation about ->s_dentry->d_fsdata applies.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The only thing it uses the argument for is its ->d_fsdata and
all callers have that already available.
Note that in the recursive call we are dealing with a (sub)directory
configfs_dirent, and for those ->s_dentry->d_fsdata points back
to configfs_dirent itself.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Note that neither ->make_group() nor ->make_item() are allowed to modify
the string passed to them - the argument is const char *.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Having the parent directory locked protects entries from removal
by another thread, but it does *not* protect cursors from being
moved around by lseek() - or freed, for that matter.
Fixes: 6f6107640625 ("configfs: Introduce configfs_dirent_lock")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
dma_fence_unwrap_for_each() internally calls dma_fence_unwrap_first()
which does cursor->chain = dma_fence_get(head), taking an extra
reference. On normal loop completion, dma_fence_unwrap_next()
releases this via dma_fence_chain_walk() -> dma_fence_put().
When virtio_gpu_do_fence_wait() fails and the function returns early
from inside the loop, the cursor->chain reference is never released.
This is the only caller in the entire kernel that does an early return
inside dma_fence_unwrap_for_each.
Add dma_fence_put(itr.chain) before the early return.
Cc: stable@vger.kernel.org
Fixes: eba57fb5498f ("drm/virtio: Wait for each dma-fence of in-fence array individually")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260607090303.92423-1-vulab@iscas.ac.cn
|
|
On all modern platforms Qualcomm CCI controller provides two I2C masters,
and on particular boards only one I2C master may be initialized, and in
such cases the device unbinding or driver removal causes a NULL pointer
dereference, because cci_halt() is called for all two I2C masters, but
a completion is initialized only for the single enabled master:
% rmmod i2c-qcom-cci
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
<snip>
Call trace:
__wait_for_common+0x194/0x1a8 (P)
wait_for_completion_timeout+0x20/0x2c
cci_remove+0xc4/0x138 [i2c_qcom_cci]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
device_release_driver_internal+0x1c8/0x224
driver_detach+0x50/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
platform_driver_unregister+0x14/0x20
qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci]
....
Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260515234121.1607425-2-vladimir.zapolskiy@linaro.org
|
|
usr_len is read from a network-supplied message field (le16_to_cpu)
and used to compute data_len = off - usr_len without validating that
usr_len <= off. A malicious RDMA client can send usr_len > off causing
an integer underflow, resulting in data_len wrapping to a huge size_t
value which is then passed to the rdma_ev callback as a memory length,
leading to out-of-bounds memory access.
Fix by reading and validating usr_len <= off before rtrs_srv_get_ops_ids()
in both process_read() and process_write(), ensuring the early return
path acquires no reference and has no resource leak.
Link: https://patch.msgid.link/r/20260608134802.5019-1-aurelien@hackers.camp
Reported-by: Aurelien DESBRIERES <aurelien@hackers.camp>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Aurelien DESBRIERES <aurelien@hackers.camp>
Assisted-by: Claude <claude-sonnet-4-6>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A recursive locking deadlock can occur in the firmware loader's power
management notification handler.
During system suspend or hibernation preparation, fw_pm_notify() calls
device_cache_fw_images(). This function acquires fw_lock to set the
firmware cache state to FW_LOADER_START_CACHE and then iterates over all
devices using dpm_for_each_dev() while still holding the lock.
For each device, dev_cache_fw_image() schedules asynchronous work to cache
the firmware. If memory allocation for the async work entry fails (e.g., in
out-of-memory conditions), async_schedule_node_domain() falls back to
executing the work function synchronously in the current thread.
The synchronous execution path (__async_dev_cache_fw_image() ->
cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire
fw_lock again. Since the current thread already holds fw_lock, this results
in a recursive locking deadlock.
Fix this by releasing fw_lock immediately after updating the cache state
and before calling dpm_for_each_dev(). The lock is only needed to protect
the state update. Concurrent firmware requests will correctly see the
FW_LOADER_START_CACHE state and use the piggyback mechanism, which is
independently protected by its own fwc->name_lock.
Fixes: ac39b3ea73aa ("firmware loader: let caching firmware piggyback on loading firmware")
Assisted-by: Gemini:gemini-3.1-pro-preview Gemini:gemini-3-flash-preview syzbot
Reported-by: syzbot+e70e4c6f6eee43357ba7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e70e4c6f6eee43357ba7
Link: https://syzkaller.appspot.com/ai_job?id=8b4af9fd-24af-423f-8acb-1159fd34c1a5
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/48b092a5-f49d-48a4-95f4-f65bebfc6bc3@mail.kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Link: https://patch.msgid.link/20260528082110.915549-1-aaron.ma@canonical.com
|
|
create_sdw_dailinks() walks sof_dais until it finds an entry with
initialised cleared, but sof_dais is allocated with exactly num_ends
entries. If all entries are initialised, the loop reads past the end of
the array.
Pass the allocated entry count to create_sdw_dailinks() and stop before
reading past the array.
Fixes: 6d8348ddc56e ("ASoC: amd: acp: refactor SoundWire machine driver code")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Link: https://patch.msgid.link/20260528082110.915549-2-aaron.ma@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
create_sdw_dailinks() walks soc_dais until it finds an entry with
initialised cleared, but soc_dais is allocated with exactly num_ends
entries. If all entries are initialised, the loop reads past the end of
the array.
This was reported by KASAN:
BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach]
Read of size 1
Pass the allocated entry count to create_sdw_dailinks() and stop before
reading past the array.
Fixes: 2981d9b0789c ("ASoC: amd: acp: add soundwire machine driver for legacy stack")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Link: https://patch.msgid.link/20260528082110.915549-1-aaron.ma@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver uses pcim_enable_device(), so IRQ vectors are automatically
freed by devres on driver detach. The explicit pci_free_irq_vectors()
calls in the probe error path and remove function are redundant.
Drop them and the now-unused error label.
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260530-dw-pci-v1-1-5d2cf798b3c3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If DMA setup fails after allocating the zeropage, the error path frees
the page but leaves espi->zeropage dangling. A subsequent call to
ep93xx_spi_release_dma() sees the non-NULL pointer and frees the page
again.
Clear the pointer after freeing in the error path of
ep93xx_spi_setup_dma().
Fixes: 626a96db1169 ("spi/ep93xx: add DMA support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260529-ep93xx-v1-1-9185070ca1fc@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the code using guard() for mutex & spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260529103019.15233-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mt8365_afe_suspend()
mt8365_afe_suspend() allocates the register backup buffer with
devm_kcalloc(), but does not check for allocation failure before using the
returned pointer. This may lead to a NULL pointer dereference when
accessing afe->reg_back_up[i].
Add the missing NULL check and return -ENOMEM on allocation failure after
disabling the main clock.
Also propagate the return value of mt8365_afe_suspend() in
mt8365_afe_dev_runtime_suspend() so that the suspended state is not updated
when suspend fails.
Signed-off-by: Tuo Li <islituo@gmail.com>
Link: https://patch.msgid.link/20260528064107.470824-1-islituo@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Link: https://patch.msgid.link/20260602100532.6463-1-baojun.xu@ti.com
|
|
The TAS2573 belongs to the TAS257x device family, featuring an integrated
DSP and IV sensing capability.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20260602100532.6463-2-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The TAS2573 belongs to the TAS257x device family, featuring an integrated
DSP and IV sensing capability.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260602100532.6463-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
stm32f7_i2c_compute_timing() uses i2c_dev->analog_filter to pick
the analog filter delay, but i2c_dev->analog_filter is parsed from
the "i2c-analog-filter" DT property only after the compute_timing
loop in stm32f7_i2c_setup_timing(), so in practice the timing
calculations always ignore the analog filter. On an STM32MP1 board
with clock-frequency = <400000> and i2c-analog-filter set, measured
SCL frequency was ~382 kHz.
This also affects (widens) the computed SDADEL range. At high bus
clock speeds, this can select an SDADEL value that violates tVD;DAT
(data valid time).
Fix by parsing "i2c-analog-filter" before the compute_timing loop.
Fixes: 83c3408f7b9c ("i2c: stm32f7: support DT binding i2c-analog-filter")
Signed-off-by: Guillermo Rodríguez <guille.rodriguez@gmail.com>
Cc: <stable@vger.kernel.org> # v5.13+
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260526091210.20383-1-guille.rodriguez@gmail.com
|
|
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
SuperH ecovec24/7724se are the last user of Simple Audio Card as
"platform data style". It is mainly supporting "DT style" in these days.
Now, Simple Audio Card "platform data style" is no longer correctly working
during almost this 10 years. but we have not get such report.
Let's remove Sound support from SuperH ecovec24/7724se, and remove
Simple Audio Card platform data style.
Link: https://patch.msgid.link/87zf1le4fu.wl-kuninori.morimoto.gx@renesas.com
|
|
Simple-Card has created for "platform data" style first, and expanded
to "DT style". Current Simple-Card "platform data" style should not
work during almost 10 years, but no one reported it.
No one is using "platform data" style. Let's remove its support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7c9e4f4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
7724se is using Simple-Audio-Card with "platform data" style
(which is mainly supporting "DT style" today), but "platform data"
style is not working correctly working during almost 10 years.
7724se sound doesn't work in these days, and there has been no
such report. Let's remove sound support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87wlwpe4f9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Ecovec24 is using Simple-Audio-Card with "platform data" style
(which is mainly supporting "DT style" today), but "platform data"
style is not working correctly working during almost 10 years.
And DA7210 which is used in Ecovec24 was prototype version, and has
diff between production version. The driver doesn't care about it.
Ecovec24 sound doesn't work in these days, and there has been no
such report. Let's remove sound support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87y0h5e4ff.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Chancel Liu <chancel.liu@nxp.com> says:
This series adds two features to the i.MX RPMSG ASoC card:
1. Headphone jack detection via GPIO: Introduce the "hp-det-gpios"
device tree property and use simple_util_init_jack() to
register a headphone jack with GPIO-based insertion detection.
2. driver_name assignment: Set driver_name on the snd_soc_card to
"imx-audio-rpmsg", enabling userspace tools such as UCM to reliably
identify the card by driver name regardless of the board-specific
card name.
Link: https://patch.msgid.link/20260528020725.2265321-1-chancel.liu@nxp.com
|
|
Set driver_name to "imx-audio-rpmsg" for the i.MX RPMSG sound card.
This allows userspace audio configuration tools (e.g., UCM) to match
the card by driver name independently of the card name, which may vary
across board configurations.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20260528020725.2265321-4-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add headphone jack detection support for i.MX RPMSG audio cards.
When the "hp-det-gpios" property is present in the device tree node,
use simple_util_init_jack() from the ASoC simple card utilities to
register a headphone jack with GPIO-based insertion detection.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20260528020725.2265321-3-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
