| Age | Commit message (Collapse) | Author |
|---|
|
Add the rz_dmac_chan_is_paused() helper to check if the channel is paused.
This helper will be reused in subsequent patches.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260526084710.3491480-9-claudiu.beznea@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the rz_dmac_chan_is_enabled() helper to check if a channel is
enabled. This helper will be reused in subsequent patches.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260526084710.3491480-8-claudiu.beznea@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Save the start LM descriptor to avoid starting from the beginning of the
channel's LM descriptor list in rz_dmac_calculate_residue_bytes_in_vd().
This avoids unnecessary iterations.
Tested-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260526084710.3491480-7-claudiu.beznea@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a the rz_dmac_lmdesc_addr() helper function to compute the lmdesc
address, to make the code easier to understand. The helper will be used in
subsequent patches.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260526084710.3491480-6-claudiu.beznea@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use rz_dmac_disable_hw() instead of open coding it. This unifies the
code and prepares it for the addition of suspend to RAM and cyclic DMA.
The rz_dmac_disable_hw() from rz_dmac_chan_probe() was moved after
vchan_init() as it initializes the channel->vc.chan.device used in
rz_dmac_disable_hw().
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260526084710.3491480-5-claudiu.beznea@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use list_first_entry_or_null() instead of open-coding it with a
list_empty() check and list_first_entry(). This simplifies the code.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260526084710.3491480-4-claudiu.beznea@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
list_first_entry() does not return NULL when the list is empty,
making the existing NULL check invalid. Use list_first_entry_or_null()
instead.
Fixes: 21323b118c16 ("dmaengine: sh: rz-dmac: Add device_tx_status() callback")
Cc: stable@vger.kernel.org
Tested-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260526084710.3491480-3-claudiu.beznea@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Once the interrupt is requested, the interrupt handler may run immediately.
Since the IRQ handler can access channel->ch_base, which is initialized
only after requesting the IRQ, this may lead to invalid memory access.
Likewise, the IRQ thread may access uninitialized data (the ld_free,
ld_queue, and ld_active lists), which may also lead to issues.
Request the interrupts only after everything is set up. To keep the error
path simpler, use dmam_alloc_coherent() instead of dma_alloc_coherent().
Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260526084710.3491480-2-claudiu.beznea@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: new full-speed USB device number 2 using xhci-hcd
usb 1-1: New USB device found, idVendor=3c20, idProduct=3d21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210726905926
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB62174610061C213260E1A992D2102@TYUPR06MB6217.apcprd06.prod.outlook.com
|
|
Forgot to clean up the unused variables after the code refactoring,
which leads to compile warnings.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/aiGUoChmVKE-xwvC@sirena.org.uk
Fixes: f1f16e1809c8 ("ALSA: usb-audio: qcom: Use PAGE_ALIGN macro for buffer size calculation")
Link: https://patch.msgid.link/20260604151927.1227105-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_pcm_drain() uses init_waitqueue_entry which does not clear
entry.prev/next, and add_wait_queue with a conditional
remove_wait_queue that is skipped when to_check is no longer
in the group after concurrent UNLINK. The orphaned wait entry
remains on the unlinked substream sleep queue. On the next
drain iteration, add_wait_queue adds the entry to a new queue
while still linked on the old one, corrupting both lists. A
subsequent wake_up dereferences NULL at the func pointer
(mapped from the spinlock at offset 0 of the misinterpreted
wait_queue_head_t), causing a kernel panic.
Replace init_waitqueue_entry/add_wait_queue/conditional
remove_wait_queue with init_wait_entry/prepare_to_wait/
finish_wait. init_wait_entry clears prev/next via
INIT_LIST_HEAD on each iteration and sets
autoremove_wake_function which auto-removes the entry on
wake-up. finish_wait safely handles both the already-removed
and still-queued cases.
Fixes: 9b1dbd69ba6f ("ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain")
Signed-off-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Link: https://patch.msgid.link/20260604142559.3840881-1-eilaimemedsnaimel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.1
There's only one actual fix here, for the TDM configuration on the
Freescale SAI controller, everytihng else is DMI quirks for AMD systems.
One of those is relatively large as it adds a bunch of different structs
but it's all data.
|
|
A lockdep warning is observed during boot on a Qcom firmware-managed
platform:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
...
Call trace:
register_lock_class+0x128/0x4d8
__lock_acquire+0x110/0x1db0
lock_acquire+0x278/0x3d8
_raw_spin_lock_irq+0x6c/0xc0
dw_pcie_irq_domain_alloc+0x48/0x190
irq_domain_alloc_irqs_parent+0x2c/0x48
msi_domain_alloc+0x90/0x160
...
dw_pcie_irq_domain_alloc() takes pp->lock while allocating MSI
interrupts. pp->lock is normally initialized by dw_pcie_host_init(), but
Qcom firmware-managed hosts use the ECAM init path instead:
pci_host_common_ecam_create()
pci_ecam_create()
qcom_pcie_ecam_host_init()
dw_pcie_msi_host_init()
dw_pcie_allocate_domains()
That path constructs a fresh struct dw_pcie_rp and calls
dw_pcie_msi_host_init() directly, without going through
dw_pcie_host_init(). As a result, pp->lock was not initialized, which
triggers the warning.
Initialize pp->lock in qcom_pcie_ecam_host_init() before registering the
MSI domains so the firmware-managed ECAM path matches the normal DWC host
initialization sequence.
Fixes: 7d944c0f1469 ("PCI: qcom: Add support for Qualcomm SA8255p based PCIe Root Complex")
Signed-off-by: Yadu M G <yadu.mg@oss.qualcomm.com>
[mani: added fixes tag and CCed stable]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@kernel.org
Link: https://patch.msgid.link/20260604122418.727274-1-yadu.mg@oss.qualcomm.com
|
|
The rvgen parser for LTL stores literal true values in the python
representation (capitalised True), this doesn't build in C.
The Literal class should already handle this case but ASTNode skips its
strigification method and converts the value (true/false) directly.
Fix by delegating ASTNode stringification to the Literal and Variable
classes instead of bypassing them.
Fixes: 97ffa4ce6ab32 ("verification/rvgen: Add support for linear temporal logic")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
After rvgen was refactored to use subparsers, the common options (-a and
-D) were left in the main parser. This meant that they needed to be
called /before/ the subcommand and using them without subcommand was
allowed. This is not the original intent.
rvgen -D "some description" container -n name
Define the options as parent in the subparsers to allow them to be used
from both subcommands together with other options.
rvgen container -n name -D "some description"
Fixes: 5270a0e3041c ("verification/dot2k: Replace is_container() hack with subparsers")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-7-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
__start_to_invariant_check() and __get_constraint_env() parse the
environment variable's name from sources that have it padded with the
monitor name. This is removed using rstrip(), which is not meant to
strip a substring but rather a set of characters.
Use removesuffix() to actually get rid of the trailing _<monitor name>.
Fixes: a82adadb16894 ("verification/rvgen: Add support for Hybrid Automata")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-12-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Currently if ikm_setup_trace_instance() fails, the tool returns without
any cleanup, if rv was called with both -t and -r, this means the
reactor is not going to be cleared.
Jump to the cleanup label to restore the reactor if necessary.
Fixes: 6d60f89691fc9 ("tools/rv: Add in-kernel monitor interface")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-5-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
When listing monitors within a specific container (rv list <container>),
the tool incorrectly matched monitors if the requested container name
was only a prefix of the actual container (e.g., 'rv list sche' would
incorrectly list monitors from 'sched:').
Fix this by ensuring the container name is an exact match and is
immediately followed by the ':' separator.
Fixes: eba321a16fc6 ("tools/rv: Add support for nested monitors")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
__ikm_find_monitor_name() relies on strstr() to find a monitor by name,
which fails if the target monitor is a substring of a previously listed
monitor.
Fix it by tokenizing the available_monitors file and matching full
tokens instead.
Fixes: eba321a16fc6 ("tools/rv: Add support for nested monitors")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
ikm_fill_monitor_definition() copies monitor name and description with
strncpy(), but does not guarantee NUL termination when source strings are
equal to or longer than the destination buffers.
Clamp copies to sizeof(dst) - 1 and explicitly append '\0' for both fields
to keep them safe for later string operations.
Suggested-by: unknownbbqrx <dev@unknownbbqr.xyz>
Fixes: 6d60f89691fc9 ("tools/rv: Add in-kernel monitor interface")
Link: https://lore.kernel.org/r/20260604120946.90302-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
In test_intel_pt.sh, the test script compiled two external C programs at
runtime using /usr/bin/cc (a thread loop workload and a JIT self-
modifying workload). Relying on external C compilers inside shell tests
frequently causes failures in continuous integration environments.
Create a built-in 'jitdump' workload and switch test_intel_pt.sh to use
'perf test -w thloop' and 'perf test -w jitdump'. Also add multi-
architecture compatibility without external C compiler dependencies, the
workload instruction arrays dynamically encode CHK_BYTE into opcodes
across x86, ARM32, ARM64, RISC-V, PowerPC, MIPS, LoongArch, and s390x.
Some minor include fixes for util/jitdump.h.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a shell test script (test_test_junit_output.sh) to execute perf test
with the -j/--junit option and validate that the generated test report
complies perfectly with standard XML formatting using Python's
ElementTree XML parser.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support for Embedded Controller found in the Microsoft Surface RT and
used to monitor battery cell and charger input status and properties.
Controller works both for UEFI and APX booting.
[wmjb: added POWER_SUPPLY_PROP_CHARGE_NOW support]
Signed-off-by: Jethro Bull <jethrob@hotmail.com>
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://patch.msgid.link/20260507134608.76222-3-clamor95@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Document Embedded Controller used in Microsoft Surface RT tablets for
monitoring battery properties and charger status.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260507134608.76222-2-clamor95@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add a -j/--junit command line option to generate standard JUnit XML
format test reports. The generated file defaults to 'test.xml' if no
filename is specified, but allows users to override the path (e.g.
-jmytest.xml).
The XML report captures individual test suite and subtest execution
latency, alongside XML-escaped failure logs and skip reasons, while
preserving the full multi-process concurrency speed of parallel test
execution.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20260602174129.3192312-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Refactor the monolithic 'util' test suite into distinct 'String
replacement' and 'BLAKE2s hash' sub-tests using the struct test_case
framework. This improves test reporting granularity and is used in a
subsequent perf test for JUnit XML test result reporting.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When extracting shell test descriptions in tests-scripts.c, the parser
skipped the first line assuming it was the shebang (#!/bin/sh) and then
read the first comment line on line 2 as the test description.
However, checkpatch.pl expects shell scripts to declare their SPDX
license identifier on line 2 (# SPDX-License-Identifier: ...). This
caused the test harness to extract the SPDX license string as the test
description.
Refactor shell_test__description to use io__getline, skipping both
shebang and SPDX comment lines. This allows shell tests to include
standard SPDX headers without breaking test suite description
extraction.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When running perf test, the status column (: Ok) became misaligned when
subtest indexes reached 2 or 3 digits (e.g. 9.100 vs 9.9 vs 10.1). This
occurred because the subtest description field width (subw) was
statically fixed to width - 2, assuming all subtest index prefixes were
exactly 7 characters wide.
Dynamically calculate subw based on the exact character length of the
test suite and subtest index prefix. This ensures the status column is
perfectly aligned vertically across all test outputs regardless of
subtest index digit count.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, when running test suites (perf test), users must scroll
through hundreds of lines of console output to manually tally the number
of passed, skipped, or failed test cases.
Introduce an automated, global execution summary printed at the absolute
tail of the test run:
1. Track counts mid-flight inside the print_test_result() accumulator,
clearly separating pass counts into standalone main tests vs.
individual subtests (where num_test_cases > 1).
2. Accumulate the precise descriptions of all failed test cases
directly into a global string buffer, formatted with their suite
indices (e.g., 3.1: Parse event definition strings) for effortless
cross-referencing.
3. Define a summary printer function print_tests_summary() that
emits a colored outline of the final pass, skip, and fail totals,
followed by the explicit list of failed tests.
4. Invoke the summary printer right before freeing the test array at
the absolute tail of __cmd_test(), guaranteeing that the summary is
successfully printed even if an internal emergency signal cleanup
occurs or if the user interrupts the run early.
Example output:
```
$ sudo perf test -v
1: vmlinux symtab matches kallsyms : Skip
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
...
163: perf trace summary : Ok
=== Test Summary ===
Passed main tests : 123
Passed subtests : 145
Skipped tests : 22
Failed tests : 6
List of failed tests:
92: perf kvm tests
95: kernel lock contention analysis test
120: perf metrics value validation
124: Check branch stack sampling
143: perftool-testsuite_probe
158: test Intel TPEBS counting mode
```
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on
the perfmon it returns, but v3d_perfmon_set_global_ioctl() and
v3d_perfmon_delete() fail to release that reference on several paths:
1. v3d_perfmon_set_global_ioctl() leaks the reference on its error
paths.
2. CLEAR_GLOBAL leaks both the find reference and the reference
previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl
that configured it.
3. Destroying a perfmon that is the current global perfmon leaks the
reference stashed by the SET_GLOBAL ioctl.
Release each of these references explicitly.
Cc: stable@vger.kernel.org
Fixes: c6eabbab359c ("drm/v3d: Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260531-v3d-perfmon-lifetime-v2-1-60ed4485a203@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
Currently, when running tests in verbose mode (-v), if a test case
fails, the entire raw standard error buffer is dumped to stderr via
fprintf(stderr, "%s", child->err_output.buf). For tests that generate
massive amounts of debugging or logging output before dying, this
results in multi-page terminal dumps where highly critical diagnostic
keywords (error, fail, segv) are easily lost.
Implement a smart, bounded snippet string processor to improve
failure triaging:
1. Introduce a configurable quota limit static unsigned int
failure_snippet_lines = 10; accessible via a new command-line option
--failure-snippet-lines <N>.
2. Parse the raw error buffer dynamically into lines and run a
three-pass extraction algorithm:
- Pass 0: Always select the very first line of the log as an initial
outline marker.
- Pass 1: Scan forward from the top of the log to pick up to N lines
that contain case-insensitive failure keywords (error, fail,
segv, abort) to isolate the root cause. Automatically pull in
the immediate subsequent line as highly-prioritized context.
Allow adjacent matching lines to overlap without dropping context
by evaluating keywords for all lines (e.g. when "Failed to
report" is followed by "Error:").
- Pass 2: If quota remains, scan backward from the absolute tail of
the log to capture trailing crash or abort context.
3. Output the selected lines in their original chronological order,
inserting a clear ... separator between non-contiguous line jumps.
4. Wrap matched failure keywords dynamically in bold red
(PERF_COLOR_RED) to immediately draw the eye to failures.
5. Invoke the smart processor purely when verbose == 1 && ret ==
TEST_FAIL in both finish_test and finish_tests_parallel, leaving
raw full-output dumping completely untouched when running highly
verbose (-vv).
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When running tests in parallel with verbose output (-v), child processes
write to pipes. If a test produces significant output (e.g. Granite
Rapids metric parsing printing hundreds of lines), it fills the 64KB
pipe buffer and blocks.
Previously, the parent harness (finish_test) only polled the pipe of the
current test waiting to be printed. Other children blocked indefinitely
until the parent reached them, severely sequentializing execution.
Address this by implementing finish_tests_parallel() to poll and drain
output pipes from all running children simultaneously into per-child
buffers, employing safe strbuf_addstr string operations alongside
thorough variable orderings for strict ISO C90 compliance. Reaping
occurs out of order as children finish, while final result printing
remains strictly in order.
This drops parallel verbose execution time for the PMU events suite from
~35 seconds down to ~5.9 seconds.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update check_if_command_finished() and wait_or_whine() to handle invalid
PIDs gracefully (<= 0) by setting cmd->finished = 1 and returning early.
This avoids executing waitpid(-1, ...) or waitpid(0, ...) downstream,
which can block or reap parallel tests' exit status causing state
corruption.
Introduce a fallback mechanism in check_if_command_finished() using
waitpid(..., WNOHANG) when /proc/<pid>/status is inaccessible (e.g. due
to EMFILE/ENFILE) to safely check and reap finished children.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Break apart the slow "Parsing of PMU event table metrics" tests into one
pair of tests (real and fake PMU) per metric table found, storing the
specific table pointer in priv data. Implement setup_pmu_events_suite()
to dynamically allocate and populate these test cases. Split static
parser tests out into a separate test__parsing_fake_static() test case.
Update test__parsing() and test__parsing_fake() to retrieve the specific
table from priv data and test only that table, maintaining fallback
compatibility if priv is NULL.
Running these individual tests in parallel significantly reduces overall
test execution time.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add void *priv to struct test_case to allow passing per-test context.
Add int (*setup)(struct test_suite *) to struct test_suite to allow
dynamic generation of test cases. Update build_suites() to invoke the
setup callback for each suite if present, ensuring dynamic cases are
available before listing or running.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When running tests in parallel, the parent process reads output from the
child's pipe. However, it might exit the loop as soon as the child is
detected as finished, potentially missing data that arrived in the pipe
just after the last poll or before the loop terminated.
Address this by draining the pipe after the main loop in finish_test.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add name field to struct pmu_metrics_table and populate it in generated
tables. Add pmu_metrics_table__name() to retrieve the name. Add
pmu_metrics_table__for_each_table() to iterate over all known metric
tables.
This will be used to break apart slow metric tests per table.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make jevents.py generate C code that complies with formatting tools:
- Add /* clang-format off */ before big_c_string and re-enable it
after system mapping tables, bypassing large generated tables while
checking functions and early structs.
- Make comments more human readable and avoid going over 100 character
line length.
- Fix spaces indentation to tabs in struct/array initializers.
- Fix other checkpatch detected related issues.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Parallel verbose test execution can trigger a race condition in tpebs_stop
if called concurrently or when PID reuse occurs, causing finish_command()
to block or reap the wrong process.
Introduce a `tpebs_stopping` flag inside intel-tpebs.c to prevent
redundant stop execution paths, and safely restore the `cmd.pid`
temporarily only during `finish_command()` to ensure it is properly reaped,
while preventing other threads from referencing it.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Annotate can open with an empty window if the disassembly tool fails.
After the linked change, the TUI started assuming there was a current
annotation line and could assert or segfault in the seek, refresh, and
source-toggle paths.
Handle empty annotate windows explicitly: set the asm entry count before
resetting the browser, return early when refreshing an empty list, and
ignore source line toggle when there is no current annotation line.
Fixes the following when opening an annotation:
perf: ui/browser.c:125: ui_browser__list_head_seek: Assertion `pos != NULL' failed.
Aborted
Fixes: e201757f7a0a901e ("perf annotate: Fix source code annotate with objdump")
Assisted-by: GitHub Copilot:GPT-5.4
Signed-off-by: James Clark <james.clark@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For evlist of a certain event/metric, the HEAD should be the event
leader. In some scenarios where uncore_xxx_0 does not exist, the event
leader is not the first element after sorting. For example, on my test
machine uncore_iio_0 does not exist, the event leader is uncore_iio_2.
However, in `evlist__cmp`, it was reordered based on the PMU name, which
makes uncore_iio_1 the HEAD of evlist, breaking the following merge
logic in `evsel__merge_aliases`.
The patch adds a loop at the end of
`parse_events__sort_events_and_fix_groups` to make sure the first
wildcard match is the earliest entry in the list, updating pointers
accordingly without breaking reordering detection.
Tested on device lacks uncore_iio_0, and `perf test` looks good.
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In kallsyms__parse(), the loop reading symbol names iterates with i <
sizeof(symbol_name), which allows i to reach sizeof(symbol_name) upon
loop exit. The subsequent symbol_name[i] = '\0' then writes one byte
past the end of the stack-allocated symbol_name[] array.
Fix this by changing the loop bound to KSYM_NAME_LEN, so the null
terminator always lands within the array. The overflow is triggerable by
a kallsyms entry with a symbol name of KSYM_NAME_LEN+1 or more
characters (e.g., long Rust mangled names or a malicious
/proc/kallsyms).
Fixes: 53df2b9344128984 ("libsymbols kallsyms: Parse using io api")
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update `metric.py` to support the new `aggr_nr` keyword in the python
metric generator. Replace the usage of `source_count` with `aggr_nr` in
`IntelMissLat` inside `intel_metrics.py` so that uncore latency metrics
(like `lpm_miss_lat`) scale correctly on multi-socket and SNC systems when
aggregated globally.
Additionally, update the validation bypass logic in `CheckEveryEvent()`
inside `metric.py` to whitelist 'cha' and 'uncore' events. This
prevents validation failures when compiling metrics referencing these
PMU-specific uncore events.
Assisted-by: Gemini:gemini-3.1-pro-preview
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Tested-by: Zide Chen <zide.chen@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce the `aggr_nr` function to the metric expression parser.
`aggr_nr` allows metric formulas to dynamically utilize the number of
aggregated targets (`aggr->nr`) instead of relying on the static
`source_count` (which represents the static socket or node count).
This adds the `AGGR_NR` token to the lexer and parser, updates the
expression parsing context helpers to store `aggr_nr`, and feeds
`aggr->nr` from the aggregation structure in `prepare_metric`.
Assisted-by: Gemini:gemini-3.1-pro-preview
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Tested-by: Zide Chen <zide.chen@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In tools/build/feature/Makefile, test-clang-bpf-co-re.bin and
test-bpftool-skeletons.bin redirected grep output but never touched or
created the $@ target file upon success.
Because the target file was never created on disk, Kbuild could never cache
the result of the check. Consequently, Make treated the prerequisite as
missing and continuously re-executed the Clang BPF backend and bpftool
feature checks on every single sub-make evaluation during build startup, or
on every incremental build.
Refactor both feature check recipes to touch $@ on success. For
test-clang-bpf-co-re.bin, group the shell pipeline within curly braces
and redirect both stdout and stderr to .make.output to allow errors to
be inspected and not appear in build output.
List test-clang-bpf-co-re.bin's input C file as a dependency so
modification triggers a rebuild. For test-bpftool-skeletons.bin, add it
to the FILES list so that it will be cleaned.
Assisted-by: Gemini:gemini-3.1-pro-preview
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Yuzhuo Jing <yuzhuo@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The lock_contention BPF program uses __sync_val_compare_and_swap() to
atomically update the max_time and min_time fields in contention_data.
This builtin lowers to the BPF_CMPXCHG instruction, which is only
available in BPF ISA v3. Without an explicit -mcpu flag, Clang targets
BPF v1/v2 by default on older toolchains (Clang < 18), causing build
errors when v3 instructions are emitted.
Add -mcpu=v3 to CLANG_OPTIONS, which is used exclusively in the BPF
skeleton compilation rule.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The ACPI and swnode GPIO lookup backends both temporarily grab a reference
to the gpio_device, resolve the descriptor, and then drop the reference
before returning the descriptor to the caller. They carry FIXME comments
warning that the descriptor is being returned without its backing device
reference.
However, the gpiod_find_and_request() core functionally prevents any
use-after-free window by wrapping the entire lookup operation inside the
gpio_devices_srcu read lock. The lookup functions are correct to drop
their references since the caller (gpiod_request) will subsequently take
its own permanent module and device references safely.
Remove these obsolete FIXMEs to prevent misleading future subsystem
developers.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260524162708.62949-3-scardracs@disroot.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The DEFINE_CLASS macro for gpio_chip_guard currently expects a non-const
struct gpio_desc pointer. This prevents the guard from being used cleanly
in fast paths that receive a const descriptor, forcing developers to fall
back to open-coding the SRCU locks.
Update the macro to accept a const struct gpio_desc pointer. This is valid
because the actual targeted gpio_device pointer assignment does not drop
const qualifiers on the target structure.
Convert the open-coded SRCU locks in gpiod_get_raw_value_commit() and
gpiod_to_irq() to use the guard, removing their legacy FIXME comments.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260524162708.62949-2-scardracs@disroot.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The update_contention_data() had a FIXME noting that max_time and
min_time updates lacked atomicity. Two CPUs could simultaneously read a
stale value, pass the comparison check and race on the write-back, with
the smaller value potentially overwriting the larger one and silently
corrupting the statistics.
Fix this by replacing the bare conditional assignments with a
bpf_loop()-based CAS retry loop. Each field tracks its own convergence
independently via max_done/min_done flags in cas_ctx, so a successful
CAS on one field is never retried even if the other field needs more
attempts.
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The default ping-pong uses sizeof(int) (4 bytes) per iteration, which
exercises only the pipe-buffer merge path and keeps allocation entirely
out of the picture. That makes the bench a useful scheduler / context-
switch latency probe but unable to surface anything from the pipe
page-allocation hot path.
Add a -s/--write-size option that sets the bytes written and read per
ping-pong iteration. The buffer is allocated for each side via struct
thread_data and replaces the on-stack int previously used. The default
remains sizeof(int) so existing invocations are unchanged.
With --write-size set above PAGE_SIZE the bench drives anon_pipe_write()
through alloc_page() (or the bulk pre-alloc, if the relevant patch is
applied), which is what we want when measuring pipe locking and page
allocation work.
The bench is a ping-pong: both sides call write() before read(), so a
single write_size payload must fit entirely in the pipe buffer or both
sides deadlock waiting for the other to drain.
Resize the pipe via F_SETPIPE_SZ to match write_size (skipped at the
sizeof(int) default), and error out cleanly when the request exceeds
/proc/sys/fs/pipe-max-size.
Committer testing:
⬢ [acme@toolbx perf-tools-next]$ perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 0.915 [sec]
0.915493 usecs/op
1092307 ops/sec
⬢ [acme@toolbx perf-tools-next]$ perf bench sched pipe --write-size 1024
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 0.891 [sec]
0.891915 usecs/op
1121183 ops/sec
⬢ [acme@toolbx perf-tools-next]$ perf bench sched pipe --write-size 4096
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 1.366 [sec]
1.366073 usecs/op
732025 ops/sec
⬢ [acme@toolbx perf-tools-next]$ strace -e fcntl perf bench sched pipe --write-size 4096
# Running 'sched/pipe' benchmark:
fcntl(4, F_SETPIPE_SZ, 4096) = 4096
fcntl(6, F_SETPIPE_SZ, 4096) = 4096
^Cstrace: Process 17840 detached
⬢ [acme@toolbx perf-tools-next]$ strace -e fcntl perf bench sched pipe --write-size 1024
# Running 'sched/pipe' benchmark:
fcntl(4, F_SETPIPE_SZ, 1024) = 4096
fcntl(6, F_SETPIPE_SZ, 1024) = 4096
^Cstrace: Process 17845 detached
⬢ [acme@toolbx perf-tools-next]$ strace -e fcntl perf bench sched pipe
# Running 'sched/pipe' benchmark:
^Cstrace: Process 17851 detached
⬢ [acme@toolbx perf-tools-next]$
⬢ [acme@toolbx perf-tools-next]$ perf bench sched pipe --write-size 1048577
# Running 'sched/pipe' benchmark:
--write-size 1048577 exceeds /proc/sys/fs/pipe-max-size
⬢ [acme@toolbx perf-tools-next]$ cat /proc/sys/fs/pipe-max-size
1048576
⬢ [acme@toolbx perf-tools-next]$
acme@number:~/git/perf-tools-next$
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
