| Age | Commit message (Collapse) | Author |
|---|
|
Return early in submit path when the multi-queue primary exec
queue is suspended to avoid submitting while suspended.
v2: Remove idle_skip_suspend fix as that feature is being
reverted here https://patchwork.freedesktop.org/series/167262/
Fixes: bc5775c59258 ("drm/xe/multi_queue: Add GuC interface for multi queue support")
Cc: stable@vger.kernel.org # v7.0+
Assisted-by: GitHub-Copilot:claude-sonnet-4.6
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260603233946.863663-2-niranjana.vishwanathapura@intel.com
(cherry picked from commit b7fb55cc3364ca128cfff9d50649ffd4327cd01e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In the schedule-disable done path for suspend, we
signal the suspend fence before clearing pending_disable.
That wakeup can let suspend_wait complete and resume be queued
immediately. The resume path may then reach enable_scheduling()
while pending_disable is still set and hit the
!exec_queue_pending_disable(q) assertion.
Fix this by clearing pending_disable before signaling
the suspend fence, so any resumed transition observes a
consistent state.
Fixes: 87651f31ae4e ("drm/xe/guc_submit: fix race around suspend_pending")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260603065217.3131066-3-tilak.tirumalesh.tangudu@intel.com
(cherry picked from commit 4b1ae138b0e103d753773956a84eebc2edbf62c4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6.
The idle-skip optimization bypasses GuC suspend, so the GPU may not
perform the context switch that flushes TLB entries for invalidated
userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB
invalidation and page faults during userptr invalidation tests.
Restore unconditional schedule toggling on suspend so the context-switch
TLB flush is always performed.
This optimization will be reintroduced with a fix that does not skip
suspend in LR/preempt-fence VM mode.
Fixes: 8533051ce920 ("drm/xe: Skip exec queue schedule toggle if queue is idle during suspend")
Cc: stable@vger.kernel.org # v7.0+
Suggested-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260603065217.3131066-2-tilak.tirumalesh.tangudu@intel.com
(cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu ==
smp_processor_id(), assuming the local softirq path already handled this
CPU's timers.
This assumption is wrong because jiffies can advance after the handling of
the CPU's global timers in run_timer_base(BASE_GLOBAL) and before
tmigr_handle_remote() evaluates the expiry times.
As a consequence a timer which expires after the CPU local timer wheel
advanced and becomes expired in the remote handling is ignored and the
callback is never invoked and removed from the timer wheel.
What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it
as expired, and the event is re-queued with expires == now on each
iteration. The goto-again loop spins indefinitely.
Fix this by calling timer_expire_remote() unconditionally. That's minimal
overhead for the common case as __run_timer_base() returns immediately if
there is nothing to expire in the local wheel.
[ tglx: Amend change log and add a comment ]
Fixes: 7ee988770326 ("timers: Implement the hierarchical pull model")
Reported-by: Alon Kariv <alonka@amazon.com>
Signed-off-by: Amit Matityahu <amitmat@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260603170139.33628-1-amitmat@amazon.com
|
|
When KVM added a lockdep assertion to catch unexpected cases where guest
CPUID lookups are performed in IRQ disabled context, it used
"linux/lockdep.h" for header inclusion even though lockdep.h is a
kernel wide header. Switch to using <linux/lockdep.h>.
Fixes: 9717efbe5ba3 ("KVM: x86: Disallow guest CPUID lookups when IRQs are disabled")
Signed-off-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20260604011106.315176-1-kai.huang@intel.com
[sean: add Fixes, Kai is too polite :-)]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Commit e09c77d94003 ("eventpoll: hoist CTL_ADD scratch state into
struct ep_ctl_ctx") moved tfile_check_list from a file-scope global into
the stack-allocated struct ep_ctl_ctx, and in doing so replaced the
EP_UNACTIVE_PTR sentinel with NULL on the grounds that "NULL is the
obvious 'empty' value and zero-init handles it for free", describing the
change as "No functional change". It is not.
epitems_head->next is overloaded with two roles:
1. the "next" pointer that threads a head onto ctx->tfile_check_list;
2. a membership flag: ep_remove_file() uses
!smp_load_acquire(&v->next) to mean "this head is not on any
pending ctx->tfile_check_list and is therefore safe to free".
Before that change the EP_UNACTIVE_PTR sentinel kept the two roles
disjoint: a head on the list always had a non-NULL ->next (another head,
or the sentinel at the tail), so ->next == NULL was equivalent to "never
listed". With the sentinel gone the list is NULL-terminated, so the tail
head's ->next is NULL as well. ep_remove_file()'s gate can no longer
distinguish "never listed" from "listed at the tail", and misfires on
the tail head.
The reader (reverse_path_check_proc) holds epnested_mutex +
rcu_read_lock; the freer (ep_remove_file) holds ep->mtx + file->f_lock.
The two sides share no mutex -- the sentinel was the invariant the gate
relied on to know it could skip the read side. With it gone,
ep_remove_file() frees the tail head while reverse_path_check_proc() is
still walking it, producing the slab-use-after-free read. The syzbot
reproducer hits this within seconds on a multi-CPU VM.
Restore the sentinel: initialize ctx.tfile_check_list to EP_UNACTIVE_PTR
in do_epoll_ctl_file(), and terminate the walk on "!= EP_UNACTIVE_PTR"
in reverse_path_check() and clear_tfile_check_list(). The tail head's
->next becomes the sentinel again rather than NULL, so
ep_remove_file()'s gate regains its exclusivity and stops misfiring on
the tail. ep_remove_file() itself is unchanged.
This restores the invariant the file-scope tfile_check_list relied on
before that change while preserving the ctx packaging it introduced.
Reported-by: syzbot+e70e1b6cba8714543f7c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e70e1b6cba8714543f7c
Fixes: e09c77d94003 ("eventpoll: hoist CTL_ADD scratch state into struct ep_ctl_ctx")
Suggested-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/all/20260528-rotwild-summt-kuhhandel-7276ef4c33b7@brauner.io/
Signed-off-by: Zhan Wei <zhanwei919@gmail.com>
Link: https://patch.msgid.link/20260529142533.23696-1-zhanwei919@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v7.2
- dt-bindings updates:
- Document compatible for Agilex5 socdk debug daughter card
- Document compatible for Agilex7-M devkit
- Add support for Agilex7-M devkit
- Remove reg property in the PMU on 32-bit SoCFPGA
- Set i3c alias on Agilex3 and Agilex5
- Update data-width of DMA controller on Agilex5
- Set phy-mode to rgmii on Agilex5
- Increase the JFFS2 rootfs partition on the Arria10 NAND SoCDK
* tag 'socfpga_dts_updates_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: arria10: Increase JFFS2 rootfs partition size
dt-bindings: altera: add compatible for agilex5 socdk debug daughter card
arm64: dts: socfpga: agilex5: Fix phy-mode to rgmii as HW provides clock delay
arm64: dts: socfpga: agilex5: update data-width for dmac
arm64: dts: socfpga: agilex3: set alias for i3c controller
arm64: dts: socfpga: agilex5: set alias for i3c controllers
ARM: dts: socfpga: remove the reg property in the pmu
arm64: dts: socfpga: agilex7m: Add SoCFPGA Agilex7-M devkit
dt-bindings: arm: altera: document the Agilex7-M devkit
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
wifi: iwlwifi-next : updates - 2026-06-03
This pull request contains iwlwifi features and cleanups. Notably:
- Bump max core version for BZ/SC/DR to 106.
- Add KUnit tests for link grading, RSSI adjustment, and beacon
handling;
- Drop core101 support and remove TLC config v4/v5 compatibility code.
- Fixes:
Fix PCIe write pointer detection
Fix STEP_URM register address
Remove unneeded WoWLAN warning
reduce NIC wakeups during dump.
Revert MODULE_FIRMWARE relocation change
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v7.2 (PR #3)
In ath12k, add driver support for WDS mode.
In ath11k and ath12k, a number of cleanups and minor bug fixes.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware version number check for IGTK introduced in
commit c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key")
lets the amount of ciphers decrease on every boot of a too old firmware and
that is practically happening. It also does not take into account other
chips than the wl18xx. On some wl128x, the following can be observed
when connecting via nm to a common ap:
[ 484.113311] wlcore: WARNING could not set keys
[ 484.117828] wlcore: ERROR Could not add or replace key
[ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5)
[ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142
[ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1
[ 484.145721] wlcore: down
[ 484.148986] ieee80211 phy0: Hardware restart was requested
[ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142)
[ 484.633758] wlcore: Association completed.
[ 484.690490] wlcore: ERROR command execute failure 14
[ 484.690490] ------------[ cut here ]------------
[ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892
This repeats endlessly.
Always disable IGTK on wl12xx and fix the decrementing mess.
Fixes: c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260604103316.377251-1-andreas@kemnade.info
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use platform_get_irq_optional() to retrieve the interrupt resource
instead of directly parsing and mapping the OF node via
irq_of_parse_and_map(). This is the standard pattern for platform
devices. irq_of_parse_and_map() requires ire_dispose_mapping(), which
is missing.
Assisted-by: Antigravity:Gemini-3.5-Flash
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Message-ID: <20260603192511.6869-1-rosenp@gmail.com>
[Handle a negative return from platform_get_irq_optional() to mean
no interrupt is assigned.]
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
When vmci_transport_recv_connecting_server() returns an error,
vmci_transport_recv_listen() calls vsock_remove_pending() but never
calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented
permanently.
Repeated handshake failures (malformed packets, queue pair alloc
failure, event subscribe failure) cause sk_ack_backlog to climb
toward sk_max_ack_backlog. Once it reaches the limit the listener
permanently refuses all new connections with -ECONNREFUSED, a
silent denial of service requiring a process restart to recover.
The two existing sk_acceptq_removed() calls in af_vsock.c do not
cover this path: line 764 checks vsock_is_pending() which returns
false after vsock_remove_pending(), and line 1889 is only reached
on successful accept().
Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on
the error path.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Cc: stable@vger.kernel.org
Signed-off-by: Raf Dickson <rafdog35@gmail.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260526104356.469928-1-rafdog35@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit d594cc6f2c58 ("wifi: mac80211: restore non-chanctx injection
behaviour") restored the monitor injection fallback for drivers using
chanctx emulation but explicitly deferred drivers that transitioned
to real chanctx ops. mt76 falls in that category and still drops
every injected frame when monitor coexists with another interface.
When the monitor has no chanctx of its own, fall back to the only
chanctx in flight if there is exactly one. Refuse if multiple are
present: picking arbitrarily would inject on an unrelated channel.
Emulated and real chanctx drivers both flow through this fallback,
since emulation always presents zero or one chanctx in
local->chanctx_list.
Reran the airgeddon evil-twin flow (hostapd AP + coexisting monitor
VIF on the same phy + aireplay-ng deauth from the monitor) on
mt7921e PCIe and mt7921u USB across 2.4 GHz and 5 GHz, and on a
Kali VM with MT7921U passthrough as the closest match to the
original reporter's setup. None reproduced the hang seen against
the earlier attempt at this fix
(<20251216111909.25076-2-johannes@sipsolutions.net>) or against v1
on lore in March.
Cc: <stable+noautosel@kernel.org> # causes some older drivers to crash
Reported-by: Oscar Alfonso Diaz <oscar.alfonso.diaz@gmail.com>
Closes: https://github.com/morrownr/USB-WiFi/issues/682
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers")
Signed-off-by: 傅继晗 <fjhhz1997@gmail.com>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/5c2760bd9bc34616bf7892848872522254dd1ce5.1780513445.git.lucid_duck@justthetip.ca
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A NAN Device interface can have keys associated with it, e.g.,
IGTK and BIGTK used for Tx. When a NAN Device interface is stopped,
we need to clear these keys.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260603143624.c6c771885383.I929410cb8efec4fab2d42ead396bfefaf9f803f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ASUS Vivobook 18 M1807GA (AMD ACP7.x, PCI 1022:15e2, subsystem
1043:3531) exposes a single Realtek RT721 SDCA codec on SoundWire link 1.
The BIOS reports the ACP audio config flag as 0 (SoundWire mode), so
snd_pci_ps claims the device, brings up the SoundWire managers and
enumerates the RT721 peripheral (sdw:0:1:025d:0721:01); the rt721-sdca
codec driver binds successfully.
No sound card is created, however: acp63_sdw_machine_select() walks
snd_soc_acpi_amd_acp70_sdw_machines[] and finds no entry whose declared
SoundWire peripherals are all present on the bus. The only existing RT721
entry, acp70_rt721_l1u0_tas2783x2_l1u8b, additionally requires two
TAS2783 amplifiers and deliberately exposes the RT721 as jack + DMIC
only. This M1807GA variant has no external amplifiers - the RT721's
internal AIF2 amplifier path drives the speakers - so that entry never
matches and no machine device is registered.
Add a standalone RT721 machine entry for link 1 exposing all three RT721
endpoints (jack/AIF1, speaker amplifier/AIF2, DMIC/AIF3), mirroring the
standalone RT722 configuration. Place it after the TAS2783 combo entry so
platforms that do have the external amplifiers continue to match the more
specific entry first.
ACPI _ADR of the codec: 0x000130025D072101
(link_id=1 version=3 mfg_id=0x025d Realtek part_id=0x0721 class=0x01).
Verified on the hardware: with the entry present the amd_sdw machine
binds, an "amd-soundwire" card is registered exposing the rt721-sdca
AIF1 (SimpleJack) and AIF2 (SmartAmp) PCM devices, and audio plays out
of the built-in speakers.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221282
Signed-off-by: Aleksander Pshenitsyn <brains.fatman@gmail.com>
Link: https://patch.msgid.link/20260531101159.14241-1-brains.fatman@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove open coding of the function to simplify the code.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260528221928.142511-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The cdns xspi controller slave dma interface may support wider data
width. Wider I/O width can benefit performance. We can know the width
by checking the CTRL_FEATURES_REG's DMA_DATA_WIDTH bit, 0 means 32bit
1 means 64bit.
A simple test with QSPI nor flash on one arm64 platform:
Use 8bit slave dma data width (now):
# dd if=/dev/mtdblock0 of=/dev/null bs=8192 count=1000
1000+0 records in
1000+0 records out
8192000 bytes (7.8MB) copied, 1.368735 seconds, 5.7MB/s
Use 32bit slave dma data width:
# dd if=/dev/mtdblock0 of=/dev/null bs=8192 count=1000
1000+0 records in
1000+0 records out
8192000 bytes (7.8MB) copied, 1.088787 seconds, 7.2MB/s
Improved by 26.3%!
Use 64bit slave dma data width:
# dd if=/dev/mtdblock0 of=/dev/null bs=8192 count=1000
1000+0 records in
1000+0 records out
8192000 bytes (7.8MB) copied, 0.831104 seconds, 9.4MB/s
Improved by 64.9%!
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260602235825.28614-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current Card has dmi_longname[80] (when CONFIG_DMI), but no need
to have it in Card, we can alloc it. Tidyup it.
This is prepare for Card capsuling
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a4tk2weh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add documentation for the new XFRM_MSG_MIGRATE_STATE netlink message,
which migrates a single SA identified by SPI and mark without involving
policies.
The document covers the motivation and design differences from the
existing XFRM_MSG_MIGRATE, the SA lookup mechanism, supported attributes
with their omit-to-inherit semantics, and usage examples.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Only accept XFRMA used in this method, reject the rest.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add a new netlink method to migrate a single xfrm_state.
Unlike the existing migration mechanism (SA + policy), this
supports migrating only the SA and allows changing the reqid.
The SA is looked up via xfrm_usersa_id, which uniquely
identifies it, so old_saddr is not needed. old_daddr is carried in
xfrm_usersa_id.daddr.
The reqid is invariant in the old migration.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The xuo pointer is not modified by xfrm_dev_state_add(); make it const.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Extract verify_xfrm_family() and verify_selector_prefixlen() from
verify_newsa_info() to allow reuse by other netlink handlers.
verify_xfrm_family() validates that a given address family is AF_INET
or AF_INET6 (with CONFIG_IPV6 guard).
verify_selector_prefixlen() validates that the selector prefix lengths
are within the bounds for the given address family.
No functional change.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Extract verify_mtimer_thresh() to consolidate the XFRMA_MTIMER_THRESH
validation logic shared between the add_sa and upcoming patch.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In preparation for an upcoming patch, move the xfrm_encap_tmpl and
xfrm_user_offload pointers from separate parameters into struct
xfrm_migrate, reducing the parameter count of
xfrm_state_migrate_create(), xfrm_state_migrate_install()
and xfrm_state_migrate()
The fields are placed after the four xfrm_address_t members where
the struct is naturally 8-byte aligned, avoiding padding.
No functional change.
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add descriptive(extack) error messages for all error paths
in state migration. This improves diagnostics by
providing clear feedback when migration fails.
After xfrm_init_state() use NL_SET_ERR_MSG_WEAK() as fallback for
error paths not yet propagating extack e.g. mode_cbs->init_state()
No functional change.
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add xfrm_migrate_sync() to copy curlft and replay state from the old SA
to the new one before installation. The function allocates no memory, so
it can be called under a spinlock. In preparation for a subsequent patch
in this series.
A subsequent patch calls this under x->lock, atomically capturing the
latest lifetime counters and replay state from the original SA and
deleting it in the same critical section to prevent SN/IV reuse
for XFRM_MSG_MIGRATE_STATE method.
No functional change.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When migrating between different address families, xfrm_addr_equal()
cannot meaningfully compare addresses, different lengths.
Only call xfrm_addr_equal() when families match, and take
the xfrm_state_insert() path when addresses are equal.
Fixes: 80c9abaabf42 ("[XFRM]: Extension for dynamic update of endpoint address(es)")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
To prepare for subsequent patches, split
xfrm_state_migrate() into two functions:
- xfrm_state_migrate_create(): creates the migrated state
- xfrm_state_migrate_install(): installs it into the state table
splitting will help to avoid SN/IV reuse when migrating AEAD SA.
And add const whenever possible.
No functional change.
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In preparation for a later patch in this series s/reqid/old_reqid/.
No functional change.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
During SA migration via xfrm_state_clone_and_setup(),
nat_keepalive_interval was silently dropped and never copied to the new
SA. mapping_maxage was unconditionally copied even when migrating to a
non-encapsulated SA.
Both fields are only meaningful when UDP encapsulation (NAT-T) is in
use. Move mapping_maxage and add nat_keepalive_interval inside the
existing if (encap) block, so both are inherited when migrating with
encapsulation and correctly absent when migrating without it.
Fixes: f531d13bdfe3 ("xfrm: support sending NAT keepalives in ESP in UDP states")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The current code prevents migrating an SA from UDP encapsulation to
plain ESP. This is needed when moving from a NATed path to a non-NATed
one, for example when switching from IPv4+NAT to IPv6.
Only copy the existing encapsulation during migration if the encap
attribute is explicitly provided.
Note: PF_KEY's SADB_X_MIGRATE always passes encap=NULL and never
supported encapsulation in migration. PF_KEY is deprecated and was
in feature freeze when UDP encapsulation was added to xfrm.
Tested-by: Yan Yan <evitayan@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add a struct extack parameter to xfrm_init_state() and pass it
through to __xfrm_init_state(). This allows validation errors detected
during state initialization to propagate meaningful error messages back
to userspace.
xfrm_state_migrate() now passes extack so that errors from the
XFRM_MSG_MIGRATE_STATE path are properly reported. Callers without an
extack context (af_key, ipcomp4, ipcomp6) pass NULL, preserving their
existing behaviour.
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
These assignments are overwritten within the same function further down
commit e8961c50ee9cc ("xfrm: Refactor migration setup
during the cloning process")
x->props.family = m->new_family;
Which actually moved it in the
commit e03c3bba351f9 ("xfrm: Fix xfrm migrate issues when address family changes")
And the initial
commit 80c9abaabf428 ("[XFRM]: Extension for dynamic update of endpoint address(es)")
added x->props.saddr = orig->props.saddr; and
memcpy(&xc->props.saddr, &m->new_saddr, sizeof(xc->props.saddr));
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The MSI Raider A18 HX A9WJG has an internal digital microphone
connected through AMD ACP6x, but this machine does not expose the
AcpDmicConnected ACPI property, so acp_yc_mach does not bind.
Add a DMI quirk for this model.
This was tested on an MSI Raider A18 HX A9WJG with board MS-182L,
BIOS E182LAMS.31A, AMD ACP6x rev 0x62, and Realtek ALC274. After
applying the quirk, the internal microphone appears as an acp6x DMIC
capture device and records correctly.
Signed-off-by: David Glushkov <david.glushkov@sntiq.com>
Link: https://patch.msgid.link/20260531214512.170716-1-david.glushkov@sntiq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When configuring 32 slots TDM (channels == slots == 32), the xMR
(Mask Register) write used:
~0UL - ((1 << min(channels, slots)) - 1)
The literal "1" is a signed 32-bit int. Shifting it by 32 positions is
undefined behaviour which may set this register to 0xFFFFFFFF, masking
all 32 slots.
Use GENMASK_U32() macro instead. For 32 slots this produces a zero mask:
~GENMASK_U32(31, 0) = ~0xFFFFFFFF = 0x00000000
Behaviour for fewer than 32 slots is unchanged.
Fixes: 770f58d7d2c5 ("ASoC: fsl_sai: Support multiple data channel enable bits")
Cc: stable@vger.kernel.org
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20260601083327.1535185-1-chancel.liu@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Translating between a BPF-arena pointer and its kernel-side address is just
an add or subtract of the arena's kern_vm start. More such translations are
coming, so cache that start on scx_sched as @arena_kern_base at arena attach
and wrap both directions. Convert the existing open-coded subtraction in
scx_call_op_set_cpumask().
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Fix the race by pruning the bin while still holding xfrm_policy_lock,
before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since
the lock is already held. The wrapper xfrm_policy_inexact_prune_bin()
becomes unused and is removed.
Race:
CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO)
========================== ==========================
xfrm_policy_bysel_ctx():
spin_lock_bh(xfrm_policy_lock)
bin = xfrm_policy_inexact_lookup()
__xfrm_policy_unlink(pol)
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_kill(ret)
// wide window, lock not held
xfrm_hash_rebuild():
spin_lock_bh(xfrm_policy_lock)
__xfrm_policy_inexact_flush():
kfree_rcu(bin) // bin freed
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_inexact_prune_bin(bin)
// UAF: bin is freed
Fixes: 6be3b0db6db8 ("xfrm: policy: add inexact policy search tree infrastructure")
Signed-off-by: Sanghyun Park <sanghyun.park.cnu@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which
can return NULL if the requested interface name does not exist. However,
the subsequent slave_dbg() call is placed before the NULL check:
slave_dev = __dev_get_by_name(net, ifr->ifr_slave);
slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here
if (!slave_dev)
return -ENODEV;
The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt,
(slave_dev)->name, ...) which unconditionally dereferences slave_dev->name
before the NULL check is performed. This results in a NULL pointer
dereference kernel oops when a user calls bonding ioctl (e.g.
SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave
interface name.
This is reachable from userspace via the bonding ioctl interface with
CAP_NET_ADMIN capability, making it a potential local denial-of-service
vector.
Fix by moving the slave_dbg() call after the NULL check.
Fixes: e2a7420df2e0 ("bonding/main: convert to using slave printk macros")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Link: https://patch.msgid.link/20260601085649.4029067-1-zhaojinming@uniontech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For DF and UMC PMUs, a single context is shared across all CPUs that
are connected to the same Data Fabric (DF) instance. Currently, the
Package ID, which also happens to be the Socket ID, is used to identify
DF instances. This approach works for configurations having a single IO
Die (IOD) but fails in the following cases.
* Older Zen 1 processors, where each chiplet has its own DF instance.
* Any configurations with multiple DF instances or multiple IODs in
the same package.
The correct way to identify DF instances is through the Node ID (not to
be confused with NUMA Node ID). This is available in ECX[7:0] of CPUID
leaf 0x8000001e and returned via topology_amd_node_id(). Hence, replace
usage of topology_logical_package_id() with topology_amd_node_id().
Fixes: 07888daa056e ("perf/x86/amd/uncore: Move discovery and registration")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/e7a71a727c6a7b118c23d3e469929c538c4665aa.1780315832.git.sandipan.das@amd.com
|
|
It gives useful info on knowing which PMUs are reserved by this process.
Also add config which would be useful.
Testing cycles:
$ ./perf stat -e cycles &
$ cat /proc/`pidof perf`/fdinfo/3
pos: 0
flags: 02000002
mnt_id: 16
ino: 3081
perf_event_attr.type: 0
perf_event_attr.config: 0x0
perf_event_attr.config1: 0x0
perf_event_attr.config2: 0x0
perf_event_attr.config3: 0x0
perf_event_attr.config4: 0x0
Testing L1-dcache-load-misses:
$ ./perf stat -e L1-dcache-load-misses &
$ cat /proc/`pidof perf`/fdinfo/3
pos: 0
flags: 02000002
mnt_id: 16
ino: 1072
perf_event_attr.type: 3
perf_event_attr.config: 0x10000
perf_event_attr.config1: 0x0
perf_event_attr.config2: 0x0
perf_event_attr.config3: 0x0
perf_event_attr.config4: 0x0
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Assisted-by: Gemini:gemini-3.1-pro-preview
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/20260602181349.3969429-1-ctshao@google.com
|
|
On Sierra Forest and Clearwater Forest, the FRZ_ALL bit in the global
control register defaults to 0 at boot, but UBOX PMON units do not
work until the global control register is explicitly written with 0
to trigger hardware initialization properly.
Implement the generic uncore_msr_global_init() callback and add it to
gnr_uncore_init[], which is shared by GNR, GRR, SRF, and CWF.
Fixes: 632c4bf6d007 ("perf/x86/intel/uncore: Support Granite Rapids")
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20260602144908.263680-8-zide.chen@intel.com
|
|
If the die is offline when uncore_die_to_cpu() is called, it silently
returns 0, which is misleading. Return -1 in this case to indicate
that all CPUs on the die are offline and the caller can take care of
it accordingly.
Opportunistically, replace -EPERM with -ENODEV, as -ENODEV is
the appropriate error when no CPUs are online across all dies.
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20260602144908.263680-7-zide.chen@intel.com
|
|
Move die_to_cpu() into uncore.c so it can be reused by the MSR
initialization path, preparing for the introduction of an MSR global
initialization callback.
Move the cpus_read_{lock,unlock}() out of the API, in order to make
it possible to be called when the lock is being held.
Add the uncore_ prefix for consistency with other uncore APIs.
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20260602144908.263680-6-zide.chen@intel.com
|
|
On some Raptor Cove CPUs, enabling uncore PMON globally at driver init
may increase power consumption even when no perf events are in use.
Drop adl_uncore_msr_init_box() and defer programming the global control
register to enable_box(), so it is only set when a box is actually used.
IMC and IMC freerunning counters use a separate control path and are
unaffected.
Fixes: 772ed05f3c5c ("perf/x86/intel/uncore: Add Alder Lake support")
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260602144908.263680-5-zide.chen@intel.com
|
|
pci_get_domain_bus_and_slot() increments the reference count of the
returned PCI device and therefore requires a matching pci_dev_put().
In skx_upi_topology_cb() and discover_upi_topology(), the lookup is
performed inside a loop, but pci_dev_put() is only called once after
the loop. As a result, references from all previous iterations are
leaked.
Move pci_dev_put(dev) into the if (dev) block immediately after
upi_fill_topology() returns.
Opportunistically, fix uninitialized variable in skx_upi_topology_cb().
Fixes: 4cfce57fa42d ("perf/x86/intel/uncore: Enable UPI topology discovery for Skylake Server")
Fixes: f680b6e6062e ("perf/x86/intel/uncore: Enable UPI topology discovery for Icelake Server")
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20260602144908.263680-4-zide.chen@intel.com
|
|
Theoretically, intel_uncore_find_discovery_unit() could return NULL,
e.g., when a CPU die is offline during uncore enumeration and its PMU
units are not added to the discovery RB-tree.
Guard against a NULL return value and the resulting invalid box control
address (0) before accessing hardware.
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20260602144908.263680-3-zide.chen@intel.com
|
|
In uncore_find_add_unit(), PMON units with the same unit ID may be
added to the uncore discovery RB-tree for different dies. These units
are distinguished by node->die.
However, intel_generic_uncore_box_ctl() uses a fixed die ID of -1 when
looking up the discovery unit, which may retrieve the wrong node on
multi-die systems.
Use box->dieid instead so the correct discovery unit is selected.
No functional issue has been observed so far because currently supported
platforms happen to use the same unit control register for such units.
Remove WARN_ON_ONCE() because with the above change a NULL unit can be
expected, e.g. when a CPU die is offline during uncore enumeration and
the unit is not added to the RB-tree. In this case,
intel_uncore_find_discovery_unit() returns NULL once the die becomes
online, and it is expected that the PMU box is not functional for that
die.
Fixes: b1d9ea2e1ca4 ("perf/x86/uncore: Apply the unit control RB tree to MSR uncore units")
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20260602144908.263680-2-zide.chen@intel.com
|
|
Commit df4d29732fda ("perf/x86/amd: Change/fix NMI latency mitigation
to use a timestamp") fixed handling of late-arriving NMIs but limited
the mitigation to processors having X86_FEATURE_PERFCTR_CORE. However,
it is unclear if processors without this feature are also affected.
When Mediated vPMU is enabled on affected hardware, it is also possible
to bypass the fix inside KVM guests if X86_FEATURE_PERFCTR_CORE is
removed from the guest CPUID (e.g. using "-cpu host,-perfctr-core" with
QEMU). Hence, use the mitigation at all times.
Fixes: df4d29732fda ("perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/29a3c970da289ab8f24282933bdb36545c0403e8.1780325517.git.sandipan.das@amd.com
|
|
Add a read_snapshot() callback to struct clocksource which returns the
derived clocksource value while also providing the underlying hardware
counter reading and the related clocksource ID.
This allows ktime_get_snapshot_id() to populate new hw_cycles and hw_csid
fields in struct system_time_snapshot.
For clocksources that are derived from an underlying counter (e.g., Hyper-V
TSC page scales TSC to 10MHz, kvmclock scales TSC to 1GHz), this provides
atomic access to both the derived value needed for timekeeping
calculations, and the raw hardware counter needed by consumers like KVM's
master clock and the vmclock PTP driver.
[ tglx: Reworked it slightly ]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Assisted-by: Kiro:claude-opus-4.6-1m
Link: https://patch.msgid.link/20260526230635.136914-1-dwmw2@infradead.org
Link: https://patch.msgid.link/20260529195558.202568489@kernel.org
|
