| Age | Commit message (Collapse) | Author |
|---|
|
The generic unsafe_atomic_store_release_user() implementation does:
if (!IS_ENABLED(CONFIG_ARCH_MEMORY_ORDER_TSO))
smp_mb();
unsafe_put_user();
As x86 implements Total Store Order (TSO) which means stores imply release,
select ARCH_MEMORY_ORDER_TSO to avoid the unnecessary smp_mb().
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.564499644@kernel.org
|
|
The upcoming support for unlocking robust futexes in the kernel requires
store release semantics. Syscalls do not imply memory ordering on all
architectures so the unlock operation requires a barrier.
This barrier can be avoided when stores imply release like on x86.
Provide a generic version with a smp_mb() before the unsafe_put_user(),
which can be overridden by architectures.
Provide also a ARCH_MEMORY_ORDER_TSO Kconfig option, which can be selected
by architectures with Total Store Order (TSO), where store implies release,
so that the smp_mb() in the generic implementation can be avoided.
If that is set a barrier() is used instead of smp_mb(), which is not
required for the use case at hand, but makes it future proof for other
usage to prevent the compiler from reordering.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.513181528@kernel.org
|
|
The marker for PI futexes in the robust list is a hardcoded 0x1 which lacks
any sensible form of documentation.
Provide proper defines for the bit and the mask and fix up the usage
sites. Thereby convert the boolean pi argument into a modifier argument,
which allows new modifier bits to be trivially added and conveyed.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.458758556@kernel.org
|
|
Having all these members in mm_struct along with the required #ifdeffery is
annoying, does not allow efficient initializing of the data with
memset() and makes extending it tedious.
Move it into a data structure and fix up all usage sites.
The extra struct for the private hash is intentional to make integration of
other conditional mechanisms easier in terms of initialization and separation.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260602090535.407756793@kernel.org
|
|
Nothing fails there. Mop up the leftovers of the early version of this,
which did an allocation.
While at it clean up the stubs and the #ifdef comments to make the header
file readable.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260602090535.356789395@kernel.org
|
|
Having all these members in task_struct along with the required #ifdeffery
is annoying, does not allow efficient initializing of the data with
memset() and makes extending it tedious.
Move it into a data structure and fix up all usage sites.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.308220888@kernel.org
|
|
Slapping __percpu_qual into the next available header is sloppy at best.
It's required by __percpu which is defined in compiler_types.h and that is
meant to be included without requiring a boatload of other headers so that
a struct or function declaration can contain a __percpu qualifier w/o
further prerequisites.
This implicit dependency on linux/percpu.h makes that impossible and causes
a major problem when trying to separate headers.
Create asm/percpu_types.h and move it there. Include that from
compiler_types.h and the whole recursion problem goes away.
Fix up UM so it uses the generic header and includes it in the UM_HOST
build, which pulls in compiler_types.h. The USER_CFLAGS fix was suggested
by Richard.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260602090535.254874125@kernel.org
|
|
The unconditional guard destructors check whether the lock pointer is
NULL before unlocking. This check is dead code because unconditional
guards guarantee a non-NULL lock pointer at destructor time.
DEFINE_GUARD() runs the lock operation unconditionally in the
constructor. If the pointer were NULL, the lock operation (e.g.
mutex_lock(NULL)) would crash before the constructor returns. The
destructor never runs with a NULL pointer. All DEFINE_GUARD() users
dereference the pointer in their lock. Verified by auditing every
instance found by: git grep -n -A 1 'DEFINE_GUARD('. The only exception
is xe_pm_runtime_release_only, whose constructor is a noop, but it has
no callers.
__DEFINE_UNLOCK_GUARD() has only a few usages outside of
include/linux/cleanup.h: tty_port_tty (NULL-checks in its tty_kref_put()
call), irqdesc_lock (fixed earlier) and two guards in
kernel/sched/sched.h (dereference the pointer unconditionally in their
lock constructors).
DEFINE_LOCK_GUARD_1() sets .lock from its argument and runs the lock
operation in the constructor. Same reasoning applies. All
DEFINE_LOCK_GUARD_1() users dereference the pointer in their lock. Also,
verified by auditing every match of: git grep -n 'DEFINE_LOCK_GUARD_1('.
DEFINE_LOCK_GUARD_0() hardcodes .lock = (void *)1 in the constructor,
so it is never NULL by construction.
Conditional (_try) variants: DEFINE_GUARD_COND() and
DEFINE_LOCK_GUARD_1_COND() use EXTEND_CLASS_COND(), whose wrapper
destructor returns early when the lock was not acquired, before reaching
the base destructor since commit 2deccd5c862a ("cleanup: Optimize
guards"):
if (_cond) return; class_##_name##_destructor(_T);
As compiled by GCC-11 with defconfig on top of the locking/core:
Total: Before=23889980, After=23834334, chg -0.23%
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/0503a089389b2270c478a873e095cf0a4ff26d24.1780064327.git.d@ilvokhin.com
|
|
Add __nonnull_args() to unconditional guard constructors so the compiler
warns when NULL is statically known to be passed:
- DEFINE_GUARD(): re-declare the constructor with __nonnull_args().
- __DEFINE_LOCK_GUARD_1(): annotate the constructor directly.
DEFINE_LOCK_GUARD_0() needs no annotation: its constructor takes no
pointer arguments (.lock is hardcoded to (void *)1).
Define the __nonnull_args() macro in compiler_attributes.h, following
the existing convention for attribute wrappers. Deliberately not named
'__nonnull', to avoid clashing with glibc's __nonnull() when kernel and
userspace headers are combined (User Mode Linux for example).
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/85fee12eec20abfcf711443518e8f0caec982a86.1780064327.git.d@ilvokhin.com
|
|
irqdesc_lock uses __DEFINE_UNLOCK_GUARD() directly with a custom
constructor that can set .lock to NULL.
In preparation for removing the NULL check from __DEFINE_UNLOCK_GUARD(),
move the NULL check into the irqdesc_lock unlock expression, making the
NULL handling explicit at the call site.
No functional change.
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/ab457810653e4356e29b2d74ba616478bd9328ad.1780064327.git.d@ilvokhin.com
|
|
The nvdimm_bus guard accepts NULL and skips locking when NULL is passed.
Convert from DEFINE_GUARD() to DEFINE_CLASS() + DEFINE_CLASS_IS_GUARD().
This is a preparatory change for making DEFINE_GUARD() constructors
__nonnull_args(). nvdimm_bus legitimately passes NULL, so it must be
adjusted to avoid a compile error.
No functional change.
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/8c0417904d280896ecf2e9923ffa9f20076f59b8.1780064327.git.d@ilvokhin.com
|
|
The WW-mutex selftests deliberately exercise failing lock paths. On
PREEMPT_RT, some of those paths enter the RT-mutex scheduler helpers.
The change referenced by the Fixes tag made those helpers track RT-mutex
scheduling state in current->sched_rt_mutex. The bit is normally cleared by
the matching post-schedule helper, but some WW-mutex selftests disable
the runtime debug_locks flag before that happens. With debug_locks cleared,
lockdep_assert() does not evaluate the expression that clears the bit,
leaving stale state for the next testcase.
With CONFIG_PREEMPT_RT=y and CONFIG_DEBUG_LOCKING_API_SELFTESTS=y, that
stale state produces warnings such as:
WARNING: kernel/sched/core.c:7557 at rt_mutex_pre_schedule+0x26/0x2d
RIP: 0010:rt_mutex_pre_schedule+0x26/0x2d
Save and restore current->sched_rt_mutex around each testcase, matching the
existing PREEMPT_RT cleanup for task-local migration and RCU state.
Fixes: d14f9e930b90 ("locking/rtmutex: Use rt_mutex specific scheduler helpers")
Assisted-by: Codex:gpt-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260523185123.17482-3-kmehltretter@gmail.com
|
|
The lockdep selftests deliberately run unbalanced locking patterns.
dotest() restores the task state they leave behind before running the
next testcase.
On PREEMPT_RT, spin_lock() uses migrate_disable() instead of disabling
preemption. dotest() cleans up the resulting migration-disabled state, but
that cleanup is still guarded by CONFIG_SMP.
That used to match the scheduler data model, where migration_disabled was
also CONFIG_SMP-only. The commit referenced below made SMP scheduler state
unconditional, so CONFIG_SMP=n PREEMPT_RT kernels with
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y report success from the selftests and
then trip over stale current->migration_disabled state:
releasing a pinned lock
bad: scheduling from the idle thread!
Kernel panic - not syncing: Fatal exception
Save and restore current->migration_disabled for every PREEMPT_RT build.
Fixes: cac5cefbade9 ("sched/smp: Make SMP unconditional")
Assisted-by: Codex:gpt-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260523185123.17482-2-kmehltretter@gmail.com
|
|
For CONFIG_NR_CPUS < 16K, _Q_PENDING_BITS is 8 and the pending
field occupies bits 8-15 of the lock word. The current comment
documents bit 8 as pending and bits 9-15 as unused, which describes
the pending flag value rather than the field layout.
Describe bits 8-15 as the pending byte so the layout description
is consistent with the lock byte.
Signed-off-by: WEI-HONG, YE <1234567weewee457@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://patch.msgid.link/20260525130450.723937-1-1234567weewee457@gmail.com
|
|
While bringing up the PowerVR GPU on the A733 (Radxa Cubie A7Z), we
found that one of the GPU power domains must be configured as "always
on." While the Radxa BSP device tree leaves the GPU power domain nodes
commented out, the GPU driver code contains traces indicating an "always
on" requirement [1].
Currently, sunxi_pck600_desc only supports specifying pd_names. This
patch introduces sunxi_pck600_pd_desc, which stores both the name and
its associated flags. This also (more or less) aligns the implementation
with the existing sun50i PPU handling of always-on domains.
With this change, individual power domains can now be configured more
granularly. In particular, the GPU_CORE domain in sun60i_a733_pck600_pds
can now be explicitly marked with GENPD_FLAG_ALWAYS_ON.
The patch was tested on the Radxa Cubie A7Z, where the GPU now functions
as expected.
Thanks to Icenowy for her support and expertise on sunxi and PowerVR,
and thanks to Mikhail for identifying this exact cause of the GPU
bring-up issue.
[1] https://github.com/radxa/allwinner-bsp/blob/cubie-aiot-v1.4.6/modules/gpu/img-bxm/linux/rogue_km/services/system/rogue/rgx_sunxi/sunxi_platform.c#L62
Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Driver core expects devices to be dynamically allocated and will, for
example, complain loudly if a device that lacks a release function is
ever freed.
Use root_device_register() to allocate and register the root device
instead of open coding using a static device.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Document the RPMh power domain for Nord SoC, and add definitions for
the new power domains present on Nord SoC.
- RPMHPD_NSP3: power domain for the 4th NSP subsystem
- RPMHPD_GFX1: power domain for the 2nd GFX subsystem
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Some RPMHPD_* defines in the Generic RPMH Power Domain Indexes section
were using spaces instead of tabs for alignment. Fix them to be
consistent with the rest of the file.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Take proper references for hw color blobs (degamma_lut, gamma_lut,
ctm, lut_3d) in intel_plane_duplicate_state() and drop them in
intel_plane_destroy_state().
v2:
- handle blobs in hw state clear
Cc: <stable@vger.kernel.org> #v6.19+
Fixes: 3b7476e786c2 ("drm/i915/color: Add framework to program PRE/POST CSC LUT")
Fixes: a78f1b6baf4d ("drm/i915/color: Add framework to program CSC")
Fixes: 65db7a1f9cf7 ("drm/i915/color: Add 3D LUT to color pipeline")
Reviewed-by: Pranay Samala <pranay.samala@intel.com> #v1
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20260601082953.128539-4-chaitanya.kumar.borah@intel.com
(cherry picked from commit c6eea1925154b6697fe22b217faab9bb30635e6b)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Add support for using the TI Dual-Mode Timer for clockevents. The second
always on device with the "ti,timer-alwon" property is selected to be
used for clockevents. The first one is used as clocksource.
This allows clockevents to be setup independently of the CPU.
Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260508-topic-ti-dm-clkevt-v6-16-v5-3-61d546a0aff9@baylibre.com
|
|
Add support for using the TI Dual-Mode Timer as a clocksource. The
driver automatically picks the first timer that is marked as always-on
on with the "ti,timer-alwon" property to be the clocksource.
The timer can then be used for CPU independent time keeping.
Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260508-topic-ti-dm-clkevt-v6-16-v5-2-61d546a0aff9@baylibre.com
|
|
ti,always-on property doesn't exist. ti,timer-alwon is meant here. Fix
this minor bug in the comment.
Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://patch.msgid.link/20260508-topic-ti-dm-clkevt-v6-16-v5-1-61d546a0aff9@baylibre.com
|
|
The arm,arch_timer DT binding is extremely imprecise in describing
the requirements for interrupts.
Follow the architecture by making it explicit that:
- the EL1 secure timer irq is required if EL3 is implemented
- the EL1 physical timer irq is always required
- the EL1 virtual timer irq is always required
- the EL2 physical timer irq is required if EL2 is implemented
- the EL2 virtual timer irq is required if FEAT_VHE is implemented
The consequence of the above is that the minimum number of interrupts
to be described is 2, and not 1.
Finally, clean up the description which made the assumption that
the timers are plugged into a GIC (unfortunately, that's not always
true), drop the MMIO nonsense that has long be moved to a separate
binding, and use the architectural terminology to describe the various
interrupts.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260523140242.586031-5-maz@kernel.org
|
|
running VHE
When running with at EL2 with VHE enabled, the architecture provides
two EL2 timer/counters, dubbed physical and virtual. Apart from their
names, they are strictly identical.
However, they don't get virtualised the same way, specially when
it comes to adding arbitrary offsets to the timers. When running as
a guest, the host CNTVOFF_EL2 does apply to the guest's view of
CNTHV*_El2. This is not true for CNTPOFF_EL2 and CNTHP*_EL2, as
the architecture is broken past the first level of virtualisation
(it lacks some essential mechanisms to be usable, despite what
the ARM ARM pretends).
This means that when running as a L2 guest hypervisor, using the
physical timer results in traps to L0, which are then forwarded to
L1 in order to emulate the offset, leading to even worse performance
due to massive trap amplification (the combination of register and
ERET trapping is absolutely lethal).
Switch the arch timer code to using the virtual timer when running
in VHE by default, only using the physical timer if the interrupt
is not correctly described in the firmware tables (which seems
to be an unfortunately common case). This comes as no impact on
bare-metal, and slightly improves the situation in the virtualised
case.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260523140242.586031-4-maz@kernel.org
|
|
Now that we have a way to identify GTDTv3, allow the information
related to the EL2 virtual timer to be retrieved by the interface
used by the architected timer driver.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://patch.msgid.link/20260523140242.586031-3-maz@kernel.org
|
|
Since ARMv8.1, the architecture has grown an EL2-private virtual
timer. This has been described in ACPI since ACPI v6.3 and revision
3 of the GTDT table.
An aditional structure was added in ACPICA, though in a rather
bizarre way, and merged in v5.1 as 8f5a14d053100 ("ACPICA: ACPI 6.3:
add GTDT Revision 3 support").
Finally plug the table parsing in GTDT, and correct the parsing of
the platform timer subtables to account for the expanded size of
the base table. This also comes with some extra sanitisation of
the table, in the unlikely case someone got it wrong...
Suggested-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Link: https://patch.msgid.link/20260523140242.586031-2-maz@kernel.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
wifi: iwlwifi: fixes - 2026-05-31
Miri Korenblit says:
====================
This contains a few fixes:
- Don't grab nic access in non-fast-resume
- Don't send a large hcmd than transport supports
- In AP mode, don't send tx power constraints command before activating
the link
- Don't do sw reset handshake on older firmwares.
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's
supposed to be released at ___cfg80211_scan_done() but this doesn't happen
as rdev->scan_req is NULL at that point, too, leading to the early return
from the freeing function.
unreferenced object 0xffff8881161d0800 (size 512):
comm "wpa_supplicant", pid 379, jiffies 4294749765
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................
backtrace (crc c867fdb6):
kmemleak_alloc+0x89/0x90
__kmalloc_noprof+0x2fd/0x410
cfg80211_scan+0x133/0x730
nl80211_trigger_scan+0xc69/0x1cc0
genl_family_rcv_msg_doit+0x204/0x2f0
genl_rcv_msg+0x431/0x6b0
netlink_rcv_skb+0x143/0x3f0
genl_rcv+0x27/0x40
netlink_unicast+0x4f6/0x820
netlink_sendmsg+0x797/0xce0
__sock_sendmsg+0xc4/0x160
____sys_sendmsg+0x5e4/0x890
___sys_sendmsg+0xf8/0x180
__sys_sendmsg+0x136/0x1e0
__x64_sys_sendmsg+0x76/0xc0
x64_sys_call+0x13f0/0x17d0
Found by Linux Verification Center (linuxtesting.org).
Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260601094157.92703-1-pchelkin@ispras.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Normally ->s_dentry is cleared when dentry it's pointing to becomes
negative (on eviction, realistically). However, that only happens
if dentry gets to be positive in the first place; in case of inode
allocation failure dentry never becomes positive, so ->d_iput()
is not called at all.
We do part of what normally would've been done by configfs_d_iput()
(dropping the reference to configfs_dirent) manually, but we do
not clear ->s_dentry there. Sloppy as it is, it does not matter in
case of configfs_create_{dir,link}() - there configfs_dirent does
not survive dropping the sole reference to it.
However, for configfs_lookup() it *does* survive, with a dangling
pointer to soon to be freed dentry sitting it its ->s_dentry.
Subsequent getdents(2) in that directory will end up dereferencing
that pointer in order to pick the inode number. Use after free...
This is the minimal fix; the right approach is to set the linkage
between dentry and configfs_dirent only after we know that we have
an inode, but that takes more surgery and the bug had been there
since 2006, so...
Fixes: 3d0f89bb1694 ("configfs: Add permission and ownership to configfs objects") # 2.6.16-rc3
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add a no_irq_wake flag to struct tsens_plat_data to allow platforms
to control whether TSENS interrupts should be configured as wakeup
sources.
Create a new data_automotive structure and add compatible strings for
automotive TSENS variants (SA8775P, SA8255P) with wakeup interrupts
disabled.
Automotive platforms can enter a low-power parking suspend state where the
application processors and thermal mitigation paths are not active. In this
state, waking the system due to TSENS threshold interrupts does not enable
useful thermal action, but it does repeatedly break suspend residency and
increase battery drain.
Allow these automotive variants to keep TSENS monitoring enabled during
normal runtime while opting out of TSENS wakeup interrupts during suspend,
so the system can remain in low power until ignition/resume.
Signed-off-by: Priyansh Jain <priyansh.jain@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260601-tsens_interrupt_wake_control-v2-2-ce9570946abd@oss.qualcomm.com
|
|
This change improves power management by using the standardized PM
framework for wake IRQ handling.
Move wake IRQ control to the PM suspend/resume path:
- store uplow/critical IRQ numbers in struct tsens_priv
- enable wake IRQs in tsens_suspend_common() when wakeup is allowed
- disable wake IRQs in tsens_resume_common()
- mark the device wakeup-capable during probe
This aligns TSENS wake behavior with suspend flow and avoids keeping
wake IRQs permanently enabled during runtime.
Signed-off-by: Priyansh Jain <priyansh.jain@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260601-tsens_interrupt_wake_control-v2-1-ce9570946abd@oss.qualcomm.com
|
|
Even it is very unlikely the thermal framework is disabled, the newly
added devm_thermal_cooling_device_register() function has not the stub
when the thermal framework is optout in the kernel.
Add it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605301554.S9n45bfQ-lkp@intel.com/
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260601090152.1243983-2-daniel.lezcano@kernel.org
|
|
Extend the thermal cooling device binding to support a 3 cells specifier
along with the 2 cells format.
Update #cooling-cells property to enum to support both 2 and 3 arguments.
Fix pwm-fan.yaml to restrict the number of cells to 'const: 2'
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-22-daniel.lezcano@oss.qualcomm.com
|
|
Extend the cooling device specifier parsing to support an optional
cooling device identifier (cdev_id).
Two formats are now supported:
- Legacy format:
<&cdev lower upper>
- Indexed format:
<&cdev cdev_id lower upper>
When the indexed format is used, both the device node and the
cdev_id must match in order to bind a cooling device to a thermal
zone. The legacy format continues to match on the device node only,
preserving backward compatibility.
Update the parsing logic accordingly to handle both formats and
extract the mitigation limits from the appropriate arguments.
This is a preparatory step for upcoming DT bindings describing
cooling devices using (device node, id) tuples instead of child
nodes.
No functional change for existing device trees.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-21-daniel.lezcano@oss.qualcomm.com
|
|
Extend the OF cooling device registration to support an explicit
cooling device identifier (cdev_id), preparing for upcoming DT
bindings where cooling devices are identified by a tuple (device node,
id) instead of relying on child nodes.
Introduce a new helper:
devm_thermal_of_cooling_device_register()
which registers a cooling device using the device's of_node and an
explicit cdev_id. This complements the existing
devm_thermal_of_child_cooling_device_register() helper, which
remains dedicated to the legacy child-node based bindings.
Internally, factorize the devm registration logic into a common
helper to avoid code duplication.
Existing users are unaffected, as the child-based helper continues
to pass a default cdev_id of 0, preserving current behavior.
This change is a preparatory step for supporting indexed cooling
devices in thermal OF bindings.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-20-daniel.lezcano@oss.qualcomm.com
|
|
Introduce an identifier (cdev_id) for cooling devices registered from
device tree.
This prepares support for a new DT binding where cooling devices are
identified by a tuple (device node, ID), instead of relying on child
nodes.
Existing users are updated to pass a default ID of 0, preserving the
current behavior.
Future changes will extend the cooling map parsing to match cooling
devices based on both the device node and the ID.
No functional change intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-19-daniel.lezcano@oss.qualcomm.com
|
|
To clarify that the function operates on child nodes, rename:
devm_thermal_of_cooling_device_register()
|
v
devm_thermal_of_child_cooling_device_register()
Used the command:
find . -type f -name '*.[ch]' -exec \
sed -i 's/devm_thermal_of_cooling_device_register/\
devm_thermal_of_child_cooling_device_register/g' {} \;
Did not used clang-format-diff because it does not indent correctly
and checkpatch complained. Manually reindented to make checkpatch
happy
This prepares for upcoming support of cooling devices identified by
an ID rather than device tree child nodes.
No functional change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-18-daniel.lezcano@oss.qualcomm.com
|
|
The device node pointer stored in struct thermal_cooling_device is
only used by the OF-specific thermal code to associate cooling devices
with thermal zones defined in device tree.
Now that OF and non-OF registration paths are separated and non-OF
users no longer rely on devm_thermal_of_cooling_device_register() with
a NULL device node, the np field is no longer required for non-OF
configurations.
Make this field conditional on CONFIG_THERMAL_OF to reduce memory
footprint and better reflect its usage.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20260526140802.1059293-16-daniel.lezcano@oss.qualcomm.com
|
|
The functions:
- thermal_of_cooling_device_register()
- devm_thermal_of_cooling_device_register()
are specific to device tree usage but are currently implemented in
thermal_core.c.
Move them to thermal_of.c to better reflect the separation between
generic thermal core code and OF-specific logic.
This change is enabled by the recent split of the cooling device
registration into allocation and addition phases, allowing OF-specific
handling (such as device node assignment) to be isolated from the core.
No functional change intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-17-daniel.lezcano@oss.qualcomm.com
|
|
Some HWMON drivers register cooling devices using the OF helper
devm_thermal_of_cooling_device_register() with a NULL device node.
With the introduction of a dedicated non-OF registration API,
switch these users to devm_thermal_cooling_device_register()
to make the intent explicit and avoid relying on OF-specific helpers.
This is a pure refactoring with no functional change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-15-daniel.lezcano@oss.qualcomm.com
|
|
Introduce a device-managed variant of the non-OF cooling device
registration API.
This complements devm_thermal_of_cooling_device_register() and allows
non-device-tree users to register cooling devices with automatic
cleanup tied to the device lifecycle.
The helper relies on devm_add_action_or_reset() to release the cooling
device via thermal_cooling_device_release() on driver detach or probe
failure.
This keeps the API consistent across OF and non-OF users and avoids
manual cleanup in error paths.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-14-daniel.lezcano@oss.qualcomm.com
|
|
Split the cooling device registration API into OF and non-OF variants.
Introduce thermal_cooling_device_register() for non-device-tree users
and rework thermal_of_cooling_device_register() to use the new
alloc/add split.
This removes the need for the internal __thermal_cooling_device_register()
helper and makes the separation between OF and non-OF users explicit.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-13-daniel.lezcano@oss.qualcomm.com
|
|
The SoC Thermal Management Unit (TMU) is essential for proper operation
of the SoCs. Kernel should not ask users choice of drivers when that
choice is obvious and known to the developers that answer should be
'yes' or 'module'.
Impact of making it default:
1. arm64 defconfig: No changes, already present in defconfig.
2. arm32: No changes, the driver is already selected by MACH_EXYNOS.
3. COMPILE_TEST builds: enable by default for arm32 or arm64 builds,
whenever ARCH_EXYNOS is selected. This has impact on build time and
feels logical, because if one selects ARCH_EXYNOS then probably by
default wants to build test it entirely. Kernels with COMPILE_TEST
are not supposed to be used for booting.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260526135312.8697-2-krzysztof.kozlowski@oss.qualcomm.com
|
|
Invalid temperature measurements may be observed across the temperature
range specified in the device data sheet. The invalid temperature can
be read from any remote site and from any capture or report registers.
The invalid change in temperature can be positive or negative and the
resulting temperature can be outside the calibrated range, in which
case the TSR[ORL] or TSR[ORH] bit will be set.
Workaround:
Use the raising/falling edge threshold to filter out the invalid temp.
Check the TIDR register to make sure no jump happens When reading the temp.
i.MX93 ERR052243:
(https://www.nxp.com/webapp/Download?colCode=IMX93_2P87F&appType=license)
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260430-imx93_tmu-v6-3-485459d7b54f@nxp.com
|
|
For Thermal monitor unit(TMU) used on i.MX93, the HW revision info read
from the ID register is the same the one used on some of the QorIQ
platform, but the config has some slight differance. Add i.MX93 compatible
string and corresponding code for it.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260430-imx93_tmu-v6-2-485459d7b54f@nxp.com
|
|
Add i.MX93 compatible string 'fsl,imx93-tmu' because Thermal monitor
unit(TMU) on i.MX93 has differences with QorIQ platform and not fully
compatible with existing Platform, such as fsl,qoriq-tmu.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20260430-imx93_tmu-v6-1-485459d7b54f@nxp.com
|
|
The thermal sensor on K1 supports monitoring five temperature zones.
The driver registers these sensors with the thermal framework
and supports standard operations:
- Reading temperature (millidegree Celsius)
- Setting high/low thresholds for interrupts
Signed-off-by: Shuwei Wu <shuwei.wu@mailbox.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Yao Zi <me@ziyao.cc>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Vincent Legoll <legoll@online.fr> # OrangePi-RV2
Tested-by: Gong Shuai <gsh517025@gmail.com>
Link: https://patch.msgid.link/20260427-k1-thermal-v5-2-df39187480ed@mailbox.org
|
|
Document the SpacemiT K1 Thermal Sensor, which supports
monitoring temperatures for five zones: soc, package, gpu, cluster0,
and cluster1.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shuwei Wu <shuwei.wu@mailbox.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.or>
Link: https://patch.msgid.link/20260427-k1-thermal-v5-1-df39187480ed@mailbox.org
|
|
The checkpatch tool warns against splitting quoted strings across
multiple lines. Join the dev_info message into a single line to
improve the ability to grep for the message in the source.
Signed-off-by: Mayur Kumar <kmayur809@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260511174255.215207-1-kmayur809@gmail.com
|
