| Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Mark the Meson GPIO controller as sleeping to avoid a
context splat
- Fix up the I2S2 and SWR TX group settings in the
Qualcomm SM8350 LPASS pin controller, and implement the
proper .get_direction() callback
- Fix a pin typo in the TG1520 pin controller
- Fix a group name in the Marvell armada 3710 XB pin
controller that got mangled in a DT schema rewrite
* tag 'pinctrl-v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: marvell,armada3710-xb-pinctrl: fix 'usb32_drvvbus0' group name
pinctrl: lpass-lpi: implement .get_direction() for the GPIO driver
pinctrl: th1520: Fix typo
pinctrl: qcom: sm8350-lpass-lpi: Merge with SC7280 to fix I2S2 and SWR TX pins
pinctrl: meson: mark the GPIO controller as sleeping
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindgings changes for 6.20:
- New board compatibles for i.MX93 11x11 FRDM, Apalis iMX8QP, i.MX91 FRDM,
ifm VHIP4 EvalBoard v1 and v2, TQ-Systems MBLS1028A/MBLS1028A-IND,
i.MX952 EVK, i.MX8MP FRDM
- Add vendor prefix for ifm electronic gmbh
- A couple of small changes for fsl,imx-gpc.yaml and tcg,tpm-tis-i2c.yaml
* tag 'imx-bindings-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
dt-bindings: arm: fsl: Document ifm VHIP4 EvalBoard v1 and v2
dt-bindings: vendor-prefixes: Document ifm electronic gmbh
dt-bindings: arm: fsl: Add FRDM-IMX91 board
dt-bindings: tpm: Add st,st33tphf2ei2c
dt-bindings: arm: fsl: Add Apalis iMX8QP
dt-bindings: arm: fsl: add i.MX952 EVK board
dt-bindings: arm: fsl: add i.MX93 11x11 FRDM board
dt-bindings: power: fsl,imx-gpc: Document address-cells
dt-bindings: arm: fsl: Add i.MX8MP FRDM board
dt-bindings: arm: fsl: add TQ-Systems boards MBLS1028A and MBLS1028A-IND
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.20-rc1
This series updates various DT bindings for Tegra architecture,
primarily focusing on schema validation fixes and new feature
documentation for Tegra234 and Tegra264 SoCs. Key changes include
converting Tegra20 NAND bindings to YAML, and updating memory, DMA, and
IOMMU definitions for Tegra264 (introducing CMDQV and DBB clock
support). Additionally, it resolves legacy warnings for Tegra30/132
display and VI interfaces.
* tag 'tegra-for-6.20-dt-bindings-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: display: tegra: document Tegra30 VI and VIP
dt-bindings: display: tegra: document Tegra132 MIPI calibration device
dt-bindings: mtd: nvidia,tegra20-nand: convert to DT schema
dt-bindings: dma: Update ADMA bindings for tegra264
dt-bindings: iommu: Add NVIDIA Tegra CMDQV support
dt-bindings: memory: tegra: Document DBB clock for Tegra264
dt-bindings: tegra: pmc: Update aotag as an optional aperture
|
|
Merge series from Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>:
This patch series improves handling of SPI controllers that are
shared by spi-mem devices and other SPI peripherals.
The primary goal of this series is to support non-spi-mem devices in
the ASPEED FMC/SPI controller driver. It also addresses an issue in
the spi-mem framework observed when different types of SPI devices
operate concurrently on the same controller, ensuring that spi-mem
operations are properly serialized.
|
|
Document the optional nxp,enable-termination-resistor property for the
i.MX LVDS display bridge.
This boolean property indicates that the built-in 100 Ohm termination
resistor on the LVDS output is enabled. It is controlled via the HS_EN
bit in the LVDS_CTRL register. Enabling the resistor can improve LVDS
signal quality and may prevent visual artifacts on some boards, but
increases the power consumption.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20260120231930.2782444-1-festevam@gmail.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Changes for v6.20
GPU:
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- Fixes
DPU:
- Switched to use virtual planes by default
- Fixed DSI CMD panels on DPU 3.x
- Rewrote format handling to remove intermediate representation
- Fixed watchdog on DPU 8.x+
- Fixed TE / Vsync source setting on DPU 8.x+
- Added 3D_Mux on SC7280
- Kaanapali platform support
- Fixed UBWC register programming
- Made RM reserve DSPP-enabled mixers for CRTCs with LMs.
- Gamma correction support
DP:
- Enabled support for eDP 1.4+ link rate tables
- Fixed MDSS1 DP indices on SA8775P, making them to work
- Fixed msm_dp_ctrl_config_msa() to work with LLVM 20
DSI:
- Documented QCS8300 as compatible with SA8775P
- Kaanapali platform support
DSI PHY:
- switched to divider_determine_rate()
MDP5:
- Dropped support for MSM8998, SDM660 and SDM630 (switched over
to DPU)
MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV03Sbeca93A+gGh-TKpzFYVabbkWVgPCCicG0_NQG+5Y2A@mail.gmail.com
|
|
Linux 6.19-rc7
This is needed for msm and rust trees.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Merge series from "Anton D. Stavinskii" <stavinsky@gmail.com>:
This patch series adds basic audio support for Sophgo CV1800B,
as used on boards such as the Milk-V Duo.
The series introduces the I2S controller driver,
the DAC and ADC codec drivers, corresponding DT bindings,
and DTS updates to wire the components together.
The implementation is based on vendor documentation
and testing on real hardware. This series relies on
recent fixes in the DesignWare AXI DMA support;
in particular, correct operation depends on
the DMA changes discussed at:
https://lore.kernel.org/all/20251214224601.598358-1-inochiama@gmail.com/
The current driver implementation supports a fixed audio configuration
of 48 kHz sample rate and only I2S protocol which is used in codecs.
The series has been tested on the Milk-V Duo 256M board using
the Sophgo SG2002 SoC. The implementation is expected to also work on
Milk-V Duo and Milk-V Module boards based on the SG2000 SoC,
as the audio and DMA blocks are closely related.
Known hardware limitation:
On CV1800B / SG2002, the I2S2 output pins cannot be enabled via
pinctrl alone. Due to SoC design constraints, the output path becomes
functional only after additional vendor-specific register programming.
This series makes the limitation explicit and does not attempt
to work around it implicitly via pinctrl or undocumented behavior.
|
|
Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>:
The main goal is to convert drivers to use GPIO descriptors. While reading
the code, I think it is time to remove ak4641 and pxa2xx-ac97 driver,
more info could be found in commit log of each patch.
Then only need to convert sound/arm/pxa2xx-ac97-lib.c to use GPIO
descriptors. Not have hardware to test the pxa2xx ac97.
|
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
Enable AUDMIX on i.MX952 platform, update dt binding document and
driver.
SAI is connected to AUDMIX, and the AUDMIX can be bypassed, so
add 'fsl,sai-amix-mode' property in SAI binding document for this
case.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull CPUFreq Arm updates for 7.0 from Viresh Kumar:
"- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio).
- Minor improvements to the cpufreq / cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen).
- Add support for AM62L3 SoC to ti-cpufreq driver (Dhruva Gole).
- Update FIE arch_freq_scale in ticks for non-PCC regs (Jie Zhan).
- Other minor cleanups / improvements (Felix Gu, Juan Martinez, Luca
Weiss, and Sergey Shtylyov)."
* tag 'cpufreq-arm-updates-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
cpufreq: CPPC: Update FIE arch_freq_scale in ticks for non-PCC regs
cpufreq: CPPC: Factor out cppc_fie_kworker_init()
ACPI: CPPC: Factor out and export per-cpu cppc_perf_ctrs_in_pcc_cpu()
rust: cpufreq: replace `kernel::c_str!` with C-Strings
cpufreq: Add Tegra186 and Tegra194 to cpufreq-dt-platdev blocklist
dt-bindings: cpufreq: qcom-hw: document Milos CPUFREQ Hardware
rust: cpufreq: add __rust_helper to helpers
rust: cpufreq: always inline functions using build_assert with arguments
|
|
Document the internal ADC and DAC audio codecs integrated
in the Sophgo CV1800B SoC.
Signed-off-by: Anton D. Stavinskii <stavinsky@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260120-cv1800b-i2s-driver-v4-3-6ef787dc6426@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are 4 TDM controllers on the SoC. Each controller can receive or
transmit data over DMA. The dma it self has 8 channels.
Each channel can be connected only to a specific i2s node. But each
of dma channel can have multiple purposes so in order to save dma
channels the configurations allows to use tx and rx, only rx, only tx
or none channels. I2S controller without channels can be useful in
configuration where I2S is used as clock source only and doesn't
produce any data.
Signed-off-by: Anton D. Stavinskii <stavinsky@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260120-cv1800b-i2s-driver-v4-1-6ef787dc6426@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible strings for the Intel GSW150 which is apparently
identical or at least compatible with the Lantiq PEB7084 Ethernet
switch IC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/1dc62de5263e8536d5960b837bc5dad7b8f42fad.1769099517.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ethernet PHYs should use nodes named 'ethernet-phy@'.
Rename the Ethernet PHY nodes in the example to comply.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/94f439aa17d7b51fb367877df4fb84c8c07c7ce4.1769099517.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The AST2700 is the 7th generation SoC from Aspeed, featuring two SGPIO
master controllers: both with 256 serial inputs and outputs.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20260123-upstream_sgpio-v2-5-69cfd1631400@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
group name
The trailing '0' character of the 'usb32_drvvbus0' pin group got removed
during converting the bindings to DT schema.
$ git grep -n usb32_drvvbus v6.18
v6.18:Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt:106:group usb32_drvvbus0
v6.18:drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:195: PIN_GRP_GPIO("usb32_drvvbus0", 0, 1, BIT(0), "drvbus"),
$ git grep -n usb32_drvvbus v6.19-rc1
v6.19-rc1:Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml:91: usb2_drvvbus1, usb32_drvvbus ]
v6.19-rc1:drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:195: PIN_GRP_GPIO("usb32_drvvbus0", 0, 1, BIT(0), "drvbus"),
Add it back to match the group name with the one the driver expects.
Fixes: c1c9641a04e8 ("dt-bindings: pinctrl: Convert marvell,armada-3710-(sb|nb)-pinctrl to DT schema")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Document LAN969x compatibles for SGPIO.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add documentation for the compatibles designated for the following SKUs
in the LAN9645x family:
lan96455f
lan96457f
lan96459f
with fallback a compatible for the smallest 5-ported SKUs lan96455f.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Document the CPUFREQ Hardware on the Milos SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
For SM-based SoCs (i.e. MX95, MX943), GPR configuration is performed by
the SM coprocessor. Thus, GPR is transparent to the software and does not
need to be described in the devicetree. Make it optional.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://patch.msgid.link/20260126145537.2301-2-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document compatible string for the QFPROM on SM8750 platform.
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260116170846.733558-5-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update the bindings to allow setting per-line interrupt-types.
Some Interrupt Router instances can only work with a specific trigger
type (edge or level), while others act as simple passthroughs that
preserve the source interrupt type unchanged.
Make "ti,intr-trigger-type" property optional, with its absence
indicating that the router acts as a passthrough. When absent,
"#interrupt-cells" must be 2 to allow each interrupt source to specify
its trigger type per-line.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260123-ul-driver-i2c-j722s-v4-1-b08625c487d5@ti.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree for v6.20
Introduce the Kaanapali SoC, with the MTP and QRD devices. Introduce
support for the Milos SoC (SM7635) and initial support for the Fairphone
(Gen 6) device on this platform.
Add the QCS6490-based RubikPI3 board, the QRB2210-based Arduino UnoQ,
the X Elite-based Medion SPRCHRGD 14 S1 and Surface Pro 11 laptops, and
the SDM845-based Pixel 3 and Pixel 3 XL devices.
On the Kodiak-based (QCS6490) RB3Gen2 the TC9563 PCIe switch controller
is described.
On Lemans (SA8775P/QCS9075) the GPU and crypto blocks are added.
IO-regions and clocks are added to interconnect nodes to allow QoS
configuration. GPU, TPM and USB support are enabled on the evaluation
kit (EVK).
On Monaco (QCS8300) the two PCIe controllers, the camera subsystem,
tsens, display subsystem, crypto, CPUfreq, and coresight are added. On
the evaluation kit (EVK) the PCIe busses are enabled, together with an
AMC6821-based fan controller and the ST33 TPM chip.
On MSM8939 the camera subsystem is described. The Asus ZenFone 2
Laser/Selfie gains battery and hall sensor support.
On the Agatti-based RB1 board PM8008 is described and an overlay for the
Vision mezzanine is introduced.
On SDM630 the compute DSP remoteproc, FastRPC and related entites are
described. The LPASS LPI pinctrl node is described.
On SDM845-based OnePlus device the bootloader framebuffer and its
resources are described, to improve the transition. On the SDM845-based
devices from OnePlus, SHIFT, and Xiaomi ath10k calibration variants are
specified. The sensor remoteproc is enabled on Xiaomi Pocophone F1.
On SM7225-based Fairphone FP4 regulators for the cameras are described,
and the camera EEPROM is added.
On SM8650 the camera subsystem is described. On the QRD the Samsung
S5KJN1 camera sensor is added, and for the HDK an overlay for the "Rear
Camera Card" is added.
On SM8750 CPUfreq, SDCHCI and Iris (video encode/decode) support are
added, and missing - required - properties for the BAM DMA is added.
These are then enabled on the MTP.
On Talos (SM6150/QCS615) PMU, DisplayPort, and USB/DP combo PHY are added.
DisplayPort is enabled on the Talos Ride board.
On Hamoa (X Elite) add crypto engine, missing TCSR reference clocks, and
random number generator block. The soc bus address width is corrected to
match the hardware. On the Lenovo Thinkpad T14s HDMI and audio playback
over DisplayPort is introduced. HDMI, Iris (video encode/decode) and
PS8830 retimers are described for the ASUS Vivobook S 15. On the Hamoa
evaluation kit (EVK) PCIe busses, WiFi, backlight, TPM and RG
(red/green) LEDs are described.
Enable QSEECOM, and thereby UEFI variable access, on the Medion SPRCHRGD
14 S1 (commit should have been on drivers branch).
* tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (155 commits)
dt-bindings: mailbox: qcom: Add IPCC support for Kaanapali and Glymur Platforms
dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings for Kaanapali
arm64: dts: qcom: lemans: enable static TPDM
arm64: dts: qcom: kodiak: Add memory region for audiopd
arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes
arm64: dts: qcom: x1e: bus is 40-bits (fix 64GB models)
arm64: dts: qcom: lemans; Add EL2 overlay
arm64: dts: qcom: sm8150: add uart13
arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1
arm64: dts: qcom: sdm845-db845c: drop CS from SPIO0
arm64: dts: qcom: qrb4210-rb2: Fix UART3 wakeup IRQ storm
arm64: dts: qcom: sm6125-ginkgo: Fix missing msm-id subtype
arm64: dts: qcom: qcs8300: Add GPU cooling
arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration
arm64: dts: qcom: hamoa-iot-evk: Enable TPM (ST33) on SPI11
arm64: dts: qcom: talos: Add PMU support
arm64: dts: qcom: talos: switch to interrupt-cells 4 to add PPI partitions
arm64: dts: qcom: ipq9574: Complete USB DWC3 wrapper interrupts
arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts
arm64: dts: qcom: monaco: Add CTCU and ETR nodes
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
arm64: Xilinx DT changes for 6.20
- Cleanup SPI compatible strings
- wwdt: Add optional power-domains property
- ZynqMP: Fix OPP description and setup
- ZynqMP: Remove OP-TEE node
- Drop label from dlg,slg7xl45106
- Remove ina260 IIO description
* tag 'zynqmp-dt-for-6.20' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Remove ina260 IIO description
arm64: dts: xilinx: Drop "label" property on dlg,slg7xl45106
Revert "arm64: zynqmp: Add an OP-TEE node to the device tree"
arm64: dts: xilinx: fix zynqmp opp-table-cpu
dt-bindings: watchdog: xlnx,versal-wwdt: Add optional power-domains property
arm64: dts: xilinx: add soc-specific spi compatibles for zynqmp/versal-net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.20
1. ExynosAutov920:
- Add MFD clock controller node.
2. Google GS101:
- Add True Random Number Generator (TRNG) and OTP nvmem nodes.
- Correct the PMU (Power Management Unit) compatibles by dropping
fallback to syscon. The PMU on Samsung devices serves the role of
syscon, however on GS101 it cannot be used via standard Linux syscon
interface, because register accesses require custom regmap. It was
simply never correctly working with "syscon" compatible fallback.
- Add phandles to System Registers SYSREG blocks in clock controllers,
necessary for enabling automatic clock control later.
* tag 'samsung-dt64-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: gs101: add OTP node
arm64: dts: exynos: gs101: add samsung,sysreg property to CMU nodes
arm64: dts: exynosautov920: add CMU_MFD clock DT nodes
arm64: dts: exynos: gs101: remove syscon compatible from pmu node
dt-bindings: soc: samsung: exynos-pmu: remove syscon for google,gs101-pmu
arm64: dts: exynos: gs101: add TRNG node
dt-bindings: rng: add google,gs101-trng compatible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.20
- Document the RZ/N1 GPIO Interrupt Multiplexer.
* tag 'renesas-dt-bindings-for-v6.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Document RZ/N1 GPIO Interrupt Multiplexer
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The SAI can connect to AUDMIX, but AUDMIX can be bypassed or not on
i.MX952. There are three use cases:
1) SAI -> Codec (No AUDMIX between SAI and Codec)
2) SAI -> Codec (Has AUDMIX, but AUDMIX is bypassed)
3) SAI -> AUDMIX -> Codec (Has AUDMIX and used)
So add 'fsl,sai-amix-mode' property for this feature
fsl,sai-amix-mode = "none": is for case 1)
fsl,sai-amix-mode = "bypass": is for case 2)
fsl,sai-amix-mode = "audmix": is for case 3)
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260123082501.4050296-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a compatible string for i.MX952 platform.
There is a power domain on i.MX952 for the mix system of AUDMIX.
But it is enabled by default, AUDMIX device don't need to enable it,
so make the power-domains to be optional on i.MX952, and be required on
i.MX8QM.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123082501.4050296-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for Linux v6.20/v7.0
This batch of CoreSight hwtracing updates contains :
- Fine grained control of Timestamp generation in ETM4 trace, retaining backward
compatibility
- Feature updates for Qualcomm TPDA driver
- Support Qualcomm Interconnect TNOC
- Miscellaneous fixes to TMC-ETR driver
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (27 commits)
coresight: tmc: Decouple the perf buffer allocation from sysfs mode
coresight: tmc-etr: Fix race condition between sysfs and perf mode
coresight: tmc: Add missing doc including reading and etr_mode of struct tmc_drvdata
coresight-tnoc: Add runtime PM support for Interconnect TNOC
coresight-tnoc: add platform driver to support Interconnect TNOC
dt-bindings: arm: qcom: Add Coresight Interconnect TNOC
coresight: etm3x: Fix cpulocked warning on cpuhp
coresight: tpda: Fix intendation for sysfs interface documentation
coresight: tpda: add sysfs node to flush specific port
coresight: tpda: add logic to configure TPDA_SYNCR register
coresight: tpda: add global_flush_req sysfs node
coresight: tpda: add sysfs nodes for tpda cross-trigger configuration
coresight: docs: Document etm4x timestamp interval option
coresight: Extend width of timestamp format attribute
coresight: Prepare to allow setting the timestamp interval
coresight: Remove misleading definitions
coresight: Interpret ETMv4 config with ATTR_CFG_GET_FLD()
coresight: Interpret perf config with ATTR_CFG_GET_FLD()
coresight: Don't reject unrecognized ETMv3 format attributes
coresight: Interpret ETMv3 config with ATTR_CFG_GET_FLD()
...
|
|
We need the char/misc/iio fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make an entry for cfi extensions in extensions.yaml.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-2-b55691eacf4f@rivosinc.com
[pjw@kernel.org: updated subject]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Fix "alway" -> "always" in lan9303.txt and marvell,mv88e6xxx.yaml.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260123150211.2646235-1-weibu@redadmin.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are some small char/misc/iio and some other minor driver
subsystem fixes for 6.19-rc7. Nothing huge here, just some fixes for
reported issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
comedi: dmm32at: serialize use of paged registers
mei: trace: treat reg parameter as string
uio: pci_sva: correct '-ENODEV' check logic
uacce: ensure safe queue release with state management
uacce: implement mremap in uacce_vm_ops to return -EPERM
uacce: fix isolate sysfs check condition
uacce: fix cdev handling in the cleanup path
slimbus: core: clean up of_slim_get_device()
slimbus: core: fix of_slim_get_device() kernel doc
slimbus: core: amend slim_get_device() kernel doc
slimbus: core: fix device reference leak on report present
slimbus: core: fix runtime PM imbalance on report present
slimbus: core: fix OF node leak on registration failure
intel_th: rename error label
intel_th: fix device leak on output open()
comedi: Fix getting range information for subdevices 16 to 255
mux: mmio: Fix IS_ERR() vs NULL check in probe()
interconnect: debugfs: initialize src_node and dst_node to empty strings
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
...
|
|
The tsc2007 can be used not only as resistive touchscreen controller but
also as a ADC IIO sensor. The second use case requires '#io-channel-cells'
property, hence add it.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260122193549.29858-2-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add description clarifying that for Versal IPI mailboxes, both host and
remote agents must have the "msg" register region defined for successful
message passing. Without both, only notification-based communication
works.
Signed-off-by: Harini T <harini.t@amd.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Update the spacemit,k1-syscon.yaml binding to document K3 SoC reset
support.
K3 reset devices are registered at runtime as auxiliary devices by the
K3 CCU driver. Since K3 reuses the K1 syscon binding, there is no separate
YAML binding file for K3 resets.
Update #reset-cells description to document where reset IDs are defined.
Acked-by: Alex Elder <elder@riscstar.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow
at24 updates for v7.0-rc1
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
|
|
Document the device tree bindings for UFS host controller on Qualcomm
SA8255P platform which integrates firmware-managed resources.
The platform firmware implements the SCMI server and manages resources
such as the PHY, clocks, regulators and resets via the SCMI power
protocol. As a result, the OS-visible DT only describes the controller’s
MMIO, interrupt, IOMMU and power-domain interfaces.
The generic "qcom,ufshc" and "jedec,ufs-2.0" compatible strings are
removed from the binding, since this firmware managed design won't be
compatible with the drivers doing full resource management.
Co-developed-by: Anjana Hari <anjana.hari@oss.qualcomm.com>
Signed-off-by: Anjana Hari <anjana.hari@oss.qualcomm.com>
Signed-off-by: Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260113080046.284089-3-ram.dwivedi@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add compatible string for the SPMI block on MT8189 SoC, which is
compatible with the one used on MT8195.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260123182039.224314-11-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
SPMI PMIC Arbiter version 8 builds upon version 7 with support for
up to four SPMI buses. To achieve this, the register map was
slightly rearranged. Add a new binding file and compatible string
for version 8 using the name 'glymur' as the Qualcomm Technologies,
Inc. Glymur SoC is the first one to use PMIC arbiter version 8. This
specifies the new register ranges needed only for version 8.
Also document SPMI PMIC Arbiter for Qualcomm Kaanapali SoC, by adding
fallback to Glymur compatible string, as it too has version 8
functionality.
Signed-off-by: David Collins <david.collins@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260123182039.224314-9-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Split out the common SPMI PMIC arbiter properties for QCOM devices into a
separate file so that it can be included as a reference for devices
using them. This will be needed for the upcoming PMIC v8 arbiter
support patch, as the v8 arbiter also uses these common properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260123182039.224314-8-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the MT8196 SPMI 2.0 Controller with a new schema.
This is a MIPI SPMI 2.0 compliant IP, composed of a main arbiter
and two SPMI master controllers with Request Capable Slave (RCS)
support.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260123182039.224314-2-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SCIF binding documentation for Renesas RZ/G3L SoC. SCIF block on the
RZ/G3L is identical to one found on the RZ/G3S SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://patch.msgid.link/20260120125232.349708-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the TI TAS2552 codec binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260121235757.370920-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the devicetree binding for PCIe M.2 Mechanical Key M connector defined
in the PCI Express M.2 Specification, r4.0, sec 5.3. This connector
provides interfaces like PCIe and SATA to attach the Solid State Drives
(SSDs) to the host machine along with additional interfaces like USB, and
SMBus for debugging and supplementary features.
The connector provides a primary power supply of 3.3v, along with an
optional 1.8v VIO supply for the Adapter I/O buffer circuitry operating at
1.8v sideband signaling.
The connector also supplies optional signals in the form of GPIOs for fine
grained power management.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260122-pci-m2-v6-1-575da9f97239@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Devicetree bindings for MAX22007 4-channel 12-bit DAC that drives a
voltage or current output on each channel
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Janani Sunil <janani.sunil@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
zynqmp-aes-gcm updated to self discover, corresponding dt binding
can be mark deprecated.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc7).
Conflicts:
drivers/net/ethernet/huawei/hinic3/hinic3_irq.c
b35a6fd37a00 ("hinic3: Add adaptive IRQ coalescing with DIM")
fb2bb2a1ebf7 ("hinic3: Fix netif_queue_set_napi queue_index input parameter error")
https://lore.kernel.org/fc0a7fdf08789a52653e8ad05281a0a849e79206.1768915707.git.zhuyikai1@h-partners.com
drivers/net/wireless/ath/ath12k/mac.c
drivers/net/wireless/ath/ath12k/wifi7/hw.c
31707572108d ("wifi: ath12k: Fix wrong P2P device link id issue")
c26f294fef2a ("wifi: ath12k: Move ieee80211_ops callback to the arch specific module")
https://lore.kernel.org/20260114123751.6a208818@canb.auug.org.au
Adjacent changes:
drivers/net/wireless/ath/ath12k/mac.c
8b8d6ee53dfd ("wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel")
914c890d3b90 ("wifi: ath12k: Add framework for hardware specific ieee80211_ops registration")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.20:
Core Changes:
- buddy: Fix free_trees memory leak, prevent a BUG_ON
- dma-buf: Start to introduce cgroup memory accounting in heaps, Remove
sysfs stats, add new tracepoints
- hdmi: Limit infoframes exposure to userspace based on driver
capabilities
- property: Account for property blobs in memcg
Driver Changes:
- atmel-hlcdc: Switch to drmm resources, Support nomodeset parameter,
various patches to use newish helpers and fix memory safety bugs
- hisilicon: Fix various DisplayPort related bugs
- imagination: Introduce hardware version checks
- renesas: Fix kernel panic on reboot
- rockchip: Fix RK3576 HPD interrupt handling, Improve RK3588 HPD
interrupt handling
- v3d: Convert to drm logging helpers
- bridge:
- Continuation of the refcounting effort
- new bridge: Algoltek AG6311
- panel:
- new panel: Anbernic RG-DS
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260122-antique-sexy-junglefowl-1bc5a8@houat
|