| Age | Commit message (Collapse) | Author |
|
Add a device tree binding for the QIXIS FPGA based GPIO controller.
Depending on the board, the QIXIS FPGA exposes registers which act as a
GPIO controller, each with 8 GPIO lines of fixed direction.
Since each QIXIS FPGA layout has its particularities, add a separate
compatible string for each board/GPIO register combination supported.
Since these GPIO controllers are trivial, make use of the newly added
trivial-gpio.yaml file instead of creating an entirely new one.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Convert amd,xgbe-seattle-v1a binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251013213049.686797-2-robh@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce AN7583 NPU support to Airoha EN7581 NPU device-tree bindings.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251013-airoha-npu-7583-v3-1-00f748b5a0c7@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CMD-DB
Currently, CMD-DB names for RPMH regulators follow this format:
`^(smps|ldo|bob|vs)[a-n][1-9][0-9]?$`
Here, the `[a-n]` value is read from the `pmic-id` DT property,
which is unique to each PMIC present on the board.
Note that in this older CMD-DB name format the SPMI bus on which
a particular PMIC regulator exists was not apparent from its
CMD-DB name.
New targets like Glymur, where we have multiple SPMI buses,
overcome this limitation by following a new CMD-DB name format:
`^(L|S|B)[1-9][0-9]?[A-N]_E[0-3]$`
Here `[A-N]_E[0-3]` part will now be read from the `pmic-id` DT
prop and it includes the SPMI bus id `[0-3]` as well.
However, the PMIC ID part `[A-N]` of the CMD-DB name is now
unique only to the SPMI bus that the PMIC regulator is present
on. which means `L1B_E0` and `L1B_E1` are both possible CMD-DB
names for two different regulator LDOs present on two different
SPMI buses (bus id 0 and 1) on the same board.
Note that since the new `pmic-id` DT property is a combo of
PMIC ID and SPMI bus ID, so its still unique to each PMIC
present on the board.
Update the `pmic-id` property pattern information to reflect this
change in the driver handling to support this new CMD-DB naming
format while maintaining backward compatiblilty with old CMD-DB
naming format which is still supported for older/existing
targets.
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-2-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add rpmh-regulator driver compatibles strings for below PMICs:
- PMH0101
- PMH0104
- PMH0110
- PMCX0102
Also add the supply name properties for the regulators
present on these PMICs.
Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-1-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible string fsl,imx-audio-tlv320 to fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dtb: /sound: failed to match any schema with compatible: ['fsl,imx-audio-tlv320']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251010160321.2130093-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add dt-bindings for MPS mp9945 controller.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Link: https://lore.kernel.org/r/20251009205458.396368-1-chou.cosmo@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert APM X-Gene slimpro-hwmon binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251013213127.692373-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add interrupt property to document the SMBALERT pin functionality for
fault condition signal.
Suggested-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251013-upstream-max17616-v1-1-0e15002479c3@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Since fan properties can include reg, the fan controller should be
able to specify address-cells and size-cells properties and use
an addressed fan child node.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251001144441.310950-6-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The binding for the max31785 is the same as the max31790, so just add
some compatible strings for the max31785 chip.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251001144441.310950-5-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add Murata ncp18wm474 [1] NTC to the ntc-thermistor binding.
[1] https://www.murata.com/en-eu/api/pdfdownloadapi?cate=&partno=NCP18WM474E03RB
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251001-ntc-thermistor-ncp18wm474-v1-2-2c64b9b509ff@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add optional clock for OSC_IN and fix the below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dtb: switch@0 (nxp,sja1105q): Unevaluated properties are not allowed ('clocks' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251010183418.2179063-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from "Sheetal ." <sheetal@nvidia.com>:
Add device tree support for tegra264 audio subsystem including:
- Binding update for
- 64-channel ADMA controller
- 32 RX/TX ADMAIF channels
- tegra264-agic binding for arm,gic
- Add device tree nodes for
- APE subsystem (ACONNECT, AGIC, ADMA, AHUB and children (ADMAIF, I2S,
DMIC, DSPK, MVC, SFC, ASRC, AMX, ADX, OPE and Mixer) nodes
- HDA controller
- sound
Note:
The change is dependent on https://patchwork.ozlabs.org/project/linux-tegra/patch/20250818135241.3407180-1-thierry.reding@gmail.com/
...
Changes in V2:
- Update the allOf condition in Patch 2/4.
sheetal (4):
dt-bindings: dma: Update ADMA bindings for tegra264
dt-bindings: sound: Update ADMAIF bindings for tegra264
dt-bindings: interrupt-controller: arm,gic: Add tegra264-agic
arm64: tegra: Add tegra264 audio support
.../bindings/dma/nvidia,tegra210-adma.yaml | 15 +-
.../interrupt-controller/arm,gic.yaml | 1 +
.../sound/nvidia,tegra210-admaif.yaml | 106 +-
.../arm64/boot/dts/nvidia/tegra264-p3971.dtsi | 106 +
arch/arm64/boot/dts/nvidia/tegra264.dtsi | 3190 +++++++++++++++++
5 files changed, 3377 insertions(+), 41 deletions(-)
--
2.34.1
|
|
Convert the aspeed,ast2400-ibt-bmc binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20251014152948.3782738-1-robh@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
Convert the nuvoton,npcm750-kcs-bmc binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20251014152935.3782463-1-robh@kernel.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
Convert APM X-Gene slimpro-mbox binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The NanoPi R76S (as "R76S") is an open-sourced mini IoT gateway
device with two 2.5G, designed and developed by FriendlyElec.
Add devicetree binding documentation for the FriendlyElec NanoPi R76S
board.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Remove files documentation from stih407-c8sectpfe driver.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: slight change of the Subject, mention doc changes as well]
|
|
Shreeya no longer works at Collabora, set Dmitry as maintainer of
the Synopsys HDMI RX binding.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Document the MIPI DSI controller for Rockchip RK3368.
Signed-off-by: WeiHao Li <cn.liweihao@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250905025632.222422-9-cn.liweihao@gmail.com
|
|
Convert APM X-Gene slimpro-i2c binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Pull in outstanding SCSI fixes for 6.18.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Ensure my CI has a sensible baseline.
|
|
Add a compatible for the LPASS LPI pin controller on QCM2290. It seems
to be compatible with sm6115 LPASS pinctrl.
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Srinivas Kandagatla <srini@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Update the ADMAIF bindings as tegra264 supports 64 channels, which includes
32 RX and 32 TX channels.
Signed-off-by: sheetal <sheetal@nvidia.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250929105930.1767294-3-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
IPQ5332 contains the QPIC-SPI-NAND flash controller which is the same as
the one found in IPQ9574. So let's document the IPQ5332 compatible and
use IPQ9574 as the fallback.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20251008090413.458791-3-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
IPQ5424 contains the QPIC-SPI-NAND flash controller which is the same as
the one found in IPQ9574. So let's document the IPQ5424 compatible and
use IPQ9574 as the fallback.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20251008090413.458791-2-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the existing text-based DT bindings for Dialog Semiconductor DA9211
Voltage Regulators family to a DT schema. Examples are simplified, as these
are all equal.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251001183648.83379-1-ariel.dalessandro@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
TAS5802, TAS5815, and TAS5828 are in same family with TAS5825, TAS5827,
TAS5802 and TAS5815 share same address setting, and TAS5828
share same address setting with TAS5827.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251010085349.52951-2-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Top Level Mode Multiplexer (TLMM) in the Kaanapali SoC provide GPIO and
pinctrl functionality for UFS, SDC and 217 GPIO pins.
Add a DeviceTree binding to describe the Kaanapali TLMM block.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Convert the marvell,armada3710-(sb|nb)-pinctrl binding to DT schema
format. The binding includes the "marvell,armada-3700-xtal-clock"
subnode which is simple enough to include here.
Mark interrupt-controller/#interrupt-cells as required as the users have
them and the h/w is either capable of interrupts or not.
As this syscon has 2 register ranges, syscon-common.yaml needs to be
updated to drop the restriction of 1 register entry.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Convert the Marvell/Synaptics Berlin pinctrl binding to DT schema
format. The "reg" property was not documented for the newer SoCs.
Otherwise, it's a straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Update the Qualcomm Technologies, Inc. PMIC GPIO binding documentation
to include compatible strings for PMK8850, PMH0101, PMH0104, PMH0110
and PMCX0102 PMICs.
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Rename the GPIO controller node from "msmgpio" to "tlmm" to match the
convention used by other Qualcomm SoCs.
Suggested-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add the "ti,am62l-padconf" compatible to allow for some changes in the
driver in the future when needed.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Update ti,tas2781.yaml for adding TAS5802/TAS5815/TAS5828.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251002072925.26242-2-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add bindings for QCS615 sound card, which looks fully
compatible with existing SM8250.
Signed-off-by: Le Qi <le.qi@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251009090619.1097388-2-le.qi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Add device-tree bindings for the pin controller and the EINT controller
found in the MediaTek MT6878 SoC.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add an entry for Alcatel Pop C7 (OT-7041D) smartphone board, named
yarisxl, based on MT6582 SoC.
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add a compatible string for the MediaTek mt8395-evk-ufs board.
This board is the origin Genio 1200 EVK already mounted two main storages,
one is eMMC, and the other is UFS. The system automatically prioritizes
between eMMC and UFS via BROM detection, so user could not use both storage
types simultaneously. As a result, mt8395-evk-ufs must be treated as a
separate board.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the missing multiport controller binding to target list.
Fix minItems for interrupt-names to avoid the following error on High
Speed controller:
usb@a200000: interrupt-names: ['dwc_usb3', 'pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
Fixes: 6e762f7b8edc ("dt-bindings: usb: Introduce qcom,snps-dwc3")
Cc: stable@vger.kernel.org
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ports definition currently defined in the usb-switch.yaml
fits standards devices which are either recipient of altmode
muxing and orientation switching events or an element of the
USB Super Speed data lanes.
This doesn't necessarely fit combo PHYs like the Qualcomm
USB3/DP Combo which has a different ports representation.
Move the ports definition to a separate usb-switch-ports.yaml
and reference it next to the usb-switch.yaml, except for
the Qualcomm USB3/DP Combo PHY bindings.
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/175462129176.394940.16810637795278334342.robh@kernel.org/
Fixes: 3bad7fe22796 ("dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Set the interrupt type to rising edge within the example block in order
to match the new driver.
The entry that got replaced was not in use by the original driver.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Assert CPOL for a high-idle clock signal and CPHA for sampling on the
trailing (rising) edge.
Quoting from the datasheet:
"During the transitions on CSB, SCK must be high. SDI and SDO are driven
at the falling edge of SCK and should be captured at the rising edge of
SCK."
The sensor does not function with the default SPI clock mode.
Fixes: 7dbd479425d2 ("dt-bindings:iio:accel:bosch,bma220 device tree binding documentation")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Cleanup typo present in the title.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Only i.MX8MP need dma-range property to let USB controller work properly.
Remove dma-range from required list and add limitation for imx8mp.
Fixes: d2a704e29711 ("dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a compatible for the exynos8890-dwusb3 node. It features the same
clocks and regulators as exynos7, so reuse its compatible.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250914135652.2626066-1-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the SATA AHCI controller on the EIC7700 SoC platform,
including descriptions of its hardware configurations.
Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|