| Age | Commit message (Collapse) | Author |
|
There are some products which support GDSP remoteprocs. GDSP is General
Purpose DSP where tasks can be offloaded. There are 2 GDSPs named gdsp0
and gdsp1. Add "gdsp0" and "gdsp1" as the new supported labels for GDSP
fastrpc domains.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131302.303199-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Qcom Slimbus controller driver is totally unused and dead code, there is
no point in keeping this driver in the kernel without users.
This patch removes the driver along with device tree bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131202.303026-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document compatible for RIPE Atlas Probe v5.
Signed-off-by: Tomáš Macholda <tomas.macholda@nic.cz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Introduce a new optional device tree property max-sd-hs-hz to
limit the maximum frequency (in Hz) used for SD cards operating in
High-Speed (HS) mode due to any board electrical limitations.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the MSM SDHCI compatible name to support both eMMC and SD card for
Lemans, which uses 'sa8775p' as the fallback SoC. Ensure the new
compatible string matches existing Lemans-compatible formats without
introducing a new naming convention.
The SDHCI controller on Lemans is based on MSM SDHCI v5 IP. Hence,
document the compatible with "qcom,sdhci-msm-v5" as the fallback.
Signed-off-by: Monish Chunara <quic_mchunara@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some older boards only require a default pinctrl. Add a minItems
property so these don't cause dt-validate warnings.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509030625.PBgLIAwG-lkp@intel.com/
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.18
1. Add pin controller drivers for new Axis ARTPEC-8 SoC. The SoC shares
all main blocks, including the pin controller, with Samsung SoC, so
same drivers and bindings are used.
2. Drop remaining support for Samsung S3C2410 SoC pin controllers. The
actual SoC support was removed in January 2023, so this is just
remaining cleanup.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add interconnect dt-bindings and driver support for
Qualcomm's next gen compute SoC - Glymur.
* icc-glymur
dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in Glymur SoC
interconnect: qcom: icc-rpmh: increase MAX_PORTS to support four QoS ports
interconnect: qcom: add glymur interconnect provider driver
Link: https://lore.kernel.org/r/20250814-glymur-icc-v2-0-596cca6b6015@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add Operation State Manager (OSM) L3 interconnect provider binding for
QCS615 SoC. As the OSM hardware in QCS615 and SM8150 are same,
added a family-level compatible for SM8150 SoC.
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250819-talos-l3-icc-v3-1-04529e85dac7@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add devicetree bindings for Variscite VAR-SOM-AM62P System on Module
and its carrier boards.
Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250909213749.28098-2-stefano.radaelli21@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The AM6254atl SiP belongs to the K3 Multicore SoC architecture platform,
providing AM625 SoC with 512MiB of integrated DDR in the package.
For further information about the package check:
https://www.ti.com/lit/ds/symlink/am625sip.pdf
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250814134531.2743874-3-anshuld@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Convert the APM XGene MDIO bus binding to DT schema format. It's a
straight-forward conversion.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250908231016.2070305-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the APM XGene Ethernet binding to DT schema format.
Add the missing apm,xgene2-sgenet and apm,xgene2-xgenet compatibles.
Drop "reg-names" as required. Add support for up to 16 interrupts.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250908231016.2070305-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Xianwei Zhao <xianwei.zhao@amlogic.com>:
This Flash Controller is derived by adding an SPI path to the original
raw NAND controller. This controller supports two modes: raw mode and
SPI mode. The raw mode has already been implemented in the community
(drivers/mtd/nand/raw/meson_nand.c).
This submission supports the SPI mode.
Add the drivers and bindings corresponding to the SPI Flash Controller.
|
|
Document the compatible values for the Renesas R-Car X5H (R8A78000) SoC,
as used on the Renesas Ironhide board.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/87ms73vzen.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add a compatible for ASUS Eee Pad Transformer TF101G and ASUS Eee Pad
Slider SL101.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add a compatible for the Xiaomi Mi Pad (A0101) tablet.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The avdd-dsi-csi-supply is CSI power supply, it has nothing to do with
VI, like same supply is used with DSI and has nothing to do with DC.
Move it to correct place.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra264 has 17 generic I2C controllers, two of which are in always-on
partition of the SoC. In addition to the features supported by Tegra194
it also supports a SW mutex register to allow sharing the same I2C
instance across multiple firmware.
Document compatible string "nvidia,tegra264-i2c" for Tegra264 I2C.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Document the Texas instruments BQ25703A series of charger managers/
buck/boost regulators.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250904160530.66178-2-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The gt24c256c is another 24c256 compatible EEPROM, and does not
follow the generic name matching, so add a separate compatible for it.
This ensures accurate device-tree representation and enables proper
kernel support for systems using this part.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-lemans-evk-bu-v4-5-5c319c696a7d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The SPDIF receiver/transmitter can be connected to a DAI device via OF
graph port. It is already in use and supported.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250910233615.775397-2-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Texas Instruments PCM1754 is a simple stereo DAC without any digital
management interface but soft mute, PCM input format and 44.1 kHz
digital de-emphasis can be configured via strapping pins. Only soft mute
and PCM input format selection is currently exposed via optional GPIOs
in the driver.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250910-v6-12-topic-pcm1754-v2-1-0917dbe73c65@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next
Krzysztof writes:
1-Wire bus drivers for v6.18
1. Correct missing interrupts in IMX 1-Wire Devicetree bindings.
2. Drop old, dead code from Matrox driver.
* tag 'w1-drv-6.18' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: matrox: Remove some deadcode in matrox_w1_remove()
dt-bindings: w1: imx: Add an entry for the interrupts property
|
|
Add CSIDPHY GRF syscon compatible for the Rockchip RK3588.
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-1-a4f340a7f0cf@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
TQMa91xx series is using NXP i.MX91 CPU on an LGA or socketable type board.
MBa91xxCA is a starterkit base board for TQMa91xx on an adapter board.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Allow clocks and clock-names to match existed dts file.
'hsrun_divcore' should be 'hsrun-divcore'. But use '_' to keep old dts back
compatible.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx7ulp-com.dtb: clock-controller@40410000 (fsl,imx7ulp-smc1): '#clock-cells', 'clock-names', 'clocks' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-pm.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add bindings for SolidRun i.MX8M Plus System on Module based boards:
- CuBox-M is a complete produc with enclosure including the SoM
- HummingBoard Mate/Pro/Pulse/Ripple are evaluation boards with common
design but different available interfaces.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
imx53.dtsi has the following compatible entry:
compatible = "fsl,imx53-iomuxc-gpr", "syscon";
Document the "fsl,imx53-iomuxc-gpr" entry to fix the following
dt-schema warning:
failed to match any schema with compatible: ['fsl,imx53-iomuxc-gpr', 'syscon']
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for TechNexion EDM-G-IMX8M-PLUS SOM and WB-EDM-G carrier board.
Signed-off-by: Ray Chang <ray.chang@technexion.com>
Signed-off-by: Richard Hu <richard.hu@technexion.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Make a formal change to reflect the actual NXP LPC32xx maintainership
for the last years.
Cc: Roland Stigge <stigge@antcom.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
|
|
The current-sense-amplifier is an IIO provider thus can be referenced by
IIO consumers (via "io-channels" property in consumer device node). Such
provider is required to describe number of cells used in phandle lookup
with "io-channel-cells" property.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250905065503.3022107-1-primoz.fiser@norik.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document the bindings for Infineon TLV493D Low-Power 3D Magnetic Sensor
controlled by I2C interface. Main applications includes joysticks, control
elements (white goods, multifunction knops), or electric meters (anti-
tampering).
Drop duplicate entry for infineon,tlv493d from trivial-devices.yaml as
its documented in this separate dt-binding file now.
Datasheet: https://www.infineon.com/assets/row/public/documents/24/49/infineon-tlv493d-a1b6-datasheet-en.pdf
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dixit Parmar <dixitparmar19@gmail.com>
Link: https://patch.msgid.link/20250906-tlv493d-sensor-v6_16-rc5-v6-1-b1a62d968353@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
With last user of touchscreen via ADC (S3C24xx SoC) gone, drop the
unused has-touchscreen property and optional touchscreen interrupt for
samsung,s3c6410-adc. The samsung,s5pv210-adc is the only platform
having two interrupts, so add a constrain for that.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250830-s3c-cleanup-adc-v2-5-4f8299343d32@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Samsung S3C24xx family of SoCs was removed the Linux kernel in the
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of remaining S3C24xx compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250830-s3c-cleanup-adc-v2-4-4f8299343d32@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The Rockchip RK3588 variant of the CSI-2 DPHY features two reset lines.
Add the variant and allow for the additional reset.
While at it, fix the description of the first reset in order to avoid
confusion.
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-3-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There are variants of the Rockchip Innosilicon CSI DPHY (e.g., the RK3568
variant) that are powered on by default as they are part of the ALIVE power
domain.
Remove 'power-domains' from the required properties in order to avoid false
positives.
Fixes: 22c8e0a69b7f ("dt-bindings: phy: add compatible for rk356x to rockchip-inno-csi-dphy")
Cc: stable@kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-2-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The USB phy of Sophgo CV18XX series SoC needs to sense a pin called
"VBUS_DET" to get the right operation mode. If this pin is not
connected, it only supports setting the mode manually.
Add USB phy bindings for Sophgo CV18XX/SG200X series SoC.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250708063038.497473-2-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add bindings for pin controller in SDM660 Low Power Audio SubSystem
(LPASS).
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Nickolay Goppen <setotau@mainlining.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The Flash Controller is derived by adding an SPI path to the original
raw NAND controller. This controller supports two modes: raw mode and
SPI mode. The raw mode has already been implemented in the community,
and the SPI mode is described here.
Add bindings for Amlogic A113L2 SPI Flash Controller.
Signed-off-by: Feng Chen <feng.chen@amlogic.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20250910-spifc-v6-1-1574aa9baebd@amlogic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add device tree bindings support for the Grinn GenioSBC-510, a
single-board computer based on the MediaTek Genio 510 SoC.
More details about the hardware:
- https://grinn-global.com/products/grinn-geniosom-510
- https://grinn-global.com/products/grinn-genioboard-edge-ai-sbc
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Mateusz Koza <mateusz.koza@grinn-global.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250908130620.2309399-5-mateusz.koza@grinn-global.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add device tree bindings support for the Grinn GenioSBC-700, a
single-board computer based on the MediaTek Genio 700 SoC.
More details about the hardware:
- https://grinn-global.com/products/grinn-geniosom-700
- https://grinn-global.com/products/grinn-genioboard-edge-ai-sbc
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Mateusz Koza <mateusz.koza@grinn-global.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250908130620.2309399-3-mateusz.koza@grinn-global.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
These are needed for dynamic frequency scaling of the EMC controller.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Loongson-2K1000 NAND controller
Add new compatible for the Loongson-2K NAND controller used for
Loongson-2K1000 SoC.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Loongson-2K0500 NAND controller
Add new compatible for the Loongson-2K NAND controller used for
Loongson-2K0500 SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
BBM protocol supports a single power button, supported by driver
imx-sm-bbm-key.c. By default this is KEY_POWER, but can also be overwritten
using linux,code. Add a reference to this schema and add linux,code as a
supported property.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In some cases it's reasonable to describe DP lanes and AUX signal lines
separately in the DT. One of the typical reasons is if the source of DP
signals can support either USB-C or DP connections. In such a case the
transmitter of DP signals have separate ports: one for SS lanes and
another one for SBU / AUX signals.
Instead of leaving AUX signals from the controller unconnected, add an
option to the DT schema to AUX signal lines separately from the main
link lanes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250907-dp-conenctor-sbu-v1-1-de79c0fcd64d@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Document established Devicetree bindings maintainers review practice:
Properties having differences per each device in the binding, e.g.
different constraints for lists or different allowed values, should
still be defined in top-level 'properties' section and only customized
in 'if:then:'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250904142400.179955-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The Discovery Kit (MPFS-DISCO-KIT) is a development board featuring
a Microchip PolarFire SoC MPFS095T.
Link: https://www.microchip.com/en-us/development-tool/mpfs-disco-kit
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|