| Age | Commit message (Collapse) | Author |
|---|
|
rk3562 use the same Naneng Combo Phy driver as rk3568.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250227110836.2343158-1-kever.yang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add dt-binding schema for the MIPI C-/D-PHY found on
Rockchip RK3588 SoCs.
Tested-by: Daniel Semkowicz <dse@thaumatec.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Link: https://lore.kernel.org/r/20250313134035.278133-2-heiko@sntech.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- several new device IDs added to xpad game controller driver
- support for imagis IST3038H variant of chip added to imagis touch
controller driver
- a fix for GPIO allocation for ads7846 touch controller driver
- a fix for iqs7222 driver to properly support status register
- a fix for goodix-berlin touch controller driver to use the right name
for the regulator
- more i8042 quirks to better handle several old Clevo devices.
* tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Remove myself from the goodix touchscreen maintainers
Input: iqs7222 - preserve system status register
Input: i8042 - swap old quirk combination with new quirk for more devices
Input: i8042 - swap old quirk combination with new quirk for several devices
Input: i8042 - add required quirks for missing old boardnames
Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ
Input: xpad - rename QH controller to Legion Go S
Input: xpad - add support for TECNO Pocket Go
Input: xpad - add support for ZOTAC Gaming Zone
Input: goodix-berlin - fix vddio regulator references
Input: goodix-berlin - fix comment referencing wrong regulator
Input: imagis - add support for imagis IST3038H
dt-bindings: input/touchscreen: imagis: add compatible for ist3038h
Input: xpad - add multiple supported devices
Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers
Input: ads7846 - fix gpiod allocation
Input: wdt87xx_i2c - fix compiler warning
|
|
Device nodes are enabled by default, so no need for 'status = "okay"' in
the DTS example.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings changes for 6.15:
- Add compatibles for Skov i.MX8MP variants, VAR-SOM-MX6UL SoM and
Concerto, i.MX95 15x15 EVK, btt3 i.MX28
- Drop Toradex SOMs compatibles
* tag 'imx-bindings-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add VAR-SOM-MX6UL SoM and Concerto board
dt-bindings: arm: fsl: drop usage of Toradex SOMs compatible alone
dt-bindings: arm: fsl: add i.MX95 15x15 EVK board
dt-bindings: arm: fsl: add more compatibles for Skov i.MX8MP variants
dt-bindings: arm: Document the btt3 i.MX28 based board
Link: https://lore.kernel.org/r/20250312074005.663165-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V SpacemiT DT changes for 6.15
- Add Milk-V Jupiter board
- MAINTAINERS info
* tag 'spacemit-dt-for-6.15-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: Add Milk-V Jupiter board device tree
dt-bindings: riscv: spacemit: Add Milk-V Jupiter board compatible
MAINTAINERS: spacemit: update various info
Link: https://lore.kernel.org/r/20250312003023-GYA76989@gentoo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.15
1. Google GS101:
- Disable GSA core pinctrl because its registers are not available for
normal world.
- Add APM (Active Power Management) mailbox and the ACPM firmware nodes.
- Add new boards: Google Pixel 6 Pro (Raven).
- Enable framebuffer and reboot-mode.
2. Exynos990:
- Add PERIS clock controller, MCT timer
3. Exynos8895:
- Define all remaining serial engine (USI) and syscon nodes, add MMC.
- Enable microSD and touchsreen on Samsung Galaxy S8 (dreamlte).
4. ExynosAutov920: Add UFS and CPU cache information.
5. Various cleanups.
This includes two topic branches with DT bindings, which might be shared
with other trees depending on needs:
1. for-v6.15/samsung-clk-dt-bindings with Exynos990 clock controller
header constants.
2. for-v6.15/samsung-soc-dt-bindings with Exynos USI serial engines
header constants rework.
* tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (25 commits)
arm64: dts: tesla: Change labels to lower-case
arm64: dts: exynos: gs101: Change labels to lower-case
arm64: dts: exynosautov920: add ufs phy for ExynosAutov920 SoC
arm64: dts: exynosautov920: add CPU cache information
arm64: dts: exynos: gs101: add ACPM protocol node
arm64: dts: exynos: gs101: add AP to APM mailbox node
arm64: dts: exynos: gs101: add SRAM node
arm64: dts: exynos: gs101: add reboot-mode support (SYSIP_DAT0)
arm64: dts: exynos: gs101: align poweroff writes with downstream
arm64: dts: exynos: gs101: drop explicit regmap from reboot nodes
arm64: dts: exynos8895: Rename PMU nodes to fixup sorting
arm64: dts: exynos8895-dreamlte: enable support for the touchscreen
arm64: dts: exynos8895-dreamlte: enable support for microSD storage
arm64: dts: exynos8895: add a node for mmc
arm64: dts: exynos8895: define all usi nodes
arm64: dts: exynos8895: add syscon nodes for peric0/1 and fsys0/1
arm64: dts: exynos990: Rename and sort PMU nodes
arm64: dts: exynos990: Add CMU_PERIS and MCT nodes
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
dt-bindings: clock: exynos990: Add CMU_PERIS block
...
Link: https://lore.kernel.org/r/20250309185601.10616-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: MNT-Reform2 laptop (rk3588), OrangePi5-Ultra (rk3588),
Radxa Rock 4D (rk3576), Firefly ROC-RK3576-PC, Photonicat (rk3568)
New overlays: Video-adapters for Theobroma boards and one adapter used
in hw test scenarios.
Interesting bigger changes contain clock support for rk3528; support for
the hdmi1 controller as well as hdmi-audio support on both controllers on
rk3588; the hdmi-receiver of the rk3588 landed, and rk3576 got basic
graphics support and can now do hdmi output.
Another big block is that we're now doing overlays way better and are
including build-testing for applied overlays to the base dtb - similar
to how other arches already do this.
Of cours a big list of more controllers for rk3576 (nvmem, sfc), rk3588
(rng, spdif, regulator for gpu power-domain) and rk3528 (saradc, pinctrl)
And a huge number of board-level improvements and additions.
* tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (89 commits)
arm64: dts: rockchip: Add SPI NOR device on the ROCK 4D
arm64: dts: rockchip: Add SFC nodes for rk3576
arm64: dts: rockchip: Add maskrom button to Radxa E20C
arm64: dts: rockchip: Add SARADC node for RK3528
arm64: dts: rockchip: Add user button to Radxa E20C
arm64: dts: rockchip: Add leds node to Radxa E20C
arm64: dts: rockchip: Add HDMI support for rock-4d
arm64: dts: rockchip: enable SCMI clk for RK3528 SoC
arm64: dts: rockchip: Enable HDMI receiver on rock-5b
arm64: dts: rockchip: Add device tree support for HDMI RX Controller
arm64: dts: rockchip: Add rk3528 QoS register node
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
arm64: dts: rockchip: add MNT Reform 2 laptop
dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE)
dt-bindings: soc: rockchip: Add RK3528 VPU GRF syscon
dt-bindings: soc: rockchip: Add RK3528 VO GRF syscon
arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10
arm64: dts: rockchip: Enable hdmi display on sige5
arm64: dts: rockchip: Add hdmi for rk3576
arm64: dts: rockchip: Add vop for rk3576
...
Link: https://lore.kernel.org/r/13791512.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.15-rc1
This adds compatible strings for Tegra114 HDA and Tegra124 MIPI.
* tag 'tegra-for-6.15-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Document Tegra114 HDA support
dt-bindings: display: tegra: Document Tegra124 MIPI
Link: https://lore.kernel.org/r/20250307162332.3451523-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Due to the difference in how the panel backlight is being handled
between the OLED variant and LCD one, it is required to have two
separate DTBs.
So document the compatible string for both the OLED and LCD variants.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250314140325.4143779-2-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Introduce pbus-csr document bindings in syscon.yaml for EN7581 SoC.
The airoha pbus-csr block provides a configuration interface for the PBUS
controller used to detect if a given address is accessible on PCIe
controller.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250312-en7581-pbus_csr-binding-v3-1-7bd9f00a25a4@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add bindings for the Lumissil/Ingenic X1600 SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/a9865c817d5aa9046dcbb251d834c1dbcc4e9219.1740823241.git.hns@goldelico.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Document rk3528 compatible for QoS registers.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250306123809.273655-2-amadeus@jmu.edu.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add flexcom binding documentation for sama7d65.
Consolidated entries into one enum to match proper coding style.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/9656d46ee0255b9aba404d77d2d204376a9cb248.1736522006.git.Ryan.Wanner@microchip.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Document the qcom,msm8937-tcsr compatible.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250211-msm8937-v1-5-7d27ed67f708@mainlining.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
S2MPU05 is a PMIC present in Samsung's Exynos7870 devices. It houses
voltage regulators (21 LDOs and 5 BUCKs), and an RTC module. Add the
compatible string "samsung,s2mpu05-pmic" to the PMIC documentation.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250204-exynos7870-pmic-regulators-v1-2-05adad38102c@disroot.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
- TPS65214 is a Power Management IC with 3 Buck regulators and 2 LDOs.
- TPS65214 has 2 LDOS and 1 GPO, whereas TPS65219 has 4 LDOs and 2 GPOs.
- TPS65214's LDO1 maps to TPS65219's LDO3.
- A key difference between TPS65215 & TPS65214 are the LDO current and
voltage output ranges and the configurable options available.
- The remaining features for both devices are the same.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250206173725.386720-3-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
TPS65215 is a Power Management IC with 3 Buck regulators and 2 LDOs.
TPS65215 has 2 LDOS and 1 GPO, whereas TPS65219 has 4 LDOs and 2 GPOs. The
remaining features for both devices are the same.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250206173725.386720-2-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Convert mcu-mpc8349emitx.txt to YAML and list the compatible strings
currently in use.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250126-ppcyaml-v1-4-50649f51c3dd@posteo.net
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add a new stm32mp25 compatible to stm32-timer dt-bindings in order to
support the STM32MP25 SoC. Some features has been added or updated in
the stm32-timer timer such as:
- hardware configuration and identification registers to read the timer
version and capabilities (counter width, number of channels...)
- dithering mode (can be used to extend PWM resolution)
- input triggers list
- new counter modes
- various bit-field updates
- power-domains property
Timer trigger identifier can be up to 19 (from timer 20)
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-2-fabrice.gasnier@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'ib-mfd-regulator-6.15' into ibs-for-mfd-merged
|
|
Add compatible string "fsl,imx94-flexcan" for the i.MX94 chip, which
is backward compatible with i.MX95. Set it to fall back to
"fsl,imx95-flexcan".
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250307190816.2971810-1-Frank.Li@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
R-Car V4M
The Renesas R-Car V4M(R8A779H0) SoC, supports up to four channels.
Fix the typo 5->4 in pattern properties.
Fixes: ced52c6ed257 ("dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support")
Cc: stable@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250307170330.173425-2-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently the flexcan driver does only support adding PHYs by using the
"old" regulator bindings. Add support for CAN transceivers as a PHY.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20250312-flexcan-add-transceiver-caps-v4-1-29e89ae0225a@liebherr.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
It makes sense that ARRAY_SIZE(prop) should == ARRAY_SIZE(prop-names),
so allow that to happen with interrupts.
Fixes bogus warnings such as:
usb@c2f8800: interrupt-names: ['pwr_event', 'qusb2_phy', 'hs_phy_irq'] is too short
Fixes: 53c6d854be4e ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250308-topic-dt_bindings_fixes_usb-v2-1-3169a3394d5b@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for the 6.15 cycle.
The usual mixture of new drivers, support in existing drivers for new
devices, a range of features and general subsystem cleanup.
Two merges of immutable branches in here:
* SPI offload support. Culmination of a long effort to bring the ability
to offload triggered sequences of SPI operations to specific hardware,
allow high datarate acquisition over an SPI bus (if you have the right
hardware / FPGA firmware)
* GPIO set-array-helper - enables code simplification.
New device support
==================
adi,ad3552r-hs:
- Add support for AD3541r and AD3542r via newly supported FPGA HDL.
adi,ad4030
- New driver supporting the AD4030, AD4630 AD4630-16, AD4640-24, AD4632-16,
AD4632-24 1 and 2 channel high precision SPI ADCs.
adi,ad4851
- New driver and backend support for the AD4851, AD4852, AD4853, AD4854,
AD4855, AD4846, AD4857, AD4858 and AD4858I high speed multichannel
simultaneous sampling ADCs.
adi,ad7191
- New driver for this 24-bit ADC for precision bridge applications,
adi,ad7380
- Add support for the adaq4381-4 which is a 14-bit version of the
already supported adaq4380-1
adi,adis16550
- New driver using the ADIS library (which needed extensions) for this
IMU.
brcm,apds9160
- New driver for this proximity and ambient light sensor.
dynaimage,al3000a
- New driver for this illuminance sensor.
mcube,mc3230
- Add support for the mc3510c accelerometer with a different scale to existing
supported parts (some rework preceded this)
nxp,imx93
- Add compatibles for imx94 and imx95 which are fully compatible with imx93.
rockchip,saradc
- Add support for the RK3528 ADC
- Add support for the RK3562 ADC
silab,si7210
- New driver to support this I2C Hall effect magnetic position sensor.
ti,ads7138
- New driver supporting the ADS7128 and AD7138 I2C ADCs.
Staging driver drop
===================
adi,adis16240
- Drop this impact sensor. Interesting part but complex hence never left
staging due to ABI challenges. No longer readily available so drop driver.
New features
============
Documentation
- A really nice overview document introduce ADC terminology and how
it maps to IIO.
core
- New description for FAULT events, used in the ad7173.
- filter_type ABI used in ad4130.
buffer-dmaengine
- Split DMA channel request from buffer allocation (for SPI offload)
- Add a new _with_handle setup variant. (for SPI offload)
adi,adf4371
- Add control of reference clock type and support for frequency doubling
where appropriate.
adi,ad4695
- Support SPI offload.
- Support oversampling control.
adi,ad5791
- Support SPI offload.
adi,ad7124
- Add channel calibration support.
adi,ad7380:
- Alert support (threshold interrupts)
- SPI offload support.
adi,ad7606
- Support writing registers when using backend enabling software control
of modes.
adi,ad7944
- Support SPI offload.
adi,ad9832
- Use devm_regulator_get_enable() to simplify code.
adi,ad9834
- Use devm_regulator_get_enable() to simplify code.
adi,adxl345
- Improve IRQ handling code.
- Add debug access to registers.
bosch,bmi270
- Add temperature channel support.
- Add data ready trigger.
google,cross_ec
- Add trace events.
mcube,mc3230
- Add mount matrix support
- Add an OF match table.
Cleanup and minor bug fixes
===========================
Tree wide:
- Stop using iio_device_claim_direct_scoped() and introduce sparse friendly
iio_device_claim/release_direct()
The conditional scoped cleanup has proved hard to deal with, requiring
workarounds for various compiler issues and in is rather non-intuitive
so abandon that experiment. One of the attractions of that approach was
that it made it much harder to have unbalanced claim/release bugs so
instead introduce a conditional-lock style boolean returning new pair
of functions. These are inline in the header and have __acquire and
__release calls allowing sparse to detect lack of balance. There are
occasional false positives but so far those have reflected complex code
paths that benefited from cleanup anyway.
The first set of driver conversions are in this pull request, more to
follow next cycle. Various related cleanup in drivers.
Removal of the _scoped code is completed and the definition removed.
- Use of str_enable_disable() and similar helpers.
- Don't set regmap cache to REGCACHE_NONE as that's the default anyway.
- Change some caches from RBTREE to MAPLE reflecting best practice.
- Use the new gpiod_multi_set_value_cansleep()
- Make sure to grab direct mode for some calibrations paths.
- Avoid using memcmp on structures when checking for matching channel configs.
Instead just match field by field.
dt-bindings:
- Fix up indentation inconsistencies.
gts-helper:
- Simplify building of available scale table.
adi,ad-sigma-delta
- Make sure to disable channel after calibration done.
- Add error handling in configuring channel during calibration.
adi,ad2s1201
- use a bitmap_write() rather than directly accessing underlying storage.
adi,ad3552r-hs
- Fix a wrong error message.
- Make sure to use instruction mode for configuration.
adi,ad4695
- Add a conversion to ensure exit from conversion mode.
- Use custom regmap to handle required sclk rate change.
- Fix an out of bounds array access
- Simplify oversampling ratio handling.
adi,ad4851
- Fix a sign bug.
adi,ad5791
- Fix wrong exported number of storage bits.
adi,ad7124
- Disable all channels at probe to avoid strange initial configurations.
adi,ad7173
- Rework to allow static const struct ad_sigma_delta without need
to make a copy.
adi,ad7623
- Drop a BSD license tag that the authors consider unnecessary.
adi,ad7768-1
- Fix channels sign description exposed to user space.
- Set MOSI idle state to avoid accidental device reset.
- Avoid some overkill locking.
adi,axi-dac
- Check if device interface is busy when enabling data stream.
- Add control of bus mode.
bosch,bmi270
- Move a struct definition to a c file as only used there.
vishay,veml6030
- Enable regmap cache to reduce bus traffic.
- Fix ABI bug around scale reporting.
vishay,vem6075
- Check array bounds to harden against broken hardware.
Various other minor tweaks and fixes not called out.
*
* tag 'iio-for-6.15a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (223 commits)
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
iio: adc: ad7124: Implement system calibration
iio: adc: ad7124: Implement internal calibration at probe time
iio: adc: ad_sigma_delta: Add error checking for ad_sigma_delta_set_channel()
iio: adc: ad4130: Adapt internal names to match official filter_type ABI
iio: adc: ad7173: Fix comparison of channel configs
iio: adc: ad7124: Fix comparison of channel configs
iio: adc: ad4130: Fix comparison of channel setups
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.15
1. HDMI fixup and refinement
2. Move to devm_platform_ioremap_resource() usage
3. Add MT8188 dsc compatible
4. Fix config_updating flag never false when no mbox channel
5. dp: drm_err => dev_err in HPD path to avoid NULL ptr
6. Add dpi power-domains example
7. Add MT8365 SoC support
8. Fix error codes in mtk_dsi_host_transfer()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312232909.9304-1-chunkuang.hu@kernel.org
|
|
Merge series from Maud Spierings <maudspierings@gocontroll.com>:
Add inital support for 2 variants of the Moduline Display controller
module slot. This system is powered by the Ka-Ro Electronics tx8p-ml81
COM, which features an imx8mp SoC.
|
|
Merge series from Ryan Walklin <ryan@testtoast.com>:
Hi All,
V3 of this patch adding headphone jack detection support to the Anbernic RGnnXX series of handhelds. V3 corrects my misunderstanding of derivation of ALSA UCM file paths, and adds recieved Reviewed-by and Tested-by tags. Thanks to those that have reviewed and fed back on previous versions.
Original message below:
This series adds the required device tree bindings to describe GPIOs for jack detection in the sun4i-codec driver, adds support for jack detection to the codec machine driver, and describes the hardware configuration in the RG35XX DTS. The existing speaker amplifier GPIO pin can then be used in concert with jack detection to enable userspace sound servers (via an ALSA UCM configuration) to disable the speaker route when headphones are connected.
Thanks to Chris Morgan for his assistance putting this series together.
Regards,
Ryan
Chris Morgan (2):
ASoC: dt-bindings: sun4i-a10-codec: add hp-det-gpios
arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX
Ryan Walklin (3):
ASoC: sun4i-codec: correct dapm widgets and controls for h616
ASoC: sun4i-codec: support hp-det-gpios property
ASoC: sun4i-codec: add h616 card long_name
.../sound/allwinner,sun4i-a10-codec.yaml | 6 ++
.../sun50i-h700-anbernic-rg35xx-2024.dts | 5 +-
sound/soc/sunxi/sun4i-codec.c | 57 ++++++++++++++++++-
3 files changed, 66 insertions(+), 2 deletions(-)
--
2.48.1
|
|
The driver support more SoCs. Add the missing ones.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250213092728.11659-2-wsa+renesas@sang-engineering.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
MT7988 has 2 different spi controllers. Add their compatibles.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241109105029.52748-1-linux@fw-web.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add remote processor PAS loader for SM8750 MPSS (modem). Device looks
fully compatible with SM8650, however it lacks fifth memory region for
Qlink Logging, according to downstream sources. This is a bit tricky,
because updated downstream sources for newer downstream release dropped
that fifth memory region as well.
There might be other differences against SM8650, because the modem
currently crashes after starting.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250221160300.160404-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add compatible for "qcom,msm8916-acc", used in msm8916.dtsi, to the dt
schema.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710155226.130086-1-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Devices integrating Allwinner SoCs may use line-out or headphone jacks
with jack detection circuits attached to a GPIO. Support defining these
in DTs.
A number of Anbernic devices featuring the H700 SoC use this mechanism
to switch between a headphone jack and an internal speaker, so add these
to the allowed routing items.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
--
Changelog v1..v2:
- Remove vendor prefix from hp-det-gpios
Changelog v2..v3:
- Add Reviewed-by tag
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-2-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the bindings that describe a GOcontroll Moduline module slot. This
slot provides all the interfaces to interface with a Moduline compatible
IO module. The actual module is not reasonable to describe as it can be
swapped at will, with this connector the driver will be able to probe
for a module on boot.
The connector consists of 2 parts, one part for interfacing with the SoC
and main board, the other part has 13 IO channels for the module to
interact with the outside world. The functions of these IO channels are
determined by the type of module in the slot. The IO on the SoC side is
as follows:
- a 3v3 supply, this tends to be the logic level of the module and its
microcontroller
- a 5v0 supply, this can be used to power low power peripherals on the
module
- a 6v-8v supply, this can be used for high power peripherals on the
module
- a 6v-30v supply, this tends to be a dirty supply that comes from the
controller supply after some circuit protection, or is the same as
the 6v-8v supply.
- an SPI bus which carries the communication between the SoC and the
microcontroller on the module.
- an I2C bus shared between the SoC and all module slots which can
carry direct module-to-module communication.
- a reset line
- an interrupt line that indicates a clear to transmit signal
- a sync line shared between the SoC and all module slots which could
be used to synchronize modules for time sensitive IO spread across
modules.
- a SMBus alert line that is shared between the modules but is not
connected to the SoC so that is ignored.
A slot-number property is used to identify the physical location of a
module slot. Without it, it would be impossible to identify which module
to control if there are multiple of one type, to address the desired IO.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-3-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
GOcontroll produces embedded linux systems and IO modules to use in
these systems, add its prefix.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-2-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A variant of TAS2770 known as TAS5770L is found in Apple Silicon Macs.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-2-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The TI SN012776 is a variant of TAS2764 found in Apple Silicon Macs.
It continues Apple's long-standing policy of getting vendors to
spin out subtly incompatible and Apple-exclusive variants of their
publicly available parts.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-1-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the Xiaomi Redmi Note 8 (codenamed ginkgo),
which is based off the SM6125 SoC.
Signed-off-by: Gabriel Gonzales <semfault@disroot.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250311003353.8250-2-semfault@disroot.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py")
de94e8697405 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0fa0 ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175ccad4 ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f913 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On the QCM6490 boards, the LPASS firmware controls the complete clock
controller functionalities and associated power domains. However, only
the LPASS resets required to be controlled by the high level OS. Thus,
add the new QCM6490 compatible to support the reset functionality for
Low Power Audio subsystem.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250221-lpass_qcm6490_resets-v5-1-6be0c0949a83@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Convert the TI clkctrl clock device tree binding to json-schema.
Specify the creator of the original binding as a maintainer.
reg property is used mostly with one item, in am3xxx also with
an arbitrary number of items, so divert from the original binding
specifying two (probably meaning one address and one size).
The consumer part of the example is left out because the full consumer
node would be needed.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20250311180215.173634-1-andreas@kemnade.info
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Assert and deassert functionality of the DSP found on i.MX8MP is
realized by combining control bits from two modules: Audio Block
Control and Debug Access Port.
Audio block control bits are used to Run/Stall the DSP core
while the DAP bits are used for software reset the core.
The original plan was to use fsl,dsp-ctrl property and to refer the
audiomix bits via syscon interface. This proposal received NACK from
community we shouldn't abuse the syscon interface [1].
So remove fsl,dsp-ctrl property for i.MX8MP and use reset control
interface instead.
Example dts node only uses runstall control now, but softreset will
be added in the future when we will convert the softreset functionality
to use reset controller API.
[1] https://patchwork.kernel.org/project/imx/patch/20250212085222.107102-6-daniel.baluta@nxp.com/
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-3-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The A523 contains a pin controller similar to previous SoCs, although
using 10 GPIO banks (PortB-PortK), all of them being IRQ capable.
With this SoC we introduce a new style of binding, where the pinmux values
for each pin group are stored in the new "allwinner,pinmux" property in
the DT node, instead of requiring every driver to store a mapping between
the function names and the required pinmux.
Add a new binding file, since all the different variants of the old
binding are making the file a bit unwieldy to handle already, and the new
property would make the situation worse.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250306235827.4895-7-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The kernel communicates with the E902 core through the mailbox
transport using AON firmware protocol. Add dt-bindings to document it
the dt node.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Acked-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20250311171900.1549916-2-m.wilczynski@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
S2MPU05 is a PMIC found in Exynos7870 devices, which controls voltage
regulators (21 LDOs and 5 BUCKs). Provide documentation for devicetree
definitions, regulator naming patterns, etc.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-pmic-regulators-v3-1-808d0b47a564@disroot.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The `snps,dwmac.yaml` binding currently sets `maxItems: 3` for the
`interrupts` and `interrupt-names` properties, but vendor bindings
selecting `snps,dwmac.yaml` do not impose these limits.
Define constraints for `interrupts` and `interrupt-names` properties in
various DWMAC vendor bindings to ensure proper validation and consistency.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://patch.msgid.link/20250309003301.1152228-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All Rockchip GMAC variants typically write to GRF regs to control e.g.
interface mode, speed and MAC rx/tx delay. Newer SoCs such as RK3562,
RK3576 and RK3588 use a mix of GRF and peripheral GRF regs.
Prior to the commit b331b8ef86f0 ("dt-bindings: net: convert
rockchip-dwmac to json-schema") the property rockchip,grf was listed
under "Required properties". During the conversion this was lost and
rockchip,grf has since then incorrectly been treated as optional and
not as required.
Similarly, when rockchip,php-grf was added to the schema in the
commit a2b77831427c ("dt-bindings: net: rockchip-dwmac: add rk3588 gmac
compatible") it also incorrectly has been treated as optional for all
GMAC variants, when it should have been required for RK3588, and later
also for RK3576.
Update this binding to require rockchip,grf and rockchip,php-grf to
properly reflect that GRF (and peripheral GRF for RK3576/RK3588) is
required to control part of GMAC.
This should not introduce any breakage as all Rockchip GMAC nodes have
been added together with a rockchip,grf phandle (and rockchip,php-grf
where required) in their initial commit.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250308213720.2517944-2-jonas@kwiboo.se
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
System Controller Firmware(SCU) reset some peripherals, such as CSI. So add
reset-controller for it.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250210-8qxp_camera-v3-1-324f5105accc@nxp.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add documentation for SAM9X7 reset controller.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20241010120419.93043-1-varshini.rajendran@microchip.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
