summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)Author
2025-01-12Merge tag 'char-misc-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc/IIO driver fixes from Greg KH: "Here are a bunch of small IIO and interconnect and other driver fixes to resolve reported issues. Included in here are: - loads of iio driver fixes as a result of an audit of places where uninitialized data would leak to userspace. - other smaller, and normal, iio driver fixes. - mhi driver fix - interconnect driver fixes - pci1xxxx driver fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (32 commits) misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling interconnect: icc-clk: check return values of devm_kasprintf() interconnect: qcom: icc-rpm: Set the count member before accessing the flex array iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer iio: temperature: tmp006: fix information leak in triggered buffer iio: inkern: call iio_device_put() only on mapped devices iio: adc: ad9467: Fix the "don't allow reading vref if not available" case iio: adc: at91: call input_free_device() on allocated iio_dev iio: adc: ad7173: fix using shared static info struct iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep() iio: adc: ti-ads1119: fix information leak in triggered buffer iio: pressure: zpa2326: fix information leak in triggered buffer iio: adc: rockchip_saradc: fix information leak in triggered buffer iio: imu: kmx61: fix information leak in triggered buffer iio: light: vcnl4035: fix information leak in triggered buffer iio: light: bh1745: fix information leak in triggered buffer iio: adc: ti-ads8688: fix information leak in triggered buffer iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer iio: test: Fix GTS test config ...
2025-01-12Merge tag 'iio-for-6.14a' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Pull IIO updaate from Jonathan: IIO: 1st set of new device support, features and cleanup for 6.14 Fairly quiet cycle. Usual mix of new drivers, device support in existing drivers, features and more general rework and cleanup. There are a few late breaking or long standing but complex fixes in here as well. There is one expected merge conflict due to an upstream fix touching neighboring code in ti-ads1119. The trivial resolution is the right one with the result ending up as: struct { s16 sample; aligned_s64 timestamp; } scan; New device support ================== adi,ad4000 - Add support for many Pulsar ADC devices: AD7685, AD7686, AD7687, AD7688, AD7690, AD7691, AD7693, AD7942, AD7946, AD7980, AD7982, AD7983, AD7984, AD7988-1 and AD7988-5 ADCs. Generally similar to the AD4000 series but with lower sampling rates and no configuration registers. Includes addition of timestamp channels. adi,adis16480 - Add support for ADIS16486, ADIS16487 and ADIS16489 IMUs. Required a few tweaks to existing driver and addition of tables. kionix,kx022a - Add support for KX134ACR-LBZ accelerometer that is similar to the KX132ACR-LBZ but with a wider (+-64G) sensor range. - Add support for KX134-1211 accelerometer that is similar to the KX132-1211 but with a wider (+-16G) sensor range. nxp,fxls8962af - Add support for fxls8974cf and fxls8967af accelerometers, Both are compatible with fxls8962af but with different device IDs which are used in presence checks. renesas,rzg2l - Add support for Renesas RZ/GS3 SoC ADCs (various driver refactors precede this to allow for chip differences). rohm,bd79704 - New driver for this 6 channel DAC. st,mpu6050 - Support he IAM20380 which is effectively a cut down IAM20608 IMU with only a gyroscope (no accelerometer). st,stm-timmer-trigger - Add support for ADC trigger use case for the STM32MP25 SOC. Do not support the counter functionality in this driver as that is handled by the counter subsystem. ti,opt4060 - New driver for this RGBW color sensor. Driver drop =========== rohm,bu20008 - Drop as decision was made to not mass produce this light sensor after Matti had done all the work to get a driver upstream. Features ======== adi,ad_sigma_delta library + ad7124 - Allow for GPIO to check interrupt status, enabling this device on more platforms that don't obey prior (non general) assumptions on how the interrupt chips work. - Allow variation in reset sequence length allowing chip specific optimizations rather than always using worst case. adi,ad7124 - Add temperature channel support. adi,ad7173 - Add support calibration modes for this family of ADCs. adi,adxl345 - Binding update to allow specification of which interrupt line is connected (or none). - Support interrupts and FIFO based data capture. bosch,bme680 - Add regulators support. Note this required a new binding doc rather than use of trivial-devices - Runtime PM support. microchip,pac1921 - Add ACPI support including _DSM for shunt value and label. renesas,rzg2l - Enable runtime autosuspend. - Add suspend and resume support. tyhx,hx9023s - Add loading of a firmware file used to set defaults for some configuration registers. vishay,veml6030 - Support triggered buffers allowing efficient data capture at higher speeds. - Add regmap cache to reduce access to device. Cleanup and minor fixes ======================= cross-tree - Another batch of conversions to devm_regulator_get_enable_read_voltage() helper and related conversions to full devm that this enables. - Various patches using guard() to allow early returns and simpler code flow. - Various conversions from s64 timestamp __aligned(8) to aligned_s64 type. Includes a few cleanups where this unsigned and it should have been signed. - Fix up some missing types for drive-open-drain in dt-binding docs. core - Add missing documentation for iio_dmaengine_buffer_setup_ext() - Add check that all buffers passed to iio_read_channel_ext_info() and iio_read_channel_label() are page sized and page aligned. Done this way because the callbacks are almost always only used to fill sysfs attributes. The check covers the tiny percentage of cases where use is made of this data in a consumer driver. - Mark scan_timestamp memory of struct iio_dev private ensuring no drivers change the value which belongs to the IIO core. documentation - Various missing ABI docs added. - ABI docs made to use Y consistently as the wildcard for channel number. - Combine duplicate in_currentY_raw entries in ABI docs. iio-mux - Fix alignment of buffers passed to iio_channel_read_ext_info(). adi,ad_sigma_delta library - Respect keep_cs_asserted flag in read path. - Close a race condition around irq enabling and disabling. - Use explicit unsigned int in place of unsigned. adi,ad6695 - Move dt-binding header under adc sub-directory and fix include path in dt example. adi,ad7124 - Check number of channels in DT doesn't exceed what the driver can handle. - Check input specified in DT are possible. - Improved error reporting during probe. adi,ad7173 - Drop unused structure element. adi,ad7293 - Ensure power is turned on before resetting. adi,adxl345 - Some documentation simplification and parameter renames. - Add a function than unifies handling of power up and power down. - Add defines to have a complete set of registers defined. - Add missing \n to end of error messages. amlogic,meson_saradc - Simplify handling of the REG11 register access. awinic,aw96104 - Constify iio_info structure. bosch,bmp085 - Add to dt-binding to indicate devices support SPI. bosch,bmp280 - Use sizeof() to replace a somewhat magic 2. - Rename sleep related variables so the unit is included and use fsleep() to replace usleep_range() calls. bosch,bno055 - Constify struct bin_attribute capella,cm3232 - Reset device before checking hardware ID inline with suggested flow from datasheet. diolan,dln2 - Simplify zeroing of structure used to gather up data by just clearing the whole thing before writing rather than trying to clear out he padding after write. freescale,vf610 - Use devm_ and dev_error_probe() to simplify code and allow dropping of explicit remove() callback. invensense,timestamp library - Use a cast to remove possibility of integer overflow. kionix,kx022a - Increase reset delay a little. maxim,max1363 - Use a buffer of sufficient size in iio_priv() rather than allocating variable sized buffer at use time. microchip,mcp4725 - Replace of_property_read_bool() with of_property_present() for detecting presence of regulator which is obviously not a bool. nxp,fxls8962af - Add wakeup-source property to the dt binding to allow these sensors to wake the system up from suspend. - Enable finer grained build when not all bus types need to be supported. renesas,rzg2l - Use dev_err_probe(), improving handling of probe errors and simplifying code. - Convert to devm_ based cleanup. - Remove unnecessary runtime PM complexity as clocks are managed through PM domains. - Switch pm_ptr() removing need for __maybe_unused markings. - use read_poll_timeout() to replace open coded equivalent. samsung, ssp_sensors - Simplify code by always providing timestamp whether or not it is enabled. st,lsm6dsx - Avoid need to include linux/i3c/master by using i3cdev_to_dev() to get to the contained struct device. st,stm32-timer-trigger - Check for clk_enable() fails. vishay,veml6030 - Use new gts-helper functions and fix the _scale attribute to take into account changes in gain and integration time. Various other typo fixes in variable names + documentation and help text. A few whitespace cleanup patches. * tag 'iio-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits) iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment iio: adc: ad7625: Add ending newlines to error messages iio: accel: adxl345: complete the list of defines iio: accel: adxl345: add FIFO with watermark events iio: accel: adxl345: initialize FIFO delay value for SPI iio: accel: adxl345: introduce interrupt handling iio: light: veml3235: fix scale to conform to ABI iio: gts-helper: add helpers to ease searches of gain_sel and new_gain iio: light: veml3235: extend regmap to add cache iio: light: veml3235: fix code style dt-bindings: iio: accel: adxl345: add interrupt-names dt-bindings: iio: accel: adxl345: make interrupts not a required property dt-bindings: iio: imu: bmi323: add boolean type for drive-open-drain dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain dt-bindings: iio: imu: bmi160: add boolean type for drive-open-drain iio: adc: meson: simplify MESON_SAR_ADC_REG11 register access iio: adc: meson: use tabs instead of spaces for some REG11 bit fields iio: adc: meson: fix voltage reference selection field name typo iio: adc: rockchip: correct alignment of timestamp iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64 ...
2025-01-12Merge tag 'coresight-next-v6.14' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next Pull coresight updates from Suzuki: coresight: Updates for Linux v6.14 Coresight self-hosted tracing subsystem updates for v6.14 includes: - Support for static traceid allocation for devices - Support for impdef, static trace filtering in Qualcomm replicators - Miscellaneous fixes Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> * tag 'coresight-next-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux: coresight-tpda: Optimize the function of reading element size coresight: Add support for trace filtering by source coresight: Add a helper to check if a device is source dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering coresight: Fix dsb_mode_store() unsigned val is never less than zero coresight: dummy: Add static trace id support for dummy source coresight: Add support to get static id for system trace sources dt-bindings: arm: Add arm,static-trace-id for coresight dummy source coresight: Drop atomics in connection refcounts Coresight: Narrow down the matching range of tpdm
2025-01-11dt-bindings: usb: Correct indentation and style in DTS exampleKrzysztof Kozlowski
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> # aspeed,usb-vhub.yaml Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # ti,tusb73x0-pci.yaml Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> # brcm,bdc.yaml Acked-by: Benjamin Bara <benjamin.bara@skidata.com> # cypress,hx3.yaml Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas Link: https://lore.kernel.org/r/20250107131015.246461-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10Merge tag 'linux-can-next-for-6.14-20250110' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2025-01-10 Pierre-Henry Moussay adds PIC64GX compatibility to the DT bindings for Microchip's mpfs-can IP core. The next 3 patches are by Sean Nyekjaer and target the tcan4x5x driver. First the DT bindings is converted to DT schema, then nWKRQ voltage selection is added to the driver. Dario Binacchi's patch for the sun4i_can makes the driver more consistent by adding a likely() to the driver. Another patch by Sean Nyekjaer for the tcan4x5x driver gets rid of a false error message. Charan Pedumuru converts the atmel-can DT bindings to DT schema. The next 2 patches are by Oliver Hartkopp. The first one maps Oliver's former mail addresses to a dedicated CAN mail address. The second one assigns net/sched/em_canid.c additionally to the CAN maintainers. Ariel Otilibili's patch removes dead code from the CAN dev helper. The next 3 patches are by Sean Nyekjaer and add HW standby support to the tcan4x5x driver. A patch by Dario Binacchi fixes the DT bindings for the st,stm32-bxcan driver. The last 4 patches are by Jimmy Assarsson and target the kvaser_usb and the kvaser_pciefd driver: error statistics are improved and CAN_CTRLMODE_BERR_REPORTING is added. * tag 'linux-can-next-for-6.14-20250110' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: kvaser_pciefd: Add support for CAN_CTRLMODE_BERR_REPORTING can: kvaser_pciefd: Update stats and state even if alloc_can_err_skb() fails can: kvaser_usb: Add support for CAN_CTRLMODE_BERR_REPORTING can: kvaser_usb: Update stats and state even if alloc_can_err_skb() fails dt-bindings: can: st,stm32-bxcan: fix st,gcan property type can: m_can: call deinit/init callback when going into suspend/resume can: tcan4x5x: add deinit callback to set standby mode can: m_can: add deinit callback can: dev: can_get_state_str(): Remove dead code MAINTAINERS: assign em_canid.c additionally to CAN maintainers mailmap: add an entry for Oliver Hartkopp dt-bindings: net: can: atmel: Convert to json schema can: tcan4x5x: get rid of false clock errors can: sun4i_can: continue to use likely() to check skb can: tcan4x5x: add option for selecting nWKRQ voltage dt-bindings: can: tcan4x5x: Document the ti,nwkrq-voltage-vio option dt-bindings: can: convert tcan4x5x.txt to DT schema dt-bindings: can: mpfs: add PIC64GX CAN compatibility ==================== Link: https://patch.msgid.link/20250110112712.3214173-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10Merge tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular weekly fixes, this has the usual amdgpu/xe/i915 bits. There is a bigger bunch of mediatek patches that I considered not including at this stage, but all the changes (except for one were obvious small fixes, and the rotation one is a few lines, and I suppose will help someone have their screen up the right way), I decided to include it since I expect it got slowed down by holidays etc, and it's not that mainstream a hw platform. i915: - Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" amdgpu: - Display interrupt fixes - Fix display max surface mismatches - Fix divide error in DM plane scale calcs - Display divide by 0 checks in dml helpers - SMU 13 AD/DC interrrupt handling fix - Fix locking around buddy trim handling amdkfd: - Fix page fault with shader debugger enabled - Fix eviction fence wq handling xe: - Avoid a NULL ptr deref when wedging - Fix power gate sequence on DG1 mediatek: - Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing" - Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err - Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb() - Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported - Add support for 180-degree rotation in the display driver - Stop selecting foreign drivers - Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" - Fix YCbCr422 color format issue for DP - Fix mode valid issue for dp - dp: Reference common DAI properties - dsi: Add registers to pdata to fix MT8186/MT8188 - Remove unneeded semicolon - Add return value check when reading DPCD - Initialize pointer in mtk_drm_of_ddp_path_build_one()" * tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel: (26 commits) drm/xe/dg1: Fix power gate sequence. drm/xe: Fix tlb invalidation when wedging Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" drm/amdgpu: Add a lock when accessing the buddy trim function drm/amd/pm: fix BUG: scheduling while atomic drm/amdkfd: wq_release signals dma_fence only when available drm/amd/display: Add check for granularity in dml ceil/floor helpers drm/amdkfd: fixed page fault when enable MES shader debugger drm/amd/display: fix divide error in DM plane scale calcs drm/amd/display: increase MAX_SURFACES to the value supported by hw drm/amd/display: fix page fault due to max surface definition mismatch drm/amd/display: Remove unnecessary amdgpu_irq_get/put drm/mediatek: Initialize pointer in mtk_drm_of_ddp_path_build_one() drm/mediatek: Add return value check when reading DPCD drm/mediatek: Remove unneeded semicolon drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188 dt-bindings: display: mediatek: dp: Reference common DAI properties drm/mediatek: Fix mode valid issue for dp drm/mediatek: Fix YCbCr422 color format issue for DP Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" ...
2025-01-10dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extensionKrzysztof Kozlowski
Add TXT file extension so the format of binding will be explicit (we have also bindins in YAML). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250107131111.246969-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-10dt-bindings: interrupt-controller: Correct indentation and style in DTS exampleKrzysztof Kozlowski
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> # aspeed,ast2400-vic.yaml Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20250107131108.246898-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-10dt-bindings: display: Correct indentation and style in DTS exampleKrzysztof Kozlowski
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas Link: https://lore.kernel.org/r/20250107125854.227233-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-10dt-bindings: serial: sc16is7xx: Add description for polling modeAndre Werner
Polling mode is enabled if the "interrupts" property is missing. Thus, this commit deletes "interrupts" entry from "required" section and adds a description for the fallback to polling mode at the "interrupts" entry. Signed-off-by: Andre Werner <andre.werner@systec-electronic.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250110073104.1029633-1-andre.werner@systec-electronic.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10dt-bindings: can: st,stm32-bxcan: fix st,gcan property typeDario Binacchi
The SRAM memory shared pointed to by the st,gcan property is unique, so we don't need an array of phandles. Fixes: e43250c0ac81 ("dt-bindings: net: can: add STM32 bxcan DT bindings") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241228150043.3926696-1-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-01-10Merge tag 'mediatek-drm-fixes-20250104' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes - 20250104 1. Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing" 2. Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err 3. Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb() 4. Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported 5. Add support for 180-degree rotation in the display driver 6. Stop selecting foreign drivers 7. Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" 8. Fix YCbCr422 color format issue for DP 9. Fix mode valid issue for dp 10. dp: Reference common DAI properties 11. dsi: Add registers to pdata to fix MT8186/MT8188 12. Remove unneeded semicolon 13. Add return value check when reading DPCD 14. Initialize pointer in mtk_drm_of_ddp_path_build_one() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250104124227.45505-1-chunkuang.hu@kernel.org
2025-01-10Merge tag 'v6.13-rc6' into drm-nextDave Airlie
This backmerges Linux 6.13-rc6 this is need for the newer pulls. Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc7). Conflicts: a42d71e322a8 ("net_sched: sch_cake: Add drop reasons") 737d4d91d35b ("sched: sch_cake: add bounds checks to host bulk flow fairness counts") Adjacent changes: drivers/net/ethernet/meta/fbnic/fbnic.h 3a856ab34726 ("eth: fbnic: add IRQ reuse support") 95978931d55f ("eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10dt-bindings: arm: rockchip: Add Firefly ITX-3588J boardShimrra Shai
Document board compatible bindings. Signed-off-by: Shimrra Shai <shimrrashai@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241216214152.58387-2-shimrrashai@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-01-09dt-bindings: opp: h6: Add A100 operating pointsCody Eksal
The A100, similar to the H6 and H616, use an NVMEM value to determine speed binnings. The method used is similar to that of the H6. However, the information is stored at a slightly different bit offset. Add a new compatible for the A100. Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20241031070232.1793078-12-masterr3c0rd@epochal.quest Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-09dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 MaxJimmy Hon
Add devicetree binding for the Xunlong Orange Pi 5 Max board. The Orange Pi 5 Max is a single board computer powered by the Rockchip RK3588 similar to the Orange Pi 5 Plus. Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20250109051619.1825-3-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-01-09dt-bindings: net: qcom,ipa: Use recommended MBN firmware format in DTS exampleKrzysztof Kozlowski
All Qualcomm firmwares uploaded to linux-firmware are in MBN format, instead of split MDT. No functional changes, just correct the DTS example so people will not rely on unaccepted files. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alex Elder <elder@kernel.org> Link: https://patch.msgid.link/20250108120242.156201-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09dt-bindings: net: Correct indentation and style in DTS exampleKrzysztof Kozlowski
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can Reviewed-by: Roger Quadros <rogerq@kernel.org> # for ti,k3-am654-* Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> # net/brcm,* Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://patch.msgid.link/20250107125613.211478-1-krzysztof.kozlowski@linaro.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09spi: Merge up v6.13-rc6Mark Brown
This fixes the i.MX6 and newer Meson platforms in my CI.
2025-01-09dt-bindings: mfd: syscon: Add rk3562 QoS register compatibleKever Yang
Document rk3562 compatible for QoS registers. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Link: https://lore.kernel.org/r/20241224094920.3821861-16-kever.yang@rock-chips.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-01-09dt-bindings: mfd: atmel: Convert to YAML schemaCharan Pedumuru
Changes during conversion: The text binding is misleading, add a fallback `atmel,at91sam9260-gpbr` for both `microchip,sam9x60-gpbr` and `microchip,sam9x7-gpbr` which is missing in old binding and `microchip,sam9x60-gpbr` is not a fallback for `microchip,sam9x7-gpbr`. Signed-off-by: Charan Pedumuru <charan.pedumuru@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241219-gpbr-v1-1-e19a562ebf81@microchip.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-01-09dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schemaCharan Pedumuru
Changes during conversion: Add a missing fallback `atmel,at91sam9x5-matrix` for `microchip,sam9x60-matrix` which is not defined in the text binding. Signed-off-by: Charan Pedumuru <charan.pedumuru@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241218-matrix-v2-1-f3a8809ee5cd@microchip.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-01-09dt-bindings: leds: Convert LP8860 into YAML formatAlexander Sverdlin
Convert Texas Instruments' LP8860 LED driver bindings into YAML format. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Acked-by: Andrew Davis <afd@ti.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20241218210631.72997-1-alexander.sverdlin@siemens.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-01-09dt-bindings: leds: Add LED1202 LED ControllerVicentiu Galanopulo
The LED1202 is a 12-channel low quiescent current LED driver with: * Supply range from 2.6 V to 5 V * 20 mA current capability per channel * 1.8 V compatible I2C control interface * 8-bit analog dimming individual control * 12-bit local PWM resolution * 8 programmable patterns If the led node is present in the controller then the channel is set to active. Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241218183401.41687-3-vicentiu.galanopulo@remote-tech.co.uk Signed-off-by: Lee Jones <lee@kernel.org>
2025-01-09dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindingsStanislav Jakubek
Directly reference the sc2731-efuse bindings to simplify the schema. Remove the duplicate example from the efuse bindings. While at it, add the "pmic_adc" label that was missed during the initial YAML conversion. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Link: https://lore.kernel.org/r/Z1_9ROiI2ZHKsbAD@standask-GA-A55M-S2HP Signed-off-by: Lee Jones <lee@kernel.org>
2025-01-09Merge tag 'w1-drv-6.14' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next Krzysztof writes: 1-Wire bus drivers for v6.14 1. ds2482: Add support for handling the VCC regulator supply and three more minor improvements/cleanups. 2. Constify 'struct bin_attribute' in all drivers. 3. W1 core: use sysfs_emit() instead of sprintf(), as preferred coding style. * tag 'w1-drv-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1: w1: core: use sysfs_emit() instead of sprintf() w1: ds28e04: Constify 'struct bin_attribute' w1: ds2805: Constify 'struct bin_attribute' w1: ds2781: Constify 'struct bin_attribute' w1: ds2780: Constify 'struct bin_attribute' w1: ds2438: Constify 'struct bin_attribute' w1: ds2433: Constify 'struct bin_attribute' w1: ds2431: Constify 'struct bin_attribute' w1: ds2430: Constify 'struct bin_attribute' w1: ds2413: Constify 'struct bin_attribute' w1: ds2408: Constify 'struct bin_attribute' w1: ds2406: Constify 'struct bin_attribute' w1: Constify 'struct bin_attribute' w1: ds2482: Fix datasheet URL w1: ds2482: Add regulator support w1: ds2482: switch to devm_kzalloc() from kzalloc() dt-bindings: w1: ds2482: Add vcc-supply property
2025-01-09Merge tag 'drm-misc-next-2025-01-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for 6.14: UAPI Changes: - Clarify drm memory stats documentation Cross-subsystem Changes: Core Changes: - sched: Documentation fixes, Driver Changes: - amdgpu: Track BO memory stats at runtime - amdxdna: Various fixes - hisilicon: New HIBMC driver - bridges: - Provide default implementation of atomic_check for HDMI bridges - it605: HDCP improvements, MCCS Support Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250106-augmented-kakapo-of-action-0cf000@houat
2025-01-08dt-bindings: net: pse-pd: Fix unusual character in documentationKory Maincent
The documentation contained an unusual character due to an issue in my personal b4 setup. Fix the problem by providing the correct PSE Pinout Alternatives table number description. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250107142659.425877-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08dt-bindings: firmware: qcom,scm: Document ipq5424 SCMManikanta Mylavarapu
Document the scm compatible for ipq5424 SoC. Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241204133627.1341760-2-quic_mmanikan@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-08dt-bindings: arm: rockchip: Add Radxa E52CFUKAUMI Naoki
Add devicetree binding for the Radxa E52C. Radxa E52C is a compact network computer based on the Rockchip RK3582 SoC. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20241226024630.13702-2-naoki@radxa.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-01-08ASoC: Merge up v6.13-rc6Mark Brown
This helps several of my boards in CI.
2025-01-08dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2Ivan Sergeev
BigTreeTech CB2 and Pi2 are Rockchip RK3566 based boards Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Ivan Sergeev <ivan8215145640@gmail.com> Link: https://lore.kernel.org/r/20250106-bigtreetech-cb2-v7-1-565567e2c0a4@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-01-08dt-bindings: arm: rockchip: Add H96 Max V58 TV boxAlexey Charkov
Add Devicetree binding for H96 Max V58: a compact Rockchip RK3588 based device that ships with Android and is meant for use as a TV connected media box. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alexey Charkov <alchark@gmail.com> Link: https://lore.kernel.org/r/20250108-rk3588-h96-max-v58-v2-1-522301b905d6@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-01-08dt-bindings: arm: rockchip: Add rk3576 evb1 boardKever Yang
Add device tree documentation for rk3576-evb1-v10. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250107074911.550057-7-kever.yang@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-01-08dt-bindings: arm: rockchip: Sort for boards not in correct orderKever Yang
The board entries should be sort in correct order by the description string. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250107074911.550057-6-kever.yang@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-01-08dt-bindings: pwm: Correct indentation and style in DTS exampleKrzysztof Kozlowski
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20250107125831.225068-1-krzysztof.kozlowski@linaro.org Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2025-01-07dt-bindings: clock: move qcom,x1e80100-camcc to its own fileBryan O'Donoghue
Add an x1e80100 camcc binding. x1e80100 has two power-domain parents unlike other similar camcc controllers. Differentiate the new structure into a unique camcc definition. Other similar camcc controller setups can then be easily added to this one. Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20250102-b4-linux-next-24-11-18-dtsi-x1e80100-camss-v3-2-cb66d55d20cc@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07dt-bindings: clock: qcom,rpmcc: Add MSM8940 compatibleDaniil Titov
Document the qcom,rpmcc-msm8940 compatible. Signed-off-by: Daniil Titov <daniilt971@gmail.com> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20241231-rpmcc-v1-3-1212df9b2042@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07dt-bindings: clock: qcom,rpmcc: Add MSM8937 compatibleDaniil Titov
Document the qcom,rpmcc-msm8937 compatible. Signed-off-by: Daniil Titov <daniilt971@gmail.com> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20241231-rpmcc-v1-1-1212df9b2042@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07dt-bindings: clock: Add Qualcomm SM6115 LPASS clock controllerKonrad Dybcio
SM6115 (and its derivatives or similar SoCs) has an LPASS clock controller block which provides audio-related resets. Add bindings for it. Cc: Konrad Dybcio <konradybcio@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> [alexey.klimov slightly changed the commit message] Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> Link: https://lore.kernel.org/r/20241212002551.2902954-2-alexey.klimov@linaro.org [bjorn: Adjusted Konrad's address] Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07dt-bindings: cache: qcom,llcc: Add IPQ5424 compatibleVaradarajan Narayanan
Document the Last Level Cache Controller on IPQ5424. The 'broadcast' register space is present only in chipsets that have multiple instances of LLCC IP. Since IPQ5424 has only one instance, both the LLCC and LLCC_BROADCAST points to the same register space. Hence, allow only '1' reg & reg-names entry for IPQ5424. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20241121051935.1055222-2-quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07dt-bindings: samsung,mipi-dsim: Add imx7d specific compatibleAlexander Stein
This add a imx7(d) specific compatible which is compatible to imx8mm. This silences the dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: dsi@30760000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx7d-mipi-dsim', 'fsl,imx8mm-mipi-dsim'] is too long Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250107094943.518474-3-alexander.stein@ew.tq-group.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-07dt-bindings: i2c: qcom-cci: Document x1e80100 compatibleBryan O'Donoghue
Add the x1e80100 CCI device string compatible. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241227-b4-linux-next-24-11-18-dtsi-x1e80100-camss-v2-1-06fdd5a7d5bb@linaro.org Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2025-01-07dt-bindings: i2c: exynos5: Add samsung,exynos8895-hsi2c compatibleIvaylo Ivanov
Add samsung,exynos8895-hsi2c dedicated compatible for representing I2C of Exynos8895 SoC. Since there are I2C buses that aren't implemented as a part of USIv1 blocks, they only require a single clock. Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20241228111509.896502-2-ivo.ivanov.ivanov1@gmail.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2025-01-07dt-bindings: i2c: renesas,riic: Document the R9A09G047 supportBiju Das
Document support for the I2C Bus Interface (RIIC) found in the Renesas RZ/G3E (R9A09G047) SoC. This IP is compatible with Renesas RZ/V2H (R9A09G057) RIIC IP. Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20241216202436.185773-1-biju.das.jz@bp.renesas.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2025-01-07dt-bindings: clock: xilinx: Add reset GPIO for VCURohit Visavalia
It is marked as optional as some of the ZynqMP designs are having vcu_reset (reset pin of VCU IP) driven by proc_sys_reset, proc_sys_reset is another PL IP driven by the PS pl_reset. So, here the VCU reset is not driven by axi_gpio or PS GPIO so there will be no GPIO entry. Signed-off-by: Rohit Visavalia <rohit.visavalia@amd.com> Link: https://lore.kernel.org/r/20250107044038.100945-3-rohit.visavalia@amd.com Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-07dt-bindings: clock: xilinx: Convert VCU bindings to dtschemaRohit Visavalia
Convert AMD (Xilinx) VCU bindings to yaml format. Additional changes: - move xlnx_vcu DT binding to clock from soc following commit a2fe7baa27a4 ("clk: xilinx: move xlnx_vcu clock driver from soc") - corrected clock sequence as per xilinx device-tree generator Signed-off-by: Rohit Visavalia <rohit.visavalia@xilinx.com> Link: https://lore.kernel.org/r/20250107044038.100945-2-rohit.visavalia@amd.com Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-07Merge tag 'renesas-clk-for-v6.14-tag2' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull Renesas clk driver updates from Geert Uytterhoeven: - Add support for the RZ/G3E (R9A09G047) SoC - Add Module Stop (MSTOP) support on RZ/V2H - Add Image Signal Processor helper block (FCPVX and VSPX) clocks on R-Car V4H SoC - Add System Controller (SYS) reset and Generic Interrupt Controller (GIC) clock and reset entries on RZ/V2H * tag 'renesas-clk-for-v6.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: dt-bindings: clock: renesas,r9a08g045-vbattb: Fix include guard clk: renesas: r9a09g057: Add clock and reset entries for GIC clk: renesas: r9a09g057: Add reset entry for SYS clk: renesas: r8a779g0: Add VSPX clocks clk: renesas: r8a779g0: Add FCPVX clocks clk: renesas: r9a09g047: Add I2C clocks/resets clk: renesas: r9a09g047: Add CA55 core clocks clk: renesas: rzv2h: Add support for RZ/G3E SoC clk: renesas: rzv2h: Add MSTOP support dt-bindings: clock: renesas: Document RZ/G3E SoC CPG dt-bindings: soc: renesas: Document RZ/G3E SMARC SoM and Carrier-II EVK dt-bindings: soc: renesas: Document Renesas RZ/G3E SoC variants
2025-01-07dt-bindings: soc: altera: convert socfpga-system.txt to yamlNiravkumar L Rabara
Convert socfpga-system.txt to altr,socfpga-sys-mgr.yaml and move to soc directory. Add platform names in description for clarity. ARM(32-bit) platforms Cyclone5, Arria5 and Arria10 is using "altr,sys-mgr" compatible, while ARM64 is using "altr,sys-mgr-s10" compatible. Removed "cpu1-start-addr" for ARM64 as it is not required. Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com> Link: https://lore.kernel.org/r/20250107105129.2784203-1-niravkumar.l.rabara@intel.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-22 12:45:09 +0000