summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)Author
2024-12-24dt-bindings: dma: fsl-edma: add nxp,s32g2-edma compatible stringLarisa Grigore
Introduce the compatible strings 'nxp,s32g2-edma' and 'nxp,s32g3-edma' to enable the support for the eDMAv3 present on S32G2/S32G3 platforms. The S32G2/S32G3 eDMA architecture features 32 DMA channels. Each of the two eDMA instances is integrated with two DMAMUX blocks. Another particularity of these SoCs is that the interrupts are shared between channels in the following way: - DMA Channels 0-15 share the 'tx-0-15' interrupt - DMA Channels 16-31 share the 'tx-16-31' interrupt - all channels share the 'err' interrupt Signed-off-by: Larisa Grigore <larisa.grigore@oss.nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241219102415.1208328-4-larisa.grigore@oss.nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-24dt-bindings: connector: Add pd-revision propertyAmit Sunil Dhamne
Add pd-revision property definition, to specify the maximum Power Delivery Revision and Version supported by the connector. Signed-off-by: Amit Sunil Dhamne <amitsd@google.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20241210-get_rev_upstream-v2-1-d0094e52d48f@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24dt-bindings: usb: gpio-sbu-mux: Add an entry for FSUSB42Stephan Gerhold
Add a compatible entry for the onsemi FSUSB42 USB switch, which can be used for switching orientation of the SBU lines in USB Type-C applications. Drivers work as-is with the existing fallback compatible. Link to datasheet: https://www.onsemi.com/pdf/datasheet/fsusb42-d.pdf Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241212-x1e80100-qcp-dp-v1-1-37cb362a0dfe@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-23dt-bindings: net: sparx5: document RGMII delaysDaniel Machon
The lan969x switch device supports two RGMII port interfaces that can be configured for MAC level rx and tx delays. Document two new properties {rx,tx}-internal-delay-ps in the bindings, used to select these delays. Tested-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241220-sparx5-lan969x-switch-driver-4-v5-9-fa8ba5dff732@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-23dt-bindings: net: can: atmel: Convert to json schemaCharan Pedumuru
Convert old text based binding to json schema. Changes during conversion: - Add a fallback for `microchip,sam9x60-can` as it is compatible with the CAN IP core on `atmel,at91sam9x5-can`. - Add the required properties `clock` and `clock-names`, which were missing in the original binding. - Update examples and include appropriate file directives to resolve errors identified by `dt_binding_check` and `dtbs_check`. Signed-off-by: Charan Pedumuru <charan.pedumuru@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241120-can-v3-1-da5bb4f6128d@microchip.com [mkl: fixed indention in example] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-12-23dt-bindings: cpufreq: apple,cluster-cpufreq: Add A7-A11, T2 compatiblesNick Chan
Add compatibles for Apple A7-A11, T2 SoCs. Apple A7, A8, A8X gets the per-SoC compatible and the A7 "apple,s5l8960x-cluster-cpufreq" compatible. Apple A9, A9X, A10, A10X, T2, A11 gets the per-SoC compatible, M1 "apple,t8103-cluster-cpufreq" compatible, then the "apple,cluster-cpufreq" fallback compatible. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Nick Chan <towinchenmi@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-12-23dt-bindings: cpufreq: Document support for Airoha EN7581 CPUFreqChristian Marangi
On newer Airoha SoC, CPU Frequency is scaled indirectly with SMC commands to ATF. A virtual clock is exposed. This virtual clock is a get-only clock and is used to expose the current global CPU clock. The frequency info comes by the output of the SMC command that reports the clock in MHz. The SMC sets the CPU clock by providing an index, this is modelled as performance states in a power domain. CPUs can't be individually scaled as the CPU frequency is shared across all CPUs and is global. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-12-23dt-bindings: leds: Add LED1202 LED ControllerVicentiu Galanopulo
The LED1202 is a 12-channel low quiescent current LED driver with: * Supply range from 2.6 V to 5 V * 20 mA current capability per channel * 1.8 V compatible I2C control interface * 8-bit analog dimming individual control * 12-bit local PWM resolution * 8 programmable patterns If the led node is present in the controller then the channel is set to active. Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241218182001.41476-3-vicentiu.galanopulo@remote-tech.co.uk Signed-off-by: Lee Jones <lee@kernel.org>
2024-12-23Merge 6.14-rc4 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-22Merge tag 'devicetree-fixes-for-6.13-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Disable #address-cells/#size-cells warning on coreboot (Chromebooks) platforms - Add missing root #address-cells/#size-cells in default empty DT - Fix uninitialized variable in of_irq_parse_one() - Fix interrupt-map cell length check in of_irq_parse_imap_parent() - Fix refcount handling in __of_get_dma_parent() - Fix error path in of_parse_phandle_with_args_map() - Fix dma-ranges handling with flags cells - Drop explicit fw_devlink handling of 'interrupt-parent' - Fix "compression" typo in fixed-partitions binding - Unify "fsl,liodn" property type definitions * tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add coreboot firmware to excluded default cells list of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one() of/irq: Fix interrupt-map cell length check in of_irq_parse_imap_parent() of: Fix refcount leakage for OF node returned by __of_get_dma_parent() of: Fix error path in of_parse_phandle_with_args_map() dt-bindings: mtd: fixed-partitions: Fix "compression" typo of: Add #address-cells/#size-cells in the device-tree root empty node dt-bindings: Unify "fsl,liodn" type definitions of: address: Preserve the flags portion on 1:1 dma-ranges mapping of/unittest: Add empty dma-ranges address translation tests of: property: fw_devlink: Do not use interrupt-parent directly
2024-12-21dt-bindings: power: supply: Add STC3117 Fuel GaugeHardevsinh Palaniya
The STC3117 provides a simple fuel gauge via I2C. Add a DT schema to describe how to set it up in the device tree. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io> Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io> Link: https://lore.kernel.org/r/20241220084958.32367-2-bhavin.sharma@siliconsignals.io Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-12-20dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatiblesLijuan Gao
Document QCS615 BWMONs, which includes one BWMONv4 instance for CPU to LLCC path bandwidth monitoring and one BWMONv5 instance for LLCC to DDR path bandwidth monitoring. Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241218-add_bwmon_support_for_qcs615-v1-1-680d798a19e5@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-20dt-bindings: iio: dac: ad5791: ldac gpio is active lowAxel Haslam
On the example, the ldac gpio is flagged as active high, when in reality its an active low gpio. Fix the example by using the active low flag for the ldac gpio. Fixes: baaa92d284d5 ("dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios") Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20241106103824.579292-1-ahaslam@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-20Merge tag 'renesas-dts-for-v6.14-tag1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.14 - Add more serial (SCIF), power monitor, ADC, and sound support for the RZ/G3S SoC and the RZ/G3S SMARC SoM and development board, - Add support for the R-Car V4H ES3.0 (R8A779G3) SoC on the White Hawk Single development board, - Add display support for the R-Car V4M SoC and the Gray Hawk Single development board, - Add video capture support for the Gray Hawk Single development board, - Add initial support for the RZ/G3E (R9A09G047) SoC and the RZ/G3E SMARC SoM and Carrier-II EVK development board, - Add support for 5-port MATEnet on the Falcon Ethernet sub-board, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.14-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (33 commits) arm64: dts: renesas: r9a09g047: Add I2C nodes arm64: dts: renesas: rzg3s-smarc: Add sound card arm64: dts: renesas: rzg3s-smarc: Enable SSI3 arm64: dts: renesas: Add da7212 audio codec node arm64: dts: renesas: rzg3s-smarc-som: Add versa3 clock generator node arm64: dts: renesas: r9a08g045: Add SSI nodes arm64: dts: renesas: rzg3s-smarc-som: Enable ADC arm64: dts: renesas: r9a08g045: Add ADC node arm64: dts: renesas: Add initial device tree for RZ/G3E SMARC EVK board arm64: dts: renesas: Add initial support for RZ/G3E SMARC SoM arm64: dts: renesas: r9a09g047: Add OPP table arm64: dts: renesas: Add initial DTSI for RZ/G3E SoC arm64: dts: renesas: falcon-ethernet: Describe PHYs connected on the breakout board arm64: dts: renesas: r8a779a0: Remove address- and size-cells from AVB[1-5] dt-bindings: clock: renesas: Document RZ/G3E SoC CPG dt-bindings: soc: renesas: Document RZ/G3E SMARC SoM and Carrier-II EVK dt-bindings: soc: renesas: Document Renesas RZ/G3E SoC variants arm64: dts: renesas: gray-hawk-single: Add video capture support arm64: dts: renesas: gray-hawk-single: Add DisplayPort support arm64: dts: renesas: r8a779h0: Add display support ... Link: https://lore.kernel.org/r/cover.1734689803.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-12-20Merge tag 'stm32-dt-for-v6.14-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.14, round 1 Highlights: ---------- - MPU: - STM32MP13: - Populate all timer counter nodes in Soc file. - Enable counter (timers) on stm32mp135f-dk. - DH core: increase CPU voltage to fit with STM32MP135F datasheet. - STMP32MP15: - Populate all timer counter nodes in Soc file. - Enable counter (timers) on stm32mp15 EV1 and DK boards. - OCTAVO: - LXA-TAC (gen1/2): disable RTC, update aliases and adjust USB gadget. - Add LXA-TAC gen3 based on OSD32MP153x SIP: STMP32MP153, RAM, PMIC. - DH: minor fixes. - STM32MP25: - Enable imx335/CSI/DCMIPP pipeline on stm32mp257f-ev1. - Add I2S, SAI, SPDIFRX supports. - Add and enable COMBOPHY on stm32mp257f-ev1. Combophy is used by PCIe and USB3. * tag 'stm32-dt-for-v6.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (23 commits) arm64: dts: st: enable imx335/csi/dcmipp pipeline on stm32mp257f-ev1 arm64: dts: st: add csi & dcmipp node in stm32mp25 ARM: dts: stm32: Swap USART3 and UART8 alias on STM32MP15xx DHCOM SoM ARM: dts: stm32: add counter subnodes on stm32mp157 dk boards ARM: dts: stm32: add counter subnodes on stm32mp157c-ev1 ARM: dts: stm32: add counter subnodes on stm32mp135f-dk ARM: dts: stm32: populate all timer counter nodes on stm32mp15 ARM: dts: stm32: populate all timer counter nodes on stm32mp13 ARM: dts: stm32: lxa-tac: Add support for generation 3 devices ARM: dts: stm32: lxa-tac: move adc and gpio{e,g} to gen{1,2} boards dt-bindings: arm: stm32: add compatible strings for Linux Automation LXA TAC gen 3 ARM: dts: stm32: lxa-tac: adjust USB gadget fifo sizes for multi function ARM: dts: stm32: lxa-tac: extend the alias table ARM: dts: stm32: lxa-tac: disable the real time clock ARM: dts: stm32: Fix IPCC EXTI declaration on stm32mp151 ARM: dts: stm32: Sort M24256E write-lockable page in DH STM32MP13xx DHCOR SoM DT ARM: dts: stm32: Increase CPU core voltage on STM32MP13xx DHCOR SoM ARM: dts: stm32: Deduplicate serial aliases and chosen node for STM32MP15xx DHCOM SoM arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board arm64: dts: st: Add combophy node on stm32mp251 ... Link: https://lore.kernel.org/r/7ffcca65-3953-413a-bcf3-0702a6b0518b@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-12-21dt-bindings: sram: sunxi-sram: Add A100 compatibleCody Eksal
The Allwinner A100 has a system configuration block similar to that of the A64 and H6. Add a compatible for it. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest> Link: https://patch.msgid.link/20241218-a100-syscon-v2-1-dae60b9ce192@epochal.quest Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-12-20dt-bindings: display: panel-simple: Document Topland TIAN-G07017-01Ahmad Fatoum
The TIAN-G07017-01 is a 7" TFT-LCD module by TOPLAND ELECTRONICS (H.K). Add its compatible string. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241218-topland-tian-g07017-v1-2-d5e411c199e3@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241218-topland-tian-g07017-v1-2-d5e411c199e3@pengutronix.de
2024-12-20dt-bindings: vendor-prefixes: add prefix for Topland Electronics (H.K)Ahmad Fatoum
Topland is a professional supplier of photoelectric display and touch integrated products from Hong Kong: https://www.topland.com.hk/aboutus/ Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241218-topland-tian-g07017-v1-1-d5e411c199e3@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241218-topland-tian-g07017-v1-1-d5e411c199e3@pengutronix.de
2024-12-20dt-bindings: display: adi,adv7533: Drop single lane supportBiju Das
As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop unsupported 1-lane from bindings. [1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf [2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Cc: stable@vger.kernel.org Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-3-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-20dt-bindings: power: supply: gpio-charger: add support for default charge ↵Dimitri Fedrau
current limit With DT properties charge-current-limit-gpios and charge-current-limit-mapping one can define charge current limits in uA using up to 32 GPIOs. Add property charge-current-limit-default-microamp which selects a default charge current limit that must be listed in charge-current-limit-mapping. This is helpful when the smallest possible charge current limit is 0uA. The driver defaults to the smallest possible value at the moment, which disables charging on probe. With the default its possible to setup a safe charge current limit. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com> Link: https://lore.kernel.org/r/20241218-default-charge-current-limit-v3-1-b26118cf06b5@liebherr.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-12-20Merge tag 'drm-misc-next-2024-12-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for 6.14: UAPI Changes: Cross-subsystem Changes: Core Changes: - connector: Add a mutex to protect ELD access, Add a helper to create a connector in two steps Driver Changes: - amdxdna: Add RyzenAI-npu6 Support, various improvements - rcar-du: Add r8a779h0 Support - rockchip: various improvements - zynqmp: Add DP audio support - bridges: - ti-sn65dsi83: Add ti,lvds-vod-swing optional properties - panels: - new panels: Tianma TM070JDHG34-00, Multi-Inno Technology MI1010Z1T-1CP11 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241219-truthful-demonic-hound-598f63@houat
2024-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc4). No conflicts. Adjacent changes: drivers/net/ethernet/renesas/rswitch.h 32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure") 922b4b955a03 ("net: renesas: rswitch: rework ts tags management") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19dt-bindings: iommu: qcom,iommu: Add MSM8917 IOMMU to SMMUv1 compatiblesBarnabás Czémán
Add MSM8917 compatible string with "qcom,msm-iommu-v1" as fallback for the MSM8917 IOMMU which is compatible with Qualcomm's secure fw "SMMU v1" implementation. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Link: https://lore.kernel.org/r/20241215-msm8917-v9-4-bacaa26f3eef@mainlining.org Signed-off-by: Will Deacon <will@kernel.org>
2024-12-19media: dt-bindings: Add property to describe CSI-2 C-PHY line ordersNiklas Söderlund
Each data lane on a CSI-2 C-PHY bus uses three phase encoding and is constructed from three physical wires. The wires are referred to as A, B and C and their default order is ABC. However to ease hardware design the specification allows for the wires to be switched in any order. Add a vendor neutral property to describe the line order used. The property name 'line-orders', the possible values it can be assigned and there names are taken from the MIPI Discovery and Configuration (DisCo) Specification for Imaging. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-12-19media: dt-bindings: sony,imx290: Add IMX462 to the IMX290 bindingDave Stevenson
IMX462 is the successor to IMX290, which is supportable by the existing IMX290 driver via a new compatible string. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-12-19dt-bindings: drm/bridge: ti-sn65dsi83: Add properties for ti,lvds-vod-swingAndrej Picej
Add properties which can be used to specify LVDS differential output voltage. Since this also depends on near-end signal termination also include property which sets this. LVDS differential output voltage is specified with an array (min, max), which should match the one from connected device. Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241216085410.1968634-2-andrej.picej@norik.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241216085410.1968634-2-andrej.picej@norik.com
2024-12-19dt-bindings: display/xlnx/zynqmp-dpsub: Add audio DMAsTomi Valkeinen
The DP subsystem for ZynqMP supports audio via two channels, and the DP DMA has dma-engines for those channels. For some reason the DT binding has not specified those channels, even if the picture included in xlnx,zynqmp-dpsub.yaml shows "2 x aud" DMAs. This hasn't caused any issues as the drivers have not supported audio, and has thus gone unnoticed. To make it possible to add the audio support to the driver, add the two audio DMAs to the binding. While strictly speaking this is an ABI break, there should be no regressions caused by this as we're adding new entries at the end of the dmas list, and, after the audio support has been added in "arm64: dts: zynqmp: Add DMA for DP audio", the driver will treat the audio DMAs as optional to also support the old bindings. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241023-xilinx-dp-audio-v4-1-5128881457be@ideasonboard.com
2024-12-19Merge tag 'v6.13-rc3' into drm-nextDave Airlie
Backmerge linux 6.13-rc3 as amd next has some dependencies on fixes in it. Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-12-19dt-bindings: power: supply: bq24190: Add BQ24297 compatibleHans de Goede
The BQ24297 is identical to the BQ24296 except that it uses USB D+ / D- data-lines for charger-type (max. input-current) detection instead of a PSEL input pin. This is the same difference as between the already supported BQ24190 (D+ / D-) and the BQ24192 (PSEL). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20241116203648.169100-1-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-12-18dt-bindings: PCI: xilinx-cpm: Add compatible string for CPM5 host1Thippeswamy Havalige
The Xilinx Versal premium series has CPM5 block which supports two typeA Root Port controller functionality at Gen5 speed. Add compatible string to distinguish between two CPM5 rootport controller1. since Legacy and error interrupt register and bits for both the controllers are at different offsets. Link: https://lore.kernel.org/r/20240922061318.2653503-2-thippesw@amd.com Signed-off-by: Thippeswamy Havalige <thippesw@amd.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
2024-12-18dt-bindings: interrupt-controller: arm,gic: Correct VGIC interrupt descriptionKrzysztof Kozlowski
The description of VGIC interrupt referenced obsolete "see below" after converting TXT to DT Schema in commit 66ed144f147a ("dt-bindings: interrupt-controller: Convert ARM GIC to json-schema"), because there is no dedicated "VGIC" chapter anymore below. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Marc Zyngier <maz@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241217061226.14139-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-12-18dt-bindings: hwmon: intel,crps185: Add to trivialNinad Palsule
Add INTEL Common Redundant Power Supply Versions crps185 bindings as trivial. The hardware does not have any resources like clocks which are required to be included in the device tree. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://lore.kernel.org/r/20241217173537.192331-4-ninad@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-12-18dt-bindings: hwmon: lm75: Add NXP P3T1755Wolfram Sang
Add this LM75 compatible sensor which needs a separate entry because of its default sampling time and SMBusAlert handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241218074131.4351-6-wsa+renesas@sang-engineering.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-12-18dt-bindings: mmc: mtk-sd: Document compatibles that need two register rangesChen-Yu Tsai
Besides the MT8183's MMC controller and all its compatible derivatives, the recently added MT7986 and MT8196 also require two register ranges. This is based on the actual device trees. Properly enforce this in the binding. Fixes: 4a8bd2b07d88 ("dt-bindings: mmc: mtk-sd: Add mt7988 SoC") Fixes: 58927c9dc4ab ("dt-bindings: mmc: mtk-sd: Add support for MT8196") Cc: Frank Wunderlich <frank-w@public-files.de> Cc: Andy-ld Lu <andy-ld.lu@mediatek.com> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20241210073212.3917912-2-wenst@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-12-18dt-bindings: display: simple: Document Multi-Inno Technology MI1010Z1T-1CP11 ↵Marek Vasut
panel Add Multi-Inno Technology MI1010Z1T-1CP11 10.1" 1024x600 LVDS panel compatible string. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241212122701.25305-1-marex@denx.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241212122701.25305-1-marex@denx.de
2024-12-18dt-bindings: display: simple: Add Tianma TM070JDHG34-00 panelLuca Ceresoli
Add the Tianma Micro-electronics TM070JDHG34-00 7.0" LVDS LCD TFT panel. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241216-tianma_tm070jdhg34-v2-1-0b319a0bac39@bootlin.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241216-tianma_tm070jdhg34-v2-1-0b319a0bac39@bootlin.com
2024-12-18dt-bindings: pwm: marvell,berlin-pwm: Convert from txt to yamlUwe Kleine-König
Formalize the binding for marvell,berlin-pwm devices and make them automatically checkable. No change to the binding intended. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241029160837.590199-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-12-18dt-bindings: pwm: sprd,ums512-pwm: convert to YAMLStanislav Jakubek
Convert the Spreadtrum/Unisoc UMS512 PWM controller bindings to DT schema. Adjust filename to match compatible. Drop assigned-* properties as these should not be needed. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com> Acked-by: Baolin Wang <baolin.wang@linux.alibaba.com> Link: https://lore.kernel.org/r/ZyH-JASRcpMXYsmH@standask-GA-A55M-S2HP [Replaced Baolin Wang's email address in maintainers list] Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-12-17dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906Sam Edwards
This is a series (EX3510-B0 and EX3510-B1) of residential gateways based on BCM4906, a stripped-down version of the BCM4908 SoC. Although Zyxel's marketing materials call this a "series," the EX3510-B1 appears to be a very minor revision of the EX3510-B0, with only changes that are transparent to software. As far as Linux is concerned, this "series" effectively represents a single model. Signed-off-by: Sam Edwards <CFSworks@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241009215454.1449508-2-CFSworks@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-12-17dt-bindings: arm: bcmbca: Add Genexis XG6846BLinus Walleij
This adds the device tree bindings for the Genexis XG6846B router/gateway/broadband modem. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241019-genexis-xg6846b-base-v3-8-8375a0e1f89f@linaro.org Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-12-17dt-bindings: vendor-prefixes: Add GenexisLinus Walleij
Genexis is Swedish/Dutch company producing broadband access equipment. Link: https://genexis.eu/ Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241019-genexis-xg6846b-base-v3-7-8375a0e1f89f@linaro.org Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-12-17spi: dt-bindings: Document CS active-highIker Pedrosa
The current documentation does not clearly explain how to invert the SPI CS signal to make it active-high. This makes it very difficult to understand. This patch adds a simple explanation on how to set the CS line in active-high and adds an example to make it easier for users who need that setup for their SPI peripherals. Link: https://forums.raspberrypi.com/viewtopic.php?t=378222 Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20241216095739.27320-1-ikerpedrosam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-17dt-bindings: interrupt-controller: update imsic reg address to 0x24000000 in ↵Huang Borong
Example 1 Change the 'reg' property address from 0x28000000 to 0x24000000 to match the node label interrupt-controller@24000000. Signed-off-by: Huang Borong <huangborong@bosc.ac.cn> Link: https://lore.kernel.org/r/20241213090924.181249-1-huangborong@bosc.ac.cn Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-12-17dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5424Manikanta Mylavarapu
Document the qcom,tcsr-ipq5424 compatible. Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> Link: https://lore.kernel.org/r/20241204141416.1352545-2-quic_mmanikan@quicinc.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-12-17dt-bindings: mfd: bd71815: Fix rsense and typosMatti Vaittinen
The sense resistor used for measuring currents is typically some tens of milli Ohms. It has accidentally been documented to be tens of mega Ohms. Fix the size of this resistor and a few copy-paste errors while at it. Drop the unsuitable 'rohm,charger-sense-resistor-ohms' property (which can't represent resistors smaller than one Ohm), and introduce a new 'rohm,charger-sense-resistor-micro-ohms' property with appropriate minimum, maximum and default values instead. Fixes: 4238dc1e6490 ("dt_bindings: mfd: Add ROHM BD71815 PMIC") Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/0efd8e9de0ae8d62ee4c6b78cc565b04007a245d.1731430700.git.mazziesaccount@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-12-17dt-bindings: mfd: Add binding for qnap,ts433-mcu devicesHeiko Stuebner
These MCUs can be found in network attached storage devices made by QNAP. They are connected to a serial port of the host device and provide functionality like LEDs, power-control and temperature monitoring. LEDs, buttons, etc are all elements of the MCU firmware itself, so don't need devicetree input, though the fan gets its cooling settings from a fan-0 subnode. A binding for the LEDs for setting the linux-default-trigger may come later, once all the LEDs are understood and ATA controllers actually can address individual port-LEDs, but are really optional. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241107114712.538976-4-heiko@sntech.de Signed-off-by: Lee Jones <lee@kernel.org>
2024-12-17dt-bindings: display: bridge: renesas,dsi-csi2-tx: Add r8a779h0Tomi Valkeinen
Extend the Renesas DSI display bindings to support the r8a779h0 V4M. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-5-e77421093c05@ideasonboard.com
2024-12-17dt-bindings: display: renesas,du: Add r8a779h0Tomi Valkeinen
Extend the Renesas DU display bindings to support the r8a779h0 V4M. Note that we remove the requirement for two ports from the global part of the bindings, as each conditional part defines the number of required ports already. This came up with r8a779h0 as it's the first one that has only one port. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-4-e77421093c05@ideasonboard.com
2024-12-17dt-bindings: display: renesas,du: Add missing constraintsTomi Valkeinen
The binding is missing maxItems for all renesas,cmms and renesas,vsps properties. As the amount of cmms or vsps is always a fixed amount, set the maxItems to match the minItems. Also add the minItems and maxItems to the top level properties. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-3-e77421093c05@ideasonboard.com
2024-12-17dt-bindings: interconnect: add interconnect bindings for SM8750Raviteja Laggyshetty
Add interconnect device bindings. These devices can be used to describe any RPMh and NoC based interconnect devices. Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241204-sm8750_master_interconnects-v3-1-3d9aad4200e9@quicinc.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-23 06:26:13 +0000