summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)Author
2026-06-01dt-bindings: net: starfive,jh7110-dwmac: Remove jh8100Minda Chen
Remove jh8100 dt-bindings because do not support it now. StarFive have stopped jh8100 developing and will not release it outside. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260527084108.121416-2-minda.chen@starfivetech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-01dt-bindings: arm: apple: Add M3 based devicesJanne Grunau
The Apple devices with the t8122 SoC (M3) are very similar to their M1 and M2 predecessors. Only the 13-inch Macbook Pro is replaced by a 14-inch version based on the design of the 14-inch Macbook Pro with (M1/M2 Pro/Max). The Mac mini was not offered with M3. Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Janne Grunau <j@jannau.net> Link: https://patch.msgid.link/20260507-apple-m3-initial-devicetrees-v3-4-ca07c81b5dc7@jannau.net Signed-off-by: Sven Peter <sven@kernel.org>
2026-06-01dt-bindings: pwm: apple,s5l-fpwm: Add t8122 compatibleJanne Grunau
The PWM controller on the Apple silicon t8122 (M3) SoC is compatible with the existing driver. Add "apple,t8122-fpwm" as SoC specific compatible under "apple,s5l-fpwm" used by the driver. Acked-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Uwe Kleine-König <ukleinek@kernel.org> Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Janne Grunau <j@jannau.net> Link: https://patch.msgid.link/20260507-apple-m3-initial-devicetrees-v3-3-ca07c81b5dc7@jannau.net Signed-off-by: Sven Peter <sven@kernel.org>
2026-06-01dt-bindings: power: apple,pmgr-pwrstate: Add t8122 compatibleJanne Grunau
The device power state management of the PMGR blocks on Apple's t8122 SoC (M3) is compatible with the existing driver. Add "apple,t8122-pmgr-pwrstate" as SoC specific compatible under the existing "apple,t8103-pmgr-pwrstate" used by the driver. Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Janne Grunau <j@jannau.net> Link: https://patch.msgid.link/20260507-apple-m3-initial-devicetrees-v3-1-ca07c81b5dc7@jannau.net Signed-off-by: Sven Peter <sven@kernel.org>
2026-06-01dt-bindings: arm: apple: apple,pmgr: Add t8122 compatibleJanne Grunau
The PMGR blocks on Apple silicon M3 SoCs (t8122) are compatible with the M1 and M2 predecessors. Add "apple,t8122-pmgr" as M3 specific compatible. Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Janne Grunau <j@jannau.net> Link: https://patch.msgid.link/20260505-apple-m3-initial-devicetrees-v2-1-b0c2f3519e0e@jannau.net Signed-off-by: Sven Peter <sven@kernel.org>
2026-06-01Merge tag 'v7.1-rc6' into tty-nextGreg Kroah-Hartman
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-06-01Merge tag 'v7.1-rc6' into usb-nextGreg Kroah-Hartman
We need the USB and Thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-06-01ASoC: spacemit: add K3 SoC supportMark Brown
Troy Mitchell <troy.mitchell@linux.spacemit.com> says: This series adds K3 SoC support for the SpacemiT I2S controller driver. Patch 1 adds the dt-bindings for the spacemit,k3-i2s compatible. The K3 SoC uses the same I2S IP as K1 but requires additional clocks (sysclk_div, c_sysclk, c_bclk) that are shared across multiple I2S controllers. Patch 2 adds driver support for K3 SoC with additional clocks. Link: https://patch.msgid.link/20260522-k3-i2s-v3-0-08e3eb811d93@linux.spacemit.com
2026-06-01ASoC: dt-bindings: add SpacemiT K3 SoC compatibleTroy Mitchell
Add the spacemit,k3-i2s compatible string for the K3 SoC I2S controller. The K3 I2S IP is the same as K1 but requires additional clocks: a dedicated sysclk_div clock, along with common_sysclk and common_bclk which are shared across multiple I2S controllers on K3. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com> Link: https://patch.msgid.link/20260522-k3-i2s-v3-1-08e3eb811d93@linux.spacemit.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-06-01dt-bindings: watchdog: Convert TS-4800 to DT schemaEduard Bostina
Convert the Technologic Systems TS-4800 watchdog timer bindings to DT schema. Signed-off-by: Eduard Bostina <egbostina@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-06-01ASoC: rsnd: Add RZ/G3E audio driver supportMark Brown
John Madieu <john.madieu.xa@bp.renesas.com> says: Add audio support for the Renesas RZ/G3E SoC to the R-Car Sound driver. The RZ/G3E audio subsystem is based on R-Car Sound IP but has several differences requiring dedicated handling: - SSI operates exclusively in BUSIF mode (no PIO) - 2-4 BUSIF channels per SSI (layout differs from R-Car) - Separate register regions for SCU, ADG, SSIU, SSI accessed by name - Per-SSI ADG and SSIF supply clocks - Dedicated audmapp clock/reset for Audio DMAC peri-peri - Per-SSI and per-module reset controllers via CPG - Unprefixed DT sub-node names (ssi, ssiu, src, ...) instead of rcar_sound,xxx - Hyphenated indexed clock/reset names (ssi-0, src-0, adg-ssi-0, audio-clka, ...) instead of the legacy dotted form Link: https://patch.msgid.link/20260525110230.4014435-1-john.madieu.xa@bp.renesas.com
2026-06-01ASoC: dt-bindings: sound: Add DT binding for RZ/G3E soundJohn Madieu
Add a standalone device tree binding for the Renesas RZ/G3E (R9A09G047) sound controller. The RZ/G3E sound IP is based on R-Car Sound but differs in several ways: - Uses unprefixed sub-node names (ssi, ssiu, src, dvc, mix, ctu) instead of R-Car's rcar_sound,xxx prefixed names. - Supports up to 5 DMA controllers per direction, allowing multiple DMA entries with repeated channel names in SSIU, SRC and DVC sub-nodes. - Has 47 clocks including per-SSI ADG clocks (adg-ssi-[0-9]), SCU clocks (scu, scu_x2, scu_supply), SSIF supply clock, AUDMAC peri-peri clock, and ADG clock. - Has 14 reset lines including SCU, ADG and AUDMAC peri-peri resets. - SSI operates exclusively in BUSIF mode. These differences make the RZ/G3E binding incompatible with the existing renesas,rsnd.yaml, so it is added as a separate standalone binding with its own $ref to dai-common.yaml. Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/20260525110230.4014435-2-john.madieu.xa@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-06-01ASoC: nau8822: add support for supply regulatorsMark Brown
Alexey Charkov <alchark@flipper.net> says: The Nuvoton NAU8822 codec has four power supply pins: VDDA, VDDB, VDDC and VDDSPK, which must be online and stable before the device can be accessed over I2C. On boards where these rails are software-controlled, probing the codec before the regulators are up results in -ENXIO errors during register access. This short series adds optional regulator support to both the device tree binding and the driver, so platforms that need explicit power sequencing can describe and enforce it: Link: https://patch.msgid.link/20260525-nau8822-reg-v2-0-7d37ae393e46@flipper.net
2026-06-01ASoC: dt-bindings: nau8822: Add supply regulatorsAlexey Charkov
NAU8822 has 4 power supply pins: VDDA, VDDB, VDDC and VDDSPK, which need to be online and stable before communication with the device is attempted. List them (as optional) so that device tree users can ensure correct power sequencing. Signed-off-by: Alexey Charkov <alchark@flipper.net> Link: https://patch.msgid.link/20260525-nau8822-reg-v2-1-7d37ae393e46@flipper.net Signed-off-by: Mark Brown <broonie@kernel.org>
2026-06-01spi: fsl-lpspi: fix DMA termination issuesMark Brown
Carlos Song (OSS) <carlos.song@oss.nxp.com> says: This series fixes two issues in the fsl-lpspi DMA transfer error paths. Patch 1 replaces the deprecated dmaengine_terminate_all() with dmaengine_terminate_sync() across all error paths in fsl_lpspi_dma_transfer(). Patch 2 fixes a missing RX DMA channel termination when TX descriptor preparation fails. Since the RX channel is already submitted and issued before the TX descriptor is prepared, returning -EINVAL without terminating the RX channel leaves it running against buffers that the SPI core will unmap, potentially causing memory corruption. Link: https://patch.msgid.link/20260525062357.3191349-1-carlos.song@oss.nxp.com
2026-06-01dt-bindings: iio: light: veml6030: add veml3328Joshua Crofts
The Vishay VEML3328 is an RGBCIR light sensor that shares similar devicetree properties as other existing VEMLxxxx sensors in the kernel. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31Merge tag 'v7.1-rc6' into nextDmitry Torokhov
Sync up with mainline to pull in a fix to IMS PCU driver and other enhancements.
2026-05-31dt-bindings: trivial-devices: add fsl,mc1323Frank Li
Add freescale 2.4 GHz IEEE® 802.15.4/ZigBee mc1323 to fix the below CHECK_DTBS warnings. arch/arm/boot/dts/nxp/imx/imx53-smd.dtb: /soc/bus@50000000/spba-bus@50000000/spi@50010000/mc1323@0: failed to match any schema with compatible: ['fsl,mc1323'] Since the i.MX53 platform is more than 20 years old, it is difficult to find detailed information about how the MC1323 was used on the i.MX53 SMD board, as the functionality depended on firmware. Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260522203810.832631-1-Frank.Li@oss.nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2026-05-31dt-bindings: display: imx: Add television encoder (TVE) for imx53Frank Li
Add television encoder (TVE) for legacy i.MX53 (over 15 years) to fix below DTB_CHECK warnings: arch/arm/boot/dts/nxp/imx/imx53-ard.dtb: /soc/bus@60000000/tve@63ff0000: failed to match any schema with compatible: ['fsl,imx53-tve'] Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260521193734.1496372-1-Frank.Li@oss.nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2026-05-31dt-bindings: iio: adc: add AD4691 familyRadu Sabau
Add DT bindings for the Analog Devices AD4691 family of multichannel SAR ADCs (AD4691, AD4692, AD4693, AD4694). The four variants are not compatible with each other: AD4691/AD4692 have 16 analog input channels while AD4693/AD4694 have 8, and AD4691/AD4693 top out at 500 kSPS while AD4692/AD4694 reach 1 MSPS. These differences in channel count and maximum sample rate require distinct compatible strings so the driver can select the correct channel configuration and rate limits. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Radu Sabau <radu.sabau@analog.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31dt-bindings: iio: adc: ad4080: add AD4884 supportAntoniu Miclaus
Add AD4884 compatible string to the AD4080 devicetree binding. The AD4884 is a dual-channel, 16-bit, 40 MSPS SAR ADC, sharing the same register map and interface as the AD4080 family. Like the AD4880, it requires two SPI chip selects and two io-backends for its independent ADC channels. The AD4884 differs from the AD4880 in resolution (16-bit vs 20-bit), which requires distinct channel configuration in the driver, precluding a fallback compatible. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31dt-bindings: iio: temperature: Add ADT7604 support to adi,ltc2983Liviu Stan
The ADT7604 shares the same die as the LTC2984. It repurposes the custom RTD sensor type (18) as a copper trace resistance sensor and the custom thermistor type (27) as a leak detector, and removes thermocouple, diode and direct ADC sensor types. Add adi,adt7604 to the compatible list and introduce two new sensor node types specific to this device: - copper-trace@: maps to the custom RTD sensor type (18). Two variants: sub-ohm (< 1 ohm, adi,copper-trace-sub-ohm boolean, no custom table and excitation current) and standard (> 1 ohm, required adi,custom-copper-trace table, optional excitation current defaulting to the datasheet recommended value). Primary output is resistance in ohms. For > 1 ohm copper traces with a custom table, the chip also outputs temperature in millidegrees Celsius. - leak-detector@: maps to the custom thermistor sensor type (27). Takes a required adi,custom-leak-detector lookup table encoding resistance (uOhm) against coverage data (%). Two outputs: resistance in ohms and coverage in percent. Separate node types are used rather than extending the existing rtd@ and thermistor@ nodes because adi,custom-rtd is required for sensor type 18, and several properties (adi,number-of-wires, adi,rtd-curve, adi,rsense-share, adi,single-ended, adi,current-rotate) have no meaning for the new sensor types, since the configuration is hardcoded, and would need to be explicitly forbidden or ignored in the driver. allOf conditions are added to restrict thermocouple, diode, direct ADC and active temperature nodes to non-ADT7604 devices, and to restrict copper-trace and leak-detector nodes to the ADT7604 (some parts only). Signed-off-by: Liviu Stan <liviu.stan@analog.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31dt-bindings: iio: light: add Broadcom APDS9999Jose A. Perez de Azpillaga
Add Device Tree binding for the Broadcom APDS9999 ambient light and proximity sensor. A separate binding file is used rather than merging with avago,apds9300.yaml because the APDS9999 has an additional vcsel-supply for the VCSEL. The APDS9999 features individual R, G, B, and IR channels with a green channel that uses optical coating to approximate the human eye spectral response for ALS/lux measurements. Calibrated RGB color sensing is not yet implemented in the driver. Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31dt-bindings: iio: adc: Add GPADC for Allwinner A523Michal Piekos
Add support for the GPADC for the Allwinner A523. It differs from the D1/T113s/R329/T507 by having two clocks. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31dt-bindings: iio: magnetometer: add MEMSIC MMC5983MAVladislav Kulikov
Add a Devicetree binding for the MEMSIC MMC5983MA 3-axis magnetometer. MMC5983MA is not register-compatible with the existing MEMSIC magnetometer drivers. It has a different register map, 18-bit output data format, and I2C/SPI transport support. Reviewed-by: David Lechner <dlechner@baylibre.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Vladislav Kulikov <vlad.kulikov.c@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31dt-bindings: iio: chemical: sensirion,scd30: Update maintainers fieldMaxwell Doose
Tomasz Duszynski is no longer the maintainer of the SCD30 driver. Replace his entry with mine. Link: https://lore.kernel.org/linux-iio/20260507172404.80435-1-m32285159@gmail.com/ Signed-off-by: Maxwell Doose <m32285159@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31dt-bindings: iio: adc: hx711: clean up existing binding textPiyush Patle
Rewrite the binding description and property text so it describes the existing HX711 hardware behavior directly instead of documenting old driver implementation details. Also clarify that clock-frequency controls the SCK bit-bang timing. No functional change. Signed-off-by: Piyush Patle <piyushpatle228@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31dt-bindings: iio: adc: qcom,pm8018-adc: add label property for ADC channelsAntony Kurniawan Soemardi
Add a new optional label property for ADC channels to help users identify each channel when reading values from the sysfs interface. Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com> Reviewed-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31dt-bindings: iio: dac: Add ADI AD5706RAlexis Czezar Torreno
Add device tree binding documentation for the Analog Devices AD5706R 4-channel 16-bit current output digital-to-analog converter. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31dt-bindings: iio: adc: ad4080: add AD4880 supportAntoniu Miclaus
Add support for the AD4880, a dual-channel 20-bit 40MSPS SAR ADC with integrated fully differential amplifiers (FDA). The AD4880 has two independent ADC channels, each with its own SPI configuration interface. This requires: - Two entries in reg property for primary and secondary channel chip selects - Two io-backends entries for the two data channels Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31dt-bindings: iio: gyroscope: add mount-matrix for bmg160Vishwas Rajashekar
The mount-matrix property supplies a 3x3 matrix that is used to transform the values from the gyroscope to get vector values that are relative to the way the sensor has been mounted on the device. When the property is not specified, the identity matrix is used. This change adds mount-matrix as an optional property to the dt-bindings for the bmg160 gyroscope. Signed-off-by: Vishwas Rajashekar <vishwas.dev@vrajashkr.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2026-05-31Merge tag 'renesas-r8a78000-dt-binding-defs-tag1' into renesas-dts-for-v7.2Geert Uytterhoeven
Renesas R-Car X5H MFIS DT Binding Definitions DT bindings and binding definitions for the Renesas R-Car X5H (R8A78000) Multifunctional Interface (MFIS), shared by driver and DT source files.
2026-05-31dt-bindings: soc: renesas: Document R-Car R8A779MD GeistMarek Vasut
Document the compatible value for the Renesas R-Car M3Le (R8A779MD) SoC and the Renesas Geist development board. The Renesas M3Le SoC is a register-compatible variant of the R8A77965 (M3-N) with reduced set of peripherals. The Geist board is derived from Renesas Salvator-X/XS boards, with adjustment for the R8A779MD SoC. Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Link: https://patch.msgid.link/20260504144534.43745-5-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-05-31dt-bindings: clock: cirrus,cs2000-cp: Document CS2500Marek Vasut
Document backward compatibility support for the CS2500 chip, which is a drop-in replacement for the CS2000 chip. Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20260504144534.43745-4-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-05-30Merge tag 'usb-7.1-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt fixes from Greg KH: "Here is a set of USB fixes and new device ids for 7.1-rc6. Nothing major in here, just lots of tiny fixes for reported issues found by users and some older patches found by some scanning tools. Included in here are: - typec fixes found by fuzzers that have decided to finally look at that device interaction path (i.e. before a driver is bound to a device) - typec fixes for issues found by users - thunderbolt driver fixes for reported problems - cdns3 driver fixes - dwc3 driver fixes - new device quirks added - usb serial driver fixes for broken devices - other small driver fixes All of these have been in linux-next for over a week with no reported issues" * tag 'usb-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (54 commits) USB: serial: cypress_m8: validate interrupt packet headers USB: serial: safe_serial: fix memory corruption with small endpoint USB: serial: omninet: fix memory corruption with small endpoint USB: serial: mxuport: fix memory corruption with small endpoint USB: serial: cypress_m8: fix memory corruption with small endpoint USB: cdc-acm: Fix bit overlap and move quirk definitions to header usb: dwc2: Fix use after free in debug code usb: chipidea: core: convert ci_role_switch to local variable usb: gadget: f_fs: serialize DMABUF cancel against request completion usb: gadget: f_fs: copy only received bytes on short ep0 read usb: gadget: dummy_hcd: Reject hub port requests for non-existent ports dt-bindings: usb: Fix EIC7700 USB reset's issue usbip: vudc: Fix use after free bug in vudc_remove due to race condition dt-bindings: usb: ti,omap4-musb: Drop duplicate 'usb-phy' property constraints usb: storage: Add quirks for PNY Elite Portable SSD USB: quirks: add NO_LPM for Lenovo ThinkPad USB-C Dock Gen2 hub controllers usb: usbtmc: reject interrupt endpoints with small wMaxPacketSize usb: usbtmc: check URB actual_length for interrupt-IN notifications xhci: tegra: Fix ghost USB device on dual-role port unplug usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind ...
2026-05-30media: dt-bindings: Document SC8280XP/SM8350 IrisDmitry Baryshkov
The Iris block on SM8350 and SC8280XP is compatible with the Iris (Venus) on SM8250. Describing in the bindings that the block is Iris v2 and not Venus. Document SM8350 and SC8280XP IP cores, using qcom,sm8250-venus as a fallback compatible. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
2026-05-30media: dt-bindings: qcom,sm8550-iris: Add X1P42100 compatibleWangao Wang
Document the new compatible string "qcom,x1p42100-iris". Unlike SM8550 where the BSE (Bitstream Engine) is clocked implicitly via vcodec0_core, x1p42100 exposes a dedicated BSE clock vcodec0_bse that requires explicit enable/disable and frequency configuration. The SM8550 driver has no knowledge of this clock and therefore cannot operate x1p42100 hardware correctly. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com> Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
2026-05-30media: dt-bindings: venus: Add qcom,msm8939 schemaAndré Apitzsch
Add a schema description for the Venus video decoder/encoder IP in MSM8939. Signed-off-by: André Apitzsch <git@apitzsch.eu> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com> Reviewed-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
2026-05-30media: dt-bindings: qcom,qcm2290-venus: add Venus on SM6115Dmitry Baryshkov
The Qualcomm SM6115 platform contains the AR50_Lite core similar to the one found on the QCM2290. Define new platform-specific compatible, while using QCM2290 as a fallback. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> [bod: Fixed indentation of compats] Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
2026-05-29dt-bindings: Input: Add Wacom W9000-series penabled touchscreensHendrik Noack
Add bindings for Wacom W9002 and two Wacom W9007 variants which can be found in tablets. W9002, W9007A LT03, and W9007A V1 differ in the length of the return message containing coordinates, distance, pressure and button status. Co-developed-by: Ferass El Hafidi <funderscore@postmarketos.org> Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org> Signed-off-by: Hendrik Noack <hendrik-noack@gmx.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20260528074818.12151-2-hendrik-noack@gmx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-05-30Merge tag 'qcom-drivers-for-7.2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v7.2 Enable QSEECOM and with that access to UEFI variables on the Surface Pro 12in laptop. Refactor the Geni Serial-Engine helper code to allow the serial engine drivers (such as I2C) to operate on targets where power and performance is controlled through an SCMI server instead of individual resources in Linux. Extend the LLCC driver to support reading its data from a System Cache Table (SCT) in memory instead of being hard coded per platform in the driver. Also add support for the Eliza platform. Add support for the Hawi platform to pd-mapper. Switch the SMEM driver to track partitions using xarray to handle the ever growing number of hosts better. Extend the socinfo driver with knowledge about the Nord, SM7750, IPQ9650, and Shikra SoCs, as well as PMAU0102, PMC1020H, PMIV0102, and PMIV0104 PMICs. Define UBWC 3.1 and add a couple of convenient helpers in the UBWC library for MDSS and Adreno. Fix a memory leak in the WCNSS firmware download mechanism. * tag 'qcom-drivers-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits) soc: qcom: geni-se: Introduce helper APIs for performance control soc: qcom: geni-se: Introduce helper API for attaching power domains soc: qcom: geni-se: Add resources activation/deactivation helpers soc: qcom: geni-se: Handle core clk in geni_se_clks_off() and geni_se_clks_on() soc: qcom: geni-se: Introduce helper API for resource initialization soc: qcom: geni-se: Add geni_icc_set_bw_ab() function soc: qcom: geni-se: Refactor geni_icc_get() and make qup-memory ICC path optional soc: qcom: llcc-qcom: Fix NULL vs IS_ERR() bug in qcom_llcc_get_fw_config() soc: qcom: llcc-qcom: Add support for Eliza dt-bindings: cache: qcom,llcc: Document Eliza LLCC block soc: qcom: ubwc: add helper controlling AMSBC enablement soc: qcom: ubwc: define helper for MDSS and Adreno drivers soc: qcom: ubwc: define UBWC 3.1 soc: qcom: socinfo: Add SoC ID for Nord SA8797P dt-bindings: arm: qcom,ids: Add SoC ID for Nord SA8797P soc: qcom: socinfo: Add SoC ID for SM7750 dt-bindings: arm: qcom,ids: Add SoC ID for SM7750 soc: qcom: socinfo: Add PMIC PMAU0102 soc: qcom: socinfo: Add PMIV0102 & PMIV0104 PMICs firmware: qcom: scm: Allow QSEECOM on Surface Pro 12in ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-05-29dt-bindings: pinctl: amlogic,pinctrl-a4: Add compatible string for A9Xianwei Zhao
Update dt-binding document for pinctrl of Amlogic A9. In Amlogic A9 SoC, a bank mux register reuse other banks. The multiplexed part requires special processing and is therefore incompatible with the previous SoCs. Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-05-29dt-bindings: remoteproc: xlnx: Add firmware-name propertyTanmay Shah
The firmware-name property indicates which firmware to load on RPU during the Linux boot time. It is possible to stop the RPU after boot and load different firmware and start RPU. Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20260527051611.194844-2-tanmay.shah@amd.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2026-05-29dt-bindings: display/msm/gpu: Document Adreno 810 GPUAlexander Koskovich
Document the GPU compatible string used for the Adreno 810. Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Signed-off-by: Alexander Koskovich <akoskovich@pm.me> Patchwork: https://patchwork.freedesktop.org/patch/728804/ Message-ID: <20260528-adreno-810-v7-2-7fe7fdd97fc2@pm.me> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2026-05-29dt-bindings: display/msm/gmu: Document Adreno 810 GMUAlexander Koskovich
Document Adreno 810 GMU in the dt-binding specification. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Signed-off-by: Alexander Koskovich <akoskovich@pm.me> Patchwork: https://patchwork.freedesktop.org/patch/728802/ Message-ID: <20260528-adreno-810-v7-1-7fe7fdd97fc2@pm.me> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2026-05-29dt-bindings: display/msm: gpu: Document Adreno X2-185Akhil P Oommen
Adreno X2-185 GPU found in Glymur chipsets belongs to the A8x family. It features a new slice architecture with 4 slices, significantly higher bandwidth throughput compared to mobile counterparts, raytracing support, and the highest GPU Fmax seen so far on an Adreno GPU (1850 Mhz), among other improvements. Update the dt bindings documentation to describe this GPU. Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/727119/ Message-ID: <20260522-glymur-gpu-dt-v5-2-562c406b210c@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2026-05-29dt-bindings: vendor-prefixes: Add RiverdiVitor Soares
Add vendor prefix for Riverdi Sp. z o.o, a design and manufacturer of TFT display solutions. Link: https://riverdi.com Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Vitor Soares <vitor.soares@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20260522161105.277519-16-ivitro@gmail.com
2026-05-29dt-bindings: mmc: sdhci-msm: Rename the binding to include 'qcom' prefixManivannan Sadhasivam
This is the only Qcom binding that doesn't have 'qcom' prefix in the bindings name. This doesn't match with the regex in MAINTAINERS file and the 'get_maintainer.pl' script fails to list the 'linux-arm-msm' list: Ulf Hansson <ulfh@kernel.org> (maintainer:MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND...) Rob Herring <robh@kernel.org> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) Krzysztof Kozlowski <krzk+dt@kernel.org> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) Conor Dooley <conor+dt@kernel.org> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) Bjorn Andersson <andersson@kernel.org> (in file) Konrad Dybcio <konradybcio@kernel.org> (in file) linux-mmc@vger.kernel.org (open list:MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND...) devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) linux-kernel@vger.kernel.org (open list) Hence, rename the binding to include 'qcom' prefix so that the regex matches correctly. Reported-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Closes: https://lore.kernel.org/all/20260526151003.p4kn2vek3hpv4gzv@hu-mojha-hyd.qualcomm.com Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Ulf Hansson <ulfh@kernel.org>
2026-05-29dt-bindings: soc: renesas: mfis: Add R-Car V4H/V4M supportWolfram Sang
The above SoCs have only 12 mailboxes and do not have an extra register space for mailboxes. Everything is contained in the common register set. In addition to adding these SoCs, the other entries get updated to enforce 2 register spaces and their specific number of interrupts. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20260519075620.4128-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-05-29dt-bindings: mmc: sdhci-msm: qcom: Add Hawi compatibleNitin Rawat
Document the compatible string for the SDHCI controller on the Qualcomm Hawi platform. Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com> Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Ulf Hansson <ulfh@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-01 04:20:52 +0000