| Age | Commit message (Collapse) | Author |
|---|
|
Expand 'none' recovery method for wedged event to include debug cases
where driver wants to hint "no recovery" without resetting the device
from driver context.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260305130720.3685754-2-raag.jadav@intel.com
|
|
Document the SCM Firmware Interface on the Eliza SoC.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-bindings-scm-v2-1-b2d2e69068e3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Fix IOMMU DT propety for venus via dropping SMMU stream IDs which
relates to secure context bank. Assigning Linux kernel (HLOS) VMID
to secure context bank stream IDs is incorrect. The maximum value
for iommus property is updated accordingly.
These DT bindings changes should be backwards compatible.
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260122121042.579270-3-sumit.garg@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Fix IOMMU DT propety for display via dropping SMMU stream IDs which
relates to secure context bank. Assigning Linux kernel (HLOS) VMID
to secure context bank stream IDs is incorrect. The maximum value
for iommus property is updated accordingly.
These DT bindings changes should be backwards compatible.
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260122121042.579270-2-sumit.garg@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Chen-Yu Tsai <wenst@chromium.org> says:
This series is part of a broader collection of regulator related
cleanups for MediaTek Chromebooks. This one covers the regulators
exposed by the ChromeOS Embedded Controller.
Patch 1 adds the names of the power supply inputs to the binding.
Patch 2 adds the supply names from the DT binding change in patch 1
to the regulator descriptions in the driver. This patch has a
checkpatch.pl warnings, but I wonder if it's because the context size
for checking complex macros is not large enough.
Device tree changes will be sent separately. The goal is to get the
regulator tree as complete as possible. This includes adding supply
names to other regulator DT bindings, and adding all the supply links
to the existing DTs.
|
|
Even a regulator remotely controlled by the EC will have a power supply
input.
Add a property to describe the power supply input.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260320083135.2455444-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pei Xiao <xiaopei01@kylinos.cn> says:
I might have wasted your valuable time again. Please help check the two
modifications. Thank you!
|
|
The prefix/header of a TLP that caused an error may be recorded in the AER
Capability and emitted to the kernel log in raw hex format. Document the
existence and usage of tlp-tool, which decodes the TLP Header into
human-readable form.
The TLP Header hints at the root cause of an error, yet is often ignored
because of its seeming opaqueness. Instead, PCIe errors are frequently
worked around by a change in the kernel without fully understanding the
actual source of the problem. With more documentation on available tools
we'll hopefully come up with better solutions.
There are also wireshark dissectors for TLPs, but it seems they expect a
complete TLP, not just the header, and they cannot grok the hex format
emitted by the kernel directly. tlp-tool appears to be the most cut and
dried solution out there.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Maciej Grochowski <mx2pg@pm.me>
Link: https://patch.msgid.link/bf826c41b4c1d255c7dcb16e266b52f774d944ed.1774246067.git.lukas@wunner.de
|
|
We need the latest GPU buddy changes from drm-misc-next-2026-03-12 in
drm-rust-next as well, as the Rust abstractions are built on top of it.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
'20260319-clk-qcom-dispcc-eliza-v3-1-d1f2b19a6e6b@oss.qualcomm.com' into clk-for-7.1
Merge the Eliza display clock controller binding through a topic branch,
to allow the constants to be shared with the DeviceTree branch.
|
|
Add bindings for Qualcomm Eliza SoC display clock controller (dispcc),
which is very similar to one in SM8750, except new HDMI-related clocks
and additional clock input from HDMI PHY PLL.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260319-clk-qcom-dispcc-eliza-v3-1-d1f2b19a6e6b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Canaan k230 uses the SDHCI from Synopsys. Add compatible strings
to the k230. The k230 has two controllers. MMC0 supports eMMC, while
MMC1 supports SDIO.
Signed-off-by: Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the 'hpe,gsc-dwcmshc' compatible string for the HPE GSC (ARM64
Cortex-A53) BMC SoC eMMC controller.
The HPE GSC requires access to the MSHCCS register in the SoC system
register block to configure SCG sync disable for HS200 RX delay-line
phase selection. The required 'hpe,gxp-sysreg' property takes a
phandle to the existing 'hpe,gxp-sysreg' syscon and the MSHCCS
register offset within that block.
The HPE GSC eMMC interface only exposes a single 'core' clock (no
bus clock), so clocks/clock-names are constrained to a single item.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
RV1103B uses the same DesignWare MSHC controller IP version as RK3576.
They have no "ciu-drive" nor "ciu-sample" clocks and use the phase
tuning inside the controller.
Fix it accordingly.
Fixes: 517b1e3c9455 ("dt-bindings: mmc: rockchip-dw-mshc: Add RV1103B compatible")
Suggested-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
RK35{76,88}
With the introduction of the RK3588 SoC, and RK3576 afterwards, three
register blocks have been provided for the video decoder unit instead of
just one, which are further referenced in vendor's datasheet by 'link
table', 'function' and 'cache'. The former is present at the top of the
listing, starting at video decoder unit base address.
However, while documenting RK3588, the binding broke the convention
expecting the unit address to indicate the start of the primary register
range, i.e. the 'function' block got listed before the 'link' one.
Since the binding changes have been already released and a fix would
bring up an ABI break, mark the current 'reg-names' ordering as
deprecated and introduce an alternative 'link,function,cache' listing
which follows the address-based ordering according to the TRM.
Additionally, drop the 'reg' description items as the order is not fixed
anymore, while the information they offer is not very relevant anyway.
It's worth noting there are currently no (known) users impacted by these
binding changes, since the video decoder support for the aforementioned
SoCs in mainline driver and devicetrees hasn't been released yet - it
landed in v7.0-rc1 while all DTS updates resulting from this will be
handled before v7.0 is out.
Fixes: c6ffb7e1fb90 ("media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings")
Fixes: a5c4a6526476 ("media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Rockchip Video Decoder driver expects reg-names to be mandatory for
RK3576 and RK3588 SoCs, however the binding does not currently require
the use of them.
As a consequence, driver would fail to probe with a hypothetical
devicetree that doesn't provide the reg-names for these SoCs, but which
is otherwise a perfectly valid DT from the binding perspective.
Update the binding and make reg-names required for the aforementioned
SoCs. While this change introduces an ABI break, the expected impact on
potential users would be minimal, if any, since the old SoCs are
unaffected, while the video decoder support for these newer variants in
mainline driver and devicetrees hasn't been released yet.
Moreover, this is also a prerequisite for a subsequent binding update
introducing an alternative reg-names order, according to the
address-based listing in the vendor's datasheet.
Reported-by: Conor Dooley <conor@kernel.org>
Closes: https://lore.kernel.org/all/20260227-urologist-gratitude-7984733f2d41@spud/
Fixes: c6ffb7e1fb90 ("media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings")
Fixes: a5c4a6526476 ("media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings")
Cc: stable@vger.kernel.org
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Corstone-1000-A320 platform contains an Ethos-U85 NPU. Add a
specific compatible for it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Message-Id: <20260320-dt-corstone1000-a320-v1-2-a549dfcfe8da@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
The Arm Corstone1000-A320 is a variation of the Corstone1000 with
Cortex-A320 cores and an Ethos-U85 NPU. An FVP for the platform is
available here[1].
[1] https://developer.arm.com/Tools%20and%20Software/Fixed%20Virtual%20Platforms/IoT%20FVPs
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Message-Id: <20260320-dt-corstone1000-a320-v1-1-a549dfcfe8da@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
The microchip,mpfs-gpio binding suffered greatly due to being written
with a narrow minded view of the controller, and the interrupt bits
ended up incorrect. It was mistakenly assumed that the interrupt
configuration was set by platform firmware, based on the FPGA
configuration, and that the GPIO DT nodes were the only way to really
communicate interrupt configuration to software.
Instead, the mux should be a device in its own right, and the GPIO
controllers should be connected to it, rather than to the PLIC.
Now that a binding exists for that mux, try to fix the misconceptions
in the GPIO controller binding.
Firstly, it's not possible for this controller to have fewer than 14
GPIOs, and thus 14 interrupts also. There are three controllers, with
14, 24 & 32 GPIOs each. The fabric core, CoreGPIO, can of course have
a customisable number of GPIOs.
The example is wacky too - it follows from the incorrect understanding
that the GPIO controllers are connected to the PLIC directly. They are
not however, with a mux sitting in between. Update the example to use
the mux as a parent, and the interrupt numbers at the mux for GPIO2 as
the example - rather than the strange looking, repeated <53>.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260318-fondly-tradition-90b8241f0cc8@spud
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Add device tree bindings for RTD1625.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The previous description was misleading because this hardware block is not
a PWM generator. It does not generate a signal with a specific frequency
and duty ratio.
Instead, it provides a fixed nanosecond-level adjustment to the rising/
falling edges of an existing signal.
The property name is kept as 'realtek,duty-cycle' rather than being
renamed to strictly preserve Device Tree ABI backward compatibility.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add a generic pin configuration property
"input-threshold-voltage-microvolt" to support hardware designs where the
input logic threshold is decoupled from the power supply voltage.
This property allows the pinctrl driver to configure the correct internal
reference voltage for pins that need to accept input signals at a different
voltage level than their power supply. For example, a pin powered by 3.3V
may need to accept 1.8V logic signals.
This defines the reference for VIH (Input High Voltage) and VIL (Input Low
Voltage) thresholds, enabling proper signal detection across different
voltage domains.
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1:
UAPI Changes:
math:
- provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI
mode:
- provide DRM_ARGB_GET*() macros for reading color components
Cross-subsystem Changes:
math:
- implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST()
Core Changes:
atomic:
- fix handling of colorop state in atomic updates
- provide CRTC background color
ttm:
- improve tests and doumentation
Driver Changes:
amdxdna:
- allow forcing DMA through IOMMU IOVA
- improve debugging
bridge:
- Support Lontium LT8713SX DP MST bridge plus DT bindings
imx:
- support planes behind the primary plane
- fix bus-format selection
ivpu:
- perform engine reset on TDR error
panel:
- novatek-nt36672a: Use mipi_dsi_*_multi() functions
- panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW MNF307QS3-2
renesas:
- rz-du: clean up
rockchip:
- support CRTC background color
sun4i:
- fix leak in init code
- clean up
tildc
- clean up
v3d:
- improve handling of struct v3d_stats
- improve error handling
- clean up
vkms:
- support CRTC background color
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260320082604.GA17867@linux.fritz.box
|
|
Use the existing documentation logo as the HTML favicon.
This makes generated documentation pages use a matching browser tab
icon without introducing a separate favicon asset.
Signed-off-by: Rito Rhymes <rito@ritovision.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260321125532.9568-1-rito@ritovision.com>
|
|
Do some fixes at groups() description for it to be parsed by
Sphinx and add it to the documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <799178cf30dd4022fdb1d029ba998a458e037b52.1773823995.git.mchehab+huawei@kernel.org>
|
|
This was an undefined behavior, but at least one place used private:
inside a nested struct meant to not be propagated outside it.
Kernel-doc now defines how this is propagated. So, document that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <bbe0ed698c21f3f930a561b885bc8a47824f7f1d.1773770483.git.mchehab+huawei@kernel.org>
|
|
While python internal libraries have support for unit tests, its
output is not nice. Add a helper module to improve its output.
I wrote this module last year while testing some scripts I used
internally. The initial skeleton was generated with the help of
LLM tools, but it was higly modified to ensure that it will work
as I would expect.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <37999041f616ddef41e84cf2686c0264d1a51dc9.1773074166.git.mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <d81be167b8cdeb003c1f8dcc7ad83a5ed2b520b6.1773770483.git.mchehab+huawei@kernel.org>
|
|
The symbol WALK_GET does not appears in the codebase as of
0031c06807cfa8aa. It was renamed as of 8f64fb1ccef33107. A previous
documentation update, de9414adafe4, renamed one occurrence in
path-lookup.rst, but forgot to change another occurrence later in the
file.
Fixes: de9414adafe4 ("docs: path-lookup: update WALK_GET, WALK_PUT desc")
Signed-off-by: Daniel Tang <danielzgtg.opensource@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <13011949.O9o76ZdvQC@daniel-desktop3>
|
|
The LIP6 URL no longer functions.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260310121431.362091-1-Julia.Lawall@inria.fr>
|
|
Merge "Why some bugs remain unfixed and some reports are ignored" with
the closing words while rewriting and extending the text.
The result spends fewer words on explaining things that are normal in
FLOSS -- while outlining where the kernel is different and how that
makes bug reporting more complicated than in other FLOSS projects.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <473b36fa9723c46b7167004752f097e6c26d7278.1773750701.git.linux@leemhuis.info>
|
|
Mention sending patches in the section about feedback. This syncs them
with a section a earlier patch added to reporting-issues.rst, which
was based on these sections and improved during review.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <cb219ccd15271bfb99ecce01dcbdbb03cccd7be1.1773750701.git.linux@leemhuis.info>
|
|
Text based on a section
Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
and slightly improved after review feedback.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <bc18f678b6854879dc7691ecbb762d717da4baa3.1773750701.git.linux@leemhuis.info>
|
|
Fine tuning to the intro of the reference section:
* Call the step-by-step guide what it is.
* Reorder the links to the guides on bug reporting to first mention the
most modern one.
* Many small changes to streamline the text and slightly shorten it.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <cd3ae7b1724d3b16b86488166f756a976e0ee83a.1773750701.git.linux@leemhuis.info>
|
|
Add a comment before the step-by-step guide explaining that the document
is best viewed in the rendered form, as there the internal links will
work that later patches will add.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <f8e3577df4a231b66e8f638f7b41614bf15b49ab.1773750701.git.linux@leemhuis.info>
|
|
Add Brazilian Portuguese translation of the development process
introduction (Documentation/process/1.Intro.rst), covering the
executive summary, importance of mainline code, and licensing.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Daniel Castro <arantescastro@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260317140136.29256-1-arantescastro@gmail.com>
|
|
Translate Documentation/process/maintainer-soc-clean-dts.rst into Portuguese.
Signed-off-by: Daniel Pereira <danielmaraboo@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260319115416.495020-3-danielmaraboo@gmail.com>
|
|
Translate Documentation/process/maintainer-soc.rst into Portuguese.
This is part of the effort to localize the kernel documentation.
Signed-off-by: Daniel Pereira <danielmaraboo@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260319115416.495020-2-danielmaraboo@gmail.com>
|
|
Add support for the MediaTek mt8167 SoC: the DSI PHY found
in this chip is fully compatible with the one found in the mt2701 SoC.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/92530e0a31eca1feb822f5c5fd4ac894937dd6c7.1771863641.git.l.scorcia@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add compatibles for various display-related blocks of MediaTek mt8167.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/66eafae30f9fe00b469e79d385c1ddd24d209475.1771863641.git.l.scorcia@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The Maxim DS4422/DS4424 and DS4402/DS4404 current DACs determine their
full-scale output current via external resistors (Rfs) connected to the
FSx pins. Without knowing these values, the full-scale range of the
hardware is undefined.
Add the 'maxim,rfs-ohms' property to describe these physical components.
This property is required to provide a complete description of the
hardware configuration.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add compatible strings for Maxim DS4402 and DS4404 current DACs.
These devices are 5-bit variants of the DS4422/DS4424 family.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Linux 7.0-rc4
Required for the ds4422 series which is build upon;
5187e03b817c ("iio: dac: ds4424: reject -128 RAW value")
|
|
The accelerator device supports usage statistics. This patch enables
obtaining the accelerator's usage through the "dev_usage" file.
The returned number expressed as a percentage as a percentage.
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Generalize driver_override in the driver core, providing a common
sysfs implementation and concurrency-safe accessors for bus
implementations
- Do not use driver_override as IRQ name in the hwmon axi-fan driver
- Remove an unnecessary driver_override check in sh platform_early
- Migrate the platform bus to use the generic driver_override
infrastructure, fixing a UAF condition caused by accessing the
driver_override field without proper locking in the platform_match()
callback
* tag 'driver-core-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
driver core: platform: use generic driver_override infrastructure
sh: platform_early: remove pdev->driver_override check
hwmon: axi-fan: don't use driver_override as IRQ name
docs: driver-model: document driver_override
driver core: generalize driver_override in struct device
|
|
Two categories of sched_ext diagnostics are currently undocumented:
1. Per-scheduler events sysfs file
Each active BPF scheduler exposes a set of diagnostic counters at
/sys/kernel/sched_ext/<name>/events. These counters are defined
(with detailed comments) in kernel/sched/ext_internal.h but have
no corresponding documentation in sched-ext.rst. BPF scheduler
developers must read kernel source to understand what each counter
means.
Add a description of the events file, an example of its output, and
a brief explanation of every counter.
2. Module parameters
kernel/sched/ext.c registers two parameters under the sched_ext.
prefix (slice_bypass_us, bypass_lb_intv_us) via module_param_cb()
with MODULE_PARM_DESC() strings, but sched-ext.rst makes no mention
of them. Users who need to tune bypass-mode behavior have no
in-tree documentation to consult.
Add a "Module Parameters" section documenting both knobs: their
default values, valid ranges (taken from the set_*() validators in
ext.c), and the note from the source that they are primarily for
debugging.
No functional changes.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add compatible strings for the LTC2654 quad-channel DAC family.
The LTC2654 devices are 4-channel, 16-/12-bit DACs with an internal
reference and SPI interface. They use the same 24-bit SPI command
format as the LTC2632/2634/2636 family.
The 16-bit variants (LTC2654-L16 and LTC2654-H16) require new
compatible strings, as no existing compatibles support 16-bit
resolution.
The 12-bit variants (LTC2654-L12 and LTC2654-H12) are register-
compatible with LTC2634-L12 and LTC2634-H12 respectively, and can
use them as fallback compatibles.
Signed-off-by: David Marinovic <david.marinovic@pupin.rs>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
These sensors can accept 2 supplies - one for the sensor and one for IR
LED [1]. Add supply properties for the sensor - 2 for the sensors and
one external, for their open drain interrupt line, to ensure the sensor
is powered on before proceeding with setup.
[1] https://www.vishay.com/docs/84274/vcnl4040.pdf
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add the adi,adxl371 compatible string to the ADXL372 binding. The
ADXL371 is a +-200g 3-axis MEMS accelerometer nearly identical to
the ADXL372 in register layout, differing only in ODR/bandwidth
values, timer scale factors, and a silicon anomaly affecting FIFO
operation.
Update the title and description to reflect both devices.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
