| Age | Commit message (Collapse) | Author |
|
By default, the Linux TCP implementation does not shrink the
advertised window (RFC 7323 calls this "window retraction") with the
following exceptions:
- When an incoming segment cannot be added due to the receive buffer
running out of memory. Since commit 8c670bdfa58e ("tcp: correct
handling of extreme memory squeeze") a zero window will be
advertised in this case. It turns out that reaching the required
memory pressure is easy when window scaling is in use. In the
simplest case, sending a sufficient number of segments smaller than
the scale factor to a receiver that does not read data is enough.
- Commit b650d953cd39 ("tcp: enforce receive buffer memory limits by
allowing the tcp window to shrink") addressed the "eating memory"
problem by introducing a sysctl knob that allows shrinking the
window before running out of memory.
However, RFC 7323 does not only state that shrinking the window is
necessary in some cases, it also formulates requirements for TCP
implementations when doing so (Section 2.4).
This commit addresses the receiver-side requirements: After retracting
the window, the peer may have a snd_nxt that lies within a previously
advertised window but is now beyond the retracted window. This means
that all incoming segments (including pure ACKs) will be rejected
until the application happens to read enough data to let the peer's
snd_nxt be in window again (which may be never).
To comply with RFC 7323, the receiver MUST honor any segment that
would have been in window for any ACK sent by the receiver and, when
window scaling is in effect, SHOULD track the maximum window sequence
number it has advertised. This patch tracks that maximum window
sequence number rcv_mwnd_seq throughout the connection and uses it in
tcp_sequence() when deciding whether a segment is acceptable.
rcv_mwnd_seq is updated together with rcv_wup and rcv_wnd in
tcp_select_window(). If we count tcp_sequence() as fast path, it is
read in the fast path. Therefore, rcv_mwnd_seq is put into rcv_wnd's
cacheline group.
The logic for handling received data in tcp_data_queue() is already
sufficient and does not need to be updated.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260309-tcp_rfc7323_retract_wnd_rfc-v3-1-4c7f96b1ec69@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document the Temperature Sensor (TSENS) on the SM8750 SoC.
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260313-sm8750_tsens-v1-1-250fcc3794a2@oss.qualcomm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
TaiqiCat (TQC) A01 is a set-top box powered by an Allwinner H6 SoC,
equipped with an AXP305 PMIC, 1GB LPDDR3 RAM, 8GB eMMC, an AP6212
WiFi/BT combo module, one 100M Ethernet port, one USB 3.0 Type-A port,
one USB 2.0 Type-A port, one Micro USB port, HDMI, SPDIF, Micro-SD, and
infrared input.
It is a blockchain-based terminal product launched by UQSoft
(Beijing UQSoft Interactive Technology Co., Ltd.), a wholly-owned
subsidiary of Ultrapower. Its dedicated product homepage[1] was once
hosted on Ultrapower’s official website[2].
It should be noted that UQSoft's official website[3] is no longer
operational, and the company appears to have been discontinued.
[1] https://web.archive.org/web/20190409213228/https://tq.ultrapower.com.cn/product.html
[2] https://www.ultrapower.com.cn
[3] http://www.uqsoft.com
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260304073430.438835-3-jerrysteve1101@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
Beijing Ultrapower Software Co., Ltd. is a company focusing on global
mobile games, ICT services, cloud computing, and artificial intelligence
solutions.
TaiqiCat A01 is a blockchain-based terminal product launched by UQSoft
(Beijing UQSoft Interactive Technology Co., Ltd.), a wholly-owned
subsidiary of Ultrapower. Its dedicated product homepage[1] was once
hosted on Ultrapower’s official website[2].
It should be noted that UQSoft's official website[3] is no longer
operational, and the company appears to have been discontinued.
[1] https://web.archive.org/web/20190409213228/https://tq.ultrapower.com.cn/product.html
[2] https://www.ultrapower.com.cn
[3] http://www.uqsoft.com
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260304073430.438835-2-jerrysteve1101@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
Document Microchip LAN969X TRNG compatible.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add bindings for lt8713sx.
Co-developed-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Cc: Simon Zhu <xmzhu@lontium.corp-partner.google.com>
Link: https://patch.msgid.link/20260303-lt8713sx-bridge-driver-v5-1-6cc2a855aafa@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Pull drm fixes from Dave Airlie:
"The weekly drm fixes. This is mostly msm fixes across the functions,
with amdgpu and i915. It also has a core rust fix and changes in
nova-core to take advantage of it, and otherwise just has some minor
driver fixes, and marks loongsoon as orphaned.
rust:
- Fix safety issue in dma_read! and dma_write!
nova-core:
- Fix UB in DmaGspMem pointer accessors
- Fix stack overflow in GSP memory allocation
loongsoon:
- mark drm driver as unmaintained
msm:
- Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
- DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM
reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
- DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels
with compression enabled
- DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
- GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
i915:
- Avoid hang when configuring VRR [icl]
- Fix sg_table overflow with >4GB folios
- Fix PSR Selective Update handling
- Fix eDP ALPM read-out sequence
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bringup hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
amdkfd:
- Fix missing BO unreserve in an error path
ivpu:
- drop unnecessary bootparams register setting
amdxdna:
- fix runtime/suspend resume deadlock
bridge:
- ti-sn65dsi83: fix DSI rounding and dual LVDS
gud:
- fix NULL crtc dereference on display disable"
* tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/amd: Set num IP blocks to 0 if discovery fails
drm/amdkfd: Unreserve bo if queue update failed
drm/amd/display: Check for S0i3 to be done before DCCG init on DCN21
drm/amd/display: Add missing DCCG register entries for DCN20-DCN316
gpu: nova-core: gsp: fix UB in DmaGspMem pointer accessors
drm/loongson: Mark driver as orphaned
accel/amdxdna: Fix runtime suspend deadlock when there is pending job
gpu: nova-core: fix stack overflow in GSP memory allocation
accel/ivpu: Remove boot params address setting via MMIO register
drm/i915/dp: Read ALPM caps after DPCD init
drm/i915/psr: Write DSC parameters on Selective Update in ET mode
drm/i915/dsc: Add helper for writing DSC Selective Update ET parameters
drm/i915/dsc: Add Selective Update register definitions
drm/i915/psr: Repeat Selective Update area alignment
drm/i915: Fix potential overflow of shmem scatterlist length
drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL
drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output
drm/bridge: ti-sn65dsi83: fix CHA_DSI_CLK_RANGE rounding
drm/gud: fix NULL crtc dereference on display disable
drm/sitronix/st7586: fix bad pixel data due to byte swap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix data races flagged by KCSAN: add missing READ_ONCE()/WRITE_ONCE()
annotations for lock-free accesses to module parameters and dsq->seq
- Fix silent truncation of upper 32 enqueue flags (SCX_ENQ_PREEMPT and
above) when passed through the int sched_class interface
- Documentation updates: scheduling class precedence, task ownership
state machine, example scheduler descriptions, config list cleanup
- Selftest fix for format specifier and buffer length in
file_write_long()
* tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use WRITE_ONCE() for the write side of scx_enable helper pointer
sched_ext: Fix enqueue_task_scx() truncation of upper enqueue flags
sched_ext: Documentation: Update sched-ext.rst
sched_ext: Use READ_ONCE() for scx_slice_bypass_us in scx_bypass()
sched_ext: Documentation: Mention scheduling class precedence
sched_ext: Document task ownership state machine
sched_ext: Use READ_ONCE() for lock-free reads of module param variables
sched_ext/selftests: Fix format specifier and buffer length in file_write_long()
sched_ext: Use WRITE_ONCE() for the write side of dsq->seq update
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of device ID and quirk updates, plus a bunch of small fixes
most of which (other than the Cadence one) are unremarkable error
handling fixes"
* tag 'spi-fix-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atcspi200: Handle invalid buswidth and fix compiler warning
spi: dt-bindings: sun6i: Allow Dual SPI and Quad SPI for newer SoCs
spi: intel-pci: Add support for Nova Lake mobile SPI flash
spi: cadence-qspi: Fix requesting of APB and AHB clocks on JH7110
spi: rockchip-sfc: Fix double-free in remove() callback
spi: atcspi200: Fix double-free in atcspi_configure_dma()
spi: amlogic: spifc-a4: Fix DMA mapping error handling
|
|
Add dt bindings for:
Armada 7020 COM Express CPU module
Falcon DB-98CX85x0 COM Express type 7 Carrier board
Falcon DB-98CX85x0 COM Express type 7 Carrier board
with an Armada 7020 COM Express CPU module
Signed-off-by: Elad Nachman <enachman@marvell.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Convert fsl-mx25-tcq.txt to yaml.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260211-yaml_mfd-v1-1-05cb48bc6f09@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The UART of SpacemiT K3 SoC has same clock property as K1 generation which
request two clock sources, fix the binding otherwise will get DT check
warnings.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260304-01-uart-clock-names-v1-1-338483f04a8b@kernel.org
Signed-off-by: Yixun Lan <dlan@kernel.org>
|
|
Convert the ISL12026 RTC binding from text format to YAML schema.
Remove the legacy text binding.
The new schema enables dtbs_check validation.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260227185115.174997-1-piyushpatle228@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Document amlogic,a4-pwm amlogic,a5-pwm and amlogic,t7-pwm
compatible, which falls back to the meson-s4-pwm group.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260312-pwm_binding-v1-1-515cb65add98@amlogic.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
In case the VDD supply voltage regulator of the RTC needs to be
specified explicitly, allow to set vdd-supply.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260309085749.25747-2-frieder@fris.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
There is a duplicated unspec entry. Remove it.
No user impact expected, found by inspection.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260311-b4-drop_dup_unspec-v1-1-e0dfa47b5981@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix spelling mistake "Crate" to "Create" in the documentation.
Signed-off-by: ShravyaPanchagiri <shravy112@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260311030450.8461-1-shravy112@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc4).
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
db25c42c2e1f9 ("net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ")
dff1c3164a692 ("net/mlx5e: SHAMPO, Always calculate page size")
https://lore.kernel.org/aa7ORohmf67EKihj@sirena.org.uk
drivers/net/ethernet/ti/am65-cpsw-nuss.c
840c9d13cb1ca ("net: ethernet: ti: am65-cpsw-nuss: Fix rx_filter value for PTP support")
a23c657e332f2 ("net: ethernet: ti: am65-cpsw: Use also port number to identify timestamps")
https://lore.kernel.org/abK3EkIXuVgMyGI7@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.
|
|
According to the "Arm Generic Interrupt Controller (GIC) Architecture
Specification, v3 and v4", revision H.b[1], there can be only 64
Extended PPI interrupts.
[1] https://developer.arm.com/documentation/ihi0069/hb/
Fixes: 4b049063e0bcbfd3 ("dt-bindings: interrupt-controller: arm,gic-v3: Describe EPPI range support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Brain-farted-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/3e49a63c6b2b6ee48e3737adee87781f9c136c5f.1772792753.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The RTC on mpfs and pic64gx has a reset pin, but until now this has been
undocumented because platform firmware takes the RTC out of reset on
first-party boards (or those using modified versions of the vendor
firmware), but not all boards may take this approach. Permit providing a
reset in devicetree for Linux, or other devicetree-consuming software,
to use.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260303-flounder-slate-dd69766990ce@spud
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Amlogic A9 SoCs uses the same UART controller as S4 SoCs.
There is no need for an extra compatible line in the driver,
but add A9 compatible line for documentation.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20260303-serial-binding-v1-1-c3df2a8f6fa3@amlogic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document Microchip LAN969x USART compatible.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://patch.msgid.link/20260302112153.464422-2-robert.marko@sartura.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
The RV1103B UART is compatible with the existing DesignWare APB UART
binding. Add the rockchip,rv1103b-uart compatible string.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310000606.415206-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document that ipa on qcm2290 uses version 4.2, the same
as sc7180.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Link: https://patch.msgid.link/20260310112309.79261-2-wojciech.slenska@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When no H2G transport is loaded, vsock currently routes all CIDs to the
G2H transport (commit 65b422d9b61b ("vsock: forward all packets to the
host when no H2G is registered"). Extend that existing behavior: when
an H2G transport is loaded but does not claim a given CID, the
connection falls back to G2H in the same way.
This matters in environments like Nitro Enclaves, where an instance may
run nested VMs via vhost-vsock (H2G) while also needing to reach sibling
enclaves at higher CIDs through virtio-vsock-pci (G2H). With the old
code, any CID > 2 was unconditionally routed to H2G when vhost was
loaded, making those enclaves unreachable without setting
VMADDR_FLAG_TO_HOST explicitly on every connect.
Requiring every application to set VMADDR_FLAG_TO_HOST creates friction:
tools like socat, iperf, and others would all need to learn about it.
The flag was introduced 6 years ago and I am still not aware of any tool
that supports it. Even if there was support, it would be cumbersome to
use. The most natural experience is a single CID address space where H2G
only wins for CIDs it actually owns, and everything else falls through to
G2H, extending the behavior that already exists when H2G is absent.
To give user space at least a hint that the kernel applied this logic,
automatically set the VMADDR_FLAG_TO_HOST on the remote address so it
can determine the path taken via getpeername().
Add a per-network namespace sysctl net.vsock.g2h_fallback (default 1).
At 0 it forces strict routing: H2G always wins for CID > VMADDR_CID_HOST,
or ENODEV if H2G is not loaded.
Signed-off-by: Alexander Graf <graf@amazon.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260304230027.59857-1-graf@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Biju Das needs a patch for rz-du merged in 7.0-rc3
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v7.0:
Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels with
compression enabled
DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV00wZ95gFDLfzJ0Ywb8rsjPSjZ1aHdwE4smnyuZ=Fg-g8Q@mail.gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Add missing entry for sysctl_tcp_shrink_window.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260310073855.564927-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As stated in [1] the Baikal platforms are not supported and
the respective driver code has just been removed. Remove
unused bindings.
Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260227072726.1142944-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
clk-for-7.1
Merge DeviceTree bindings for Eliza global, rpmh, and tcsr clock
controllers through a topic branch, in case we need them in the
DeviceTree branch as well.
|
|
Update the documentation for RPMH clock controller for Eliza SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-clocks-v6-3-453c4cf657a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for TCSR Clock Controller for Eliza SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-clocks-v6-2-453c4cf657a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the Global Clock Controller on Qualcomm
Eliza SoC. Reuse the Milos bindings schema since the controller resources
are exactly the same, even though the controllers are incompatible between
them.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-clocks-v6-1-453c4cf657a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
GPIOs with "gpio" suffix were long time ago deprecated, thus
"reset-gpios" should be used. Linux kernel supports both, thus this
only documents desired choice of ABI.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260311153548.94265-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A recently added quirk does not fit in the left column of the table,
so it all has to be reformatted and realigned.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM to allow L1 to set
FREEZE_IN_SMM in vmcs12's GUEST_IA32_DEBUGCTL field, as permitted
prior to commit 6b1dd26544d0 ("KVM: VMX: Preserve host's
DEBUGCTLMSR_FREEZE_IN_SMM while running the guest"). Enable the quirk
by default for backwards compatibility (like all quirks); userspace
can disable it via KVM_CAP_DISABLE_QUIRKS2 for consistency with the
constraints on WRMSR(IA32_DEBUGCTL).
Note that the quirk only bypasses the consistency check. The vmcs02 bit is
still owned by the host, and PMCs are not frozen during virtualized SMM.
In particular, if a host administrator decides that PMCs should not be
frozen during physical SMM, then L1 has no say in the matter.
Fixes: 095686e6fcb4 ("KVM: nVMX: Check vmcs12->guest_ia32_debugctl on nested VM-Enter")
Cc: stable@vger.kernel.org
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260205231537.1278753-1-jmattson@google.com
[sean: tag for stable@, clean-up and fix goofs in the comment and docs]
Signed-off-by: Sean Christopherson <seanjc@google.com>
[Rename quirk. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
HEAD
KVM generic changes for 7.0
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being
unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end.
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite being
rather unintuitive.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Correct MSI allocation tracking
- Always use 64 bits PTE for powerpc/e500
- Fix inline assembly for clang build on PPC32
- Fixes for clang build issues in powerpc64/ftrace
- Fixes for powerpc64/bpf JIT and tailcall support
- Cleanup MPC83XX devicetrees
- Fix keymile vendor prefix
- Fix to use big-endian types for crash variables
Thanks to Abhishek Dubey, Christophe Leroy (CS GROUP), Hari Bathini,
Heiko Schocher, J. Neuschäfer, Mahesh Salgaonkar, Nam Cao, Nilay Shroff,
Rob Herring (Arm), Saket Kumar Bhaskar, Sourabh Jain, Stan Johnson, and
Venkat Rao Bagalkote.
* tag 'powerpc-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (23 commits)
powerpc/pseries: Correct MSI allocation tracking
powerpc: dts: mpc83xx: Add unit addresses to /memory
powerpc: dts: mpc8315erdb: Add missing #cells properties to SPI bus
powerpc: dts: mpc8315erdb: Rename LED nodes to comply with schema
powerpc: dts: mpc8315erdb: Use IRQ_TYPE_* macros
powerpc: dts: mpc8313erdb: Use IRQ_TYPE_* macros
powerpc: 83xx: km83xx: Fix keymile vendor prefix
dt-bindings: powerpc: Add Freescale/NXP MPC83xx SoCs
powerpc64/bpf: fix kfunc call support
powerpc64/bpf: fix handling of BPF stack in exception callback
powerpc64/bpf: remove BPF redzone protection in trampoline stack
powerpc64/bpf: use consistent tailcall offset in trampoline
powerpc64/bpf: fix the address returned by bpf_get_func_ip
powerpc64/bpf: do not increment tailcall count when prog is NULL
powerpc64/ftrace: workaround clang recording GEP in __patchable_function_entries
powerpc64/ftrace: fix OOL stub count with clang
powerpc64: make clang cross-build friendly
powerpc/crash: adjust the elfcorehdr size
powerpc/kexec/core: use big-endian types for crash variables
powerpc/prom_init: Fixup missing #size-cells on PowerMac media-bay nodes
...
|
|
Example is wrong, the reg property of the flash is always matching the
node name.
Fixes: 68cd8ef48452 ("dt-bindings: mtd: st,spear600-smi: convert to DT schema")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
These properties must be set because they overwrite the default values,
especially #size-cells which is 0 for most controllers and is 'const: 1'
here.
Fixes: 68cd8ef48452 ("dt-bindings: mtd: st,spear600-smi: convert to DT schema")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The description mixes two nodes. There is the controller, and there is
the flash. Describe the flash (which itself can be considered an mtd
device, unlike the top level controller), and move the st,smi-fast-mode
property inside, as this property is flash specific and should not live
in the parent controller node.
Fixes: 68cd8ef48452 ("dt-bindings: mtd: st,spear600-smi: convert to DT schema")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Some USB devices incorrectly report bNumConfigurations as 0 in their
device descriptor, which causes the USB core to reject them during
enumeration.
logs:
usb 1-2: device descriptor read/64, error -71
usb 1-2: no configurations
usb 1-2: can't read configurations, error -22
However, these devices actually work correctly when
treated as having a single configuration.
Add a new quirk USB_QUIRK_FORCE_ONE_CONFIG to handle such devices.
When this quirk is set, assume the device has 1 configuration instead
of failing with -EINVAL.
This quirk is applied to the device with VID:PID 5131:2007 which
exhibits this behavior.
Signed-off-by: Jie Deng <dengjie03@kylinos.cn>
Link: https://patch.msgid.link/20260227084931.1527461-1-dengjie03@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert legacy maxim,max3421.txt to proper format.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Link: https://patch.msgid.link/20260225014751.9121-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add additional properties for ports supporting sink mode. The properties
define certain hardware and electrical properties such as sink load
step, sink load characteristics, sink compliance and charging adapter
Power Delivery Profile (PDP) for the connector. These properties need to
be defined for a Type-C port in compliance with the PD 3.1 spec.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260223-skedb-v2-1-60675765bc7e@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the ETEK Micro ET7304 USB Type-C Port Controller with USB-PD.
Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220-et7304-v3-1-ede2d9634957@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Milos
Some of the controllers found of these platforms can be tied up to a
single high-speed PHY, basically rendering them as USB 2.0 controllers.
So in this case, the interrupt to the Synopsys DesignWare Core is coming
from the high-speed PHY, so allow the interrupt to reflect that.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Tested-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Link: https://patch.msgid.link/20260309-dts-qcom-glymur-add-usb-support-v4-1-6bdc41f58d18@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The musb IP on mpfs and pic64gx has a reset pin, but until now this has
been undocumented because platform firmware takes the block out of reset
on first-party boards (or those using modified versions of the vendor
firmware), but not all boards may take this approach. Permit providing a
reset in devicetree for Linux, or other devicetree-consuming software,
to use.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260303-backspace-unhearing-c6cc8cbddbba@spud
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|