| Age | Commit message (Collapse) | Author |
|---|
|
Reference usb-xhci.yaml in host mode in order to support on-board USB
hubs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260226153859.665901-2-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bias properties
It is possible that devices tristate buffers may set the buffer to
the high-Z state in addition to setting pull-up or pull-down on a pin.
Remove this particular restriction to prevent warning on zynqmp systems
where this configuration seems to be valid.
Reported-by: Rob Herring (Arm) <robh@kernel.org>
Fixes: a901e8705f89f ("dt-bindings: pinctrl: pincfg-node: add restrictions on conflicting properties")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Support for Dual SPI and Quad SPI was added to the Linux driver in
commit 0605d9fb411f ("spi: sun6i: add quirk for dual and quad SPI modes
support") and commit 25453d797d7a ("spi: sun6i: add dual and quad SPI
modes support for R329/D1/R528/T113s").
However the binding was never updated to allow these modes. Allow them
by adding 2 and 4 to the allowed bus widths for the newer variants.
While at it, also add 0 to the allowed bus widths. This signals that
RX or TX is not available, i.e. the MISO or MOSI pin is disconnected.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260302153559.3199783-2-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Requested by Maxime Ripard for drm-misc-next because renesas people need
fb797a70108f ("drm: renesas: rz-du: mipi_dsi: Set DSI divider").
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
|
|
Samsung S2MU005 is a PMIC device which has LED controllers, an MUIC and
a battery charger. The battery charger is paired with an independent
device connected via I2C which can be used to access various metrics of
the battery. Document the device as a schema.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://patch.msgid.link/20260304-s2mu005-fuelgauge-v3-1-e4dc4e47cde8@disroot.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
AIC version 3 as found on the Apple M3 (t8122) is very similar to AICv2 in
its base functionality. It can use the same device tree bindings as AICv2
so add it to the AICv2 bindings. This interrupt controller is used on all
Apple SoCs starting with M3 up to at least M5.
The only apparent difference is the increased IRQ config offset. Apple's
device tree codes this new offset as property of the "aic" node but the
value stayed constant for all SoCs with "aic,3". Since the SoC specific
compatible "apple,t8122-aic3" will be only used in the driver this offset
can remain a driver implementation detail.
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260223-irq-apple-aic3-v3-1-2b7328076b8d@jannau.net
|
|
Merge branch adding support for device-managed workqueue allocation,
which allows cleaning up a couple of power-supply drivers.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
With the current port selection algorithm, ports after a reserved port
range or long time used port are used more often than others [1]. This
causes an uneven port usage distribution. This combines with cloud
environments blocking connections between the application server and the
database server if there was a previous connection with the same source
port, leading to connectivity problems between applications on cloud
environments.
The real issue here is that these firewalls cannot cope with
standards-compliant port reuse. This is a workaround for such situations
and an improvement on the distribution of ports selected.
The proposed solution is to implement a variant of RFC 6056 Algorithm 5.
The step size is selected randomly on every connect() call ensuring it
is a coprime with respect to the size of the range of ports we want to
scan. This way, we can ensure that all ports within the range are
scanned before returning an error. To enable this algorithm, the user
must configure the new sysctl option "net.ipv4.ip_local_port_step_width".
In addition, on graphs generated we can observe that the distribution of
source ports is more even with the proposed approach. [2]
[1] https://0xffsoftware.com/port_graph_current_alg.html
[2] https://0xffsoftware.com/port_graph_random_step_alg.html
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260309023946.5473-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document missing SMC sysctl parameters limit_smc_hs and hs_ctrl
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: D. Wythe<alibuda@linux.alibaba.com>
Link: https://patch.msgid.link/20260309124541.22723-3-sawara04.o@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
smcr_buf_type section used inconsistent indentation compared
with the rest of this document.
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: D. Wythe<alibuda@linux.alibaba.com>
Link: https://patch.msgid.link/20260309124541.22723-2-sawara04.o@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The IMX355 camera sensor is a camera sensor that can be found as the
front camera in some smartphones, such as the Pixel 3, Pixel 3 XL, Pixel
3a, and Pixel 3a XL. It already has a driver, but needs support for
device tree. Document the IMX355 to support defining it in device tree.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The clock-lanes property has no effect on the hardware configuration, as
of commit 336136e197e2 ("media: dt-bindings: media: camss: Remove
clock-lane property"). Since boards with new camss support can omit the
property, remove it from the required lists.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add properties update and new sram property necessary in order
to enable the DMA-MDMA chaining.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The Aptina MI1040 is a slightly different version of the MT9M114 camera
module. It is used in several devices, such as the ASUS Nexus 7 (2012) and
the ASUS Transformer Prime TF201. The compatible "onnn,mt9m114" is placed
first in the enum, as it is considered the default compatible value.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
DS90UB954-Q1 is an FPDLink-III deserializer that is mostly register
compatible with DS90UB960-Q1. The main difference is that it supports
half of the RX and TX ports, i.e. 2x FPDLink RX ports and 1x CSI TX
port. Therefore, add support for DS90UB954 within the existing bindings.
Link: https://www.ti.com/lit/gpn/ds90ub954-q1
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The current bindings duplicate the port definitions for each FPD-Link RX
and CSI-2 TX ports. This results in a large amount of repeated schema
blocks and makes it harder to extend the bindings for new devices.
Refactor the bindings by introducing shared deftinitions for FPD-Link
input ports and CSI-2 output ports. No functional change intended.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The starfive-camss driver is no longer being worked upon for destaging,
and will be dropped in a subsequent commit, so drop the DT bindings.
Link: https://lore.kernel.org/all/ZQ0PR01MB13024A92926C415C187D2C18F29F2@ZQ0PR01MB1302.CHNPR01.prod.partner.outlook.cn/
Acked-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The starfive-camss driver is no longer being worked upon for destaging,
as confirmed by the maintainer, so drop it.
Link: https://lore.kernel.org/all/ZQ0PR01MB13024A92926C415C187D2C18F29F2@ZQ0PR01MB1302.CHNPR01.prod.partner.outlook.cn/
Acked-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document the 'wakeup-source' property for Sitronix ST1232 touchscreen
controllers to allow the device to wake the system from suspend.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260309000319.74880-2-phucduc.bui@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"15 hotfixes. 6 are cc:stable. 14 are for MM.
Singletons, with one doubleton - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-03-09-16-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS, mailmap: update email address for Lorenzo Stoakes
mm/mmu_notifier: clean up mmu_notifier.h kernel-doc
uaccess: correct kernel-doc parameter format
mm/huge_memory: fix a folio_split() race condition with folio_try_get()
MAINTAINERS: add co-maintainer and reviewer for SLAB ALLOCATOR
MAINTAINERS: add RELAY entry
memcg: fix slab accounting in refill_obj_stock() trylock path
mm/hugetlb.c: use __pa() instead of virt_to_phys() in early bootmem alloc code
zram: rename writeback_compressed device attr
tools/testing: fix testing/vma and testing/radix-tree build
Revert "ptdesc: remove references to folios from __pagetable_ctor() and pagetable_dtor()"
mm/cma: move put_page_testzero() out of VM_WARN_ON in cma_release()
mm/damon/core: clear walk_control on inactive context in damos_walk()
mm: memfd_luo: always dirty all folios
mm: memfd_luo: always make all folios uptodate
|
|
Add a Resource-managed version of alloc_workqueue() to fix common
problem of drivers mixing devm() calls with destroy_workqueue. Such
naive and discouraged driver approach leads to difficult to debug bugs
when the driver:
1. Allocates workqueue in standard way and destroys it in driver
remove() callback,
2. Sets work struct with devm_work_autocancel(),
3. Registers interrupt handler with devm_request_threaded_irq().
Which leads to following unbind/removal path:
1. destroy_workqueue() via driver remove(),
Any interrupt coming now would still execute the interrupt handler,
which queues work on destroyed workqueue.
2. devm_irq_release(),
3. devm_work_drop() -> cancel_work_sync() on destroyed workqueue.
devm_alloc_workqueue() has two benefits:
1. Solves above problem of mix-and-match devres and non-devres code in
driver,
2. Simplify any sane drivers which were correctly using
alloc_workqueue() + devm_add_action_or_reset().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Adds ABI documentation for the hid-lenovo-go-s and hid-lenovo-go
drivers.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
For code readability the bindings are expected to follow order shown in
example-schema.yaml - put the additionalProperties/unevaluatedProperties
entry at the end, after listing all required properties and possible
"allOf:if:then:" conditions. Meaning of this style is to close the
schema, after listing what it contains, with final "nothing more is
allowed".
Move the code around adjusting it to coding style. No functional
impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260306-dt-bindings-display-panel-clean-v1-4-3086eda1efaf@oss.qualcomm.com
|
|
The purpose of common schemas, like panel-common.yaml, is to list
applicable properties. It can list common ABI, e.g. "label" property,
and pure hardware related properties like power supply or GPIOs. In the
second case it means that all panels have these supplies or GPIOs.
This is the only meaning when hardware property is allowed in common
schema, because bindings are precise and we do not define common schemas
for "possible" hardware configurations.
Following this, all panel bindings which reference common schema and use
"unevaluatedProperties: false" do not need to list these common parts.
Simplify such bindings to also reduce copy-paste code and review time
for new contributions.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260306-dt-bindings-display-panel-clean-v1-3-3086eda1efaf@oss.qualcomm.com
|
|
This MIPI-DSI LCD panel must be connected to something. According to
scarce web data it supports two channels and it is already used like
this in DTS. Reported by dtbs_check:
rockchip/rk3399-gru-scarlet-inx.dtb: panel@0 (innolux,p097pfg): 'ports' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260306-dt-bindings-display-panel-clean-v1-2-3086eda1efaf@oss.qualcomm.com
|
|
This MIPI-DSI LCD panel must be connected to something, thus add missing
port property, already used in DTS. Reported by dtbs_check:
qcom/msm8916-samsung-gt58.dtb: panel@0 (samsung,lsl080al03): 'port' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260306-dt-bindings-display-panel-clean-v1-1-3086eda1efaf@oss.qualcomm.com
|
|
Atrix 4G and Droid X2 are based on a board called by Motorola "Mot" and
use the same 540x960 DSI video mode panel. Exact panel vendor and model
are unknown hence generic compatible based on board name "Mot" is used.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260223064630.12720-2-clamor95@gmail.com
|
|
Add the compatible for the NT37700F panel found on the Pixel 3a XL.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260310002606.16413-3-mailingradian@gmail.com
|
|
The Pixel 3a XL is code-named by Google as "bonito". The
google,bonito-tianma compatible represents a variant of the Pixel 3a XL
board with a Tianma/Novatek NT37700F panel. Document the google,bonito
board compatible and the google,bonito-tianma variant in the bindings.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260310002606.16413-2-mailingradian@gmail.com
|
|
The Jadard jd9365da-h3 driver already allows DRM to get the panel
orientation via the device tree rotation property (described in
panel-common.yaml), but it's currently not documented.
Describe it in the driver documentation to fix a dtbs_check error in
Xiaomi Mi Smart Clock x04g, where the panel is landscape-oriented.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260309180353.8220-1-l.scorcia@gmail.com
|
|
Add a new compatible for the panel TAIGUAN XTI05101-01A. This panel uses
JD9365DA-H3 IC, so add the compatible to the jd9365da-h3 binding files.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260214085409.3489057-3-yelangyan@huaqin.corp-partner.google.com
|
|
Add the "taiguanck" vendor prefix for Shenzhen Top Group Technology Co., Ltd.
The prefix is derived from the vendor's website domain:
www.taiguanck.com/en/, which uses "taiguanck" as the primary
identifier of the company.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260214085409.3489057-2-yelangyan@huaqin.corp-partner.google.com
|
|
The LXD M9189A is a 1024x600 MIPI-DSI panel.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260218-drm-panel-ek79007ad3-v4-2-8ec448bf3ede@pengutronix.de
|
|
Add vendor prefix for LXD Research & Display, LLC.
Link: https://www.lxdinc.com/
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260218-drm-panel-ek79007ad3-v4-1-8ec448bf3ede@pengutronix.de
|
|
Add Powertip PH800480T032-ZHC19 7" LCD-TFT RGB panel compatible string.
Signed-off-by: Florijan Plohl <florijan.plohl@norik.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260217123759.169317-1-florijan.plohl@norik.com
|
|
Add EDT ET057023UDBA 5.7" 24-bit 640x480 DPI panel.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260119-v6-18-topic-panel-simple-et057023udba-v2-1-3c73f0c9d87a@pengutronix.de
|
|
The Allwinner A523 SoC family features an identical LED controller as
found on the A100.
Add a SoC-specific compatible for it, with fallback to the A100 one.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260302152724.3197587-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
Merge series from Sen Wang <sen@ti.com>:
Just two minor patches that aim to tidy up the code a little bit,
as well as fix the aux_div selection in davinci_mcasp_calc_clk_div()
for mid-range dividers (33 <= div <= 4096).
Sen Wang (2):
ASoC: ti: davinci-mcasp: extract mcasp_is_auxclk_enabled() helper
ASoC: ti: davinci-mcasp: improve aux_div selection for mid-range dividers
sound/soc/ti/davinci-mcasp.c | 45 +++++++++++++++++++++++++-----------
1 file changed, 31 insertions(+), 14 deletions(-)
--
2.43.0
|
|
OPA Vnic has been abandoned and left to rot. Time to excise.
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://patch.msgid.link/177308912950.1280237.15051663328388849915.stgit@awdrv-04.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add bindings for pin controller in Milos Low Power Audio SubSystem
(LPASS).
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Document the SDM670 LMh.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260310002037.1863-3-mailingradian@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
Add the compatible for the thermal sensors on the SDM670.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260310002037.1863-2-mailingradian@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time and revert commit 22e1d0d8cda7 ("dt-bindings: arm: ti:
Add Kontron SMARC-sAM67 module").
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20260302122540.1377444-5-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time and revert commit a598ae45f48d ("dt-bindings: mfd:
sl28cpld: Add sa67mcu compatible").
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20260302122540.1377444-4-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The LED controller found in the SC2730 PMIC is compatible with the one
found in the SC2731 PMIC.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260222-sc27xx-mfd-cells-v1-2-69526fe74c77@abscue.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add the "realtek,rtl9607-gpio" compatible for GPIO nodes
on the RTL9607C SoC series.
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Sander Vanheule <sander@svanheule.net>
Link: https://patch.msgid.link/20260305161106.15999-2-adilov@disroot.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Document bindings for Tenstorrent Atlantis PRCM that manages clocks
and resets. This block is instantiated multiple times in the SoC.
This commit documents the clocks from the RCPU PRCM block.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
Update the documentation file Documentation/ABI/stable/sysfs-block to
describe the zoned_qd1_writes sysfs queue attribute file.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
TQMa8x is a SOM family using NXP i.MX8QM CPU family
MBa8x is an evaluation mainboard for this SOM.
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Commit 60f3ada4174f ("kunit: Add --list_suites to show suites") introduced
the --list_suites option to kunit.py, but the update to the corresponding
run_wrapper documentation was omitted.
Add the missing description for --list_suites to keep the documentation in
sync with the tool's supported arguments.
Fixes: 60f3ada4174f ("kunit: Add --list_suites to show suites")
Signed-off-by: Ryota Sakamoto <sakamo.ryota@gmail.com>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
