| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers-late
Amlogic Drivers for v6.19:
- Canvas device leak fix and error handling simplification
- Add more SoCs definitions
- Suport more SoCs for meson-gx-ao-secure
* tag 'amlogic-drivers-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
soc: amlogic: meson-gx-socinfo: add new SoCs id
dt-bindings: arm: amlogic: meson-gx-ao-secure: support more SoCs
soc: amlogic: canvas: simplify lookup error handling
soc: amlogic: canvas: fix device leak on lookup
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.19
MAINTAINERS:
There's some re-jigging of things to reduce duplication, by moving me
into the StarFive entry and my tree into the Microchip one. The
other platforms that I look after (SiFive and Canaan) are marked as Odd
Fixes to better represent their status. Nothing functionally changes.
Microchip:
Add adc and mmc nodes for the Beagle-V Fire.
SiFive:
Add pwm fans to the unmatched board.
StarFive:
Add the Orange PI RV board, another VisionFive 2 derived SBC. This
required moving a mmc related nodes out of the common file, into
<board>.dts. Yet more things moved out of the common file when the
VisionFive 2 Lite boards were added, which use the JH7110S SoC instead of
the JH7110. The difference here between SoCs is just temperature and
frequency ranges, but the boards differ enough that the pool of common
nodes decreases a little further. There's an eMMC and an SD variant
here, that are different SKUs, bringing the total new StarFive boards to
three.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: add Orange Pi RV
dt-bindings: riscv: starfive: add xunlong,orangepi-rv
riscv: dts: starfive: Add VisionFive 2 Lite eMMC board device tree
riscv: dts: starfive: Add VisionFive 2 Lite board device tree
riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants
riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts
dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board
MAINTAINERS: degrade RISC-V MISC SOC SUPPORT to Odd Fixes
MAINTAINERS: add tree to RISC-V Microchip entry
MAINTAINERS: remove patchwork from RISC-V MISC SOC SUPPORT
MAINTAINERS: add Conor to StarFive entry
riscv: dts: sifive: unmatched: Add PWM controlled fans
riscv: dts: microchip: enable qspi adc/mmc-spi-slot on BeagleV Fire
dts: starfive: jh7110-common: split out mmc0 reset pins from common into boards
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT Changes for v6.19:
- Fix the PCIe DBI memory region name
- Add ISP nodes for Amlogic C3
- Add power controller nodes for Amlogic S6/S7/S7D
- Add Pinctrl node for Amlogic A4
- Add AO Secure node for Amlogic S6/S7/S7D
- Add GPIO Interrupt node for Amlogic S6/S7/S7D
- Fix S922X cache layout
- New Boards:
- Tanix TX9 Pro
* tag 'amlogic-arm64-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Conflicts:
net/xdp/xsk.c
0ebc27a4c67d ("xsk: avoid data corruption on cq descriptor number")
8da7bea7db69 ("xsk: add indirect call for xsk_destruct_skb")
30ed05adca4a ("xsk: use a smaller new lock for shared pool case")
https://lore.kernel.org/20251127105450.4a1665ec@canb.auug.org.au
https://lore.kernel.org/eb4eee14-7e24-4d1b-b312-e9ea738fefee@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Online repair is now merged in upstream, no need to point to patchset
links anymore.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-11-26
this is a pull request of 27 patches for net-next/main.
The first 17 patches are by Vincent Mailhol and Oliver Hartkopp and
add CAN XL support to the CAN netlink interface.
Geert Uytterhoeven and Biju Das provide 7 patches for the rcar_canfd
driver to add suspend/resume support.
The next 2 patches are by Markus Schneider-Pargmann and add them as
the m_can maintainer.
Conor Dooley's patch updates the mpfs-can DT bindungs.
linux-can-next-for-6.19-20251126
* tag 'linux-can-next-for-6.19-20251126' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (27 commits)
dt-bindings: can: mpfs: document resets
MAINTAINERS: Simplify m_can section
MAINTAINERS: Add myself as m_can maintainer
can: rcar_canfd: Add suspend/resume support
can: rcar_canfd: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
can: rcar_canfd: Invert CAN clock and close_candev() order
can: rcar_canfd: Extract rcar_canfd_global_{,de}init()
can: rcar_canfd: Use devm_clk_get_optional() for RAM clk
can: rcar_canfd: Invert global vs. channel teardown
can: rcar_canfd: Invert reset assert order
can: dev: print bitrate error with two decimal digits
can: raw: instantly reject unsupported CAN frames
can: add dummy_can driver
can: calc_bittiming: add can_calc_sample_point_pwm()
can: calc_bittiming: add can_calc_sample_point_nrz()
can: calc_bittiming: replace misleading "nominal" by "reference"
can: netlink: add PWM netlink interface
can: calc_bittiming: add PWM calculation
can: bittiming: add PWM validation
can: bittiming: add PWM parameters
...
====================
Link: https://patch.msgid.link/20251126120106.154635-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add dt-bindings documentation of SPI NAND controller
for Airoha EN7523 SoC platform.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251125234047.1101985-3-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
debugfs access modes were added in Linux 5.10 (Dec 2020) [1], but the
no-mount mode has behaved effectively the same as the off mode since
Linux 5.12 (Apr 2021) [2]. The only difference is the specific error
code returned by the debugfs_create_* functions, which is -ENOENT in
no-mount mode and -EPERM in off mode.
Given that no-mount hasn't worked for several years with no complaints,
just remove it.
[1] a24c6f7bc923 ("debugfs: Add access restriction option")
[2] bc6de804d36b ("debugfs: be more robust at handling improper input in debugfs_lookup()")
56348560d495 ("debugfs: do not attempt to create a new file before the filesystem is initalized")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://patch.msgid.link/20251120102222.18371-3-dev@null.aaront.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fix commit converted several IPv4 address attributes from binary
to u32, but forgot to specify byte-order: big-endian. Without this,
YNL tools display IPv4 addresses incorrectly due to host-endian
interpretation.
Add the missing byte-order: big-endian to all affected u32 IPv4
address fields to ensure correct parsing and display.
Fixes: 1064d521d177 ("netlink: specs: support ipv4-or-v6 for dual-stack fields")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20251125112048.37631-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Johan Hovold <johan@kernel.org>:
This series fixes device and OF node reference leaks during probe and
a clock prepare imbalance on probe failures.
Included is a related cleanup of an error path.
|
|
Based on ext4(5) and fs/ext4/ext4.h.
For INCOMPAT_ENCRYPT, it's possible to create a new filesystem with that
flag without creating any encrypted inodes. ext4(5) says it adds
"support" but doesn't say whether anything's actually present like
COMPAT_RESIZE_INODE does.
Signed-off-by: Daniel Tang <danielzgtg.opensource@gmail.com>
Message-ID: <4506189.9SDvczpPoe@daniel-desktop3>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add kernel doc for drm_colorop objects.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-13-alex.hung@amd.com
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>:
Use container_of_const(), which is preferred over container_of(), when
the argument 'ptr' and returned pointer are already const, for better
code safety and readability.
Some drivers already have const everywhere, so container_of_const can be
directly used. In few other drivers, the final pointer can be constified
that way.
|
|
Add documentation for color pipeline API.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-4-alex.hung@amd.com
|
|
Currently even though the structures in these files have documentation,
they are not shown in the "Landlock LSM: kernel documentation" page.
Signed-off-by: Tingmao Wang <m@maowtm.org>
Link: https://lore.kernel.org/r/6050e764c2679cba01715653e5f1f4f17091d8f8.1759103277.git.m@maowtm.org
[mic: Synchronize date]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Add compatible for the compute DSP remoteproc found in SDM660.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nickolay Goppen <setotau@mainlining.org>
Link: https://lore.kernel.org/r/20251110-qcom-sdm660-cdsp-v3-2-cc3c37287e72@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since SDM660 ADSP node uses "xo" clock, interrupts and "cx" power domain
properties add corresponding constrains for SDM660 ADSP.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nickolay Goppen <setotau@mainlining.org>
Link: https://lore.kernel.org/r/20251110-qcom-sdm660-cdsp-v3-1-cc3c37287e72@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The power requirements for the CDSP instances on SC8280XP aren't fully
described, with only one of the three present. Fix that.
Fixes: ee651cd1e944 ("dt-bindings: remoteproc: qcom: pas: Add sc8280xp adsp and nsp pair")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251104-topic-8280_mxc-v1-2-df545af0ef94@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Using CX as a regulator is an artifact of earlier times. Instead use CX
power rail as power domain from rpmpd.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250621-msm8974-rpmpd-switch-v1-1-0a2cb303c446@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for i.MX91 thermal modules.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251020-imx91tmu-v7-1-48d7d9f25055@nxp.com
|
|
Add compatibility string for the thermal sensors on QCS8300 platform.
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://patch.msgid.link/20250822042316.1762153-2-quic_gkohli@quicinc.com
|
|
Expose the current system-defined list of housekeeping CPUs in a new
sysfs file: /sys/devices/system/cpu/housekeeping.
This provides userspace performance tuning tools and resource managers
with a canonical, reliable method to accurately identify the cores
responsible for essential kernel maintenance workloads (RCU, timer
callbacks, and unbound workqueues). Currently, tooling must manually
calculate the housekeeping set by parsing complex kernel boot parameters
(like isolcpus= and nohz_full=) and system topology, which is prone to
error. This dedicated file simplifies the configuration of low-latency
workloads.
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Link: https://patch.msgid.link/20251011012853.7539-2-atomlin@atomlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch introduces a new UIO driver, uio_pci_generic_sva, which
extends the functionality of uio_pci_generic by adding support for
Shared Virtual Addressing (SVA) when IOMMU is enabled in the system.
The key enhancement allows PCI devices to directly use user-space virtual
addresses for DMA operations, eliminating the need for bounce buffers or
explicit IOVA mapping. This is achieved by leveraging the kernel's IOMMU-SVA
subsystem, including process address space attachment, page fault handling,
and shared context management between CPU and device.
With this driver, userspace applications can perform zero-copy DMA using
native pointers:
void *addr = malloc(N);
set_dma_addr((uint64_t)addr); // Passing user VA directly
start_dma();
The device can now access 'addr' through the IOMMU's PASID-based translation,
provided that the underlying IOMMU hardware (e.g., Intel VT-d 3.1+, AMD-Vi,
ARM SMMU, RISCV IOMMU) and platform support SVA.
Dependencies:
- CONFIG_IOMMU_SVA must be enabled.
- The platform must support PRI (Page Request Interface) and PASID.
- Device drivers/userspace must handle page faults if demand-paging is used.
The implementation reuses core logic from uio_pci_generic.c while adding
PASID setting, and integration with the IOMMU SVA APIs.
Also, add a read-only sysfs attribute 'pasid' to expose the Process Address
Space ID assigned by IOMMU driver when binding an SVA-enabled device.
For details, refer to the ABI documentation for uio_pci_sva driver sysfs attribute
(Documentation/ABI/testing/sysfs-driver-uio_pci_sva-pasid).
Signed-off-by: Yaxing Guo <guoyaxing@bosc.ac.cn>
Link: https://patch.msgid.link/20250926095828.506-1-guoyaxing@bosc.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix below warnings generated dt_bindings_check for examples in the
bindings.
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): 'audio-codec@1,0' does not match
any of the regexes: '^pinctrl-[0-9]+$', '^slim@[0-9a-f]+$'
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): #address-cells: 1 was expected
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): 'dmas' is a required property
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): 'dma-names' is a required
property
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Fixes: 7cbba32a2d62 ("slimbus: qcom: remove unused qcom controller driver")
Cc: stable <stable@kernel.org>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110505.143105-1-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the RSPI controller on the Renesas RZ/V2N SoC. The block is
compatible with the RSPI implementation found on the RZ/V2H(P) family.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251126131619.136605-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop "uart-has-rtscts: false" from binding as the IP supports hardware
flow control on all SoCs.
Cc: stable@kernel.org
Fixes: 25422e8f46c1 ("dt-bindings: serial: Add compatible for Renesas RZ/T2H SoC in sci")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114101350.106699-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Loongson family have a mostly NS16550A-compatible UART and
High-Speed UART hardware with the exception of custom frequency divider
latch settings register.
Co-developed-by: Haowei Zheng <zhenghaowei@loongson.cn>
Signed-off-by: Haowei Zheng <zhenghaowei@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/2d858e9303d95a3e4909aa9c1379d4abbdc52cc2.1760166651.git.zhoubinbin@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-nextx
Mika writes:
thunderbolt: Changes for v6.19 merge window
This includes following USB4/Thunderbolt changes for the v6.19 merge
window:
- Documentation fixes
- Fixes for various typos found in the driver
- Replace use of system_wq with system_percpu_wq.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.19-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Fix typos in xdomain.c
thunderbolt: Fix typos in usb4.c
thunderbolt: Fix typos in tunnel.c
thunderbolt: Fix typos in tmu.c
thunderbolt: Fix typos in tb_regs.h
thunderbolt: Fix typos in tb.h
thunderbolt: Fix typos in tb.c
thunderbolt: Fix typos in switch.c
thunderbolt: Fix typos in retimer.c
thunderbolt: Fix typos in nhi.c
thunderbolt: Fix typos in lc.c
thunderbolt: Fix typos in icm.c
thunderbolt: Fix typos in domain.c
thunderbolt: Fix typos in debugfs.c
thunderbolt: Fix typos in ctl.c
thunderbolt: Replace use of system_wq with system_percpu_wq
thunderbolt: Update deprecated firmware update site in icm.c
thunderbolt: Update NVM firmware upgrade documentation
thunderbolt: Fix typo in tb_eeprom_ctl_read documentation
|
|
The CAN cores on Polarfire SoC both have a reset. The platform firmware
brings both cores out of reset, but the linux driver must use them
during normal operation. The resets should have been made required, but
this is one of the things that can happen when the binding is written
without driver support.
Fixes: c878d518d7b6 ("dt-bindings: can: mpfs: document the mpfs CAN controller")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251121-sample-footsore-743d81772efc@spud
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The Realtek SYSTIMER (System Timer) is a 64-bit global hardware counter
operating at a fixed 1MHz frequency. Thanks to its compare match
interrupt capability, the timer natively supports oneshot mode for tick
broadcast functionality.
Signed-off-by: Hao-Wen Ting <haowen.ting@realtek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251126060110.198330-2-haowen.ting@realtek.com
|
|
KVM SVM changes for 6.19:
- Fix a few missing "VMCB dirty" bugs.
- Fix the worst of KVM's lack of EFER.LMSLE emulation.
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode.
- Fix incorrect handling of selective CR0 writes when checking intercepts
during emulation of L2 instructions.
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32] on
VMRUN and #VMEXIT.
- Fix a bug where KVM corrupt the guest code stream when re-injecting a soft
interrupt if the guest patched the underlying code after the VM-Exit, e.g.
when Linux patches code with a temporary INT3.
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits to
userspace, and extend KVM "support" to all policy bits that don't require
any actual support from KVM.
|
|
The Oranth Tanix TX9 Pro is an Android STB using the Amlogic S912 chip
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250927125006.824293-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
KVM generic changes for 6.19:
- Use the recently-added WQ_PERCPU when creating the per-CPU workqueue for
irqfd cleanup.
- Fix a goof in the dirty ring documentation.
|
|
Translate .../scsi/wd719x.rst into Chinese.
Add wd719x into .../scsi/index.rst.
Update the translation through commit 40ee63091a40
("scsi: docs: convert wd719x.txt to ReST")
Signed-off-by: Yujie Zhang <yjzhang@leap-io-kernel.com>
Signed-off-by: Alex Shi <alexs@kernel.org>
|
|
Translate .../scsi/libsas.rst into Chinese.
Add libsas into .../scsi/index.rst.
Update the translation through commit 25882c82f850
("scsi: libsas: Delete lldd_clear_aca callback")
Signed-off-by: Yujie Zhang <yjzhang@leap-io-kernel.com>
Signed-off-by: Alex Shi <alexs@kernel.org>
|
|
Now sk->sk_timer is no longer used by TCP keepalive, we can use
its storage for TCP and MPTCP retransmit timers for better
cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_timer has been used for TCP keepalives.
Keepalive timers are not in fast path, we want to use sk->sk_timer
storage for retransmit timers, for better cache locality.
Create icsk->icsk_keepalive_timer and change keepalive
code to no longer use sk->sk_timer.
Added space is reclaimed in the following patch.
This includes changes to MPTCP, which was also using sk_timer.
Alias icsk->mptcp_tout_timer and icsk->icsk_keepalive_timer
for inet_sk_diag_fill() sake.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Specify value size limit for BPF_MAP_TYPE_PERCPU_ARRAY which
is PCPU_MIN_UNIT_SIZE (32 kb). In percpu allocator (mm: percpu),
any request with a size greater than PCPU_MIN_UNIT_SIZE is rejected.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251115063531.2302903-1-alex.t.tran@gmail.com
|
|
Add "xunlong,orangepi-rv" as a StarFive JH7110 SoC-based board.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: E Shattow <e@freeshell.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add device tree bindings for the StarFive JH7110S SoC
and the VisionFive 2 Lite board equipped with it.
JH7110S SoC is an industrial SoC which can run at -40~85 degrees centigrade
and up to 1.25GHz. Its CPU cores and peripherals are the same as
those of the JH7110 SoC.
VisionFive 2 Lite boards have MicroSD card version (default) and eMMC
version, which are called "VisionFive 2 Lite" and "VisionFive 2 Lite eMMC"
respectively.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Let's document how the new CPU system wakeup latency QoS limit can be used
from user space, along with how the constraint is taken into account for
s2idle and cpuidle.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman (TI) <khilman@baylibre.com>
Tested-by: Kevin Hilman (TI) <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20251125112650.329269-7-ulf.hansson@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The tsens IP found in the IPQ5018 SoC should not use qcom,tsens-v1 as
fallback since it has no RPM and, as such, must deviate from the
standard v1 init routine as this version of tsens needs to be explicitly
reset and enabled in the driver.
So let's make qcom,ipq5018-tsens a standalone compatible in the bindings.
Fixes: 77c6d28192ef ("dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20250818-ipq5018-tsens-fix-v1-1-0f08cf09182d@outlook.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek soc driver updates
This adds socinfo entries for MT8189 Kompanio 540, an extra entry
for a variant of MT8391 (AV/AZA) Genio 720 SoC, and support for
the PMIC Wrapper (by adding a compatible string) in MT8189.
* tag 'mtk-soc-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
dt-bindings: soc: mediatek: pwrap: Add compatible for MT8189 SoC
soc: mediatek: mtk-socinfo: Add entry for MT8391AV/AZA Genio 720
soc: mediatek: mtk-socinfo: Add extra entry for MT8189
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v6.19
* Add support for LAN969x, eic770 and RZ/G3S reset controllers,
for the RZ/G3S USB-PHY reset controller, and for the remaining
TH1520 reset controllers.
* Drop legacy reset control lookup code.
* Include linux/bits.h from linux/reset.h to make it self-contained.
* tag 'reset-for-v6.19' of https://git.pengutronix.de/git/pza/linux:
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/drivers
STM32 Firewall bus for v6.19, round 1
Highlights:
----------
The STM32MP21x platforms have a slightly different RIFSC. Add support
for these platforms.
Also, the RIF is a complex firewall framework which can be tricky
to debug. To facilitate the latter, add a debugfs entry that can
be used to display the whole RIFSC firewall configuration at runtime.
* tag 'stm32-bus-firewall-for-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
bus: rifsc: add debugfs entry to dump the firewall configuration
dt-bindings: bus: add stm32mp21 RIFSC compatible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.19
Support for hardware-keymanager v1 support for wrapped keys is introduce
in the ICE driver.
Support for the new Kaanapali mobile platform is added to last-level
cache controller, pd-mapper, and UBWC drivers.
UBWC driver gains support for the Monaco and Glymur platforms.
The PMIC GLINK driver is extended to handle the differences found in
targets where the related firmware runs on the SoCCP.
Support for running on targets without initialized SMEM is provided, by
reworking the SMEM driver to differentiate between "not yet probed" and
"probed but there was no SMEM". An unwanted WARN_ON() that triggered if
clients asked for a SMEM item beyond the currently running system's
limit, was removed, to allow new use cases to gracefully fail on old
targets.
The Qualcomm socinfo driver is extended with support for version 20
through 23 and support for providing version information about more than
32 remote processors. Identifiers for QCS6490 and SM8850 are also added.
Additionally, a number of smaller bug fixes and cleanups in PBS, OCMEM,
GSBI, TZMEM, and MDT-loader are included.
* tag 'qcom-drivers-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits)
soc: qcom: mdt_loader: rename 'firmware' parameter of qcom_mdt_load()
soc: qcom: mdt_loader: merge __qcom_mdt_load() and qcom_mdt_load_no_init()
soc: qcom: socinfo: Add reserve field to support future extension
soc: qcom: socinfo: Add support for new fields in revision 20
dt-bindings: firmware: qcom,scm: Document SCM on Kaanapali SOC
soc: qcom: socinfo: add support to extract more than 32 image versions
soc: qcom: smem: drop the WARN_ON() on SMEM item validation
soc: qcom: ubwc: Add config for Kaanapali
soc: qcom: socinfo: Add SoC ID for QCS6490
dt-bindings: arm: qcom,ids: Add SoC ID for QCS6490
soc: qcom: ice: Add HWKM v1 support for wrapped keys
soc: qcom: smem: better track SMEM uninitialized state
err.h: add INIT_ERR_PTR() macro
soc: qcom: smem: fix hwspinlock resource leak in probe error paths
dt-bindings: soc: qcom,aoss-qmp: Document the Glymur AOSS side channel
dt-bindings: soc: qcom,aoss-qmp: Document the Kaanapali AOSS channel
soc: qcom: ubwc: Add QCS8300 UBWC cfg
dt-bindings: firmware: qcom,scm: Document Glymur scm
soc: qcom: socinfo: Add SM8850 SoC ID
dt-bindings: arm: qcom,ids: Add SoC ID for SM8850
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add Awinic AW99706 backlight binding documentation.
Signed-off-by: Junjie Cao <caojunjie650@gmail.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251109032240.3422503-2-caojunjie650@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The register name 'HWFGWTR_EL2' and 'HWFGRTR_EL2' is wrong, should be 'HFGWTR_EL2' and 'HFGRTR_EL2'.
Find the register description on arm website here,
https://developer.arm.com/documentation/ddi0601/2025-09/AArch64-Registers/HFGWTR-EL2--Hypervisor-Fine-Grained-Write-Trap-Register
https://developer.arm.com/documentation/ddi0601/2025-09/AArch64-Registers/HFGRTR-EL2--Hypervisor-Fine-Grained-Read-Trap-Register?lang=en
Signed-off-by: Zenon Xiu <zenonxiu@outlook.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add "aspeed,ast2700-mdio" compatible to the binding schema with a fallback
to "aspeed,ast2600-mdio".
Although the MDIO controller on AST2700 is functionally the same as the
one on AST2600, it's good practice to add a SoC-specific compatible for
new silicon. This allows future driver updates to handle any 2700-specific
integration issues without requiring devicetree changes or complex
runtime detection logic.
For now, the driver continues to bind via the existing
"aspeed,ast2600-mdio" compatible, so no driver changes are needed.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Link: https://patch.msgid.link/20251120-aspeed_mdio_ast2700-v2-1-0d722bfb2c54@aspeedtech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This was added by commit 099ada2c8726 ("io_uring/rw: add write support
for IOCB_DIO_CALLER_COMP") and disabled a little later by commit
838b35bb6a89 ("io_uring/rw: disable IOCB_DIO_CALLER_COMP") because it
didn't work. Remove all the related code that sat unused for 2 years.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251113170633.1453259-2-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
